- 28 Feb, 2011 21 commits
-
-
Tomas Winkler authored
Add the first level indentation to easycap_testcard.c with astyle -t8. No chackpatch warnings were created Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tomas Winkler authored
Add first level indentation to easycap_sound_oss.c with astyle -t8 62 lines over 80 characters were left out for further fix Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Tomas Winkler authored
Add the first level indentation to easycap_sound.c with astyle -t8. 41 lines over 80 characters were left out for further fix Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Tomas Winkler authored
Add first level indentation to easayca_main.c This created around 300 lines over 80 characters. Around 100 of straight forward once were fixed in this patch. The another 200 require more code movement and need to be fixed later Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Aaro Koskinen authored
The parameter is not used by the driver. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
The files contain nothing actually needed by the driver. Signed-off-by:
-
Aaro Koskinen authored
The value is always false, so the field can be eliminated. Signed-off-by:
-
Aaro Koskinen authored
fbcon_XGI_fillrect() implementation is trivial and can be replaced with cfb_fillrect(). Signed-off-by:
-
Aaro Koskinen authored
fbcon_XGI_copyarea() implementation is trivial and can be replaced with cfb_copyarea(). Signed-off-by:
-
Michael Hennerich authored
Add timestamp attributes. Revise timestamp handling accordingly. Preset timestamp generation. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Michael Hennerich authored
Add timestamp attributes. Revise timestamp handling accordingly. Preset timestamp generation. Signed-off-by:
-
Michael Hennerich authored
Add timestamp attributes. Revise timestamp handling accordingly. Preset timestamp generation. Signed-off-by:
-
Michael Hennerich authored
Add timestamp attributes. Revise timestamp handling accordingly. Preset timestamp generation. Signed-off-by:
-
Michael Hennerich authored
Variable sizeint is used uninitialized. Remove sizeint completely and use bits_used instead. Signed-off-by:
-
Michael Hennerich authored
The first part of build_channel_array()identifies the number of enabled channels. Further down this count is used to allocate the ci_array. The next section parses the scan_elements directory again, and fills ci_array regardless if the channel is enabled or not. So if less than available channels are enabled ci_array memory is overflowed. This fix makes sure that we allocate enough memory. But the whole approach looks a bit cumbersome to me. Why not allocate memory for MAX_CHANNLES, less say 64 (I never seen a part with more than that channels). And skip the first part entirely. Signed-off-by:
-
Michael Hennerich authored
No functional changes Signed-off-by:
-
Michael Hennerich authored
filename is used and freed later Signed-off-by:
-
Michael Hennerich authored
In case optarg n is not given return/exit Signed-off-by:
-
Michael Hennerich authored
This patch adds support for the AD7298: 8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor via SPI bus. This patch replaces the existing ad7298.c driver completely. It was necessary since, the old driver did not comply with the IIO ABI for such devices. Changes since V1: IIO: ADC: New driver for the AD7298 8-channel SPI ADC Add documentation for new sysfs file tempX_input. Simplify bit defines. Remove outdated comments. Fix indention style. ad7298_show_temp(): Add locking. Simplify temperature calculation. Change temperature result from degrees into milli degrees Celsius. Rename file according to new sysfs ABI documentation Add timestamp attributes. Revise timestamp handling accordingly. Preset timestamp generation. Signed-off-by:
Shubhrajyoti <Shubhrajyoti@ti.com> Signed-off-by:
-
Manohar Vanga authored
Remove some more unreachable code found in bridges/vme_ca91cx42.c and bridges/vme_tsi148.c Signed-off-by:
Manohar Vanga <manohar.vanga@cern.ch> Signed-off-by:
-
Manohar Vanga authored
Remove some unreachable code (kfree calls) from vme.c Signed-off-by:
-
- 27 Feb, 2011 4 commits
-
-
Greg Kroah-Hartman authored
This driver adds mouse support to the hyper-v subsystem. The code was originally written by Citrix, modified heavily by Hank at Microsoft, and then further by me, to get it to build properly due to all of the recent hyperv changes in the tree. At the moment, it is marked "BROKEN" as it has not been tested well, and it will conflict with other api changes that KY is doing, which I will fix up later in this driver. It still needs lots of work, and normal "cleanup". I don't recommend anyone running it on their machine unless they are very brave and know how to debug kernel drivers in a hyperv system. Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Nils Faerber authored
The patch is against the 2.6.37 drivers/staging/samsung-laptop driver and implements some extra enhancements. It fixes an issue that the brightness would not change the level at once as well as and some other oddities. It was resolved by reallocated the SABI memory reagion using the "nocache" option. The patch also introduces a new set of supported netbook models, especially the NC10plus which was used for testing this patch. This new set of models also offer 9 instead of just 8 brightness levels so it also introduces an additional parameter for the models struct so that models can define their own brightness range. Signed-off-by:
Nils Faerber <nils.faerber@kernelconcepts.de> Signed-off-by:
-
Riccardo Magliocchetti authored
Signed-off-by:
Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> Signed-off-by:
-
Joe Perches authored
Change sabi_config to const. Reduces data, increases text ~200 bytes. $ size drivers/platform/x86/samsung-laptop.o* text data bss dec hex filename 6933 5084 1560 13577 3509 drivers/platform/x86/samsung-laptop.o.new 6765 5252 1560 13577 3509 drivers/platform/x86/samsung-laptop.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 25 Feb, 2011 6 commits
-
-
Greg Kroah-Hartman authored
Fixed up the printk stuff to use pr_XXX where applicable, and reversed the logic when testing for commands to complete properly. Signed-off-by: -
Greg Kroah-Hartman authored
When doing the conversion to the "support more than one model" the header address of the N128 was incorrectly copied. This fixes the driver to work properly now on this laptop model. Cc: Ingmar Steen <iksteen@gmail.com> Signed-off-by: -
Roman Grebennikov authored
Add Samsung NP-X120/X170 laptop DMI signature to samsung-laptop DMI table. Signed-off-by:
Roman Grebennikov <grebennikov.roman@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Reported-by:
Piotr Mitas <yabolus@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Reported-by:
Evgeny Bobkin <stwooe@mail.tu-berlin.de> Signed-off-by:
-
Richard Schütz authored
Add DMI data for Samsung N145P/N250P/N260P Signed-off-by:
Richard Schütz <r.schtz@t-online.de> Signed-off-by:
-
- 23 Feb, 2011 9 commits
-
-
Manohar Vanga authored
Fix loop condition in vme_register_bridge that results in an infinite loop in the event that device_register fails. Signed-off-by:
Martyn Welch <martyn.welch@ge.com> Acked-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Manohar Vanga authored
Removed some unreachable code from vme_register_bridge Signed-off-by:
-
Michael Hennerich authored
This driver allows any Blackfin system timer to be used as IIO trigger. It supports trigger rates from 0 to 100kHz in Hz resolution. Changes since V1: IIO: trigger: Apply review feedback Add comment explaining Blackfin hardware timer configurations Fix frequency_store, don't return -EINVAL for frequency set to 0 Signed-off-by:
-
Michael Hennerich authored
Add support for the AD5543/AD5553 SPI 16-/14-Bit DACs Fix typo in kconfig description Changes since V1: reorder Kconfig help text Signed-off-by:
-
Michael Hennerich authored
This patch adds support for the: AD7606/AD7606-6/AD7606-4 8/6/4-Channel Data Acquisition system (DAS) with 16-Bit, Bipolar, Simultaneous Sampling ADC. Changes since V1: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback Rename sysfs node oversampling to oversampling_ratio. Kconfig: Add GPIOLIB dependency. Use range in mV to better match HWMON. Rename ad7606_check_oversampling. Fix various comments and style. Reorder is_visible cases. Use new gpio_request_one/array and friends. Drop check for SPI max_speed_hz. Changes since V2: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback Documentation: specify unit Avoid raise condition in ad7606_scan_direct() Check return value of bus ops read_block() Changes since V3: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Add missing include file Add linux/sched.h Changes since V4: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Fix kconfig declaration consistently use tristate to avoid configuration mismatches Signed-off-by:
-
Pavan Savoy authored
This is the bluetooth protocol driver for the TI WiLink7 chipsets. Texas Instrument's WiLink chipsets combine wireless technologies like BT, FM, GPS and WLAN onto a single chip. This Bluetooth driver works on top of the TI_ST shared transport line discipline driver which also allows other drivers like FM V4L2 and GPS character driver to make use of the same UART interface. Kconfig and Makefile modifications to enable the Bluetooth driver for Texas Instrument's WiLink 7 chipset. Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Acked-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Randy Dunlap authored
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:106: error: 'acpi_gbl_FADT' undeclared (first use in this function) Fixing that one gives: ERROR: "backlight_device_register" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "lock_fb_info" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "backlight_device_unregister" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "num_registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "fb_blank" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Chris Ball <cjb@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Acked-By:
Andres Salomon <dilinger@queued.net> Signed-off-by:
-
Christopher Brannon authored
The cur_item variable from keyhelp.c is an index into a table of messages. The following condition should always hold: MSG_FUNCNAMES_START + cur_item <= MSG_FUNCNAMES_END. The check in keyhelp.c was wrong. It allowed cur_item to be incremented to an out-of-bounds value. Signed-off-by:
Christopher Brannon <chris@the-brannons.com> Signed-off-by:
-
Marcin Slusarz authored
Commit 1bd751c1 ("Staging: et131x: Clean up rxdma_csr") changed csr from bitfield to u32, but failed to convert 2 uses of halt_status bit. It did: - if (csr.bits.halt_status != 1) + if ((csr & 0x00020000) != 1) which is wrong, because second version is always true. Fix it. This bug was found by coccinelle (http://coccinelle.lip6.fr/). Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
