- 17 Apr, 2023 2 commits
-
-
James Cowgill authored
This is the logical place to put the backlight device, and it also fixes a kernel crash if the MIPI host is removed. Previously the backlight device would be unregistered twice when this happened - once as a child of the MIPI host through `mipi_dsi_host_unregister`, and once when the panel device is destroyed. Fixes: 12a6cbd4 ("drm/panel: otm8009a: Use new backlight API") Signed-off-by:
James Cowgill <james.cowgill@blaize.com> Cc: stable@vger.kernel.org Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Konrad Dybcio authored
In a very peculiar case when probing and registering with the secondary DSI host succeeds, but the OF backlight or DSI attachment fails, the primary DSI device is automatically cleaned up, but the secondary one is not, leading to -EEXIST when the driver core tries to handle -EPROBE_DEFER. Unregister the DSI1 device manually on failure to prevent that. Fixes: 623a3531 ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels") Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
- 14 Apr, 2023 1 commit
-
-
Christian König authored
This reverts commit 322458c2. PMD_SHIFT is not necessary constant on all architectures resulting in build failures. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/CAKMK7uHgUuqWJuqmZKrxi2mNiqExhmMif-naYnzUSj-puW-x+A@mail.gmail.com
-
- 13 Apr, 2023 1 commit
-
-
Jeffrey Hugo authored
This reverts commit 566fc961. This exposes a userspace API that is still under debate. Revert the change before the uAPI gets exposed to avoid making a mistake. QAIC is otherwise still functional. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1681307864-3782-1-git-send-email-quic_jhugo@quicinc.com
-
- 12 Apr, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v6.4-rc1: Cross-subsystem Changes: - Convert MIPI DSIM bridge dt to yaml. Core Changes: - Fix UAF race in drm scheduler. Driver Changes: - Add primary plane positioning support to VKMS. - Convert omapdrm fbdev emulation to in-kernel client. - Assorted small fixes to vkms, vc4, nouveau, vmwgfx. Signed-off-by:
-
- 11 Apr, 2023 10 commits
-
-
Tom Rix authored
clang with W=1 reports drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c:56:35: error: unused function 'vmw_overlay' [-Werror,-Wunused-function] static inline struct vmw_overlay *vmw_overlay(struct drm_device *dev) ^ This function is not used, so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321182414.1826372-1-trix@redhat.com
-
Martin Krastev authored
Legacy Display Unit (LDU) fb dirty support used a custom fb dirty callback. Latter handled only the DIRTYFB IOCTL presentation path but not the ADDFB2/PAGE_FLIP/RMFB IOCTL path, common for Wayland compositors. Get rid of the custom callback in favor of drm_atomic_helper_dirtyfb and unify the handling of the presentation paths inside of vmw_ldu_primary_plane_atomic_update. This also homogenizes the fb dirty callbacks across all DUs: LDU, SOU and STDU. Signed-off-by:
Martin Krastev <krastevm@vmware.com> Reviewed-by:
Maaz Mombasawala <mombasawalam@vmware.com> Fixes: 2f5544ff ("drm/vmwgfx: Use atomic helper function for dirty fb IOCTL") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by:
-
Zack Rusin authored
virtualbox implemented an incomplete version of the svga device which they decided to drop soon after the initial release. The device was always broken in various ways and never supported by vmwgfx. vmwgfx should refuse to load on those configurations but currently drm has no way of reloading fbdev when the specific pci driver refuses to load, which would leave users without a usable fb. Instead of refusing to load print an error and disable a bunch of functionality that virtualbox never implemented to at least get fb to work on their setup. Signed-off-by:
-
Martin Krastev authored
This internal helper handles a type of mksstat event counter which is currently unused. Remove the routine to avoid compile warnings. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
ruanjinjie authored
The symbol is not used outside of the file, so mark it static. Fixes the following warning: ./drivers/gpu/drm/nouveau/nvkm/engine/disp/gv100.c:591:1: warning: symbol 'gv100_disp_core_mthd_base' was not declared. Should it be static? Signed-off-by:
ruanjinjie <ruanjinjie@huawei.com> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Ben Dooks authored
Make ga100_mc_device static as it isn't exported, to fix the following sparse warning: drivers/gpu/drm/nouveau/nvkm/subdev/mc/ga100.c:51:1: warning: symbol 'ga100_mc_device' was not declared. Should it be static? Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/vc4/vc4_irq.c:60:1: warning: symbol 'render_wait' was not declared. Should it be static? This variable is not used so remove it. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230406151203.1953812-1-trix@redhat.com
