This is part 2 of the Rx refactor series, just including
changes to i40evf.

This refactor aligns the receive routine with the one in
ixgbe which was highly optimized.  This reduces the code
we have to maintain and allows for (hopefully) more readable
and maintainable RX hot path.

In order to do this:
- consolidate the receive path into a single function that doesn't
  use packet split but *does* use pages for Rx buffers.
- remove the old _1buf routine
- consolidate several routines into helper functions
- remove VF ethtool control over packet split
- remove priv_flags interface since it is unused
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As part of preparation for the rx-refactor, remove the
packet split receive routine and ancillary code.

Some of the split related context set up code stays in
i40e_virtchnl_pf.c in case an older VF driver tries to load
and still wants to use packet split.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This is part 1 of the Rx refactor series, just including
changes to i40e.

This refactor aligns the receive routine with the one in
ixgbe which was highly optimized.  This reduces the code
we have to maintain and allows for (hopefully) more readable
and maintainable RX hot path.

In order to do this:
- consolidate the receive path into a single function that doesn't
  use packet split but *does* use pages for Rx buffers.
- remove the old _1buf routine
- consolidate several routines into helper functions
- remove ethtool control over packet split

Change-ID: I5ca100721de65992aa0114f8b4bac844b84758e0
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As part of the rx-refactor, the dtype variable in the i40e_ring
struct is no longer used, so remove it.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As part of preparation for the rx-refactor, remove the
packet split receive routine and ancillary code.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Refactor the interpretation of a tunnel.  This removes
some code and lets us start using the hardware's parsing.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

With the recent "retirements" and other changes, make the maintainers
list a lot less confusing and a bit more straight forward.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Shannon Nelson <sln@onemain.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

percpu_counter only have protection against preemption.

TCP stack uses them possibly from BH, so we need BH protection
in contexts that could be run in process context

Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-05-04

This series contains updates to ixgbe, ixgbevf and traffic class helpers.

Sridhar adds helper functions to the tc_mirred header to access tcf_mirred
information and then implements them for ixgbe to enable redirection to
a SRIOV VF or an offloaded MACVLAN device queue via tc 'mirred' action.

Amritha adds support to set filters with multiple header fields (L3,L4)
to match on.

KY Srinivasan from Microsoft add Hyper-V support into ixgbevf.

Emil adds 82599 sub-device IDs that were missing from the list of parts
that support WoL.  Then simplified the logic we use to determine WoL
support by reading the EEPROM bits for MACs X540 and newer.

Preethi cleaned up duplicate and unused device IDs.  Fixed our ethtool
stat reporting where we were ignoring higher 32 bits of stats registers,
so fill out 64 bit stat values into two 32 bit words.

Babu Moger from Oracle improves VF performance issues on SPARC.

Alex Duyck cleans up some of the Hyper-V implementation from KY so that
we can just use function pointers instead of having to identify if a
given VF is running on a Linux or Windows PF.

Usha makes sure that DCB and FCoE is disabled for X550EM_x/a MACs and
cleans up the DCB initialization in the process.

Tony cleans up the API for ixgbevf_update_xcast_mode() so we do not
have to pass in the netdev parameter, since it was never used in the
function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

kbuild test robot reported a build failure on s390.
While at it, also fix missing conversion in the tilera driver.

Fixes: 9b36627a ("net: remove dev->trans_start")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers that use LLTX need to update trans_start of the netdev_queue.
(Most drivers don't use LLTX; stack does this update if .ndo_start_xmit
 returned TX_OK).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the call to fn() fails then "buf" is uninitialized.  Just return the
error code in that case.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the fn() calls fail then "buf" is uninitialized.  Just return early
in that situation.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__inet_twsk_hashdance() might be called from process context,
better block BH before acquiring bind hash and established locks

Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_snd_una_update() and tcp_rcv_nxt_update() call
u64_stats_update_begin() either from process context or BH handler.

