- 14 Oct, 2015 8 commits
-
-
Carolyn Wyborny authored
This patch adds a member to the nvm_info struct for oem_ver info to be output either by OID or ethtool. Change-ID: I1e5d513ae67622e2af17042924fdb4b5d6d85366 Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The driver was not correctly handling calls to its ndo_set_mac_address method. It did not properly check to see if the override would be allowed by the PF driver, and never removed the old address from its filter list. Add a new flag to the adapter struct which is set if the MAC address is assigned by the PF. Check this flag and don't allow the MAC address to be changed if it is set. Search for and properly remove the filter for the old MAC address when the new one is set. Change-ID: I817bf620c869c5a80e6a7eab65c9cbad1dc89799 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Neerav Parikh authored
Replace one left over (1 << up) in the i40e_dcb.c file with the BIT() macro. Change-ID: I39492a400a2cee5ac566143a5b436cc478bea0db Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Carolyn Wyborny authored
Flag the filter_mask parameter as __always_unused in the ndo_bridge_getlink function. Change-ID: Ifc1e99c7fb84bcbf81cf7b0ac891ad8ca956ffb2 Signed-off-by:
-
Shannon Nelson authored
Add the new Port link status bit and rename the link status to function link status. Change-ID: I71289327ae62638ce967b6ad40114caf998b6dab Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
David Ahern authored
Add ip commands with examples for creating VRF devics, enslaving interfaces and dumping VRF-focused data (address, neighbors, routes). Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
Use kstrdup instead of strlen-kmalloc-strcpy. Remove unneeded NULL test, it will be tested inside kstrdup. Remove 0 length string test, it has been tested in the caller of dsp_pipeline_build. Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Eric Dumazet authored
When a TCP/DCCP listener is closed, its pending SYN_RECV request sockets become stale, meaning 3WHS can not complete. But current behavior is wrong : incoming packets finding such stale sockets are dropped. We need instead to cleanup the request socket and perform another lookup : - Incoming ACK will give a RST answer, - SYN rtx might find another listener if available. - We expedite cleanup of request sockets and old listener socket. Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 13 Oct, 2015 32 commits
-
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: vlan: cleanups & fixes (part 3) Patch 01 converts the vlgrp member to use rcu as it was already used in a similar way so better to make it official and use all the available RCU instrumentation. Patch 02 fixes a bug where the vlan_list can be traversed without rtnl or rcu held which could lead to using freed entries. Patch 03 removes some redundant code that isn't needed anymore. Patch 04 fixes a bug reported by Ido Schimmel about the vlan_flush order and switchdevs, it moves it back. v2: patch 03 and 04 are new, couldn't escape the second synchronize_rcu() since the rhtable destruction can sleep ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Ido Schimmel reported a problem with switchdev devices because of the order change of del_nbp operations, more specifically the move of nbp_vlan_flush() which deletes all vlans and frees vlgrp after the rx_handler has been unregistered. So in order to fix this move vlan_flush back where it was and make it destroy the rhtable after NULLing vlgrp and waiting a grace period to make sure noone can see it. Reported-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by:
-
Nikolay Aleksandrov authored
As Ido Schimmel pointed out the vlan_vid_del() code in nbp_vlan_flush is unnecessary (and is actually a remnant of the old vlan code) so we can remove it. Signed-off-by:
-
Nikolay Aleksandrov authored
br_fill_ifinfo is called by br_ifinfo_notify which can be called from many contexts with different locks held, sometimes it relies upon bridge's spinlock only which is a problem for the vlan code, so use explicitly rcu for that to avoid problems. Signed-off-by:
-
Nikolay Aleksandrov authored
