- 07 Oct, 2016 1 commit
-
-
Peter Zijlstra authored
commit ecf7d01c upstream. Oleg noticed that its possible to falsely observe p->on_cpu == 0 such that we'll prematurely continue with the wakeup and effectively run p on two CPUs at the same time. Even though the overlap is very limited; the task is in the middle of being scheduled out; it could still result in corruption of the scheduler data structures. CPU0 CPU1 set_current_state(...) <preempt_schedule> context_switch(X, Y) prepare_lock_switch(Y) Y->on_cpu = 1; finish_lock_switch(X) store_release(X->on_cpu, 0); try_to_wake_up(X) LOCK(p->pi_lock); t = X->on_cpu; // 0 context_switch(Y, X) prepare_lock_switch(X) X->on_cpu = 1; finish_lock_switch(Y) store_release(Y->on_cpu, 0); </preempt_schedule> schedule(); deactivate_task(X); X->on_rq = 0; if (X->on_rq) // false if (t) while (X->on_cpu) cpu_relax(); context_switch(X, ..) finish_lock_switch(X) store_release(X->on_cpu, 0); Avoid the load of X->on_cpu being hoisted over the X->on_rq load. Reported-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
- 06 Oct, 2016 34 commits
-
-
Jeff Mahoney authored
Prior to v3.17, XFS used positive error codes internally. Commit af8d9716 (xfs: inode recovery readahead can race with inode buffer creation), upstream commit b79f4a1c backported from later releases need the error code signs reversed. Negative error codes will cause assertion failures (BUG_ON on kernels with assertions enabled. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 51093254 upstream. Let the target core check task existence instead of the SRP target driver. Additionally, let the target core check the validity of the task management request instead of the ib_srpt driver. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt] Oops: 0002 [#1] SMP Call Trace: [<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt] [<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt] [<ffffffff8109726f>] kthread+0xcf/0xe0 [<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0 Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 3e4f5748 ("ib_srpt: Convert TMR path to target_submit_tmr") Tested-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Acked-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Oliver Neukum authored
commit 60bcabd0 upstream. This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kinglong Mee authored
commit 3f42d2c4 upstream. Connection from alloc_conn must be freed through free_conn, otherwise, the reference of svc_xprt will never be put. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Michal Hocko authored
commit 735f2770 upstream. Commit fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") has caused a subtle regression in nscd which uses CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the shared databases, so that the clients are notified when nscd is restarted. Now, when nscd uses a non-persistent database, clients that have it mapped keep thinking the database is being updated by nscd, when in fact nscd has created a new (anonymous) one (for non-persistent databases it uses an unlinked file as backend). The original proposal for the CLONE_CHILD_CLEARTID change claimed (https://lkml.org/lkml/2006/10/25/233): : The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls : on behalf of pthread_create() library calls. This feature is used to : request that the kernel clear the thread-id in user space (at an address : provided in the syscall) when the thread disassociates itself from the : address space, which is done in mm_release(). : : Unfortunately, when a multi-threaded process incurs a core dump (such as : from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of : the other threads, which then proceed to clear their user-space tids : before synchronizing in exit_mm() with the start of core dumping. This : misrepresents the state of process's address space at the time of the : SIGSEGV and makes it more difficult for someone to debug NPTL and glibc : problems (misleading him/her to conclude that the threads had gone away : before the fault). : : The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a : core dump has been initiated. The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269) seems to have a larger scope than the original patch asked for. It seems that limitting the scope of the check to core dumping should work for SIGSEGV issue describe above. [Changelog partly based on Andreas' description] Fixes: fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Tested-by:
William Preston <wpreston@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 32a15832 upstream. It looks like clockevents_unbind is being exported by mistake as: - it is static; - it is not listed in include/linux/clockchips.h; - EXPORT_SYMBOL_GPL(clockevents_unbind) follows clockevents_unbind_device() implementation. I think clockevents_unbind_device should be exported instead. This is going to be used to teardown Hyper-V clockevent devices on module unload. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Joerg Roedel authored
commit 3254de6b upstream. Not doing so might cause IO-Page-Faults when a device uses an alias request-id and the alias-dte is left in a lower page-mode which does not cover the address allocated from the iova-allocator. Fixes: 492667da ('x86/amd-iommu: Remove amd_iommu_pd_table') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
WANG Cong authored
commit 205e1e25 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Khem Raj authored
commit 1e407ee3 upstream. gcc-6 correctly warns about a out of bounds access arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds] offsetof(struct thread_fp_state, fpr[32][0])); ^ check the end of array instead of beginning of next element to fix this Signed-off-by:
Khem Raj <raj.khem@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Segher Boessenkool <segher@kernel.crashing.org> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
commit 4fa9a3f6 upstream. This struct is unused, which is now a build error with gcc 6: error: 'os_area_db_id_video_mode' defined but not used There doesn't seem to be any good reason to keep it around so remove it, it's in the history if anyone needs it. Signed-off-by:
-
Sam Ravnborg authored
