- 03 Feb, 2012 39 commits
-
-
Kentaro Matsuyama authored
commit e423d740 upstream. Add vendor and product ID for USB 3G/LTE modem of docomo L-02C Signed-off-by:
Kentaro Matsuyama <kentaro.matsuyama@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
nagalakshmi.nandigama@lsi.com authored
commit 2cb6fc8c upstream. Removed redundant calling of _scsih_probe_devices() from _scsih_probe as it is getting called from _scsih_scan_finished. Also moved the function scsi_scan_host(shost) to get called after the volumes on warp drive are reported to the OS. Otherwise by the time the (ioc->hide_drives) flags is set, the volumes on warp drive are reported to the OS already. Also modified the initialization of reply queues only in case of driver load time in the function _base_make_ioc_operational(). Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
David Vrabel authored
commit 7a7546b3 upstream. If NR_CPUS < 256 then arch_spinlock_t is only 16 bits wide but struct xen_spinlock is 32 bits. When a spin lock is contended and xl->spinners is modified the two bytes immediately after the spin lock would be corrupted. This is a regression caused by 84eb950d (x86, ticketlock: Clean up types and accessors) which reduced the size of arch_spinlock_t. Fix this by making xl->spinners a u8 if NR_CPUS < 256. A BUILD_BUG_ON() is also added to check the sizes of the two structures are compatible. In many cases this was not noticable as there would often be padding bytes after the lock (e.g., if any of CONFIG_GENERIC_LOCKBREAK, CONFIG_DEBUG_SPINLOCK, or CONFIG_DEBUG_LOCK_ALLOC were enabled). The bnx2 driver is affected. In struct bnx2, phy_lock and indirect_lock may have no padding after them. Contention on phy_lock would corrupt indirect_lock making it appear locked and the driver would deadlock. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Jeremy Fitzhardinge <jeremy@goop.org> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Eric W. Biederman authored
commit ce597919 upstream. Recently an OOPS was observed from the usb serial io_ti driver when it tried to remove sysfs directories. Upon investigation it turns out this driver was always buggy and that a recent sysfs change had stopped guarding itself against removing attributes from sysfs directories that had already been removed. :( Historically we have been silent about attempting to files from nonexistent sysfs directories and have politely returned error codes. That has resulted in people writing broken code that ignores the error codes. Issue a kernel WARNING and a stack backtrace to make it clear in no uncertain terms that abusing sysfs is not ok, and the callers need to fix their code. This change transforms the io_ti OOPS into a more comprehensible error message and stack backtrace. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Reported-by:
Wolfgang Frisch <wfpub@roembden.net> Signed-off-by:
-
Will Deacon authored
commit 612539e8 upstream. On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Catalin Marinas <Catalin.Marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Srinidhi KASAGAR authored
commit d65015f7 upstream. This applies ARM errata 764369 for all ux500 platforms. Signed-off-by:
Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Nicolas Ferre authored
commit 3e90772f upstream. Currently setting it to PQFP changes subtype to BGA as subtypes are swapped in at91rm9200_set_type(). Wrong subtype causes GPIO bank D not to work at all. After this fix, subtype is still set as unknown. But board code should fill it in with proper value. Another information is thus printed. Bug discovery and first implementation made by Veli-Pekka Peltola. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Eric Anholt authored
commit 04115a9d upstream. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Keith Packard <keithp@keithp.com> Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Paulo Zanoni authored
commit ba68e086 upstream. This is a revert of 81a14b46. We already set the mode polarity using the SDVO commands with struct intel_sdvo_dtd. We have at least 3 bugs that get fixed with this patch. The documentation, despite not clear, can also be interpreted in a way that suggests this patch is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15766 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42174 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43333Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Daniel Vetter authored
