1. 05 Feb, 2017 9 commits
    • Eric Dumazet's avatar
      8139cp: use napi_complete_done() · ab1e7e1d
      Eric Dumazet authored
      Use napi_complete_done() instead of __napi_complete() to :
      
      1) Get support of gro_flush_timeout if opt-in
      2) Not rearm interrupts for busy-polling users.
      3) use standard NAPI API.
      4) Eventually get rid of napi_gro_flush() in the future.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab1e7e1d
    • Eric Dumazet's avatar
      8139too: use napi_complete_done() · 617f0121
      Eric Dumazet authored
      Use napi_complete_done() instead of __napi_complete() to :
      
      1) Get support of gro_flush_timeout if opt-in
      2) Not rearm interrupts for busy-polling users.
      3) use standard NAPI API.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      617f0121
    • David S. Miller's avatar
      Merge branch 'ipv6-Improve-user-experience-with-multipath-routes' · 3976001c
      David S. Miller authored
      David Ahern says:
      
      ====================
      net: ipv6: Improve user experience with multipath routes
      
      This series closes a couple of gaps between IPv4 and IPv6 with respect
      to multipath routes:
      
      1. IPv4 allows all nexthops of multipath routes to be deleted using just
         the prefix and length; IPv6 only deletes the first nexthop for the
         route if only the prefix and length are given.
      
      2. IPv4 returns multipath routes encoded in the RTA_MULTIPATH attribute.
         IPv6 returns a series of routes with the same prefix and length - one
         for each nexthop. This happens for both dumps and notifications.
      
      IPv6 does accept RTA_MULTIPATH encoded routes, but installs them as a
      series of routes.
      
      Patch 1 addresses the first item by allowing IPv6 multipath routes to be
      deleted using just the prefix and length. Patch 2 addresses the second
      allowing IPv6 multipath routes to be returned encoded in the RTA_MULTIPATH.
      
      Patches 3 and 4 upate the RTM_{NEW,DEL}ROUTE notifications to generate
      1 notification with RTA_MULTIPATH where applicable.
      
      Patch 5 prints IPv6 addresses in compressed format when showing route
      replace errors. This was noticed testing REPLACE failures.
      
      The end result for multipath routes:
      1. Dump
         - RTA_MULTIPATH used for multipath routes
      
          $ ip -6 ro ls vrf red
          2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
          2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
          2001:db8:200::/120 metric 1024
      	    nexthop via 2001:db8:1::2  dev eth1 weight 1
      	    nexthop via 2001:db8:2::2  dev eth2 weight 1
          ...
      
      2. Route Add
         - one notification with RTA_MULTIPATH attribute
      
          $ ip -6 ro add vrf red 2001:db8:200::/120 nexthop via 2001:db8:1::2 nexthop via 2001:db8:2::2
      
          $ ip mon route
          2001:db8:200::/120 table red metric 1024
      	nexthop via 2001:db8:1::2  dev eth1 weight 1
      	nexthop via 2001:db8:2::2  dev eth2 weight 1
      
      2. Route Replace
         - one notification with RTA_MULTIPATH attribute
      
          $ ip -6 ro replace vrf red 2001:db8:200::/120 nexthop via 2001:db8:1::16 nexthop via 2001:db8:2::16
      
          $ ip mon route
          Replaced 2001:db8:200::/120 table red metric 1024
      	    nexthop via 2001:db8:1::16  dev eth1 weight 1
      	    nexthop via 2001:db8:2::16  dev eth2 weight 1
      
         - on a failure after the insertion of the first nexthop (which means
           the original route has been replaced in the FIB), a notification is
           sent with the successful nexthops and then the nexthops are deleted
           with one notification per hop. This is consistent with how it works
           today except the successful additions are coalesced into 1
           notification.
      
      3. Route Delete
         - delete of entire multipath route using prefix/length only 1
           notification is generated:
          $ ip -6 ro del vrf red 2001:db8:200::/120
      
          $ ip mon route
          Deleted 2001:db8:200::/120 table red metric 1024
      	    nexthop via 2001:db8:1::16  dev eth1 weight 1
      	    nexthop via 2001:db8:2::16  dev eth2 weight 1
      
         - if a delete request contains nexthops one notification is
           generated per nexthop deleted. This is unavoidable since IPv6
           alllows a single nexthop to be deleted within a multipath route
      
      4. Route Appends
         - IPv6 allows nexthops to be appended to an existing route. In this
           case one notification is sent for the new route with the append
           flag set.
      
