- 22 Aug, 2017 40 commits
-
-
Willem de Bruijn authored
Remove two references to ufo in the udp send path that are no longer reachable now that ufo has been removed. Commit 85f1bd9a ("udp: consistently apply ufo or fragmentation") is a fix to ufo. It is safe to revert what remains of it. Also, no skb can enter ip_append_page with skb_is_gso true now that skb_shinfo(skb)->gso_type is no longer set in ip_append_page/_data. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by:
-
David S. Miller authored
Tonghao Zhang says: ==================== tcp: Simplify the tcp_conn_request. Just simplify the tcp_conn_request function. ==================== Signed-off-by: -
Tonghao Zhang authored
Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Tonghao Zhang authored
tcp_peer_is_proven needs a proper route to make the determination, but dst always is NULL. This bug may be there at the beginning of git tree. This does not look serious enough to deserve backports to stable versions. Signed-off-by:
-
David S. Miller authored
Haiyang Zhang says: ==================== hv_netvsc: Ethtool handler to change UDP hash levels The patch set adds the functions to switch UDP hash level between L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. The ethtool callback function is triggered by command line, and update the per device variables of the hash level. On Azure, fragmented UDP packets is not yet supported with L4 hashing, and may have high packet loss rate. Using L3 hashing is recommended in this case. This ethtool option allows a user to make this selection. ==================== Signed-off-by: -
Haiyang Zhang authored
Update Documentation/networking/netvsc.txt for UDP hash level setting and related info. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
The patch add the functions to switch UDP hash level between L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. On Azure, fragmented UDP packets have high loss rate with L4 hashing. Using L3 hashing is recommended in this case. For example, for UDP over IPv4 on eth0: To include UDP port numbers in hasing: ethtool -N eth0 rx-flow-hash udp4 sdfn To exclude UDP port numbers in hasing: ethtool -N eth0 rx-flow-hash udp4 sd To show UDP hash level: ethtool -n eth0 rx-flow-hash udp4 Signed-off-by:
-
Haiyang Zhang authored
The parameter "nvdev" is not in use. Signed-off-by:
-
Haiyang Zhang authored
The parameter "sk" is not in use. Signed-off-by:
-
David S. Miller authored
Veerasenareddy Burru says: ==================== liquidio: VF driver will notify NIC firmware of MTU change Make VF driver notify NIC firmware of MTU change. Firmware needs this information for MTU propagation and enforcement. The first patch in this series moves a macro definition to a proper place to prevent a build error in the second patch which has the code that sends the notification. Change Log: V1 -> V2 * Add "From:" line to patch #1 and #2 to give credit to the author. * In patch #2, order local variable declarations from longest to shortest line. ==================== Signed-off-by: -
Veerasenareddy Burru authored
Signed-off-by:
Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Veerasenareddy Burru authored
The macro LIO_CMD_WAIT_TM is not specific to the PF driver; it can be used by the VF driver too, so move its definition from a PF-specific header file to one that's common to PF and VF. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by:Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by: -
Salil authored
This patch adds the following support to the HNS3 driver: 1. Support to change the Maximum Transmission Unit of a port in the HNS NIC hardware. 2. Initializes the supported MTU range for the netdevice. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
David S. Miller authored
Aviad Krawczyk says: ==================== Huawei HiNIC Ethernet Driver The patch-set contains the support of the HiNIC Ethernet driver for hinic family of PCIE Network Interface Cards. The Huawei's PCIE HiNIC card is a new Ethernet card and hence there was a need of a new driver. The current driver is meant to be used for the Physical Function and there would soon be a support for Virtual Function and more features once the basic PF driver has been accepted. Changes V7 -> V8: 1. Remove unnecessary cast from void * - Stephen Hemminger comment https://lkml.org/lkml/2017/8/17/1008 Changes V6 -> V7: 1. Separate netpoll and MAINTAINERS patch - Sergei Shtylyov comment https://lkml.org/lkml/2017/8/17/479 