commit 4cd53c0c upstream. Two things seem to do the trick on my ivb machine here: - prevent the gt from powering down while waiting for seqno notification interrupts by grabbing the force_wake in get_irq (and dropping it in put_irq again). - ordering writes from the ring's CS by reading a CS register, ACTHD seems to work. Only the blt&bsd ring on ivb seem to be massively affected by this, but for paranoia do this dance also on the render ring and on snb (i.e. all gpus with forcewake). Tested with Eric's glCopyPixels loop which without this patch scores a missed irq every few seconds. This patch needs my forcewake rework to use a spinlock instead of dev->struct_mutex. After crawling through docs a lot I've found the following nugget: Internal doc "SNB GT PM Programming Guide", Section 4.3.1: "GT does not generate interrupts while in RC6 (by design)" So it looks like rc6 and irq generation are indeed related. v2: Improve the comment per Eugeni Dodonov's suggestion. v3: Add the documentation snipped. Also restrict the w/a to ivb only for -fixes, as suggested by Keith Packard. Cc: Eric Anholt <eric@anholt.net> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Eugeni Dodonov <eugeni.dodonov@intel.com> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Takashi Iwai authored
commit b3a81520 upstream. The very same problem is seen on Haier W18 laptop with ALC861 as seen on ASUS A6Rp, which was fixed by the commit 3b25eb69. Now we just need to add a new SSID entry pointing to the same fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 3b25eb69 upstream. The refactoring of Realtek codec driver in 3.2 kernel caused a regression for ASUS A6Rp laptop; it doesn't give any output. The reason was that this machine has a secret master mute (or EAPD) control via NID 0x0f VREF. Setting VREF50 on this node makes the sound working again. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588Signed-off-by:
-
Gustavo Maciel Dias Vieira authored
commit a6a600d1 upstream. HP laptop models with buggy BIOS are apparently frequent, including machines with different codecs. Set the polarity of the mute led based on the SSID and include an entry for the HP Mini 110-3100. Signed-off-by:
Gustavo Maciel Dias Vieira <gustavo@sagui.org> Tested-by:
Predrag Ivanovic <predivan@open.telekom.rs> Signed-off-by:
-
Andreas Schwab authored
commit 2a353506 upstream. Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Andreas Herrmann authored
commit 5b68edc9 upstream. We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Russ Anderson authored
commit 5a51467b upstream. uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by:
Russ Anderson <rja@sgi.com> Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.comSigned-off-by:
-
Cliff Wickman authored
commit d2ebc71d upstream. Initialize two spinlocks in tlb_uv.c and also properly define/initialize the uv_irq_lock. The lack of explicit initialization seems to be functionally harmless, but it is diagnosed when these are turned on: CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y Signed-off-by:
Cliff Wickman <cpw@sgi.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com [ Added the uv_irq_lock initialization fix by Dimitri Sivanich ] Signed-off-by:
-
Stefan Berger authored
commit a927b813 upstream. This patch adds a delay after aborting a command. Some TPMs need this and will not process the subsequent command correctly otherwise. It's worth noting that a TPM randomly failing to process a command, maps to randomly failing suspend/resume operations. Signed-off-by:
Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by:
Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
commit 51fc6dc8 upstream. For rounds 16--79, W[i] only depends on W[i - 2], W[i - 7], W[i - 15] and W[i - 16]. Consequently, keeping all W[80] array on stack is unnecessary, only 16 values are really needed. Using W[16] instead of W[80] greatly reduces stack usage (~750 bytes to ~340 bytes on x86_64). Line by line explanation: * BLEND_OP array is "circular" now, all indexes have to be modulo 16. Round number is positive, so remainder operation should be without surprises. * initial full message scheduling is trimmed to first 16 values which come from data block, the rest is calculated before it's needed. * original loop body is unrolled version of new SHA512_0_15 and SHA512_16_79 macros, unrolling was done to not do explicit variable renaming. Otherwise it's the very same code after preprocessing. See sha1_transform() code which does the same trick. Patch survives in-tree crypto test and original bugreport test (ping flood with hmac(sha512). See FIPS 180-2 for SHA-512 definition http://csrc.nist.gov/publications/fips/fips180-2/fips180-2withchangenotice.pdfSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alexey Dobriyan authored
commit 84e31fdb upstream. commit f9e2bca6 aka "crypto: sha512 - Move message schedule W[80] to static percpu area" created global message schedule area. If sha512_update will ever be entered twice, hash will be silently calculated incorrectly. Probably the easiest way to notice incorrect hashes being calculated is to run 2 ping floods over AH with hmac(sha512): #!/usr/sbin/setkey -f flush; spdflush; add IP1 IP2 ah 25 -A hmac-sha512 0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000025; add IP2 IP1 ah 52 -A hmac-sha512 0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000052; spdadd IP1 IP2 any -P out ipsec ah/transport//require; spdadd IP2 IP1 any -P in ipsec ah/transport//require; XfrmInStateProtoError will start ticking with -EBADMSG being returned from ah_input(). This never happens with, say, hmac(sha1). With patch applied (on BOTH sides), XfrmInStateProtoError does not tick with multiple bidirectional ping flood streams like it doesn't tick with SHA-1. After this patch sha512_transform() will start using ~750 bytes of stack on x86_64. This is OK for simple loads, for something more heavy, stack reduction will be done separatedly. Signed-off-by:
-
Jan Kara authored
commit 353b67d8 upstream. When we reach cleanup_journal_tail(), there is no guarantee that checkpointed buffers are on a stable storage - especially if buffers were written out by log_do_checkpoint(), they are likely to be only in disk's caches. Thus when we update journal superblock, effectively removing old transaction from journal, this write of superblock can get to stable storage before those checkpointed buffers which can result in filesystem corruption after a crash. A similar problem can happen if we replay the journal and wipe it before flushing disk's caches. Thus we must unconditionally issue a cache flush before we update journal superblock in these cases. The fix is slightly complicated by the fact that we have to get log tail before we issue cache flush but we can store it in the journal superblock only after the cache flush. Otherwise we risk races where new tail is written before appropriate cache flush is finished. I managed to reproduce the corruption using somewhat tweaked Chris Mason's barrier-test scheduler. Also this should fix occasional reports of 'Bit already freed' filesystem errors which are totally unreproducible but inspection of several fs images I've gathered over time points to a problem like this. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Johannes Berg authored
commit bc4934bc upstream. When deauth is requested while an auth or assoc work item is in progress, we currently delete it without regard for any state it might need to clean up. Fix it by cleaning up for those items. In the case Pontus found, the problem manifested itself as such: authenticate with 00:23:69:aa:dd:7b (try 1) authenticated failed to insert Dummy STA entry for the AP (error -17) deauthenticating from 00:23:69:aa:dd:7b by local choice (reason=2) It could also happen differently if the driver uses the tx_sync callback. We can't just call the ->done() method of the work items because that will lock up due to the locking in cfg80211. This fix isn't very clean, but that seems acceptable since I have patches pending to remove this code completely. Reported-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Tested-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit f96b08a7 upstream. This patch workaround live deadlock problem caused by infinite loop in brcms_c_wait_for_tx_completion(). I do not consider the patch as the proper fix, which should fix the real reason of tx queue flush failure, but patch helps with system lockup. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576Reported-and-tested-by:
Patrick <ragamuffin@datacomm.ch> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Mark Brown authored
commit a14304ed upstream. We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit 495174a8 upstream. These are all to either uncached registers or fixes to register defaults, in the former case the cache won't do anything and in the latter case we're fixing things so the cache sync will do the right thing. Signed-off-by:
-
Mark Brown authored
commit fed22007 upstream. With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by:
-
Mark Brown authored
commit e53e4173 upstream. Writing to the registers won't work if we do actually manage to hit a fully powered off state. Signed-off-by:
-
Jan Kara authored
commit 9b025eb3 upstream. Commit b52a360b forgot to call xfs_iunlock() when it detected corrupted symplink and bailed out. Fix it by jumping to 'out' instead of doing return. CC: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Alex Elder <elder@kernel.org> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 598781d7 upstream. If the master tries to authenticate a client using drm_authmagic and that client has already closed its drm file descriptor, either wilfully or because it was terminated, the call to drm_authmagic will dereference a stale pointer into kmalloc'ed memory and corrupt it. Typically this results in a hard system hang. This patch fixes that problem by removing any authentication tokens (struct drm_magic_entry) open for a file descriptor when that file descriptor is closed. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 3a47824d upstream. dig transmitter control table only has ENABLE/DISABLE actions on DCE4.1/DCE5. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44955Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 386d4d75 upstream. Needs to happen earlier in the mode set. Signed-off-by:
-
Alex Deucher authored
commit 44517c44 upstream. Interrupts only work with MSIs. https://bugs.freedesktop.org/show_bug.cgi?id=37679Reported-by:
Dmitry Podgorny <pasis.uax@gmail.com> Signed-off-by:
-
Tyler Hicks authored
