- 03 Jun, 2021 29 commits
-
-
Shai Malin authored
This patch introduces the NVMeTCP Offload FW and HW HSI in order to initialize the IO level configuration into a per IO HW resource ("task") as part of the IO path flow. Acked-by:Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Prabhakar Kushwaha authored
This patch introduces the functionality of HW filter block. It adds and removes filters based on source and target TCP port. It also add functionality to clear all filters at once. Acked-by:
-
Shai Malin authored
This patch introduces the NVMeTCP HSI and HSI functionality in order to initialize and interact with the HW device as part of the connection level HSI. This includes: - Connection offload: offload a TCP connection to the FW. - Connection update: update the ICReq-ICResp params - Connection clear SQ: outstanding IOs FW flush. - Connection termination: terminate the TCP connection and flush the FW. Acked-by:
-
Shai Malin authored
This patch introduces the NVMeTCP device and PF level HSI and HSI functionality in order to initialize and interact with the HW device. The patch also adds qed NVMeTCP personality. This patch is based on the qede, qedr, qedi, qedf drivers HSI. Acked-by:
Dean Balandin <dbalandin@marvell.com> Signed-off-by:
-
Omkar Kulkarni authored
Add TCP_ULP as a storage common TCP offload FW resource layout. This will be used by the core driver (QED) for both the NVMeTCP and iSCSI. Acked-by:
-
Krzysztof Kozlowski authored
In two places the 'ep_desc' and 'skb' local variables are used only within if() or for() block, so they scope can be reduced which makes the entire code slightly easier to follow. No functional change. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The "continue" statement at the end of a for loop does not have an effect. Entire loop contents can be slightly simplified to increase code readability. No functional change. Suggested-by:
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: updates 2021-06-02 Please apply the following patch series for smc to netdev's net-next tree. Both patches are cleanups and remove unnecessary code. ==================== Signed-off-by: -
Julian Wiedmann authored
destroy_workqueue() already calls drain_workqueue(), which is a stronger variant of flush_workqueue(). Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
smc_lgr_cleanup() calls smcd_unregister_all_dmbs() as part of the link group termination process. This is a leftover from the times when smc_lgr_cleanup() scheduled a worker to actually free the link group. Nowadays smc_lgr_cleanup() directly calls smc_lgr_free() without any delay so an earlier dmb unregistration is no longer needed. So remove smcd_unregister_all_dmbs() and the call to it. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Convert xpcs to phylink_pcs_ops Background: the sja1105 DSA driver currently drives a Designware XPCS for SGMII and 2500base-X, and it would be nice to reuse some code with the xpcs module. This would also help consolidate the phylink_pcs_ops, since the only other dedicated PCS driver, currently, is the lynx_pcs. Therefore, this series makes the xpcs expose the same kind of API that the lynx_pcs module does. The main changes are getting rid of struct mdio_xpcs_ops, being compatible with struct phylink_pcs_ops and being less reliant on the phy_interface_t passed to xpcs_probe (now renamed to xpcs_create). This patch series is partially tested (some code paths have been covered on the NXP SJA1105 and some others with the help of Vee Khee Wong on Intel Tiger Lake / stmmac) but further testing on 10G setups would be appreciated, if possible. ==================== Signed-off-by: -
Vladimir Oltean authored
Since all the remaining members of struct mdio_xpcs_ops have direct equivalents in struct phylink_pcs_ops, it is about time we remove it altogether. Since the phylink ops return void, we need to remove the error propagation from the various xpcs methods and simply print an error message where appropriate. Since xpcs_get_state_c73() detects link faults and attempts to reset the link on its own by calling xpcs_config(), but xpcs_config() now has a lot of phylink arguments which are not needed and cannot be simply fabricated by anybody else except phylink, the actual implementation has been moved into a smaller xpcs_do_config(). The const struct mdio_xpcs_ops *priv->hw->xpcs has been removed, so we need to look at the struct mdio_xpcs_args pointer now as an indication whether the port has an XPCS or not. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Unify the 2 existing PCS drivers (lynx and xpcs) by doing a similar thing on probe, which is to have a *_create function that takes a struct mdio_device * given by the caller, and builds a private PCS structure around that. This changes stmmac to hold only a pointer to the xpcs, as opposed to the full structure. This will be used in the next patch when struct mdio_xpcs_ops is removed. Currently a pointer to struct mdio_xpcs_ops is used as a shorthand to determine whether the port has an XPCS or not. We can do the same now with the mdio_xpcs_args pointer. Signed-off-by:
-
Vladimir Oltean authored
Use the dedicated helper for abstracting away how the clause 45 address is packed in reg_addr. Signed-off-by:
-
Vladimir Oltean authored
Similar to the other recently functions, it is not necessary for xpcs_probe to be a function pointer, so export it so that it can be called directly. Signed-off-by:
-
Vladimir Oltean authored
There is no good reason why we need to go through: stmmac_xpcs_config_eee -> stmmac_do_callback -> mdio_xpcs_ops->config_eee -> xpcs_config_eee when we can simply call xpcs_config_eee. priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is done that way because the mdio_bus_data pointer might or might not be populated in all stmmac instantiations. Signed-off-by: -
Vladimir Oltean authored
Calling a function pointer with a single implementation through struct mdio_xpcs_ops is clunky, and the stmmac_do_callback system forces this to return int, even though it always returns zero. Simply remove the "validate" function pointer from struct mdio_xpcs_ops and replace it with an exported xpcs_validate symbol which is called directly by stmmac. priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is done that way because the mdio_bus_data pointer might or might not be populated in all stmmac instantiations. Signed-off-by:
-
Vladimir Oltean authored
The operating mode of the driver is currently to populate its struct mdio_xpcs_args::supported and struct mdio_xpcs_args::an_mode statically in xpcs_probe(), based on the passed phy_interface_t, and work with those. However this is not the operation that phylink expects from a PCS driver, because the port might be attached to an SFP cage that triggers changes of the phy_interface_t dynamically as one SFP module is unpluggged and another is plugged. To migrate towards that model, the struct mdio_xpcs_args should not cache anything related to the phy_interface_t, but just look up the statically defined, const struct xpcs_compat structure corresponding to the detected PCS OUI/model number. So we delete the "supported" and "an_mode" members of struct mdio_xpcs_args, and add the "id" structure there (since the ID is not expected to change at runtime). Since xpcs->supported is used deep in the code in _xpcs_config_aneg_c73(), we need to modify some function headers to pass the xpcs_compat from all callers. In turn, the xpcs_compat is always supplied externally to the xpcs module: - Most of the time by phylink - In xpcs_probe() it is needed because xpcs_soft_reset() writes to MDIO_MMD_PCS or to MDIO_MMD_VEND2 depending on whether an_mode is clause 37 or clause 73. In order to not introduce functional changes related to when the soft reset is issued, we continue to require the initial phy_interface_t argument to be passed to xpcs_probe() so we can pass this on to xpcs_soft_reset(). - stmmac_open() wants to know whether to call stmmac_init_phy() or not, and for that it looks inside xpcs->an_mode, because the clause 73 (backplane) AN modes supposedly do not have a PHY. Because we moved an_mode outside of struct mdio_xpcs_args, this is now no longer directly possible, so we introduce a helper function xpcs_get_an_mode() which protects the data encapsulation of the xpcs module and requires a phy_interface_t to be passed as argument. This function can look up the appropriate compat based on the phy_interface_t. Signed-off-by:
-
Vladimir Oltean authored
The xpcs driver has an apparently inadequate structure for the actual hardware it drives. These defines and the xpcs_probe() function would suggest that there is one PHY ID per supported PHY interface type, and the driver simply validates whether the mode it should operate in (the argument of xpcs_probe) matches what the hardware is capable of: #define SYNOPSYS_XPCS_USXGMII_ID 0x7996ced0 #define SYNOPSYS_XPCS_10GKR_ID 0x7996ced0 #define SYNOPSYS_XPCS_XLGMII_ID 0x7996ced0 #define SYNOPSYS_XPCS_SGMII_ID 0x7996ced0 #define SYNOPSYS_XPCS_MASK 0xffffffff but that is not the case, because upon closer inspection, all the above 4 PHY ID definitions are in fact equal. So it is the same XPCS that is compatible with all 4 sets of PHY interface types. This change introduces an array of struct xpcs_compat which is populated by the single struct xpcs_id instance. It also eliminates the bogus defines for multiple Synopsys XPCS PHY IDs and replaces them with a single XPCS_ID, which better reflects the way in which the hardware operates. Because we are touching this area of the code anyway, the new array of struct xpcs_compat, as well as the array of xpcs_id, have been moved towards the end of the file, since they are variable declarations not definitions. If whichever of struct xpcs_compat or struct xpcs_id need to gain a function pointer member in the future, it is easier to reference functions (no forward declarations needed) if we have the const variable declarations at the end of the file. Signed-off-by:
-
Vladimir Oltean authored
CONFIG_STMMAC_ETH selects CONFIG_PCS_XPCS, so there should be no situation where the shim should be needed. Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: hdlc_cisco: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Space prohibited between function name and open parenthesis '('. Signed-off-by:Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
-
Peng Li authored
Add spaces required after the close parenthesis '}'. Add spaces required after that ','. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo* bar" and should be "foo *bar", and "(foo*)" should be "(foo *)". Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
Zheng Yongjun authored
Fix some spelling mistakes in comments: enconding ==> encoding ambigous ==> ambiguous orignal ==> original encyption ==> encryption Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Zheng Yongjun authored
Signed-off-by:
-
- 02 Jun, 2021 11 commits
-
-
David S. Miller authored
Dmytro Linkin says: ==================== devlink: rate objects API Resending without RFC. Currently kernel provides a way to change tx rate of single VF in switchdev mode via tc-police action. When lots of VFs are configured management of theirs rates becomes non-trivial task and some grouping mechanism is required. Implementing such grouping in tc-police will bring flow related limitations and unwanted complications, like: - tc-police is a policer and there is a user request for a traffic shaper, so shared tc-police action is not suitable; - flows requires net device to be placed on, means "groups" wouldn't have net device instance itself. Taking into the account previous point was reviewed a sollution, when representor have a policer and the driver use a shaper if qdisc contains group of VFs - such approach ugly, compilated and misleading; - TC is ingress only, while configuring "other" side of the wire looks more like a "real" picture where shaping is outside of the steering world, similar to "ip link" command; According to that devlink is the most appropriate place. This series introduces devlink API for managing tx rate of single devlink port or of a group by invoking callbacks (see below) of corresponding driver. Also devlink port or a group can be added to the parent group, where driver responsible to handle rates of a group elements. To achieve all of that new rate object is added. It can be one of the two types: - leaf - represents a single devlink port; created/destroyed by the driver and bound to the devlink port. As example, some driver may create leaf rate object for every devlink port associated with VF. Since leaf have 1to1 mapping to it's devlink port, in user space it is referred as pci/<bus_addr>/<port_index>; - node - represents a group of rate objects; created/deleted by request from the userspace; initially empty (no rate objects added). In userspace it is referred as pci/<bus_addr>/<node_name>, where node name can be any, except decimal number, to avoid collisions with leafs. devlink_ops extended with following callbacks: - rate_{leaf|node}_tx_{share|max}_set - rate_node_{new|del} - rate_{leaf|node}_parent_set KAPI provides: - creation/destruction of the leaf rate object associated with devlink port - destruction of rate nodes to allow a vendor driver to free allocated resources on driver removal or due to the other reasons when nodes destruction required UAPI provides: - dumping all or single rate objects - setting tx_{share|max} of rate object of any type - creating/deleting node rate object - setting/unsetting parent of any rate object Added devlink rate object support for netdevsim driver Issues/open questions: - Does user need DEVLINK_CMD_RATE_DEL_ALL_CHILD command to clean all children of particular parent node? For example: $ devlink port function rate flush netdevsim/netdevsim10/group - priv pointer passed to the callbacks is a source of bugs; in leaf case driver can embed rate object into internal structure and use container_of() on it; in node case it cannot be done since nodes are created from userspace v1->v2: - fixed kernel-doc for devlink_rate_leaf_{create|destroy}() - s/func/function/ for all devlink port command occurences v2->v3: - devlink: - added devlink_rate_nodes_destroy() function - netdevsim: - added call of devlink_rate_nodes_destroy() function ==================== Signed-off-by: -
Dmytro Linkin authored
