- 11 Jul, 2014 36 commits
-
-
Johan Hovold authored
commit 140cb81a upstream. The current ACM runtime-suspend implementation is broken in several ways: Firstly, it buffers only the first write request being made while suspended -- any further writes are silently dropped. Secondly, writes being dropped also leak write urbs, which are never reclaimed (until the device is unbound). Thirdly, even the single buffered write is not cleared at shutdown (which may happen before the device is resumed), something which can lead to another urb leak as well as a PM usage-counter leak. Fix this by implementing a delayed-write queue using urb anchors and making sure to discard the queue properly at shutdown. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Reported-by: Xiao Jin <jin.xiao@intel.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit e144ed28 upstream. Fix race between write() and resume() due to improper locking that could lead to writes being reordered. Resume must be done atomically and susp_count be protected by the write_lock in order to prevent racing with write(). This could otherwise lead to writes being reordered if write() grabs the write_lock after susp_count is decremented, but before the delayed urb is submitted. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust context - Move mutex_lock(acm->mutex) above acquisition of spinlocks] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 5a345c20 upstream. Fix race between write() and suspend() which could lead to writes being dropped (or I/O while suspended) if the device is runtime suspended while a write request is being processed. Specifically, suspend() releases the write_lock after determining the device is idle but before incrementing the susp_count, thus leaving a window where a concurrent write() can submit an urb. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit fb7ad4f9 upstream. Keep trying to submit urbs rather than bail out on first read-urb submission error, which would also prevent I/O for any further ports from being resumed. Instead keep an error count, for all types of failed submissions, and let USB core know that something went wrong. Also make sure to always clear the suspended flag. Currently a failed read-urb submission would prevent cached writes as well as any subsequent writes from being submitted until next suspend-resume cycle, something which may not even necessarily happen. Note that USB core currently only logs an error if an interface resume failed. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 79eed03e upstream. The delayed-write queue was never emptied at shutdown (close), something which could lead to leaked urbs if the port is closed before being runtime resumed due to a write. When this happens the output buffer would not drain on close (closing_wait timeout), and after consecutive opens, writes could be corrupted with previously buffered data, transfered with reduced throughput or completely blocked. Note that unbusy_queued_urb() was simply moved out of CONFIG_PM. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 170fad9e upstream. Fix race between write() and suspend() which could lead to writes being dropped (or I/O while suspended) if the device is runtime suspended while a write request is being processed. Specifically, suspend() releases the susp_lock after determining the device is idle but before setting the suspended flag, thus leaving a window where a concurrent write() can submit an urb. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
xiao jin authored
commit d9e93c08 upstream. We find a race between write and resume. usb_wwan_resume run play_delayed() and spin_unlock, but intfdata->suspended still is not set to zero. At this time usb_wwan_write is called and anchor the urb to delay list. Then resume keep running but the delayed urb have no chance to be commit until next resume. If the time of next resume is far away, tty will be blocked in tty_wait_until_sent during time. The race also can lead to writes being reordered. This patch put play_Delayed and intfdata->suspended together in the spinlock, it's to avoid the write race during resume. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: xiao jin <jin.xiao@intel.com> Signed-off-by: Zhang, Qi1 <qi1.zhang@intel.com> Reviewed-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: there's no need to check for portdata == NULL] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
xiao jin authored
commit db090473 upstream. When enable usb serial for modem data, sometimes the tty is blocked in tty_wait_until_sent because portdata->out_busy always is set and have no chance to be cleared. We find a bug in write error path. usb_wwan_write set portdata->out_busy firstly, then try autopm async with error. No out urb submit and no usb_wwan_outdat_callback to this write, portdata->out_busy can't be cleared. This patch clear portdata->out_busy if usb_wwan_write try autopm async with error. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: xiao jin <jin.xiao@intel.com> Signed-off-by: Zhang, Qi1 <qi1.zhang@intel.com> Reviewed-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit acf47d4f upstream. Fix potential I/O while runtime suspended due to missing PM operations in send_setup. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 80cc0fcb upstream. Make sure that needs_remote_wake up is always set when there are open ports. Currently close() would unconditionally set needs_remote_wakeup to 0 even though there might still be open ports. This could lead to blocked input and possibly dropped data on devices that do not support remote wakeup (and which must therefore not be runtime suspended while open). Add an open_ports counter (protected by the susp_lock) and only clear needs_remote_wakeup when the last port is closed. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 014333f7 upstream. The delayed-write queue was never emptied on disconnect, something which would lead to leaked urbs and transfer buffers if the device is disconnected before being runtime resumed due to a write. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 7fdd26a0 upstream. Neither the transfer buffer or the urb itself were released in the resume error path for delayed writes. Also on errors, the remainder of the queue was not even processed, which leads to further urb and buffer leaks. The same error path also failed to balance the outstanding-urb counter, something which results in degraded throughput or completely blocked writes. Fix this by releasing urb and buffer and balancing counters on errors, and by always processing the whole queue even when submission of one urb fails. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 353fe198 upstream. Fix AA deadlock in open error path that would call close() and try to grab the already held disc_mutex. Fixes: b9a44bc1 ("sierra: driver urb handling improvements") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dennis Dalessandro authored
commit 7e6d3e5c upstream. This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet. Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Mike Marciniszyn authored
commit 911eccd2 upstream. The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE. As of the dual port qib QDR card, this is not necessarily correct. Change to use the port as specified in the call. Reported-by: Alex Estrin <alex.estrin@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Maurizio Lombardi authored
commit b5b60778 upstream. The variable "size" is expressed as number of blocks and not as number of clusters, this could trigger a kernel panic when using ext4 with the size of a cluster different from the size of a block. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Jan Kara authored
commit eeece469 upstream. Tail of a page straddling inode size must be zeroed when being written out due to POSIX requirement that modifications of mmaped page beyond inode size must not be written to the file. ext4_bio_write_page() did this only for blocks fully beyond inode size but didn't properly zero blocks partially beyond inode size. Fix this. The problem has been uncovered by mmap_11-4 test in openposix test suite (part of LTP). Reported-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com> Fixes: 5a0dc736 Fixes: bd2d0210Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.2: - Adjust context - block_end was used instead of block_start + blocksize] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Andreas Schrägle authored
commit 754a292f upstream. Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID. Signed-off-by: Andreas Schrägle <ajs124.ajs124@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Chris Wilson authored
commit 9aab8bff upstream. We only want to modifiy a single field in the userspace view of the execbuffer command buffer, so explicitly change that rather than copy everything back again. This serves two purposes: 1. The single fields are much cheaper to copy (constant size so the copy uses special case code) and much smaller than the whole array. 2. We modify the array for internal use that need to be masked from the user. Note: We need this backported since without it the next bugfix will blow up when userspace recycles batchbuffers and relocations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: to_user_ptr() is open-coded] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Daniel Vetter authored
commit ff240199 upstream. These are all user-trigerable, so tune down their loudness a notch. For some of these we have i-g-t tests (because they prevent newly-discovered bugs), without this patches running the test suite leaves behind a dirty dmesg. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Krzysztof Hałasa authored
commit c7d37a66 upstream. Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> [edit commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 6d396ede upstream. The T540p has a touchpad with pnp-id LEN0034, all the models with this pnp-id have the same min/max values, except the T540p where the values are slightly off. Fix them to be identical. This is a preparation patch for simplifying the quirk table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Andrey Ryabinin authored
commit 537094b6 upstream. According to arm procedure call standart r2 register is call-cloberred. So after the result of x expression was put into r2 any following function call in p may overwrite r2. To fix this, the result of p expression must be saved to the temporary variable before the assigment x expression to __r2. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Alan Stern authored