Changes V5 -> V6: 1. Fix cover letter Message-Id Changes V4 -> V5: 1. Remove select_queue NOP - David Miller comment https://lkml.org/lkml/2017/8/16/625 Changes V3 -> V4: 1. Reverse christmas tree order - David Miller comment https://lkml.org/lkml/2017/8/3/862 Changes V2 -> V3: 1. Replace dev_ functions by netif_ functions - Joe Perches comment https://lkml.org/lkml/2017/7/19/424 2. Fix the driver directory in MAINTAINERS file - Sergei Shtylyov comment https://lkml.org/lkml/2017/7/19/615 3. Add a newline at the end of Makefile - David Miller comment https://lkml.org/lkml/2017/7/19/1345 4. Return a pointer as a val instead of in arg - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 5. Change the error labels to err_xyz - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 6. Remove check of Func Type in free function - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 7. Remove !netdev check in remove function - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 8. Use module_pci_driver - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 9. Move the PCI device ID to the .c file - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 10. Remove void * to avoid passing wrong ptr - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 Changes V1 -> V2: 1. remove driver verstion - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/372 2. replace kzalloc by devm_kzalloc for short clean - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/372 3. replace pr_ functions by dev_ functions - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/375 4. seperate last patch by moving ops to a new patch - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/377 ==================== Signed-off-by:
-
Aviad Krawczyk authored
Update MAINTAINERS file Signed-off-by:
Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by:
Zhao Chen <zhaochen6@huawei.com> Signed-off-by:
-
Aviad Krawczyk authored
Add more netdev operation - netpoll. Signed-off-by:
-
Aviad Krawczyk authored
Add ethtool operations and statistics operations. Signed-off-by:
-
Aviad Krawczyk authored
Add transmit operation for sending data by qp operations. Signed-off-by:
-
Aviad Krawczyk authored
Set the io resources in the nic and handle rx events by qp operations. Signed-off-by:
-
Aviad Krawczyk authored
Add cmdq completion handler for getting a notification about the completion of cmdq commands. Signed-off-by:
-
Aviad Krawczyk authored
Add cmdq commands for setting queue pair contexts in the nic. Signed-off-by:
-
Aviad Krawczyk authored
Initialize the completion event queues and handle ceq events by calling the registered handlers. Used for cmdq command completion. Signed-off-by:
-
Aviad Krawczyk authored
Create the work queues for cmdq and update the nic about the work queue contexts. cmdq commands are used for updating the nic about the qp contexts. Signed-off-by:
-
Aviad Krawczyk authored
Update the nic about the resources of the queue pairs. Signed-off-by:
-
Aviad Krawczyk authored
Create the resources for queue pair operations: doorbell area, consumer index address and producer index address. Signed-off-by:
-
Aviad Krawczyk authored
Create work queues for being used by the queue pairs. Signed-off-by:
-
Aviad Krawczyk authored
Create the logical queues of the nic. Signed-off-by:
-
Aviad Krawczyk authored
Add port management message for setting Rx mode in the card, used for rx_mode netdev operation. The link event handler is used for getting a notification about the link state. Signed-off-by:
-
Aviad Krawczyk authored
Add the port management commands that are sent as management messages. The port management commands are used for netdev operations. Signed-off-by:
-
Aviad Krawczyk authored
Handle aeq elements that are accumulated on the aeq by calling the registered handler for the specific event. Signed-off-by:
-
Aviad Krawczyk authored
Add the api cmd commands for sending management messages to the nic. Signed-off-by:
-
Aviad Krawczyk authored
Add the management messages for sending to api cmd and the asynchronous event handler for the completion of the messages. Signed-off-by:
-
Aviad Krawczyk authored
Update the hardware about api cmd resources and initialize it. Signed-off-by:
-
Aviad Krawczyk authored
Initialize api cmd resources as part of management initialization. Signed-off-by:
-
Aviad Krawczyk authored
Initialize hw device by calling the initialization functions of aeqs and management channel. Signed-off-by:
-