This triggers a lockdep splat on 32bit & SMP builds.

We could add u64_stats_update_begin_bh() variant but this would
slow down 32bit builds with useless local_disable_bh() and
local_enable_bh() pairs, since we own the socket lock at this point.

I add sock_owned_by_me() helper to have proper lockdep support
even on 64bit builds, and new u64_stats_update_begin_raw()
and u64_stats_update_end_raw methods.

Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible")
Reported-by: Fabio Estevam <festevam@gmail.com>
Diagnosed-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
pull request: batman-adv 20160504

In this pull request you have:
- two changes to the MAINTAINERS file where one marks our mailing list
  as moderated and the other adds a missing documentation file
- kernel-doc fixes
- code refactoring and various cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

I've finally noticed that mdiobus_scan() also returns either NULL or error
value on failure.  Return ERR_PTR(-ENODEV) instead of NULL since this is
the  error value  already filtered out by the callers that want to ignore
the  MDIO address scan failure...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
net: remove trans_start from struct net_device

We currently have two instances for trans_start, once in
net_device and once in netdev_queue.

This series removes trans_start from net_device.
Updates to dev->trans_start are replaced with updates to netdev queue 0.

This series is compile-tested only.
Replacement is done in 3 steps:

1. Replace read-accesses:
  x = dev->trans_start

  gets replaced by
  x = dev_trans_start(dev)

2. Replace write accesses:
  dev->trans_start = jiffies;

  gets replaced with new helper:
  netif_trans_update(dev);

3. This helper is then changed to set
   netdev_get_tx_queue(dev, 0)->trans_start
   instead of dev->trans_start.

After this dev->trans_start can be removed.

It should be noted that after this series several instances
of netif_trans_update() are useless (if they occur in
.ndo_start_xmit and driver doesn't set LLTX flag -- stack already
did an update).

Comments welcome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

previous patches removed all direct accesses to dev->trans_start,
so change the netif_trans_update helper to update trans_start of
netdev queue 0 instead and then remove trans_start from struct net_device.

AFAICS a lot of the netif_trans_update() invocations are now useless
because they occur in ndo_start_xmit and driver doesn't set LLTX
(i.e. stack already took care of the update).

As I can't test any of them it seems better to just leave them alone.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

trans_start exists twice:
- as member of net_device (legacy)
- as member of netdev_queue

In order to get rid of the legacy case, add a helper for the
dev->trans_update (this patch), then convert spots that do

dev->trans_start = jiffies

to use this helper (next patch).

This would then allow us to change the helper so that it updates the
trans_stamp of netdev queue 0 instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

a trans_start struct member exists twice:
- in struct net_device (legacy)
- in struct netdev_queue

Instead of open-coding dev->trans_start usage to obtain the current
trans_start value, use dev_trans_start() instead.

This is not exactly the same, as dev_trans_start also considers
the trans_start values of the netdev queues owned by the device
and provides the most recent one.

For legacy devices this doesn't matter as dev_trans_start can cope
with netdev trans_start values of 0 (they are ignored).

This is a prerequisite to eventual removal of dev->trans_start.

Cc: linux-rdma@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

use net_device directly. Compile tested, objdiff shows no changes.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ipv6 gre implementation was cleaned up to share more code
with the ipv4 version, but it can be enabled even when NET_IPGRE_DEMUX
is disabled, resulting in a link error:

net/built-in.o: In function `gre_rcv':
:(.text+0x17f5d0): undefined reference to `gre_parse_header'
ERROR: "gre_parse_header" [net/ipv6/ip6_gre.ko] undefined!

This adds a Kconfig dependency to prevent that now invalid
configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
gre: receive also TEB packets for lwtunnels

NOTE: this patchset needs net merged to net-next.

This allows lwtunnel users to get also packets with ETH_P_TEB protocol
specified in GRE header through an ipgre interface. There's really nothing
special about these packets in the case of lwtunnels - it's just an inner
protocol like any other. The only complications stem from keeping
compatibility with other uses of GRE.

