- 26 Feb, 2010 40 commits
-
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
There is only one page to load (page 3 for pac7302 and page 4 for pac7311). Signed-off-by:
-
Hans de Goede authored
The sensors adcm2700, mc501cb and ov7620 cannot have the full height permitted by the zc3xx bridges. This change removes 8 pixels at the bottom of the images. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/media/dvb/mantis/mantis_hif.c drivers/media/dvb/mantis/mantis_pci.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Márton Németh authored
'extern' is not needed at function definition. This will remove the following sparse warning (see "make C=1"): * function 'dib0090_dcc_freq' with external linkage has definition Signed-off-by:
Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Márton Németh authored
The 3rd parameter v4l2_subdev_notify() is passed to the notify() callback which is a pointer, see <media/v4l2-subdev.h> and <media/v4l2-device.h>. This will remove the following sparse warning (see "make C=1"): * Using plain integer as NULL pointer Signed-off-by:
-
Márton Németh authored
Some functions are only used locally so mark them static. This will remove the following sparse warnings (see "make C=1"): * symbol 'extract_mask_pos' was not declared. Should it be static? * symbol 'stv0900_initialize' was not declared. Should it be static? * symbol 'stv0900_get_mclk_freq' was not declared. Should it be static? * symbol 'stv0900_set_mclk' was not declared. Should it be static? * symbol 'stv0900_get_err_count' was not declared. Should it be static? Signed-off-by:
-
Márton Németh authored
The functions stv0900_sw_algo() and stv0900_set_dvbs1_track_car_loop() are only used locally so mark them static. This will remove the following sparse warnings (see "make C=1"): * symbol 'stv0900_sw_algo' was not declared. Should it be static? * symbol 'stv0900_set_dvbs1_track_car_loop' was not declared. Should it be static? Signed-off-by:
-
Márton Németh authored
Remove the following sparse error (see "make C=1"): * error: incompatible types for operation (<) left side has type struct dvb_frontend * right side has type int Signed-off-by: -
Thiago Farina authored
drivers/media/dvb/dvb-core/dvb_frontend.c | 6 ++---- Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Signed-off-by:
-
Márton Németh authored
Remove the following sparse warning (see "make C=1"): * warning: Using plain integer as NULL pointer Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Muralidharan Karicheri authored
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by:
Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by:
Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Muralidharan Karicheri authored
1) clocks are configured using generic clock names 2) converting the driver to a platform driver 3) cleanup - consolidate all static variables inside a structure, ccdc_cfg The ccdc driver now uses generic names for clocks - master and slave. On individual platforms these clocks will inherit from the platform specific clock. This will allow re-use of the driver for the same IP across different SoCs. Reviewed-by:
-
Muralidharan Karicheri authored
1) clocks are configured using generic clock names; 2) converts the driver to a platform driver; 3) cleanup - consolidate all static variables inside a structure, ccdc_cfg; The ccdc now uses a generic name for clocks. "master" and "slave". On individual platforms these clocks will inherit from the platform specific clock. This will allow re-use of the driver for the same IP across different SoCs. Updated based on Kevin's comments on clock configuration and error code (v3, v4). Reviewed-by:
-
Muralidharan Karicheri authored
1) removed the platform code and clk configuration. They are now part of ccdc driver (part of the ccdc patches and platform patches 2-4); 2) Added proper error codes for ccdc register function. Reviewed-by:
-
Pete Eberlein authored
The kernel i2c model uses right-aligned 7-bit i2c addresses, but the 2250 firmware uses an 8-bit address in the usb vendor request. A previous patch by Jean Delvare shifted the i2c addresses 1 bit to the right, and this patch fixes the write_reg function to shift it back before sending the vendor request. To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
-
Devin Heitmueller authored
Clarify the rates available for the device, and move the freeing of the buffer to the free routine instead of the close (per Takashi's suggestion). Thanks to Takashi Iwai for reviewing and providing feedback. This work was sponsored by ONELAN Limited. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Eliminate the possibility of passing NULL to snd_card_free(). Thanks to Takashi Iwai for reviewing and pointing this out. This work was sponsored by ONELAN Limited. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Devin Heitmueller authored
Move the cx18_alsa_announce_pcm_data() function further up in the file, since apparently "make checkpatch" has never heard of a forward declaration. Note that despite the hg diff showing everything else as having been deleted/added, in reality it was only that one function that got moved (and the forward declaration was removed from the top of the file). This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Remove some dead code and make a PCM specific module debug parameter to avoid an extern reference. Signed-off-by:
-
Devin Heitmueller authored
Codingstyle fixes, some introduced as a result of the ALSA work, some pre-existing. This patch is a whitespace change only. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Fix codingstyle issues, and make the minimum version for cx18-alsa required to be 2.6.17, so that we don't need all the #ifdefs related to the changes to ALSA structures. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Address coding style issue with cx18-alsa-main.c This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
If the stream is already in use, make sure we free up the memory allocated earlier. Thanks to Andy Wall for reviewing and pointing this out. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Remove a couple of warnings from dead code during driver development. Signed-off-by:
-
Devin Heitmueller authored
Use the cx18 board name in the ALSA description, to make it easier for users who run "arecord -l" to see which device they should be looking for. Also, use strlcpy() instead of strcpy(). Signed-off-by:
-
Devin Heitmueller authored
Fix the debug macro so that it is dependent on the modprobe parameter. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Restructure the way the module gets loaded so that it gets loaded automatically when cx18 is loaded, and make it work properly if there are multiple cards present (since the old code would only take one opportunity to connect to cx18 instances when the module first loaded). This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Remove an unneeded debug line, which was preventing the cx18-alsa module from loading. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Export a couple of more symbols required by the cx18-alsa module. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Add cx18-alsa to the Makefile and Kconfig This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Add code so that the PCM ALSA device actually works, and update the cx18-streams mechanism so that it passes the data off to the cx18-alsa module. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Expose a couple of symbols in the cx18 module so that locking of the PCM stream can be shared with the cx18-alsa module. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Fix some basic compilation issues with Andy's original code. In particular, temporarily #ifdef out the mixer code, add some additional exception handling, fix a couple of typos, and add a copyright line. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Rename cx18-alsa.c to cx18-alsa-main.c so that we can call the final .ko file cx18-alsa.ko Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
