1. 15 May, 2018 11 commits
  2. 14 May, 2018 29 commits
    • Arjun Vynipadath's avatar
      cxgb4: do not fail vf instatiation in slave mode · 7cfac881
      Arjun Vynipadath authored
      We no longer require a check for cxgb4 to be MASTER
      when configuring SRIOV, It was required when we had
      module parameter to instantiate vf.
      Signed-off-by: default avatarArjun Vynipadath <arjun@chelsio.com>
      Signed-off-by: default avatarCasey Leedom <leedom@chelsio.com>
      Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7cfac881
    • Petr Machata's avatar
      mlxsw: spectrum_span: Support LAG under mirror-to-gretap · 55c0211d
      Petr Machata authored
      When resolving a path that the packet will take after being encapsulated
      in mirror-to-gretap scenarios, one of the devices en route could be a
      LAG. In that case, mirror to first up slave that corresponds to a front
      panel port.
      Signed-off-by: default avatarPetr Machata <petrm@mellanox.com>
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      55c0211d
    • Hernán Gonzalez's avatar
      net: ethernet: ti: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) · bde4c563
      Hernán Gonzalez authored
      Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)).
      
      drivers/net/ethernet/ti/cpts.c:567:9-16: WARNING: ERR_CAST can be used with cpts->refclk
      Generated by: scripts/coccinelle/api/err_cast.cocci
      Signed-off-by: default avatarHernán Gonzalez <hernan@vanguardiasur.com.ar>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bde4c563
    • Marcelo Ricardo Leitner's avatar
      sched: cls: enable verbose logging · 81c7288b
      Marcelo Ricardo Leitner authored
      Currently, when the rule is not to be exclusively executed by the
      hardware, extack is not passed along and offloading failures don't
      get logged. The idea was that hardware failures are okay because the
      rule will get executed in software then and this way it doesn't confuse
      unware users.
      
      But this is not helpful in case one needs to understand why a certain
      rule failed to get offloaded. Considering it may have been a temporary
      failure, like resources exceeded or so, reproducing it later and knowing
      that it is triggering the same reason may be challenging.
      
      The ultimate goal is to improve Open vSwitch debuggability when using
      flower offloading.
      
      This patch adds a new flag to enable verbose logging. With the flag set,
      extack will be passed to the driver, which will be able to log the
      error. As the operation itself probably won't fail (not because of this,
      at least), current iproute will already log it as a Warning.
      
      The flag is generic, so it can be reused later. No need to restrict it
      just for HW offloading. The command line will follow the syntax that
      tc-ebpf already uses, tc ... [ verbose ] ... , and extend its meaning.
      
      For example:
      # ./tc qdisc add dev p7p1 ingress
      # ./tc filter add dev p7p1 parent ffff: protocol ip prio 1 \
      	flower verbose \
      	src_mac ed:13:db:00:00:00 dst_mac 01:80:c2:00:00:d0 \
      	src_ip 56.0.0.0 dst_ip 55.0.0.0 action drop
      Warning: TC offload is disabled on net device.
      # echo $?
      0
      # ./tc filter add dev p7p1 parent ffff: protocol ip prio 1 \
      	flower \
      	src_mac ff:13:db:00:00:00 dst_mac 01:80:c2:00:00:d0 \
      	src_ip 56.0.0.0 dst_ip 55.0.0.0 action drop
      # echo $?
      0
      Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      81c7288b
    • David S. Miller's avatar
      Merge branch 'stmmac-dwmac-sun8i-Support-R40' · 4def4783
      David S. Miller authored
      Chen-Yu Tsai says:
      
      ====================
      net: stmmac: dwmac-sun8i: Support R40
      
      This is a resend of the patches for net-next split out from my R40
      Ethernet support v2 series, as requested by David Miller. The arm-soc
      bits will follow, once I rework the A64 system controller compatible.
      
      Patches 1, 2, and 3 clean up the dwmac-sun8i binding.
      
      Patch 4 adds device tree binding for Allwinner R40's Ethernet
      controller.
      
      Patch 5 converts regmap access of the syscon region in the dwmac-sun8i
      driver to regmap_field, in anticipation of different field widths on
      the R40.
      
