- 09 Jul, 2013 40 commits
-
-
Davidlohr Bueso authored
While the INFO cmd doesn't take the ipc lock, the STAT commands do acquire it unnecessarily. We can do the permissions and security checks only holding the rcu lock. This function now mimics semctl_nolock(). Signed-off-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
Add msq_obtain_object() and msq_obtain_object_check(), which will allow us to get the ipc object without acquiring the lock. Just as with semaphores, these functions are basically wrappers around ipc_obtain_object*(). Signed-off-by:
-
Davidlohr Bueso authored
Similar to semctl, when calling msgctl, the *_INFO and *_STAT commands can be performed without acquiring the ipc object. Add a msgctl_nolock() function and move the logic of *_INFO and *_STAT out of msgctl(). This change still takes the lock and it will be properly lockless in the next patch Signed-off-by:
-
Davidlohr Bueso authored
Instead of holding the ipc lock for the entire function, use the ipcctl_pre_down_nolock and only acquire the lock for specific commands: RMID and SET. Signed-off-by:
-
Davidlohr Bueso authored
This function currently acquires both the rw_mutex and the rcu lock on successful lookups, leaving the callers to explicitly unlock them, creating another two level locking situation. Make the callers (including those that still use ipcctl_pre_down()) explicitly lock and unlock the rwsem and rcu lock. Signed-off-by:
-
Davidlohr Bueso authored
Signed-off-by:
-
Davidlohr Bueso authored
Simple helpers around the (kern_ipc_perm *)->lock spinlock. Signed-off-by:
-
Davidlohr Bueso authored
This patchset continues the work that began in the sysv ipc semaphore scaling series, see https://lkml.org/lkml/2013/3/20/546 Just like semaphores used to be, sysv shared memory and msg queues also abuse the ipc lock, unnecessarily holding it for operations such as permission and security checks. This patchset mostly deals with mqueues, and while shared mem can be done in a very similar way, I want to get these patches out in the open first. It also does some pending cleanups, mostly focused on the two level locking we have in ipc code, taking care of ipc_addid() and ipcctl_pre_down_nolock() - yes there are still functions that need to be updated as well. This patch: Make all callers explicitly take and release the RCU read lock. This addresses the two level locking seen in newary(), newseg() and newqueue(). For the last two, explicitly unlock the ipc object and the rcu lock, instead of calling the custom shm_unlock and msg_unlock functions. The next patch will deal with the open coded locking for ->perm.lock Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Oleg Nesterov authored
flush_ptrace_hw_breakpoint() destroys the counters set by ptrace, but "leaks" ->debugreg6 and ->ptrace_dr7. The problem is minor, but still it doesn't look right and flush_thread() did this until commit 66cb5917 ("hw-breakpoints: use the new wrapper routines to access debug registers in process/thread code"). Now that PTRACE_DETACH does flush_ too this makes even more sense. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Oleg Nesterov authored
Change ptrace_detach() to call flush_ptrace_hw_breakpoint(child). This frees the slots for non-ptrace PERF_TYPE_BREAKPOINT users, and this ensures that the tracee won't be killed by SIGTRAP triggered by the active breakpoints. Test-case: unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void func(void) { } int main(void) { int pid, stat; unsigned long dr7; pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGHUP); func(); return 0x13; } assert(pid == waitpid(-1, &stat, 0)); assert(WSTOPSIG(stat) == SIGHUP); assert(write_dr(pid, 0, (long)func) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); assert(ptrace(PTRACE_DETACH, pid, 0,0) == 0); assert(pid == waitpid(-1, &stat, 0)); assert(stat == 0x1300); return 0; } Before this patch the child is killed after PTRACE_DETACH. Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Oleg Nesterov authored
ptrace_set_debugreg() is trivial but looks horrible. Kill the unnecessary goto's and return's to cleanup the code. This matches ptrace_get_debugreg() which also needs the trivial whitespace cleanups. Signed-off-by:
-
Oleg Nesterov authored
Commit 24f1e32c ("hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events") introduced the minor regression. Before this commit PTRACE_POKEUSER DR7, enableDR0 PTRACE_POKEUSER DR0, address was perfectly valid, now PTRACE_POKEUSER(DR7) fails if DR0 was not previously initialized by PTRACE_POKEUSER(DR0). Change ptrace_write_dr7() to do ptrace_register_breakpoint(addr => 0) if !bp && !disabled. This fixes watchpoint-zeroaddr from ptrace-tests, see https://bugzilla.redhat.com/show_bug.cgi?id=660204. Signed-off-by:
Jan Kratochvil <jan.kratochvil@redhat.com> Acked-by:
-
Oleg Nesterov authored
No functional changes, preparation. Extract the "register breakpoint" code from ptrace_get_debugreg() into the new/generic helper, ptrace_register_breakpoint(). It will have more users. The patch also adds another simple helper, ptrace_fill_bp_fields(), to factor out the arch_bp_generic_fields() logic in register/modify. Signed-off-by:
-
Oleg Nesterov authored