This will be used by openvswitch to support eth_push and eth_pop actions.
I'd also like to see tc support for lwtunnels (this feature included) in the
future.

The first patch is not directly related and can be submitted standalone if
needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For ipgre interfaces in collect metadata mode, receive also traffic with
encapsulated Ethernet headers. The lwtunnel users are supposed to sort this
out correctly. This allows to have mixed Ethernet + L3-only traffic on the
same lwtunnel interface. This is the same way as VXLAN-GPE behaves.

To keep backwards compatibility and prevent any surprises, gretap interfaces
have priority in receiving packets with Ethernet headers.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will allow to make the pull dependent on the tunnel type.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The call to gre_parse_header is either followed by iptunnel_pull_header, or
in the case of ICMP error path, the actual header is not accessed at all.

In the first case, iptunnel_pull_header will call pskb_may_pull anyway and
it's pointless to do it twice. The only difference is what call will fail
with what error code but the net effect is still the same in all call sites.

In the second case, pskb_may_pull is pointless, as skb->data is at the outer
IP header and not at the GRE header.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G ethernet SRIOV Upgrades

This series introduces new features and upgrades for mlx5 etherenet SRIOV,
while the first patch provides a bug fixes for a compilation issue introduced
buy the previous aRFS series for when CONFIG_RFS_ACCEL=y and CONFIG_MLX5_CORE_EN=n.

Changes from V0:
    - 1st patch: Don't add a new Kconfig flag.  Instead, compile out en_arfs.c \
contents when CONFIG_RFS_ACCEL=n

SRIOV upgrades:
    - Use synchronize_irq instead of the vport events spin_lock
    - Fix memory leak in error flow
    - Added full VST support
    - Spoofcheck support
    - Trusted VF promiscuous and allmulti support

VST and Spoofcheck in details:
    - Adding Low level firmware commands support for creating ACLs
     (Access Control Lists) Flow tables.  ACLs are regular flow tables with
     the only exception that they are bound to a specific e-Switch vport (VF)
     and they can be one of two types
        > egress ACL: filters traffic going from e-Switch to VF.
        > ingress ACL: filters traffic going from VF to e-Switch.
    - Ingress/Egress ACLs (per vport) for VF VST mode filtering.
    - Ingress/Egress ACLs (per vport) for VF spoofcheck filtering.
    - Ingress/Egress ACLs (per vport) configuration:
        > Created only when at least one of (VST, spoofcheck) is configured.
	> if (!spoofchk && !vst) allow all traffic.  i.e. no ACLs.
        > if (spoofchk && vst) allow only untagged traffic with smac=original mac \
                sent from the VF.
        > if (spoofchk && !vst) allow only traffic with smac=original mac sent from \
the VF.  > if (!spoofchk && vst) allow only untagged traffic.

Trusted VF promiscuous and allmulti support in details:
    - Added two flow groups for allmulti and promisc VFs to the e-Switch FDB table
        > Allmulti group: One rule that forwards any mcast traffic coming from
                          either uplink or VFs/PF vports.
        > Promisc group: One rule that forwards all unmatched traffic coming from \
                uplink.
    - Add vport context change event handling for promisc and allmulti
      If VF is trusted respect the request and:
        > if allmulti request: add the vport to the allmulti group.
          and to all other L2 mcast address in the FDB table.
        > if promisc request: add the vport to the promisc group.
        > Note: A promisc VF can only see traffic that was not explicitly matched to
                or requested by any other VF.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

- Add support to configure trusted vf attribute through trust_vf_ndo.

- Upon VF trust setting change we update vport context to refresh
 allmulti/promisc or any trusted vf attributes that we didn't trust the
 VF for before.