      Patch 6 introduces custom plumbing in the dwmac-sun8i driver to fetch
      a regmap from another device, by looking up said device via a phandle,
      then getting the regmap associated with that device.
      
      Patch 7 adds support for different or absent TX/RX delay chain ranges
      to the dwmac-sun8i driver.
      
      Patch 8 adds support for the R40's ethernet controller.
      
      Excerpt from original cover letter:
      
      Changes since v1:
      
        - Default to fetching regmap from device pointed to by syscon phandle,
          and falling back to syscon API if that fails.
      
        - Dropped .syscon_from_dev field in device data as a result of the
          previous change.
      
        - Added a large comment block explaining the first change.
      
        - Simplified description of syscon property in sun8i-dwmac binding.
      
        - Regmap now only exposes the EMAC/GMAC register, but retains the
          offset within its address space.
      
        - Added patches for A64, which reuse the same sun8i-dwmac changes.
      
      This series adds support for the DWMAC based Ethernet controller found
      on the Allwinner R40 SoC. The controller is either a DWMAC clone or
      DWMAC core with its registers rearranged. This is already supported by
      the dwmac-sun8i driver. The glue layer control registers, unlike other
      sun8i family SoCs, is not in the system controller region, but in the
      clock control unit, like with the older A20 and A31 SoCs.
      
      While we reuse the bindings for dwmac-sun8i using a syscon phandle
      reference, we need some custom plumbing for the clock driver to export
      a regmap that only allows access to the GMAC register to the dwmac-sun8i
      driver. An alternative would be to allow drivers to register custom
      syscon devices with their own regmap and locking.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4def4783
    • Chen-Yu Tsai's avatar
      net: stmmac: dwmac-sun8i: Add support for GMAC on Allwinner R40 SoC · 9bf5085a
      Chen-Yu Tsai authored
      The Allwinner R40 SoC has the EMAC controller supported by dwmac-sun8i.
      It is named "GMAC", while EMAC refers to the 10/100 Mbps Ethernet
      controller supported by sun4i-emac. The controller is the same, but
      the R40 has the glue layer controls in the clock control unit (CCU),
      with a reduced RX delay chain, and no TX delay chain.
      
      This patch adds support for it using the framework laid out by previous
      patches to map the differences.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9bf5085a
    • Chen-Yu Tsai's avatar
      net: stmmac: dwmac-sun8i: Support different ranges for TX/RX delay chains · 7b270b72
      Chen-Yu Tsai authored
      On the R40 SoC, the RX delay chain only has a range of 0~7 (hundred
      picoseconds), instead of 0~31. Also the TX delay chain is completely
      absent.
      
      This patch adds support for different ranges by adding per-compatible
      maximum values in the variant data. A maximum of 0 indicates that the
      delay chain is not supported or absent.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7b270b72
    • Chen-Yu Tsai's avatar
      net: stmmac: dwmac-sun8i: Allow getting syscon regmap from external device · 49a06cae
      Chen-Yu Tsai authored
      On the Allwinner R40 SoC, the "GMAC clock" register is in the CCU
      address space. Using a standard syscon to access it provides no
      coordination with the CCU driver for register access. Neither does
      it prevent this and other drivers from accessing other, maybe critical,
      clock control registers. On other SoCs, the register is in the "system
      control" address space, which might also contain controls for mapping
      SRAM to devices or the CPU. This hardware has the same issues.
      
      Instead, for these types of setups, we let the device containing the
      control register create a regmap tied to it. We can then get the device
      from the existing syscon phandle, and retrieve the regmap with
      dev_get_regmap().
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49a06cae
    • Chen-Yu Tsai's avatar
      net: stmmac: dwmac-sun8i: Use regmap_field for syscon register access · 25ae15fb
      Chen-Yu Tsai authored
      On the Allwinner R40, the "GMAC clock" register is located in the CCU
      block, at a different register address than the other SoCs that have
      it in the "system control" block.
      
      This patch converts the use of regmap to regmap_field for mapping and
      accessing the syscon register, so we can have the register address in
      the variants data, and not in the actual register manipulation code.
      