ptrace_write_dr7() skips ptrace_modify_breakpoint(disabled => true) unless second_pass, this buys nothing but complicates the code and means that we always do the main loop twice even if "disabled" was never true. The comment says: Don't unregister the breakpoints right-away, unless all register_user_hw_breakpoint() requests have succeeded. Firstly, we do not do register_user_hw_breakpoint(), it was removed by commit 24f1e32c ("hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events"). We are going to restore register_user_hw_breakpoint() (see the next patch) but this doesn't matter: after commit 44234adc ("hw-breakpoints: Modify breakpoints without unregistering them") perf_event_disable() can not hurt, hw_breakpoint_del() does not free the slot. Remove the "second_pass" check from the main loop and simplify the code. Since we have to check "bp != NULL" anyway, the patch also removes the same check in ptrace_modify_breakpoint() and moves the comment into ptrace_write_dr7(). With this patch the second pass is only needed to restore the saved old_dr7. This should never fail, so the patch adds WARN_ON() to catch the potential problems as Frederic suggested. Signed-off-by:
-
Oleg Nesterov authored
ptrace_write_dr7() looks unnecessarily overcomplicated. We can factor out ptrace_modify_breakpoint() and do not do "continue" twice, just we need to pass the proper "disabled" argument to ptrace_modify_breakpoint(). Signed-off-by:
-
Oleg Nesterov authored
This reverts commit bf26c018 ("Prepare to fix racy accesses on task breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Now that ptrace_get_breakpoints/ptrace_put_breakpoints have no callers, we can kill them and remove task->ptrace_bp_refcnt. Signed-off-by:
Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Oleg Nesterov authored
This reverts commit e0ac8457 ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Signed-off-by:
-
Oleg Nesterov authored
This reverts commit bf0b8f4b ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Oleg Nesterov authored
This reverts commit 07fa7a0a ("hw_breakpoints: Fix racy access to ptrace breakpoints") and removes ptrace_get/put_breakpoints() added by other commits. The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Signed-off-by:
-
Oleg Nesterov authored
This reverts commit 87dc669b ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. The patch only removes ptrace_get_breakpoints/ptrace_put_breakpoints and does a couple of "while at it" cleanups, it doesn't remove other changes from the reverted commit. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
-
Mike Lockwood authored
This patch, originally from Android kernel, adds vfat ioctl command FAT_IOCTL_GET_VOLUME_ID, with this command we can get the vfat volume ID using following code: ioctl(fd, FAT_IOCTL_GET_VOLUME_ID, &volume_ID) This patch is a modified version of the patch by Mike Lockwood, with changes from Dmitry Pervushin, who noticed the original patch makes some volume IDs abiguous with error returns: for example, if volume id is 0xFFFFFDAD, that matches -ENOIOCTLCMD, we get "FFFFFFFF" from the user space. So add a parameter to ioctl to get the correct volume ID. Android uses vfat volume ID to identify different sd card, when a new sd card is inserted to device, android can scan the media on it and pop up new contents. Signed-off-by:
Bintian Wang <bintian.wang@linaro.org> Cc: dmitry pervushin <dpervushin@gmail.com> Cc: Mike Lockwood <lockwood@android.com> Cc: Colin Cross <ccross@android.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: John Stultz <john.stultz@linaro.org> Cc: Sean McNeil <sean@mcneil.com> Signed-off-by:
-
Fabio Estevam authored
stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Wei Yongjun authored
Fix to return -EINVAL from the option parse error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
-
Joe Perches authored
Might as well check include timestamps and cache the include file CamelCase uses for the non-git case too. The camelcase cache file is now named: for git: .checkpatch-camelcase.git.<commit_id> for non-git: .checkpatch-camelcase.date.<YYYYMMDDhhmm> All .checkpatch-camelcase* files are deleted if not current. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Alex Thorlton authored
Add the cpu/pid that called WARN() so that the stack traces can be matched up with the WARNING messages. [akpm@linux-foundation.org: remove stray quote] Signed-off-by:
Alex Thorlton <athorlton@sgi.com> Reviewed-by:
Robin Holt <holt@sgi.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Toshi Kani authored
online_pages() is called from memory_block_action() when a user requests to online a memory block via sysfs. This function needs to return a proper error value in case of error. Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Michal Hocko authored
min_free_kbytes is updated during memory hotplug (by init_per_zone_wmark_min) currently which is right thing to do in most cases but this could be unexpected if admin increased the value to prevent from allocation failures and the new min_free_kbytes would be decreased as a result of memory hotadd. This patch saves the user defined value and allows updating min_free_kbytes only if it is higher than the saved one. A warning is printed when the new value is ignored. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Li Zefan authored