Add devlink rate objects section at devlink port documentation. Add devlink rate support info at netdevsim devlink documentation. Signed-off-by:
Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Dmytro Linkin authored
Test verifies that netdevsim correctly implements devlink ops callbacks that set node as a parent of devlink leaf or node rate object. Co-developed-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
-
Dmytro Linkin authored
Implement new devlink ops that allow setting rate node as a parent for devlink port (leaf) or another devlink node through devlink API. Expose parent names to netdevsim debugfs in read only mode. Co-developed-by:
-
Dmytro Linkin authored
Refactor DEVLINK_CMD_RATE_{GET|SET} command handlers to support setting a node as a parent for another rate object (leaf or node) by means of new attribute DEVLINK_ATTR_RATE_PARENT_NODE_NAME. Extend devlink ops with new callbacks rate_{leaf|node}_parent_set() to set node as a parent for rate object to allow supporting drivers to implement rate grouping through devlink. Driver implementations are allowed to support leafs or node children only. Invoking callback with NULL as parent should be threated by the driver as unset parent action. Extend rate object struct with reference counter to disallow deleting a node with any child pointing to it. User should unset parent for the child explicitly. Example: $ devlink port function rate add netdevsim/netdevsim10/group1 $ devlink port function rate add netdevsim/netdevsim10/group2 $ devlink port function rate set netdevsim/netdevsim10/group1 parent group2 $ devlink port function rate show netdevsim/netdevsim10/group1 netdevsim/netdevsim10/group1: type node parent group2 $ devlink port function rate set netdevsim/netdevsim10/group1 noparent Co-developed-by: -
Dmytro Linkin authored
Test verifies that it is possible to create, delete and set min/max tx rate of devlink rate node on netdevsim VF. Co-developed-by:
-
Dmytro Linkin authored
Implement new devlink ops that allow creation, deletion and setting of shared/max tx rate of devlink rate nodes through devlink API. Expose rate node and it's tx rates to netdevsim debugfs. Co-developed-by:
-
Dmytro Linkin authored
Implement support for DEVLINK_CMD_RATE_{NEW|DEL} commands that are used to create and delete devlink rate nodes. Add new attribute DEVLINK_ATTR_RATE_NODE_NAME that specify node name string. The node name is an alphanumeric identifier. No valid node name can be a devlink port index, eg. decimal number. Extend devlink ops with new callbacks rate_node_{new|del}() and rate_node_tx_{share|max}_set() to allow supporting drivers to implement ports rate grouping and setting tx rate of rate nodes through devlink. Expose devlink_rate_nodes_destroy() function to allow vendor driver do proper cleanup of internally allocated resources for the nodes if the driver goes down or due to any other reasons which requires nodes to be destroyed. Disallow moving device from switchdev to legacy mode if any node exists on that device. User must explicitly delete nodes before switching mode. Example: $ devlink port function rate add netdevsim/netdevsim10/group1 $ devlink port function rate set netdevsim/netdevsim10/group1 \ tx_share 10mbit tx_max 100mbit Add + set command can be combined: $ devlink port function rate add netdevsim/netdevsim10/group1 \ tx_share 10mbit tx_max 100mbit $ devlink port function rate show netdevsim/netdevsim10/group1 netdevsim/netdevsim10/group1: type node tx_share 10mbit tx_max 100mbit $ devlink port function rate del netdevsim/netdevsim10/group1 Co-developed-by: -
Dmytro Linkin authored
Test verifies that netdevsim VFs can set and retrieve shared/max tx rate through new devlink API. Co-developed-by:
-
Dmytro Linkin authored
Implement new devlink ops that allow shared and max tx rate control for devlink port rate objects (leafs) through devlink API. Expose rate values of VF ports to netdevsim debugfs. Co-developed-by:
-
Dmytro Linkin authored
Implement support for DEVLINK_CMD_RATE_SET command with new attributes DEVLINK_ATTR_RATE_TX_{SHARE|MAX} that are used to set devlink rate shared/max tx rate values. Extend devlink ops with new callbacks rate_leaf_tx_{share|max}_set() to allow supporting drivers to implement rate control through devlink. New attributes are optional. Driver implementations are allowed to support either or both of them. Shared rate example: $ devlink port function rate set netdevsim/netdevsim10/0 tx_share 10mbit $ devlink port function rate show netdevsim/netdevsim10/0 netdevsim/netdevsim10/0: type leaf tx_share 10mbit Max rate example: $ devlink port function rate set netdevsim/netdevsim10/0 tx_max 100mbit $ devlink port function rate show netdevsim/netdevsim10/0 netdevsim/netdevsim10/0: type leaf tx_max 100mbit Co-developed-by:
-