      This patch only converts regmap_read() and regmap_write() calls to
      regmap_field_read() and regmap_field_write() calls. There are some
      places where it might make sense to switch to regmap_field_update_bits(),
      but this is not done here to keep the patch simple.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25ae15fb
    • Chen-Yu Tsai's avatar
      dt-bindings: net: dwmac-sun8i: Add binding for GMAC on Allwinner R40 SoC · eef8811d
      Chen-Yu Tsai authored
      The Allwinner R40 SoC has the EMAC controller supported by dwmac-sun8i.
      It is named "GMAC", while EMAC refers to the 10/100 Mbps Ethernet
      controller supported by sun4i-emac. The controller is the same, but
      the R40 has the glue layer controls in the clock control unit (CCU),
      with a reduced RX delay chain, and no TX delay chain.
      
      This patch adds the R40 specific bits to the dwmac-sun8i binding.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Reviewed-by: default avatarRob Herring <robh@kernel.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eef8811d
    • Chen-Yu Tsai's avatar
      dt-bindings: net: dwmac-sun8i: simplify description of syscon property · a6fe692e
      Chen-Yu Tsai authored
      The syscon property is used to point to the device that holds the glue
      layer control register known as the "EMAC (or GMAC) clock register".
      
      We do not need to explicitly list what compatible strings are needed, as
      this information is readily available in the user manuals. Also the
      "syscon" device type is more of an implementation detail. There are many
      ways to access a register not in a device's address range, the syscon
      interface being the most generic and unrestricted one.
      
      Simplify the description so that it says what it is supposed to
      describe.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Reviewed-by: default avatarRob Herring <robh@kernel.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a6fe692e
    • Chen-Yu Tsai's avatar
      dt-bindings: net: dwmac-sun8i: Sort syscon compatibles by alphabetical order · 9ed3fec3
      Chen-Yu Tsai authored
      The A83T syscon compatible was appended to the syscon compatibles list,
      instead of inserted in to preserve the ordering.
      
      Move it to the proper place to keep the list sorted.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Reviewed-by: default avatarRob Herring <robh@kernel.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9ed3fec3
    • Chen-Yu Tsai's avatar
      dt-bindings: net: dwmac-sun8i: Clean up clock delay chain descriptions · a4a78a97
      Chen-Yu Tsai authored
      The clock delay chains found in the glue layer for dwmac-sun8i are only
      used with RGMII PHYs. They are not intended for non-RGMII PHYs, such as
      MII external PHYs or the internal PHY. Also, a recent SoC has a smaller
      range of possible values for the delay chain.
      
      This patch reformats the delay chain section of the device tree binding
      to make it clear that the delay chains only apply to RGMII PHYs, and
      make it easier to add the R40-specific bits later.
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Reviewed-by: default avatarRob Herring <robh@kernel.org>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a4a78a97
    • David S. Miller's avatar
      Merge branch 'dsa-mv88e6xxx-remove-Global-1-setup' · 62150dfe
      David S. Miller authored
      Vivien Didelot says:
      
      ====================
      net: dsa: mv88e6xxx: remove Global 1 setup
      
      The mv88e6xxx driver is still writing arbitrary registers at setup time,
      e.g. priority override bits. Add ops for them and provide specific setup
      functions for priority and stats before getting rid of the erroneous
      mv88e6xxx_g1_setup code, as previously done with Global 2.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      62150dfe
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: add a stats setup function · 447b1bb8
      Vivien Didelot authored
      Now that the Global 1 specific setup function only setup the statistics
      unit, kill it in favor of a mv88e6xxx_stats_setup function.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      447b1bb8
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: add IEEE and IP mapping ops · 93e18d61
      Vivien Didelot authored
      All Marvell switch families except 88E6390 have direct registers in
      Global 1 for IEEE and IP priorities override mapping. The 88E6390 uses
      indirect tables instead.
      