Now memcg has the same life cycle with its corresponding cgroup, and a cgroup is freed via RCU and then mem_cgroup_css_free() will be called in a work function, so we can simply call __mem_cgroup_free() in mem_cgroup_css_free(). This actually reverts commit 59927fb9 ("memcg: free mem_cgroup by RCU to fix oops"). Signed-off-by:
Li Zefan <lizefan@huawei.com> Cc: Hugh Dickins <hughd@google.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Li Zefan authored
Now memcg has the same life cycle as its corresponding cgroup. Kill the useless refcnt. Signed-off-by:
-
Li Zefan authored
The cgroup core guarantees it's always safe to access the parent. Signed-off-by:
-
Li Zefan authored
Use css_get/put instead of mem_cgroup_get/put. A simple replacement will do. The historical reason that memcg has its own refcnt instead of always using css_get/put, is that cgroup couldn't be removed if there're still css refs, so css refs can't be used as long-lived reference. The situation has changed so that rmdir a cgroup will succeed regardless css refs, but won't be freed until css refs goes down to 0. Signed-off-by:
-
Li Zefan authored
Use css_get/put instead of mem_cgroup_get/put. We can't do a simple replacement, because here mem_cgroup_put() is called during mem_cgroup_css_free(), while mem_cgroup_css_free() won't be called until css refcnt goes down to 0. Instead we increment css refcnt in mem_cgroup_css_offline(), and then check if there's still kmem charges. If not, css refcnt will be decremented immediately, otherwise the refcnt will be released after the last kmem allocation is uncahred. [akpm@linux-foundation.org: tweak comment] Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Li Zefan authored
Use css_get()/css_put() instead of mem_cgroup_get()/mem_cgroup_put(). There are two things being done in the current code: First, we acquired a css_ref to make sure that the underlying cgroup would not go away. That is a short lived reference, and it is put as soon as the cache is created. At this point, we acquire a long-lived per-cache memcg reference count to guarantee that the memcg will still be alive. so it is: enqueue: css_get create : memcg_get, css_put destroy: memcg_put So we only need to get rid of the memcg_get, change the memcg_put to css_put, and get rid of the now extra css_put. (This changelog is mostly written by Glauber) Signed-off-by:
-
Li Zefan authored
Use css_get/css_put instead of mem_cgroup_get/put. Note, if at the same time someone is moving @current to a different cgroup and removing the old cgroup, css_tryget() may return false, and sock->sk_cgrp won't be initialized, which is fine. Signed-off-by:
-
Michal Hocko authored
mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails. This is not correct because only memcg_propagate_kmem takes an additional reference while mem_cgroup_sockets_init is allowed to fail as well (although no current implementation fails) but it doesn't take any reference. This all suggests that it should be memcg_propagate_kmem that should clean up after itself so this patch moves mem_cgroup_put over there. Unfortunately this is not that easy (as pointed out by Li Zefan) because memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if memcg_propagate_kmem fails so the additional reference is dropped in that case in kmem_cgroup_destroy which means that the reference would be dropped two times. The easiest way then would be to simply remove mem_cgrroup_put from mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right thing. Signed-off-by:
-
Michal Hocko authored
This reverts commit e4715f01. mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops an additional reference from all parents so the additional mem_cgrroup_put(parent) potentially causes use-after-free. Signed-off-by:
-
Jörn Engel authored
It is counterintuitive at best that mmap'ing a hugetlbfs file with MAP_HUGETLB fails, while mmap'ing it without will a) succeed and b) return huge pages. v2: use is_file_hugepages(), as suggested by Jianguo Signed-off-by:
Joern Engel <joern@logfs.org> Cc: Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Mel Gorman authored
After the patch "mm: vmscan: Flatten kswapd priority loop" was merged the scanning priority of kswapd changed. The priority now rises until it is scanning enough pages to meet the high watermark. shrink_inactive_list sets ZONE_WRITEBACK if a number of pages were encountered under writeback but this value is scaled based on the priority. As kswapd frequently scans with a higher priority now it is relatively easy to set ZONE_WRITEBACK. This patch removes the scaling and treates writeback pages similar to how it treats unqueued dirty pages and congested pages. The user-visible effect should be that kswapd will writeback fewer pages from reclaim context. Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
Direct reclaim is not aborting to allow compaction to go ahead properly. do_try_to_free_pages is told to abort reclaim which is happily ignores and instead increases priority instead until it reaches 0 and starts shrinking file/anon equally. This patch corrects the situation by aborting reclaim when requested instead of raising priority. Signed-off-by:
-