          $ ip -6 ro append vrf red 2001:db8:200::/120 nexthop via 2001:db8:2::20 nexthop via 2001:db8:1::20
      
          $ ip mon route
          Append 2001:db8:200::/120 table red metric 1024
      	    nexthop via 2001:db8:1::2  dev eth1 weight 1
      	    nexthop via 2001:db8:2::2  dev eth2 weight 1
      	    nexthop via 2001:db8:2::20  dev eth2 weight 1
      	    nexthop via 2001:db8:1::20  dev eth1 weight 1
      
        - on failure of an append, a notification is sent with the route
          containing all of the nexthops successfully added, and it is
          followed by delete notifications as the hops are removed
          returning the route to its prior state. This is consistent with
          how it works today except the successful additions are coalesced
          into 1 notification.
      
      Addresses some of the inconsistencies also noted by Roopa at netdev0.1:
      https://www.netdev01.org/docs/prabhu-linux_ipv4_ipv6_inconsistencies_talk_slides.pdf
      
      v4
      - changed series to do encoding in 1 patch and updating notificatons
        in separate patches to make it easier to review and understand
      
      - 1 notification for delete when using prefix/length; 1 notification for
        append
      
      - handle delete of a single nexthop without RTA_MULTIPATH in delete request
      
      - upated commit messages and cover letter
      
      v3
      - removed the need for a user API to opt-in to change. Requiring an
        API just shifts the difference from same API with different
        behavior to different API to achieve equivalent behavior
      - route notifications changed to use RTA_MULTIPATH for add and replace
      - upated commit messages and cover letter
      
      v2
      - fixed locking in patch 1 as noted by DaveM
      - changed user API for patch 2 to require an rtmsg with RTM_F_ALL_NEXTHOPS
        set in rtm_flags
      - revamped explanation of patch 2 and cover letter
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3976001c
    • David Ahern's avatar
      net: ipv6: Use compressed IPv6 addresses showing route replace error · 7d4d5065
      David Ahern authored
      ip6_print_replace_route_err logs an error if a route replace fails with
      IPv6 addresses in the full format. e.g,:
      
      IPv6: IPV6: multipath route replace failed (check consistency of installed routes): 2001:0db8:0200:0000:0000:0000:0000:0000 nexthop 2001:0db8:0001:0000:0000:0000:0000:0016 ifi 0
      
      Change the message to dump the addresses in the compressed format.
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d4d5065
    • David Ahern's avatar
      net: ipv6: Change notifications for multipath delete to RTA_MULTIPATH · 16a16cd3
      David Ahern authored
      If an entire multipath route is deleted using prefix and len (without any
      nexthops), send a single RTM_DELROUTE notification with the full route
      using RTA_MULTIPATH. This is done by generating the skb before the route
      delete when all of the sibling routes are still present but sending it
      after the route has been removed from the FIB. The skip_notify flag
      is used to tell the lower fib code not to send notifications for the
      individual nexthop routes.
      
      If a route is deleted using RTA_MULTIPATH for any nexthops or a single
      nexthop entry is deleted, then the nexthops are deleted one at a time with
      notifications sent as each hop is deleted. This is necessary given that
      IPv6 allows individual hops within a route to be deleted.
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      16a16cd3
    • David Ahern's avatar
      net: ipv6: Change notifications for multipath add to RTA_MULTIPATH · 3b1137fe
      David Ahern authored
      Change ip6_route_multipath_add to send one notifciation with the full
      route encoded with RTA_MULTIPATH instead of a series of individual routes.
      This is done by adding a skip_notify flag to the nl_info struct. The
      flag is used to skip sending of the notification in the fib code that
      actually inserts the route. Once the full route has been added, a
      notification is generated with all nexthops.
      
      ip6_route_multipath_add handles 3 use cases: new routes, route replace,
      and route append. The multipath notification generated needs to be
      consistent with the order of the nexthops and it should be consistent
      with the order in a FIB dump which means the route with the first nexthop
      needs to be used as the route reference. For the first 2 cases (new and
      replace), a reference to the route used to send the notification is
      obtained by saving the first route added. For the append case, the last
      route added is used to loop back to its first sibling route which is
      the first nexthop in the multipath route.
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b1137fe
    • David Ahern's avatar
      net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute · beb1afac
      David Ahern authored
      IPv6 returns multipath routes as a series of individual routes making
      their display and handling by userspace different and more complicated
      than IPv4, putting the burden on the user to see that a route is part of
      a multipath route and internally creating a multipath route if desired
      (e.g., libnl does this as of commit 29b71371e764). This patch addresses
      this difference, allowing multipath routes to be returned using the
      RTA_MULTIPATH attribute.
      
