- 14 Apr, 2016 4 commits
-
-
Boris Brezillon authored
The hlcdc IP keep the pixel stream in raw RGB mode, and does not provide any specific connector. Since DRM_MODE_CONNECTOR_RAW_RGB does not exist, use DRM_MODE_CONNECTOR_Unknown. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Boris Brezillon authored
drm_atomic_helper_commit() does not support asynchronous commits. Replace it by a specific commit function supporting these kind of requests. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Boris Brezillon authored
Add a ->cleanup_fb() operation to avoid memory leaks when the atomic operation is interrupted after the ->prepare_fb() call. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes 2389fc13 ("drm: atmel-hlcdc: Atomic mode-setting conversion") Reviewed-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
git://github.com/patjak/drm-gma500Dave Airlie authored
A few fixes and cleanups for 4.7 that's been collecting dust in my inbox for a while. * 'gma500-next' of git://github.com/patjak/drm-gma500: drm/gma500/mdfld_dsi: remove bogus if check drm/gma500: Fix possible out of bounds read drm/gma500: fix double freeing
-
- 08 Apr, 2016 3 commits
-
-
Alan authored
Both cases produce the same result. Kill the junk code. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
Itai Handler authored
Fix possible out of bounds read, by adding missing comma. The code may read pass the end of the dsi_errors array when the most significant bit (bit #31) in the intr_stat register is set. This bug has been detected using CppCheck (static analysis tool). Cc: stable@vger.kernel.org Signed-off-by:
Itai Handler <itai_handler@hotmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
Sudip Mukherjee authored
We are allocating backing using psbfb_alloc() and so backing->stolen is always true. So we were freeing backing two times. Moreover if we follow the execution path then we should be freeing backing after we have released the helper. So remove the one which frees backing before the helper is released. While at it the error labels are also renamed to give a meaningful name. [Patrik: Fixed conflict with removal of struct_mutex] Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 05 Apr, 2016 20 commits
-
-
Dave Airlie authored
This pull request want to land the analogix_dp driver into drm/bridge directory, which reused the Exynos DP code, and add Rockchip DP support. And those patches have been: * 'drm-next-analogix-dp-v2' of github.com:yakir-Yang/linux: drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time drm: bridge: analogix/dp: add edid modes parse in get_modes method drm: bridge: analogix/dp: move hpd detect to connector detect function drm: bridge: analogix/dp: try force hpd after plug in lookup failed drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 drm: bridge: analogix/dp: add some rk3288 special registers setting dt-bindings: add document for rockchip variant of analogix_dp drm: rockchip: dp: add rockchip platform dp driver ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver dt-bindings: add document for analogix display port driver drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count drm: bridge: analogix/dp: fix some obvious code style drm: bridge: analogix/dp: rename register constants drm/exynos: dp: rename implementation specific driver part drm: bridge: analogix/dp: split exynos dp driver to bridge directory
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- VBT code refactor for a clean split between parsing&using of firmware information (Jani) - untangle the pll computation code, and splitting up the monster i9xx_crtc_compute_clocks (Ander) - dsi support for bxt (Jani, Shashank Sharma and others) - color manager (i.e. de-gamma, color conversion matrix & gamma support) from Lionel Landwerlin - Vulkan hsw support in the command parser (Jordan Justen) - large-scale renaming of intel_engine_cs variables/parameters to avoid the epic ring vs. engine confusion introduced in gen8 (Tvrtko Ursulin) - few atomic patches from Maarten&Matt, big one is two-stage wm programming on ilk-bdw - refactor driver load and add infrastructure to inject load failures for testing, from Imre - various small things all over * tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel: (179 commits) drm/i915: Update DRIVER_DATE to 20160330 drm/i915: Call intel_dp_mst_resume() before resuming displays drm/i915: Fix races on fbdev drm/i915: remove unused dev_priv->render_reclock_avail drm/i915: move sdvo mappings to vbt data drm/i915: move edp low vswing config to vbt data drm/i915: use a substruct in vbt data for edp drm/i915: replace for_each_engine() drm/i915: introduce for_each_engine_id() drm/i915/bxt: Fix DSI HW state readout drm/i915: Remove vblank wait from hsw_enable_ips, v2. drm/i915: Tidy aliasing_gtt_bind_vma() drm/i915: Split PNV version of crtc_compute_clock() drm/i915: Split g4x_crtc_compute_clock() drm/i915: Split i8xx_crtc_compute_clock() drm/i915: Split CHV and VLV specific crtc_compute_clock() hooks drm/i915: Merge ironlake_compute_clocks() and ironlake_crtc_compute_clock() drm/i915: Move fp divisor calculation into ironlake_compute_dpll() drm/i915: Pass crtc_state->dpll directly to ->find_dpll() drm/i915: Simplify ironlake_crtc_compute_clock() CPU eDP case ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