commit 58ded24f upstream. If pages passed to the eCryptfs extent-based crypto functions are not mapped and the module parameter ecryptfs_verbosity=1 was specified at loading time, a NULL pointer dereference will occur. Note that this wouldn't happen on a production system, as you wouldn't pass ecryptfs_verbosity=1 on a production system. It leaks private information to the system logs and is for debugging only. The debugging info printed in these messages is no longer very useful and rather than doing a kmap() in these debugging paths, it will be better to simply remove the debugging paths completely. https://launchpad.net/bugs/913651Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Tyler Hicks authored
commit a261a039 upstream. Most filesystems call inode_change_ok() very early in ->setattr(), but eCryptfs didn't call it at all. It allowed the lower filesystem to make the call in its ->setattr() function. Then, eCryptfs would copy the appropriate inode attributes from the lower inode to the eCryptfs inode. This patch changes that and actually calls inode_change_ok() on the eCryptfs inode, fairly early in ecryptfs_setattr(). Ideally, the call would happen earlier in ecryptfs_setattr(), but there are some possible inode initialization steps that must happen first. Since the call was already being made on the lower inode, the change in functionality should be minimal, except for the case of a file extending truncate call. In that case, inode_newsize_ok() was never being called on the eCryptfs inode. Rather than inode_newsize_ok() catching maximum file size errors early on, eCryptfs would encrypt zeroed pages and write them to the lower filesystem until the lower filesystem's write path caught the error in generic_write_checks(). This patch introduces a new function, called ecryptfs_inode_newsize_ok(), which checks if the new lower file size is within the appropriate limits when the truncate operation will be growing the lower file. In summary this change prevents eCryptfs truncate operations (and the resulting page encryptions), which would exceed the lower filesystem limits or FSIZE rlimits, from ever starting. Signed-off-by:
Li Wang <liwang@nudt.edu.cn> Signed-off-by:
-
Tyler Hicks authored
commit 5e6f0d76 upstream. ecryptfs_write() handles the truncation of eCryptfs inodes. It grabs a page, zeroes out the appropriate portions, and then encrypts the page before writing it to the lower filesystem. It was unkillable and due to the lack of sparse file support could result in tying up a large portion of system resources, while encrypting pages of zeros, with no way for the truncate operation to be stopped from userspace. This patch adds the ability for ecryptfs_write() to detect a pending fatal signal and return as gracefully as possible. The intent is to leave the lower file in a useable state, while still allowing a user to break out of the encryption loop. If a pending fatal signal is detected, the eCryptfs inode size is updated to reflect the modified inode size and then -EINTR is returned. Signed-off-by:
-
Tim Gardner authored
commit 30373dc0 upstream. Print inode on metadata read failure. The only real way of dealing with metadata read failures is to delete the underlying file system file. Having the inode allows one to 'find . -inum INODE`. [tyhicks@canonical.com: Removed some minor not-for-stable parts] Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Tyler Hicks authored
commit db10e556 upstream. A malicious count value specified when writing to /dev/ecryptfs may result in a a very large kernel memory allocation. This patch peeks at the specified packet payload size, adds that to the size of the packet headers and compares the result with the write count value. The resulting maximum memory allocation size is approximately 532 bytes. Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit b4ead019 upstream. The recent change of the power-widget handling for IDT codecs caused the silent output from the docking-station line-out jack. This was partially fixed by the commit f2cbba76 "ALSA: hda - Fix the lost power-setup of seconary pins after PM resume". But the line-out on the docking-station is still silent when booted with the jack plugged even by this fix. The remainig bug is that the power-widget is set off in stac92xx_init() because the pins in cfg->line_out_pins[] aren't checked there properly but only hp_pins[] are checked in is_nid_hp_pin(). This patch fixes the problem by checking both HP and line-out pins and leaving the power-map correctly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637Signed-off-by:
-
Takashi Iwai authored
commit 52409aa6 upstream. The commit 2ae66c26 ALSA: hda: option to enable arbitrary buffer/period sizes introduced a regression on machines with Intel controller and Nvidia HDMI. The reason is that the driver modifies the global variable align_buffer_size when an Intel controller is found, and the Nvidia HDMI controller is probed after Intel although Nvidia chips require the aligned buffers. This patch fixes the problem by moving the flag into the local struct so that it's not affected by other controllers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567Signed-off-by:
-
- 26 Jan, 2012 1 commit
-
-
Greg Kroah-Hartman authored
-