-
Daniel Vetter authored
Merge tag 'mediatek-drm-next-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.4 1. Add support for 10-bit overlays 2. Add MediaTek SoC DRM (vdosys1) support for mt8195 3. Change mmsys compatible for mt8195 mediatek-drm 4. Only trigger DRM HPD events if bridge is attached 5. Change the aux retries times when receiving AUX_DEFER Signed-off-by:
-
https://gitlab.freedesktop.org/drm/msmDaniel Vetter authored
main pull request for v6.4 Core Display: ============ * Bugfixes for error handling during probe * rework UBWC decoder programming * prepare_commit cleanup * bindings for SM8550 (MDSS, DPU), SM8450 (DP) * timeout calculation fixup * atomic: use drm_crtc_next_vblank_start() instead of our own custom thing to calculate the start of next vblank DP: == * interrupts cleanup DPU: === * DSPP sub-block flush on sc7280 * support AR30 in addition to XR30 format * Allow using REC_0 and REC_1 to handle wide (4k) RGB planes * Split the HW catalog into individual per-SoC files DSI: === * rework DSI instance ID detection on obscure platforms GPU: === * uapi C++ compatibility fix * a6xx: More robust gdsc reset * a3xx and a4xx devfreq support * update generated headers * various cleanups and fixes * GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path * dma-fence deadline hint support and wait-boost * a640 speedbin support * a650 speedbin support Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c: Conflict between the 7fa5047a ("drm: Use of_property_present() for testing DT property presence") and 9f251f93 ("drm/msm/adreno: Use OPP for every GPU generation"). The latter removed the of_ function call outright, so I went with what's in the PR unchanged. From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.comSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
Merge tag 'drm-habanalabs-next-2023-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains additional habanalabs driver changes for v6.4: - uAPI changes: - Add a definition of a new Gaudi2 server type. This is used by userspace to know what is the connectivity between the accelerators inside the server - New features and improvements: - speedup h/w queues test in Gaudi2 to reduce device initialization times. - Firmware related fixes: - Fixes to the handshake protocol during f/w initialization. - Sync f/w events interrupt in hard reset to avoid warning message. - Improvements to extraction of the firmware version. - Misc bug fixes and code cleanups. Notable fixes are: - Multiple fixes for interrupt handling in Gaudi2. - Unmap mapped memory in case TLB invalidation fails. Signed-off-by:
-
- 08 Apr, 2023 22 commits
-
-
Tomer Tayar authored
hl_sysfs_fini() is called only if hl_sysfs_init() completes successfully. Therefore if hl_sysfs_init() fails, need to remove any sysfs group that was added until that point. Signed-off-by:
Tomer Tayar <ttayar@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Moti Haimovski authored
HW queues testing at driver load and after reset takes a substantial amount of time. This commit reduces the queues test time in Gaudi2 devices by running all the tests in parallel instead of one after the other. Time measurements on tests duration shows that the new method is almost x100 faster than the serial approach. Signed-off-by:
Moti Haimovski <mhaimovski@habana.ai> Reviewed-by:
-
Dani Liberman authored
There is only single eq entry for arc farm sei event which aggregates events from the four arc farms. Fix the code to handle this event according to this behavior. Signed-off-by:
Dani Liberman <dliberman@habana.ai> Reviewed-by:
-
Ofir Bitton authored
Multi MSI interrupts aren't working in Gaudi1 and because of that, we are only using a single MSI interrupt. Therefore, let's remove this dead code in order to avoid confusion. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Oded Gabbay authored
Add definition of a new Gaudi2 server type. This represents the connectivity between the cards in that server type. Signed-off-by:
-
Ofir Bitton authored
Removing redundant asic prop variable as we don't need to expose this to common code. In addition, fix some typos. Signed-off-by:
-
Koby Elbaz authored
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state). Once sent, FW's CPU isn't expected to continue communicating with LKD. Therefore, the stage of waiting for COMMS_STS_OK should be skipped or else waiting for COMMS_STS_OK will simply timeout, which will trigger unexpected behavior. Signed-off-by:
Koby Elbaz <kelbaz@habana.ai> Reviewed-by:
-
Tal Cohen authored