* tag 'topic/drm-misc-2016-04-01' of git://anongit.freedesktop.org/drm-intel: drm: Add new DCS commands in the enum list drm: Make uapi headers C89 pendantic compliant drm/atomic: export drm_atomic_helper_wait_for_fences() drm: Untangle __KERNEL__ guards drm: Move DRM_MODE_OBJECT_* to uapi headers drm: align #include directives with libdrm in uapi headers drm: Make drm.h uapi header safe for C++ vgacon: dummy implementation for vgacon_text_force drm/sysfs: Nuke TV/DVI property files drm/ttm: Remove TTM_HAS_AGP drm: bridge/dw-hdmi: Remove pre_enable/post_disable dummy funcs Revert "drm: Don't pass negative delta to ktime_sub_ns()" drm/atmel: Fixup drm_connector_/unplug/unregister/_all drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() drm: bridge: Make (pre/post) enable/disable callbacks optional
-
Yakir Yang authored
It may caused a dead lock if we flush the hpd work in bridge disable time. The normal flow would like: IN --> DRM IOCTL 1. Acquire crtc_ww_class_mutex (DRM IOCTL) IN --> analogix_dp_bridge 2. Acquire hpd work lock (Flush hpd work) 3. HPD work already in idle, no need to run the work function. OUT <-- analogix_dp_bridge OUT <-- DRM IOCTL The dead lock flow would like: IN --> DRM IOCTL 1. Acquire crtc_ww_class_mutex (DRM IOCTL) IN --> analogix_dp_bridge 2. Acquire hpd work lock (Flush hpd work) IN --> analogix_dp_hotplug IN --> drm_helper_hpd_irq_event 3. Acquire mode_config lock (This lock already have been acquired in previous step 1) ** Dead Lock Now ** It's wrong to flush the hpd work in bridge->disable time, I guess the original code just want to ensure the delay work must be finish before encoder disabled. The flush work in bridge disable time is try to ensure the HPD event won't be missed before display card disabled, actually we can take a fast respond way(interrupt thread) to update DRM HPD event to fix the delay update and possible dead lock. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Turn off the panel power in suspend time would help to reduce power waste. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Display Port monitor could support kinds of mode which indicate in monitor edid, not just one single display resolution which defined in panel or devivetree property display timing. Note: Gustavo Padovan try to remove the controller and phy power on function in bind time at bellow commit: drm/exynos: do not start enabling DP at bind() phase But for now driver need to read edid message in .get_modes() function, so controller must be inited in bind time, so we need to add controller init back. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
This change just make a little clean to make code more like drm core expect, move hdp detect code from bridge->enable(), and place them into connector->detect(). Note: Gustavo Padovan try to remove the controller and phy power on function in bind time at bellow commit: drm/exynos: do not start enabling DP at bind() phase But for now the connector status don't hardcode to connected, need to operate dp phy in .detect function, so we need to revert parts if Gustavo Padovan's changes, add phy poweron function in bind time. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Some edp screen do not have hpd signal, so we can't just return failed when hpd plug in detect failed. This is an hardware property, so we need add a devicetree property "analogix,need-force-hpd" to indicate this sutiation. Acked-by:
Rob Herring <robh@kernel.org> Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
There are some IP limit on rk3288 that only support 4 physical lanes of 2.7/1.6 Gbps/lane, so seprate them out by device_type flag. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
RK3288 need some special registers setting, we can separate them out by the dev_type of plat_data. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Rockchip DP driver is a helper driver of analogix_dp coder driver, so most of the DT property should be descriped in analogix_dp document. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Rockchip have three clocks for dp controller, we leave pclk_edp to analogix_dp driver control, and keep the sclk_edp_24m and sclk_edp in platform driver. Acked-by:
Mark Yao <mark.yao@rock-chips.com> Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Yakir Yang <ykk@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Yakir Yang authored
After exynos_dp have been split the common IP code into analogix_dp driver, the analogix_dp driver have deprecated some Samsung platform properties which could be dynamically parsed from EDID/MODE/DPCD message, so this is an update for Exynos DTS file for dp-controller. Beside the backward compatibility is fully preserved, so there are no bisectability break that make this change in a separate patch. Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Analogix dp driver is split from exynos dp driver, so we just make an copy of exynos_dp.txt, and then simplify exynos_dp.txt Beside update some exynos dtsi file with the latest change according to the devicetree binding documents. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Both hsync/vsync polarity and interlace mode can be parsed from drm display mode, and dynamic_range and ycbcr_coeff can be judge by the video code. But presumably Exynos still relies on the DT properties, so take good use of mode_fixup() in to achieve the compatibility hacks. Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
link_rate and lane_count already configured in analogix_dp_set_link_train(), so we don't need to config those repeatly after training finished, just remove them out. Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Fix some obvious alignment problems, like alignment and line over 80 characters problems, make this easy to be maintained later. Acked-by:
Jingoo Han <jingoohan1@gmail.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Heiko Stuebner authored