commit 8ef42ddd upstream. Not all host controller drivers have bus-suspend and bus-resume methods. When one doesn't, it will cause problems if runtime PM is enabled in the kernel. The PM core will attempt to suspend the controller's root hub, the suspend will fail because there is no bus-suspend routine, and a -EBUSY error code will be returned to the PM core. This will cause the suspend attempt to be repeated shortly thereafter, in a never-ending loop. Part of the problem is that the original error code -ENOENT gets changed to -EBUSY in usb_runtime_suspend(), on the grounds that the PM core will interpret -ENOENT as meaning that the root hub has gotten into a runtime-PM error state. While this change is appropriate for real USB devices, it's not such a good idea for a root hub. In fact, considering the root hub to be in a runtime-PM error state would not be far from the truth. Therefore this patch updates usb_runtime_suspend() so that it adjusts error codes only for non-root-hub devices. Furthermore, the patch attempts to prevent the problem from occurring in the first place by not enabling runtime PM by default for root hubs whose host controller driver doesn't have bus_suspend and bus_resume methods. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: runtime PM is also not supported for USB 3.0 non-root hubs] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Mikulas Patocka authored
commit 972754cf upstream. I had occasional screen corruption with the matrox framebuffer driver and I found out that the reason for the corruption is that the hardware blitter accesses the videoram while it is being written to. The matrox driver has a macro WaitTillIdle() that should wait until the blitter is idle, but it sometimes doesn't work. I added a dummy read mga_inl(M_STATUS) to WaitTillIdle() to fix the problem. The dummy read will flush the write buffer in the PCI chipset, and the next read of M_STATUS will return the hardware status. Since applying this patch, I had no screen corruption at all. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Emil Goode authored
commit d1d70e5d upstream. If we fail to allocate struct platform_device pdev we dereference it after the goto label err. This bug was found using coccinelle. Fixes: afa77ef3 (ARM: mx3: dynamically allocate "ipu-core" devices) Signed-off-by: Emil Goode <emilgoode@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Jeff Mahoney authored
commit 22e7478d upstream. Prior to commit 0e4f6a79 (Fix reiserfs_file_release()), reiserfs truncates serialized on i_mutex. They mostly still do, with the exception of reiserfs_file_release. That blocks out other writers via the tailpack mutex and the inode openers counter adjusted in reiserfs_file_open. However, NFS will call reiserfs_setattr without having called ->open, so we end up with a race when nfs is calling ->setattr while another process is releasing the file. Ultimately, it triggers the BUG_ON(inode->i_size != new_file_size) check in maybe_indirect_to_direct. The solution is to pull the lock into reiserfs_setattr to encompass the truncate_setsize call as well. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Marco Stornelli authored
commit cfac4b47 upstream. Removed vmtruncate Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Bart Van Assche authored
commit 024ca901 upstream. Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops. Reported-by: Sagi Grimberg <sagig@mellanox.com> Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Kees Cook authored
commit 1b15d2e5 upstream. Some drivers use the first HID report in the list instead of using an index. In these cases, validation uses ID 0, which was supposed to mean "first known report". This fixes the problem, which was causing at least the lgff family of devices to stop working since hid_validate_values was being called with ID 0, but the devices used single numbered IDs for their reports: 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x05, /* Usage (Gamepad), */ 0xA1, 0x01, /* Collection (Application), */ 0xA1, 0x02, /* Collection (Logical), */ 0x85, 0x01, /* Report ID (1), */ ... Reported-by: Simon Wood <simon@mungewell.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Lv Zheng authored
commit 73577d1d upstream. This patch fixes the following issue: If DSDT is customized, no local DSDT copy is needed. References: https://bugzilla.kernel.org/show_bug.cgi?id=69711Signed-off-by: Enrico Etxe Arte <goitizena.generoa@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 0b5fe736 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1096436 Tested-and-reported-by: ajayr@bigfoot.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
hujianyang authored
commit 691a7c6f upstream. There is a race condition in UBIFS: Thread A (mmap) Thread B (fsync) ->__do_fault ->write_cache_pages -> ubifs_vm_page_mkwrite -> budget_space -> lock_page -> release/convert_page_budget -> SetPagePrivate -> TestSetPageDirty -> unlock_page -> lock_page -> TestClearPageDirty -> ubifs_writepage -> do_writepage -> release_budget -> ClearPagePrivate -> unlock_page -> !(ret & VM_FAULT_LOCKED) -> lock_page -> set_page_dirty -> ubifs_set_page_dirty -> TestSetPageDirty (set page dirty without budgeting) -> unlock_page This leads to situation where we have a diry page but no budget allocated for this page, so further write-back may fail with -ENOSPC. In this fix we return from page_mkwrite without performing unlock_page. We return VM_FAULT_LOCKED instead. After doing this, the race above will not happen. Signed-off-by: hujianyang <hujianyang@huawei.com> Tested-by: Laurence Withers <lwithers@guralp.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Thomas Gleixner authored