      Add .ieee_pri_map and .ip_pri_map ops to distinct that and call them
      from a mv88e6xxx_pri_setup helper. Only non-6390 are concerned ATM.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93e18d61
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: use helper for 6390 histogram · 408d2deb
      Vivien Didelot authored
      The Marvell 88E6390 model has its histogram mode bits moved in the
      Global 1 Control 2 register. Use the previously introduced
      mv88e6xxx_g1_ctl2_mask helper to set them.
      
      At the same time complete the documentation of the said register.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      408d2deb
    • David S. Miller's avatar
      Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · 23548dab
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      40GbE Intel Wired LAN Driver Updates 2018-05-14
      
      This series contains updates to virtchnl, i40e and i40evf.
      
      Bruce cleans up whitespace and unnecessary parentheses in virtchnl.
      
      Jake does a number of stat cleanups in the i40e driver, including
      cleanup of code indentation, whitespace issues, remove duplicate stats,
      fix grammar in code comment and general spring cleaning of the
      statistics code.
      
      Patryk fixes an issue where we recalculate vectors left and vectors
      wanted but do not take into account the reduced number of queue pairs
      per VSI.
      
      Harshitha adds tx_busy stat to ethtool stats to track the number of
      times we return NETDEV_TX_BUSY to the stack during transmit.
      
      Paweł fixes a potential system crash when unloading the VF driver after
      a hardware reset.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      23548dab
    • David S. Miller's avatar
      Merge branch 'kernel-add-support-to-collect-hardware-logs-in-crash-recovery-kernel' · 42b956fd
      David S. Miller authored
      Rahul Lakkireddy says:
      
      ====================
      kernel: add support to collect hardware logs in crash recovery kernel
      
      On production servers running variety of workloads over time, kernel
      panic can happen sporadically after days or even months. It is
      important to collect as much debug logs as possible to root cause
      and fix the problem, that may not be easy to reproduce. Snapshot of
      underlying hardware/firmware state (like register dump, firmware
      logs, adapter memory, etc.), at the time of kernel panic will be very
      helpful while debugging the culprit device driver.
      
      This series of patches add new generic framework that enable device
      drivers to collect device specific snapshot of the hardware/firmware
      state of the underlying device in the crash recovery kernel. In crash
      recovery kernel, the collected logs are added as elf notes to
      /proc/vmcore, which is copied by user space scripts for post-analysis.
      
      The sequence of actions done by device drivers to append their device
      specific hardware/firmware logs to /proc/vmcore are as follows:
      
      1. During probe (before hardware is initialized), device drivers
      register to the vmcore module (via vmcore_add_device_dump()), with
      callback function, along with buffer size and log name needed for
      firmware/hardware log collection.
      
      2. vmcore module allocates the buffer with requested size. It adds
      an elf note and invokes the device driver's registered callback
      function.
      
      3. Device driver collects all hardware/firmware logs into the buffer
      and returns control back to vmcore module.
      
      The device specific hardware/firmware logs can be seen as elf notes
      with note type 0x700, as shown below:
      
      Displaying notes found at file offset 0x00001000 with length 0x040032c0:
        Owner                 Data size	Description
        LINUX                0x02000fec	Unknown note type: (0x00000700)
        LINUX                0x02000fec	Unknown note type: (0x00000700)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
        VMCOREINFO           0x00000785	Unknown note type: (0x00000000)
      
      Patch 1 adds API to vmcore module to allow drivers to register callback
      to collect the device specific hardware/firmware logs.  The logs will
      be added to /proc/vmcore as elf notes.
      
      Patch 2 updates read and mmap logic to append device specific hardware/
      firmware logs as elf notes.
      
      Patch 3 shows a cxgb4 driver example using the API to collect
      hardware/firmware logs in crash recovery kernel, before hardware is
      initialized.
      