In the original split we kept the register constants intact to keep the diff small. Still the constants are Analogix-specific, so rename them now. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Heiko Stuebner authored
The core functionality now resides in the generic bridge part so the exynos-specific implementation details can get a more suitable nameing. Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Yakir Yang <ykk@rock-chips.com>
-
Yakir Yang authored
Split the dp core driver from exynos directory to bridge directory, and rename the core driver to analogix_dp_*, rename the platform code to exynos_dp. Beside the new analogix_dp driver would export six hooks. "analogix_dp_bind()" and "analogix_dp_unbind()" "analogix_dp_suspned()" and "analogix_dp_resume()" "analogix_dp_detect()" and "analogix_dp_get_modes()" The bind/unbind symbols is used for analogix platform driver to connect with analogix_dp core driver. And the detect/get_modes is used for analogix platform driver to init the connector. They reason why connector need register in helper driver is rockchip drm haven't implement the atomic API, but Exynos drm have implement it, so there would need two different connector helper functions, that's why we leave the connector register in helper driver. Acked-by:
Inki Dae <inki.dae@samsung.com> Tested-by:
Caesar Wang <wxt@rock-chips.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Yakir Yang <ykk@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
- 03 Apr, 2016 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc kernel side fixes: - fix event leak - fix AMD PMU driver bug - fix core event handling bug - fix build bug on certain randconfigs Plus misc tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix pmu::stop() nesting perf/core: Don't leak event in the syscall error path perf/core: Fix time tracking bug with multiplexing perf jit: genelf makes assumptions about endian perf hists: Fix determination of a callchain node's childlessness perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples perf tools: Fix build break on powerpc perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers perf tests: Fix tarpkg build test error output redirection
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core kernel fixes from Ingo Molnar: "This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness you noted during the original nohz pull request, plus there's also misc fixes: - fix liblockdep build bug - fix uapi header build bug - print more lockdep hash collision info to help debug recent reports of hash collisions - update MAINTAINERS email address" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Update my email address locking/lockdep: Print chain_key collision information uapi/linux/stddef.h: Provide __always_inline to userspace headers tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh locking/atomic, sched: Unexport fetch_or() timers/nohz: Convert tick dependency mask to atomic_t locking/atomic: Introduce atomic_fetch_or()
-
Linus Torvalds authored
Commit 840f5b05 ("media: au0828 disable tuner to demod link in au0828_media_device_register()") removed all uses of the 'dtv_demod', but left the variable itself around. Remove it. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This lot contains: - Some fixups for the fallout of the topology consolidation which unearthed AMD/Intel inconsistencies - Documentation for the x86 topology management - Support for AMD advanced power management bits - Two simple cleanups removing duplicated code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add advanced power management bits x86/thread_info: Merge two !__ASSEMBLY__ sections x86/cpufreq: Remove duplicated TDP MSR macro definitions x86/Documentation: Start documenting x86 topology x86/cpu: Get rid of compute_unit_id perf/x86/amd: Cleanup Fam10h NB event constraints x86/topology: Fix AMD core count
-
- 02 Apr, 2016 8 commits
-
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc fix from Bjorn Andersson: "Fix incorrect error check in the ST remoteproc driver and advertise the newly created linux-remoteproc mailing list" * tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc: MAINTAINERS: Add mailing list for remote processor subsystems remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "This includes fixes from HCH for -rc1 configfs default_groups conversion changes that ended up breaking some iscsi-target default_groups, along with Sagi's ib_drain_qp() conversion for iser-target to use the common caller now available to RDMA kernel consumers in v4.6+ code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: add a new add_wwn_groups fabrics method target: initialize the nacl base CIT begfore init_nodeacl target: remove ->fabric_cleanup_nodeacl iser-target: Use ib_drain_qp
-
Linus Torvalds authored
Commit d4edcf0d ("mm/gup: Switch all callers of get_user_pages() to not pass tsk/mm") switched get_user_pages() callers to the simpler model where they no longer pass in the thread and mm pointer. But since then we've merged changes to a few drivers that re-introduce use of the old interface. Let's fix them up. They continued to work fine (thanks to the truly disgusting macros introduced in commit cde70140: "mm/gup: Overload get_user_pages() functions"), but cause unnecessary build noise. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/configfsLinus Torvalds authored
Pull configfs fix from Christoph Hellwig: "A trivial fix to the recently introduced binary attribute helper macros" * tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs: configfs: fix CONFIGFS_BIN_ATTR_[RW]O definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only
-