commit 1e77d0a1 upstream. Till reported that the spurious interrupt detection of threaded interrupts is broken in two ways: - note_interrupt() is called for each action thread of a shared interrupt line. That's wrong as we are only interested whether none of the device drivers felt responsible for the interrupt, but by calling multiple times for a single interrupt line we account IRQ_NONE even if one of the drivers felt responsible. - note_interrupt() when called from the thread handler is not serialized. That leaves the members of irq_desc which are used for the spurious detection unprotected. To solve this we need to defer the spurious detection of a threaded interrupt to the next hardware interrupt context where we have implicit serialization. If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we check whether the previous interrupt requested a deferred check. If not, we request a deferred check for the next hardware interrupt and return. If set, we check whether one of the interrupt threads signaled success. Depending on this information we feed the result into the spurious detector. If one primary handler of a shared interrupt returns IRQ_HANDLED we disable the deferred check of irq threads on the same line, as we have found at least one device driver who cared. Reported-by: Till Straumann <strauman@slac.stanford.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Austin Schuh <austin@peloton-tech.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Felipe Balbi authored
commit da64c27d upstream. LDISCs shouldn't call tty->ops->write() from within ->write_wakeup(). ->write_wakeup() is called with port lock taken and IRQs disabled, tty->ops->write() will try to acquire the same port lock and we will deadlock. Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Andreas Bießmann <andreas@biessmann.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Will Deacon authored
commit 498c2280 upstream. kmap_to_page returns the corresponding struct page for a virtual address of an arbitrary mapping. This works by checking whether the address falls in the pkmap region and using the pkmap page tables instead of the linear mapping if appropriate. Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is incorrectly treated as a highmem address and we can end up walking off the end of pkmap_page_table and subsequently passing junk to pte_page. This patch fixes the bound check to stay within the pkmap tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 09 Jun, 2014 4 commits
-
-
Ben Hutchings authored
-
Thomas Gleixner authored
commit 54a21788 upstream. The current implementation of lookup_pi_state has ambigous handling of the TID value 0 in the user space futex. We can get into the kernel even if the TID value is 0, because either there is a stale waiters bit or the owner died bit is set or we are called from the requeue_pi path or from user space just for fun. The current code avoids an explicit sanity check for pid = 0 in case that kernel internal state (waiters) are found for the user space address. This can lead to state leakage and worse under some circumstances. Handle the cases explicit: Waiter | pi_state | pi->owner | uTID | uODIED | ? [1] NULL | --- | --- | 0 | 0/1 | Valid [2] NULL | --- | --- | >0 | 0/1 | Valid [3] Found | NULL | -- | Any | 0/1 | Invalid [4] Found | Found | NULL | 0 | 1 | Valid [5] Found | Found | NULL | >0 | 1 | Invalid [6] Found | Found | task | 0 | 1 | Valid [7] Found | Found | NULL | Any | 0 | Invalid [8] Found | Found | task | ==taskTID | 0/1 | Valid [9] Found | Found | task | 0 | 0 | Invalid [10] Found | Found | task | !=taskTID | 0/1 | Invalid [1] Indicates that the kernel can acquire the futex atomically. We came came here due to a stale FUTEX_WAITERS/FUTEX_OWNER_DIED bit. [2] Valid, if TID does not belong to a kernel thread. If no matching thread is found then it indicates that the owner TID has died. [3] Invalid. The waiter is queued on a non PI futex [4] Valid state after exit_robust_list(), which sets the user space value to FUTEX_WAITERS | FUTEX_OWNER_DIED. [5] The user space value got manipulated between exit_robust_list() and exit_pi_state_list() [6] Valid state after exit_pi_state_list() which sets the new owner in the pi_state but cannot access the user space value. [7] pi_state->owner can only be NULL when the OWNER_DIED bit is set. [8] Owner and user space value match [9] There is no transient state which sets the user space TID to 0 except exit_robust_list(), but this is indicated by the FUTEX_OWNER_DIED bit. See [4] [10] There is no transient state which leaves owner and user space TID out of sync. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Cc: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Thomas Gleixner authored
commit 13fbca4c upstream. If the owner died bit is set at futex_unlock_pi, we currently do not cleanup the user space futex. So the owner TID of the current owner (the unlocker) persists. That's observable inconsistant state, especially when the ownership of the pi state got transferred. Clean it up unconditionally. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Cc: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Thomas Gleixner authored
commit b3eaa9fc upstream. We need to protect the atomic acquisition in the kernel against rogue user space which sets the user space futex to 0, so the kernel side acquisition succeeds while there is existing state in the kernel associated to the real owner. Verify whether the futex has waiters associated with kernel state. If it has, return -EINVAL. The state is corrupted already, so no point in cleaning it up. Subsequent calls will fail as well. Not our problem. [ tglx: Use futex_top_waiter() and explain why we do not need to try restoring the already corrupted user space state. ] Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-