The bridge and port's vlgrp member is already used in RCU way, currently we rely on the fact that it cannot disappear while the port exists but that is error-prone and we might miss places with improper locking (either RCU or RTNL must be held to walk the vlan_list). So make it official and use RCU for vlgrp to catch offenders. Introduce proper vlgrp accessors and use them consistently throughout the code. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: VRF support in IPv6 stack Initial support for VRF in IPv6 stack. Makes IPv6 functionality on par with IPv4 -- ping, tcp client/server and udp client/server all work fine. tcpdump on vrf device and external tap (e.g., host side tap device) shows all packets with proper addresses. IPv6 does not need the source address operation like IPv4. Verified vti6 works properly in my setup as does use of an IPv6 address on the VRF device. v3 - re-based to top of net-next (updates per net namespace changes by Eric) - fixed dst_entry typecasts as requested by Dave - added flags to inet6_rtm_getroute (IPv6 version of deaa0a6a) v2 - fixed CONFIG_IPV6 dependency as questioned by Cong - if IPV6 is a module, kbuild ensures VRF is a module - if IPV6 is disabled IPV6 functionality is compiled out of VRF module - addressed comments from Nik over IRC - removed duplicate call to netif_is_l3_master in l3mdev_rt6_dst_by_oif - changed allocation flag from GFP_ATOMIC to GFP_KERNEL since it is init time - added free of rt6i_pcpu - check_ipv6_frame returns false only if packet is NDISC type ==================== Signed-off-by:
-
David Ahern authored
As with IPv4 support for VRFs added to IPv6 stack by replacing hardcoded table ids with possibly device specific ones and manipulating the oif in the flowi6. The flow flags are used to skip oif compare in nexthop lookups if the device is enslaved to a VRF via the L3 master device. Signed-off-by:
-
David Ahern authored
Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by:
-
David Ahern authored
Signed-off-by:
-
David Ahern authored
Add operations to retrieve cached IPv6 dst entry from l3mdev device and lookup IPv6 source address. Signed-off-by:
-
Nikolay Aleksandrov authored
commit c62987bb ("bridge: push bridge setting ageing_time down to switchdev") introduced a timer race condition because the gc_timer can get rearmed after it's supposedly stopped and flushed in br_dev_delete() leading to a use of freed memory. So take rtnl to sync with bridge destruction when setting ageing_timer. Here's the trace reproduced with these two commands running in parallel: while :; do echo 10000 > /sys/class/net/br0/bridge/ageing_timer; done; while :; do brctl addbr br0; ip l set br0 up; ip l set br0 down; brctl delbr br0; done; [ 300.000029] BUG: unable to handle kernel paging request at ffffffff811c59d3 [ 300.000263] IP: [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.000422] PGD 1a0f067 PUD 1a10063 PMD 10001e1 [ 300.000639] Oops: 0003 [#1] SMP [ 300.000793] Modules linked in: bridge stp llc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd snd_hda_codec_generic qxl drm_kms_helper psmouse pcspkr ttm snd_hda_intel 9pnet_virtio evdev serio_raw joydev snd_hda_codec 9pnet virtio_balloon drm snd_hwdep virtio_console snd_hda_core pvpanic snd_pcm i2c_piix4 snd_timer acpi_cpufreq parport_pc snd parport soundcore button processor i2c_core ipv6 autofs4 hid_generic usbhid hid ext4 crc16 mbcache jbd2 sg sr_mod cdrom ata_generic virtio_blk virtio_net e1000 ehci_pci uhci_hcd ehci_hcd usbcore usb_common floppy ata_piix libata virtio_pci virtio_ring virtio scsi_mod [ 300.004008] CPU: 1 PID: 1169 Comm: bash Not tainted 4.3.0-rc3+ #46 [ 300.004008] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 300.004008] task: ffff880035be2200 ti: ffff88003795c000 task.ti: ffff88003795c000 [ 300.004008] RIP: 0010:[<ffffffff810f168e>] [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.004008] RSP: 0018:ffff88003fd03e78 EFLAGS: 00010046 [ 300.004008] RAX: ffff88003fd0ef60 RBX: 840fc78949c08548 RCX: 00000001ffffffff [ 300.004008] RDX: 0000000000000000 RSI: ffffffff811c59d3 RDI: ffff88003fd0df00 [ 300.004008] RBP: ffff88003fd03e78 R08: 00000000ffffffff R09: 0000000000000000 [ 300.004008] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003fd0df00 [ 300.004008] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffff816032e0 [ 300.004008] FS: 00007fcbdd609700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 300.004008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.004008] CR2: ffffffff811c59d3 CR3: 0000000037879000 CR4: 00000000000406e0 [ 300.004008] Stack: [ 300.004008] ffff88003fd03ea8 ffffffff810f1775 ffff88003c8cb958 ffff88003fd0df00 [ 300.004008] 0000000000000000 0000000000000001 ffff88003fd03f18 ffffffff810f28c4 [ 300.004008] ffff88003fd0eb68 ffff88003fd0e968 ffff88003fd0e768 ffff88003fd0df68 [ 300.004008] Call Trace: [ 300.004008] <IRQ> [ 300.004008] [<ffffffff810f1775>] cascade+0x45/0x70 [ 300.004008] [<ffffffff810f28c4>] run_timer_softirq+0x2f4/0x340 [ 300.004008] [<ffffffff8107e380>] __do_softirq+0xd0/0x440 [ 300.004008] [<ffffffff8107e8a3>] irq_exit+0xb3/0xc0 [ 300.004008] [<ffffffff815c2032>] smp_apic_timer_interrupt+0x42/0x50 [ 300.004008] [<ffffffff815bfe37>] apic_timer_interrupt+0x87/0x90 [ 300.004008] <EOI> [ 300.004008] [<ffffffff811fb80c>] ? create_object+0x13c/0x2e0 [ 300.004008] [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70 [ 300.004008] [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70 [ 300.004008] [<ffffffff8101e17f>] print_context_stack+0x7f/0xf0 [ 300.004008] [<ffffffff8101d55b>] dump_trace+0x11b/0x300 [ 300.004008] [<ffffffff8102970b>] save_stack_trace+0x2b/0x50 [ 300.004008] [<ffffffff811fb80c>] create_object+0x13c/0x2e0 [ 300.004008] [<ffffffff815b2e8e>] kmemleak_alloc+0x4e/0xb0 [ 300.004008] [<ffffffff811e475d>] kmem_cache_alloc_trace+0x18d/0x2f0 [ 300.004008] [<ffffffff8128b139>] kernfs_fop_open+0xc9/0x380 [ 300.004008] [<ffffffff8120214f>] do_dentry_open+0x1ff/0x2f0 [ 300.004008] [<ffffffff8128b070>] ? kernfs_fop_release+0x70/0x70 [ 300.004008] [<ffffffff812034f9>] vfs_open+0x59/0x60 [ 300.004008] [<ffffffff812130de>] path_openat+0x1ce/0x1260 [ 300.004008] [<ffffffff812154ae>] do_filp_open+0x7e/0xe0 [ 300.004008] [<ffffffff812251ff>] ? __alloc_fd+0xaf/0x180 [ 300.004008] [<ffffffff8120387b>] do_sys_open+0x12b/0x210 [ 300.004008] [<ffffffff8120397e>] SyS_open+0x1e/0x20 [ 300.004008] [<ffffffff815bf0b6>] entry_SYSCALL_64_fastpath+0x16/0x7a [ 300.004008] Code: 66 90 48 8b 46 10 48 8b 4f 40 55 48 89 c2 48 89 e5 48 29 ca 48 81 fa ff 00 00 00 77 20 0f b6 c0 48 8d 44 c7 68 48 8b 10 48 85 d2 <48> 89 16 74 04 48 89 72 08 48 89 30 48 89 46 08 5d c3 48 81 fa [ 300.004008] RIP [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.004008] RSP <ffff88003fd03e78> [ 300.004008] CR2: ffffffff811c59d3 Fixes: c62987bb ("bridge: push bridge setting ageing_time down to switchdev") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges. Signed-off-by:
Elad Raz <eladr@mellanox.com> Acked-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: fix hardware bridging DSA and its drivers currently hook the NETDEV_CHANGEUPPER net_device event in order to configure the VLAN map of every port. This VLAN map is a feature of these switch chips to hardcode and restrict which output ports a given input port can egress frames to. A Linux bridge is a simple untagged VLAN propagated by the bridge code itself. With a proper 802.1Q support, a driver does not need this hook anymore, and will simply program the related VLAN object. This patchset improves the hardware bridging code in the mv88e6xxx driver with a strict 802.1Q mode. Ideally, the equivalent must be done for Broadcom Starfighter 2 and Rocker, before completely getting rid of this hook. ==================== Signed-off-by: -
Vivien Didelot authored
Playing with the VLAN map of every port to implement "hardware bridging" in the 88E6352 driver was a hack until full 802.1Q was supported. Indeed with 802.1Q port mode "Disabled" or "Fallback", this feature is used to restrict which output ports an input port can egress frames to. A Linux bridge is an untagged VLAN. With full 802.1Q support, we don't need this hack anymore and can use the "Secure" strict 802.1Q port mode. With this mode, the port-based VLAN map still needs to be configured, but all the logic is VTU-centric. This means that the switch only cares about rules described in its hardware VLAN table, which is exactly what Linux bridge expects and what we want. Note also that the hardware bridging was broken with the previous flexible "Fallback" 802.1Q port mode. Here's an example: Port0 and Port1 belong to the same bridge. If Port0 sends crafted tagged frames with VID 200 to Port1, Port1 receives it. Even if Port1 is in hardware VLAN 200, but not Port0, Port1 will still receive it, because Fallback mode doesn't care about invalid VID or non-member source port. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