      The end result is that IPv6 multipath routes can be treated and displayed
      in a format similar to IPv4:
      
          $ ip -6 ro ls vrf red
          2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
          2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
          2001:db8:200::/120 metric 1024
      	    nexthop via 2001:db8:1::2  dev eth1 weight 1
      	    nexthop via 2001:db8:2::2  dev eth2 weight 1
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      beb1afac
    • David Ahern's avatar
      net: ipv6: Allow shorthand delete of all nexthops in multipath route · 0ae81335
      David Ahern authored
      IPv4 allows multipath routes to be deleted using just the prefix and
      length. For example:
          $ ip ro ls vrf red
          unreachable default metric 8192
          1.1.1.0/24
              nexthop via 10.100.1.254  dev eth1 weight 1
              nexthop via 10.11.200.2  dev eth11.200 weight 1
          10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3
          10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3
      
          $ ip ro del 1.1.1.0/24 vrf red
      
          $ ip ro ls vrf red
          unreachable default metric 8192
          10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3
          10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3
      
      The same notation does not work with IPv6 because of how multipath routes
      are implemented for IPv6. For IPv6 only the first nexthop of a multipath
      route is deleted if the request contains only a prefix and length. This
      leads to unnecessary complexity in userspace dealing with IPv6 multipath
      routes.
      
      This patch allows all nexthops to be deleted without specifying each one
      in the delete request. Internally, this is done by walking the sibling
      list of the route matching the specifications given (prefix, length,
      metric, protocol, etc).
      
          $  ip -6 ro ls vrf red
          2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
          2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
          2001:db8:200::/120 via 2001:db8:1::2 dev eth1 metric 1024  pref medium
          2001:db8:200::/120 via 2001:db8:2::2 dev eth2 metric 1024  pref medium
          ...
      
          $ ip -6 ro del vrf red 2001:db8:200::/120
      
          $ ip -6 ro ls vrf red
          2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
          2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
          ...
      
      Because IPv6 allows individual nexthops to be deleted without deleting
      the entire route, the ip6_route_multipath_del and non-multipath code
      path (ip6_route_del) have to be discriminated so that all nexthops are
      only deleted for the latter case. This is done by making the existing
      fc_type in fib6_config a u16 and then adding a new u16 field with
      fc_delete_all_nh as the first bit.
      Suggested-by: default avatarDinesh Dutt <ddutt@cumulusnetworks.com>
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0ae81335
    • Eric Dumazet's avatar
      virtio_net: exploit napi_complete_done() return value · 4d6308aa
      Eric Dumazet authored
      Since commit 364b6055 ("net: busy-poll: return busypolling status to
      drivers"), napi_complete_done() returns a boolean that can be used
      by drivers to conditionally rearm interrupts.
      
      This patch changes virtio_net to use this boolean to avoid a bit of
      overhead for busy-poll users.
      
      Jason reports about 1.1% improvement for 1 byte TCP_RR (burst 100).
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarJason Wang <jasowang@redhat.com>
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4d6308aa
  2. 04 Feb, 2017 1 commit
    • David S. Miller's avatar
      Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · a076d1bd
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      40GbE Intel Wired LAN Driver Updates 2017-02-03
      
      This series contains updates to i40e/i40evf only.
      
      Jake fixes up the driver to not call i40e_vsi_kill_vlan() or
      i40e_vsi_add_vlan() when the PVID is set or when the VID is less than 1.
      Cleaned up a check which really is not needed since there is no real
      reason why we cannot just call i40e_del_mac_all_vlan() directly.  Renamed
      functions to better reflect their actual purpose and how they function
      in a more clear manner.
      
      Bimmy cleans up unused/deprecated macros.
      
      Mitch cleans up unused device ids which were intended for use when
      running Linux VF drivers under Hyper-V, but found to be not needed.
      Then cleaned up a function that is no longer needed since the client
      open and close functions were refactored.  Adds a sleep without timeout
      until the reply from the PF driver has been received since the iWARP
      client cannot continue until the operation has been completed.
      
      Tushar Dave fixes an issue seen on SPARC where the use of the 'packed'
      directive was causing kernel unaligned errors.
      
      Alex does a refactor to pull some data off of the stack and store it
      in the transmit buffer info section of the transmit ring.
      
      Alan fixes a bug which was caused by passing a bad register value to the
      firmware, by refactoring the macro INTRL_USEC_TO_REG into a static
      inline function.  Also added feedback to the user as to the actual
      interrupt rate limit being used when it differs from the requested limit.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a076d1bd
  3. 03 Feb, 2017 30 commits