Receiving events from FW, while the device is in hard reset, causes a warning message in Driver log. The message may point to a problem in the Driver or FW. But It also can appear as a result of events that have been sent from FW just before the hard reset. In order to avoid receiving events from FW while the device is in reset and is already in 'disabled' mode, sync the f/w events interrupt right before setting the device to 'disabled'. Signed-off-by:
Tal Cohen <talcohen@habana.ai> Reviewed-by:
-
Ofir Bitton authored
During event handling, driver sets relevant reset and user event notifier flags. Fix few wrong flags settings. Signed-off-by:
-
Tomer Tayar authored
The decoder IRQ status register may have several set bits upon an abnormal interrupt. Therefore, when setting the events mask, need to check all bits and not using if-else. Signed-off-by:
-
Tomer Tayar authored
Decoder abnormal interrupts are for errors and not for completion, so rename the relevant work and work function to not include 'completion'. Signed-off-by:
-
Ofir Bitton authored
There are rare cases of failures when cards are initialized due to wrong values in efuse mappings that are parsed by firmware. To help debug those cases, print (in debug level) the raw binning masks as fetched from the firmware during device initialization. Signed-off-by:
-
Ofir Bitton authored
Current mapping between HMMU event and HMMU block is wrong. In addition the captured address in case of a page fault or an access error is scrambled, Hence we must call the descramble function. Signed-off-by:
-
Dafna Hirschfeld authored
1. Rename the func to hl_get_preboot_major_minor because we also set the extracted values in hdev fields. 2. Free the allocated string in the calling function which makes more sense Signed-off-by:
Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by:
-
Dani Liberman authored
The register which needs to be cleared is the valid register instead of the address. Signed-off-by:
-
Tal Cohen authored
Fix an issue in hard reset flow in which the driver didn't send a disable pci message if there was an active compute context. In hard reset, disable pci message should be sent no matter if a compute context exists or not. Signed-off-by:
-
Tal Cohen authored
The disable pci message is sent in reset device. It informs the FW not to raise more EQs. The Driver may ignore received EQs, when the device is in disabled mode. The duplication happens when hard reset is scheduled during compute reset and also performs 'escalate_reset_flow'. Signed-off-by:
-
Koby Elbaz authored
COMMS protocol is used for LKD <--> FW communication, and any communication failure between the two might turn out to be destructive, hence, it should be well emphasized. Signed-off-by:
-
Dafna Hirschfeld authored
since the function might fail and we should propagate the failure. Signed-off-by:
-
Tal Cohen authored
When the device is in disabled state, the driver isn't suppose to receive any events from FW. Printing the event type, as part of the message that was already printed, shall help to get more info if this unexpected message is received. Signed-off-by:
-
Koby Elbaz authored
Once a memory mapping is added to the page tables, it's followed by a TLB invalidation request which could potentially fail (HW failure). Removing the mapping is simply a part of this failure handling routine. TLB invalidation failure prints were updated to be more accurate. Signed-off-by:
-
Cai Huoqing authored
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by:Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by:
-
- 07 Apr, 2023 3 commits
-
-
Javier Martinez Canillas authored
The driver doesn't use simple-KMS helpers to set a simple display pipeline but only the drm_simple_encoder_init() function to initialize an encoder. That helper is just a wrapper of drm_encoder_init(), but passing a struct drm_encoder_funcs that sets the .destroy handler to drm_encoder_cleanup(). Since the <drm/drm_simple_kms_helper.h> header is only included for this helper and because the connector is initialized with drm_connector_init() as well, do the same for the encoder and drop the header include. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230406110235.3092055-3-javierm@redhat.com
-
Javier Martinez Canillas authored
This helper is just a wrapper that calls drm_connector_cleanup(), there's no need to have another level of indirection. Signed-off-by:
-
Dmitry Baryshkov authored
Drop the version comparison macros from dpu_hw_catalog.h, they are unused. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530889/ Link: https://lore.kernel.org/r/20230404130622.509628-43-dmitry.baryshkov@linaro.orgSigned-off-by:
-