commit 6eb64b8c upstream. Fix headers_install by adjusting the path to arch files. And delete unused Kbuild file. Drop special handling of cris in the headers.sh script as a nice side-effect. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Balbir Singh authored
commit 135e8c92 upstream. The origin of the issue I've seen is related to a missing memory barrier between check for task->state and the check for task->on_rq. The task being woken up is already awake from a schedule() and is doing the following: do { schedule() set_current_state(TASK_(UN)INTERRUPTIBLE); } while (!cond); The waker, actually gets stuck doing the following in try_to_wake_up(): while (p->on_cpu) cpu_relax(); Analysis: The instance I've seen involves the following race: CPU1 CPU2 while () { if (cond) break; do { schedule(); set_current_state(TASK_UN..) } while (!cond); wakeup_routine() spin_lock_irqsave(wait_lock) raw_spin_lock_irqsave(wait_lock) wake_up_process() } try_to_wake_up() set_current_state(TASK_RUNNING); .. list_del(&waiter.list); CPU2 wakes up CPU1, but before it can get the wait_lock and set current state to TASK_RUNNING the following occurs: CPU3 wakeup_routine() raw_spin_lock_irqsave(wait_lock) if (!list_empty) wake_up_process() try_to_wake_up() raw_spin_lock_irqsave(p->pi_lock) .. if (p->on_rq && ttwu_wakeup()) .. while (p->on_cpu) cpu_relax() .. CPU3 tries to wake up the task on CPU1 again since it finds it on the wait_queue, CPU1 is spinning on wait_lock, but immediately after CPU2, CPU3 got it. CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and the task is spinning on the wait_lock. Interestingly since p->on_rq is checked under pi_lock, I've noticed that try_to_wake_up() finds p->on_rq to be 0. This was the most confusing bit of the analysis, but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq check is not reliable without this fix IMHO. The race is visible (based on the analysis) only when ttwu_queue() does a remote wakeup via ttwu_queue_remote. In which case the p->on_rq change is not done uder the pi_lock. The result is that after a while the entire system locks up on the raw_spin_irqlock_save(wait_lock) and the holder spins infintely Reproduction of the issue: The issue can be reproduced after a long run on my system with 80 threads and having to tweak available memory to very low and running memory stress-ng mmapfork test. It usually takes a long time to reproduce. I am trying to work on a test case that can reproduce the issue faster, but thats work in progress. I am still testing the changes on my still in a loop and the tests seem OK thus far. Big thanks to Benjamin and Nick for helping debug this as well. Ben helped catch the missing barrier, Nick caught every missing bit in my theory. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [ Updated comment to clarify matching barriers. Many architectures do not have a full barrier in switch_to() so that cannot be relied upon. ] Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <nicholas.piggin@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.comSigned-off-by:
-
Dan Carpenter authored
commit 8a545f18 upstream. We can't pass error pointers to kfree() or it causes an oops. Fixes: 52b209f7 ('get rid of hostfs_read_inode()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Dan Carpenter authored
commit f4cceb2a upstream. If kmap fails, it leads to memory corruption. Fixes: f64122c1 ('drm: add new QXL driver. (v1.4)') Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwandaSigned-off-by:
-
Yadi.hu authored
commit 371a0153 upstream. the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by:
Yadi.hu <yadi.hu@windriver.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Jeff Mahoney authored
commit 325c50e3 upstream. If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e7090 (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c (Btrfs: add snapshot/subvolume destroy ioctl) Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Fabio Estevam authored
commit 4de349e7 upstream. On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 1245800c upstream. The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f ("tracing/core: make the read callbacks reentrants") Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Al Viro authored
commit 1ae2293d upstream. Signed-off-by:
-
Dan Carpenter authored
commit 79ad07d4 upstream. There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa8 ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Al Viro authored
commit e23d4159 upstream. Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
-
Colin Ian King authored
commit b6acb0cf upstream. Fix indent warning when building with gcc 6: drivers/staging/iio/adc/ad7192.c:239:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 2cce76c3 upstream. gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 8e0cc8c3 upstream. gcc points out code that is not indented the way it is interpreted: net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen': net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] return cfpkt_getlen(pkt); ^~~~~~ net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not else ^~~~ It is clear from the context that not returning here would be a bug, as we'd end up passing a negative length into a function that takes a u16 length, so it is not missing curly braces here, and I'm assuming that the indentation is the only part that's wrong about it. Signed-off-by:
-
Steven Rostedt authored
commit 377ccbb4 upstream. With the latest gcc compilers, they give a warning if __builtin_return_address() parameter is greater than 0. That is because if it is used by a function called by a top level function (or in the case of the kernel, by assembly), it can try to access stack frames outside the stack and crash the system. The tracing system uses __builtin_return_address() of up to 2! But it is well aware of the dangers that it may have, and has even added precautions to protect against it (see the thunk code in arch/x86/entry/thunk*.S) Linus originally added KBUILD_CFLAGS that would suppress the warning for the entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory wouldn't work. The tracing directory plays a bit with the CFLAGS and requires a little more logic. This adds that special logic to only suppress the warning for the tracing directory. If it is used anywhere else outside of tracing, the warning will still be triggered. Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.homeTested-by:
-
Linus Torvalds authored
commit 124a3d88 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:
-
Linus Torvalds authored
commit 6e8d666e upstream. Several build configurations had already disabled this warning because it generates a lot of false positives. But some had not, and it was still enabled for "allmodconfig" builds, for example. Looking at the warnings produced, every single one I looked at was a false positive, and the warnings are frequent enough (and big enough) that they can easily hide real problems that you don't notice in the noise generated by -Wmaybe-uninitialized. The warning is good in theory, but this is a classic case of a warning that causes more problems than the warning can solve. If gcc gets better at avoiding false positives, we may be able to re-enable this warning. But as is, we're better off without it, and I want to be able to see the *real* warnings. Signed-off-by:
-
Arnd Bergmann authored
commit e72e2dfe upstream. When gcov profiling is enabled, we see a lot of spurious warnings about possibly uninitialized variables being used: arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page': arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup': drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized] kernel/cgroup.c: In function 'cgroup_mount': kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized] All of these are false positives, so it seems better to just disable the warnings whenever GCOV is enabled. Most users don't enable GCOV, and based on a prior patch, it is now also disabled for 'allmodconfig' builds, so there should be no downsides of doing this. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Arnd Bergmann authored
commit 815eb71e upstream. CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints incorrect warnings about a lot of variables that it thinks can be used uninitialized, e.g.: i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer': i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function iio/gyro/itg3200_core.c: In function 'itg3200_probe': iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits': leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function misc/bmp085.c: In function 'show_pressure': misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function power/ds2782_battery.c: In function 'ds2786_get_capacity': power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function These are all false positives that either rob someone's time when trying to figure out whether they are real, or they get people to send wrong patches to shut up the warnings. Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in production, so disabling the whole class of warnings for this configuration has no serious downsides either. Signed-off-by:
-
Robert Jarzmik authored
commit 51193b76 upstream. When the kernel path contains a space or a colon somewhere in the path name, the modules_install target doesn't work anymore, as the path names are not enclosed in double quotes. It is also supposed that and O= build will suffer from the same weakness as modules_install. Instead of checking and improving kbuild to resist to directories including these characters, error out early to prevent any build if the kernel's main directory contains a space. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Wang YanQing authored
commit 40ab87a4 upstream. Commit 62718979 ("Makefile: Document ability to make file.lst and file.S") document ability to make file.S, but there isn't such ability in kbuild, so revert it. Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Michal Marek authored
commit a85a41ed upstream. Based on a x86-only patch by Andy Lutomirski <luto@amacapital.net> With modular kernels, 'make install' is going to need the installed modules at some point to generate the initramfs. Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Ashish Samant authored
commit d21c353d upstream. If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reported-by:
Saar Maoz <saar.maoz@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by:
-
Joseph Qi authored
commit e6f0c6e6 upstream. Commit ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
- 29 Sep, 2016 5 commits
-
-
Herbert Xu authored
commit acdb04d0 upstream. When we need to allocate a temporary blkcipher_walk_next and it fails, the code is supposed to take the slow path of processing the data block by block. However, due to an unrelated change we instead end up dereferencing the NULL pointer. This patch fixes it by moving the unrelated bsize setting out of the way so that we enter the slow path as inteded. Fixes: 7607bd8f ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Reported-by:
xiakaixu <xiakaixu@huawei.com> Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
-
Jeff Mahoney authored
commit 0a11b9aa upstream. new_insert_key only makes any sense when it's associated with a new_insert_ptr, which is initialized to NULL and changed to a buffer_head when we also initialize new_insert_key. We can key off of that to avoid the uninitialized warning. Link: http://lkml.kernel.org/r/5eca5ffb-2155-8df2-b4a2-f162f105efed@suse.comSigned-off-by:
-
Arnd Bergmann authored
commit c87bf431 upstream. Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx': lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=] After some investigation, I found that this behavior started with gcc-4.9, and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702. A suggested workaround for it is to use the -fno-tree-loop-im flag that turns off one of the optimization stages in gcc, so the code runs a little slower but does not use excessive amounts of stack. We could make this conditional on the gcc version, but I could not find an easy way to do this in Kbuild and the benefit would be fairly small, given that most of the gcc version in production are affected now. I'm marking this for 'stable' backports because it addresses a bug with code generation in gcc that exists in all kernel versions with the affected gcc releases. Signed-off-by:
-
Jiri Slaby authored
-
Guenter Roeck authored
commit 8e4b7205 upstream. Since commit acb2505d ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d ("openrisc: fix copy_from_user()") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