      Thanks,
      Rahul
      
      ---
      v8:
      - Added missing linux/types.h header include.
      - Removed __vmcore_add_device_dump().
      
      v7:
      - Removed "CHELSIO" vendor identifier in Elf Note name. Instead,
        writing "LINUX".
      - Moved vmcoredd_header to new file include/uapi/linux/vmcore.h
      - Reworked vmcoredd_header to include Elf Note as part of the header
        itself.
      - Removed vmcoredd_get_note_size().
      - Renamed vmcoredd_write_note() to vmcoredd_write_header().
      - Replaced all "unsigned long" with "unsigned int" for device dump
        size since max size of Elf Word is u32.
      
      v6:
      - Reworked device dump elf note name to contain vendor identifier.
      - Added vmcoredd_header that precedes actual dump in the Elf Note.
      - Device dump's name is moved inside vmcoredd_header.
      - Added "CHELSIO" string as vendor identifier in the Elf Note name
        for cxgb4 device dumps.
      
      v5:
      - Removed enabling CONFIG_PROC_VMCORE_DEVICE_DUMP by default and
        updated help message.
      
      v4:
      - Made __vmcore_add_device_dump() static.
      - Moved compile check to define vmcore_add_device_dump() to
        crash_dump.h to fix compilation when vmcore.c is not compiled in.
      - Convert ---help--- to help in Kconfig as indicated by checkpatch.
      - Rebased to tip.
      
      v3:
      - Dropped sysfs crashdd module.
      - Exported dumps as elf notes. Suggested by Eric Biederman
        <ebiederm@xmission.com>.  Added as patch 2 in this version.
      - Added CONFIG_PROC_VMCORE_DEVICE_DUMP to allow configuring device
        dump support.
      - Moved logic related to adding dumps from crashdd to vmcore module.
      - Rename all crashdd* to vmcoredd*.
      - Updated comments.
      
      v2:
      - Added ABI Documentation for crashdd.
      - Directly use octal permission instead of macro.
      
      Changes since rfc v2:
      - Moved exporting crashdd from procfs to sysfs. Suggested by
        Stephen Hemminger <stephen@networkplumber.org>
      - Moved code from fs/proc/crashdd.c to fs/crashdd/ directory.
      - Replaced all proc API with sysfs API and updated comments.
      - Calling driver callback before creating the binary file under
        crashdd sysfs.
      - Changed binary dump file permission from S_IRUSR to S_IRUGO.
      - Changed module name from CRASH_DRIVER_DUMP to CRASH_DEVICE_DUMP.
      
      rfc v2:
      - Collecting logs in 2nd kernel instead of during kernel panic.
        Suggested by Eric Biederman <ebiederm@xmission.com>.
      - Added new crashdd module that exports /proc/crashdd/ containing
        driver's registered hardware/firmware logs in patch 1.
      - Replaced the API to allow drivers to register their hardware/firmware
        log collect routine in crash recovery kernel in patch 1.
      - Updated patch 2 to use the new API in patch 1.
      ====================
      Acked-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42b956fd
    • Rahul Lakkireddy's avatar
      cxgb4: collect hardware dump in second kernel · 1dde532d
      Rahul Lakkireddy authored
      Register callback to collect hardware/firmware dumps in second kernel
      before hardware/firmware is initialized. The dumps for each device
      will be available as elf notes in /proc/vmcore in second kernel.
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1dde532d
    • Rahul Lakkireddy's avatar
      vmcore: append device dumps to vmcore as elf notes · 7efe48df
      Rahul Lakkireddy authored
      Update read and mmap logic to append device dumps as additional notes
      before the other elf notes. We add device dumps before other elf notes
      because the other elf notes may not fill the elf notes buffer
      completely and we will end up with zero-filled data between the elf
      notes and the device dumps. Tools will then try to decode this
      zero-filled data as valid notes and we don't want that. Hence, adding
      device dumps before the other elf notes ensure that zero-filled data
      can be avoided. This also ensures that the device dumps and the
      other elf notes can be properly mmaped at page aligned address.
      
      Incorporate device dump size into the total vmcore size. Also update
      offsets for other program headers after the device dumps are added.
      
      Suggested-by: Eric Biederman <ebiederm@xmission.com>.
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7efe48df
    • Rahul Lakkireddy's avatar
      vmcore: add API to collect hardware dump in second kernel · 2724273e
      Rahul Lakkireddy authored
      The sequence of actions done by device drivers to append their device
      specific hardware/firmware logs to /proc/vmcore are as follows:
      
      1. During probe (before hardware is initialized), device drivers
      register to the vmcore module (via vmcore_add_device_dump()), with
      callback function, along with buffer size and log name needed for
      firmware/hardware log collection.
      