A DSA driver may not provide the port_join_bridge and port_leave_bridge functions, so don't warn in such case. Signed-off-by:
-
Vivien Didelot authored
Since we configure a switch chip through a Linux bridge, and a bridge is implemented as a VLAN, there is no need for per-port FID anymore. This patch gets rid of this and simplifies the driver code since we can now directly map all 4095 FIDs available to all VLANs. Signed-off-by:
-
Vivien Didelot authored
With 88E6352 and similar switch chips, each port has a map to restrict which output port this input port can egress frames to. The current driver code implements hardware bridging using this feature, and assigns to a bridge group the FID of its first member. Now that 802.1Q is fully implemented in this driver, a Linux bridge which is a simple untagged VLAN, already gets its own FID. This patch gets rid of the per-bridge FID and explicits the usage of the port based VLAN map feature. Signed-off-by:
-
Sowmini Varadhan authored
Consider the following "duelling syn" sequence between two peers A and B: A B SYN1 --> <-- SYN2 SYN2ACK --> Note that the SYN/ACK has already been sent out by TCP before rds_tcp_accept_one() gets invoked as part of callbacks. If the inet_addr(A) is numerically less than inet_addr(B), the arbitration scheme in rds_tcp_accept_one() will prefer the TCP connection triggered by SYN1, and will send a CLOSE for the SYN2 (just after the SYN2ACK was sent). Since B also follows the same arbitration scheme, it will send the SYN-ACK for SYN1 that will set up a healthy ESTABLISHED connection on both sides. B will also get a CLOSE for SYN2, which should result in the cleanup of the TCP state machine for SYN2, but it should not trigger any stale RDS-TCP callbacks (such as ->writespace, ->state_change etc), that would disrupt the progress of the SYN2 based RDS-TCP connection. Thus the arbitration scheme in rds_tcp_accept_one() should restore rds_tcp callbacks for the winner before setting them up for the new accept socket, and also make sure that conn->c_outgoing is set to 0 so that we do not trigger any reconnect attempts on the passive side of the tcp socket in the future, in conformance with commit c82ac7e6 ("net/rds: RDS-TCP: only initiate reconnect attempt on outgoing TCP socket.") Signed-off-by:Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
The IP address passed to rds_bind() should be vetted by the transport's ->laddr_check() for a previously bound transport. This needs to be done to avoid cases where, for example, the application has asked for an IB transport, but the IP address passed to bind is only usable on ethernet interfaces. Signed-off-by:
-
Julia Lawall authored
The only instance of a qlcnic_mbx_ops structure is never modified. Thus the declaration of the structure and all references to the structure type can be made const. In the definition of the qlcnic_mailbox structure, the ops field is no longer lined up with the other fields. This was left as is, to avoid a lot of trivial changes on the other lines. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Currently it's possible for someone to send a vlan range to the kernel with the pvid flag set which will result in the pvid bouncing from a vlan to vlan and isn't correct, it also introduces problems for hardware where it doesn't make sense having more than 1 pvid. iproute2 already enforces this, so let's enforce it on kernel-side as well. Reported-by:
-
Tillmann Heidsieck authored
Fix a smatch warning: drivers/atm/iphase.c:1178 rx_pkt() warn: curly braces intended? The code is correct, the indention is misleading. In case the allocation of skb fails, we want to skip to the end. Signed-off-by:
Tillmann Heidsieck <theidsieck@leenox.de> Signed-off-by:
-
Tillmann Heidsieck authored
Smatch complains about returning hard coded error codes, silence this warning. drivers/atm/iphase.c:115 ia_enque_rtn_q() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by:
-
Roopa Prabhu authored
This patch makes ip6_route_info_create return err pointer instead of returning the rt pointer by reference as suggested by Dave Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
huangdaode authored
This patch fix the building error reported by Jiri Pirko <jiri@resnulli.us> drivers/net/ethernet/hisilicon/hns/hnae.h:465:2: error: unknown type name 'phy_interface_t' phy_interface_t phy_if; ^ the full build log is on https://lists.01.org/pipermail/kbuild-all. Signed-off-by:huangdaode <huangdaode@hisilicon.com> Signed-off-by:
yankejian <yankejian@huawei.com> Reviewed-by:
-
Eric Dumazet authored
timewait or request sockets are small and do not contain sk->sk_tsflags Without this fix, we might read garbage, and crash later in __skb_complete_tx_timestamp() -> sock_queue_err_skb() (These pseudo sockets do not have an error queue either) Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
David S. Miller authored
Eric W. Biederman says: ==================== net: Pass net into defragmentation This is the next installment of my work to pass struct net through the output path so the code does not need to guess how to figure out which network namespace it is in, and ultimately routes can have output devices in another network namespace. In netfilter and af_packet we defragment packets in the output path, and there is the usual amount of confusion about how to compute which net we are processing the packets in. This patchset clears that confusion up by explicitly passing in struct net in ip_defrag, ip_check_defrag, and nf_ct_frag6_gather. ==================== Signed-off-by: -
Eric W. Biederman authored
The function nf_ct_frag6_gather is called on both the input and the output paths of the networking stack. In particular ipv6_defrag which calls nf_ct_frag6_gather is called from both the the PRE_ROUTING chain on input and the LOCAL_OUT chain on output. The addition of a net parameter makes it explicit which network namespace the packets are being reassembled in, and removes the need for nf_ct_frag6_gather to guess. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric W. Biederman authored
The function ip_defrag is called on both the input and the output paths of the networking stack. In particular conntrack when it is tracking outbound packets from the local machine calls ip_defrag. So add a struct net parameter and stop making ip_defrag guess which network namespace it needs to defragment packets in. Signed-off-by:
-
Eric W. Biederman authored
ip_call_ra_chain is called early in the forwarding chain from ip_forward and ip_mr_input, which makes skb->dev the correct expression to get the input network device and dev_net(skb->dev) a correct expression for the network namespace the packet is being processed in. Compute the network namespace and store it in a variable to make the code clearer. Signed-off-by:
-
Eric Dumazet authored
Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d0 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: iwlwifi * some debugfs improvements * fix signedness in beacon statistics * deinline some functions to reduce size when device tracing is enabled * filter beacons out in AP mode when no stations are associated * deprecate firmwares version -12 * fix a runtime PM vs. legacy suspend race * one-liner fix for a ToF bug * clean-ups in the rx code * small debugging improvement * fix WoWLAN with new firmware versions * more clean-ups towards multiple RX queues; * some rate scaling fixes and improvements; * some time-of-flight fixes; * other generic improvements and clean-ups; brcmfmac * rework code dealing with multiple interfaces * allow logging firmware console using debug level * support for BCM4350, BCM4365, and BCM4366 PCIE devices * fixed for legacy P2P and P2P device handling * correct set and get tx-power ath9k * add support for Outside Context of a BSS (OCB) mode mwifiex * add USB multichannel feature ==================== Signed-off-by:
-