- Lock the eswitch state lock on vport event in order to synchronise the
 vport context updates , this will prevent contention with vport trust
 setting change which will trigger vport mac list update.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add promisc_change as a trigger to vport context change event.
Add set vport promisc/allmulti functions to add vport to promiscuous
flowtable rules.
Upon promisc/allmulti rx mode vf request add the vport to
the relevant promiscuous group (Allmulti/Promisc group) so the relevant
traffic will be forwarded to it.
Upon allmulti vf request add the vport to each existing multicast fdb
rule.
Upon adding/removing mcast address from a vport, update all other
allmulti vports.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add promiscuous and allmulti steering groups in FDB table.
Besides the full match L2 steering rules group, we added
two more groups to catch the "miss" rules traffic:
* Allmulti group: One rule that forwards any mcast traffic coming from
either uplink or VFs/PF vports
* Promisc group: One rule that forwards all unmatched traffic coming
from uplink.

Needed for downstream privileged VF promisc and allmulti support.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the usage of explicit cleanup function and use existing vport
change handler. Calling vport change handler while vport
is disabled will cleanup the vport resources.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable ingress/egress ACL tables only when we need to configure ACL
rules.
Disable ingress/egress ACL tables once all ACL rules are removed.

All VF outgoing/incoming traffic need to go through the ingress/egress ACL
tables.
Adding/Removing these tables on demand will save unnecessary hops in the
flow steering when the ACL tables are empty.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Configure ingress and egress vport ACL rules according to spoofchk
admin parameters.

Ingress ACL flow table rules:
if (!spoofchk && !vst) allow all traffic.
else :
1) one of the following rules :
* if (spoofchk && vst) allow only untagged traffic with smac=original
mac sent from the VF.
* if (spoofchk && !vst) allow only traffic with smac=original mac sent
from the VF.
* if (!spoofchk && vst) allow only untagged traffic.
2) drop all traffic that didn't hit #1.

Add support for set vf spoofchk ndo.

Add non zero mac validation in case of spoofchk to set mac ndo:
when setting new mac we need to validate that the new mac is
not zero while the spoofchk is on because it is illegal
combination.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Configure ingress and egress vport ACL rules according to
vlan and qos admin parameters.

Ingress ACL flow table rules:
1) drop any tagged packet sent from the VF
2) allow other traffic (default behavior)

Egress ACL flow table rules:
1) allow only tagged traffic with vlan_tag=vst_vid.
2) drop other traffic.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create egress/ingress ACLs per VF vport at vport enable.

Ingress ACL:
	- one flow group to drop all tagged traffic in VST mode.

Egress ACL:
	- one flow group that allows only untagged traffic with
          smac that is equals to the original mac (anti-spoofing).
        - one flow group that allows only untagged traffic.
        - one flow group that allows only  smac that is equals
          to the original mac (anti-spoofing).
        (note: only one of the above group has active rule)
	- star rule will be used to drop all other traffic.

By default no rules are generated, unless VST is explicitly requested.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix memory leak in case query nic vport command failed.

Fixes: 81848731 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vport spin lock can be replaced with synchronize_irq() in the right
place, this will remove the need of locking inside irq context.
Locking in esw_enable_vport is not required since vport events are yet
to be enabled, and at esw_disable_vport it is sufficient to
synchronize_irq() to guarantee no further vport events handlers will be
scheduled.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the relevant flow steering device structs and commands to
support vport.
Update the flow steering core API to receive vport number.
Add ingress and egress ACL flow table name spaces.
Add ACL flow table support:
* ACL (Access Control List) flow table is a table that contains
only allow/drop steering rules.

* We have two types of ACL flow tables - ingress and egress.

* ACLs handle traffic sent from/to E-Switch FDB table, Ingress refers to
traffic sent from Vport to E-Switch and Egress refers to traffic sent
from E-Switch to vport.

* Ingress ACL flow table allow/drop rules is checked against traffic
sent from VF.

* Egress ACL flow table allow/drop rules is checked against traffic sent
to VF.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>