      2. vmcore module allocates the buffer with requested size. It adds
      an Elf note and invokes the device driver's registered callback
      function.
      
      3. Device driver collects all hardware/firmware logs into the buffer
      and returns control back to vmcore module.
      
      Ensure that the device dump buffer size is always aligned to page size
      so that it can be mmaped.
      
      Also, rename alloc_elfnotes_buf() to vmcore_alloc_buf() to make it more
      generic and reserve NT_VMCOREDD note type to indicate vmcore device
      dump.
      
      Suggested-by: Eric Biederman <ebiederm@xmission.com>.
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2724273e
    • Paweł Jabłoński's avatar
      i40evf: Fix a hardware reset support in VF driver · 27392e57
      Paweł Jabłoński authored
      This patch fixes a hardware reset support in VF driver.
      It is needed because when a hardware reset is detected
      adapter->state is in __I40EVF_RESETTING state before
      i40evf_reset_task is called. Without this patch
      unloading VF driver after a hardware reset ends
      with a system crash.
      Signed-off-by: default avatarPaweł Jabłoński <pawel.jablonski@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      27392e57
    • Jacob Keller's avatar
      i40e: free the skb after clearing the bitlock · c79756cb
      Jacob Keller authored
      In commit bbc4e7d2 ("i40e: fix race condition with PTP_TX_IN_PROGRESS
      bits") we modified the code which handles Tx timestamps so that we would
      clear the progress bit as soon as possible.
      
      A later commit 0bc0706b ("i40e: check for Tx timestamp timeouts during
      watchdog") introduced similar code for detecting and handling cleanup of
      a blocked Tx timestamp. This code did not use the same pattern for cleaning
      up the skb.
      
      Update this code to wait to free the skb until after the bit lock is
      free, by first setting the ptp_tx_skb to NULL and clearing the lock.
      Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      c79756cb
    • Jacob Keller's avatar
      i40e: cleanup wording in a header comment · 9c0c3b83
      Jacob Keller authored
      Fix up the English in the header comment for i40e_ptp_tx_hang.
      Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      9c0c3b83
    • Jacob Keller's avatar
      i40evf: remove MAX_QUEUES and just use I40EVF_MAX_REQ_QUEUES · aa4a0654
      Jacob Keller authored
      We don't really need to have separate definitions for MAX_QUEUES and
      I40EVF_MAX_REQ_QUEUES, since we'll always be limited by how many queues
      we request anyways. If we haven't enabled requesting the maximum number
      of queues, there's no reason to have our call to alloc_etherdev_mq
      actually pass the higher value, since we'd never enable those queues
      anyways.
      Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      aa4a0654
    • Harshitha Ramamurthy's avatar
      i40e: add tx_busy to ethtool stats · 3f76d01f
      Harshitha Ramamurthy authored
      This patch adds the tx_busy stat to the ethtool stats. The tx_busy
      stat tracks the number of times we return NETDEV_TX_BUSY to the stack
      during transmit.
      Signed-off-by: default avatarHarshitha Ramamurthy <harshitha.ramamurthy@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      3f76d01f
    • Patryk Małek's avatar
      i40e: Fix recalculation of MSI-X vectors for VMDq · ca12c9d4
      Patryk Małek authored
      This patch adds a recalculation of number of MSI-X
      vectors for VMDq in the case where we have less
      vectors available than we would want to reserve for
      VMDq.
      
      It fixes the issue where we recalculate vectors left
      and vectors wanted but we didn't take into account
      the reduced number of queue pairs per VSI.
      Signed-off-by: default avatarPatryk Małek <patryk.malek@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      ca12c9d4
    • Jacob Keller's avatar
      i40e: cleanup whitespace for some ethtool stat definitions · 132ee00e
      Jacob Keller authored
      A future patch is going to refactor some of the ethtool statistic code.
      To keep the patches easy to review, cleanup some of the indentation used
      for macro definitions first.
      Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      132ee00e