- 09 May, 2011 40 commits
-
-
Steven Rostedt authored
commit 60d526f7 upstream. When using gdb to debug perf, it is practically impossible to use when perf is compiled with -O6. For developers, this patch adds the DEBUG feature to the make command line so that a developer can easily remove the optimization flag. LKML-Reference: <1255590330.8392.446.camel@twins> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091020232033.984323261@goodmis.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> [bwh: Backport to 2.6.32] Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Randy Dunlap authored
commit 1abc7f55 upstream. Check for libelf headers and glibc headers separately so that the error message correctly identifies which package installation is missing/needed. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: paulus@samba.org Cc: a.p.zijlstra@chello.nl Cc: efault@gmx.de Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <4ADBCCE8.3060300@oracle.com> Signed-off-by:
-
Edgar (gimli) Hucek authored
commit 3e3ede7d upstream. Adding the new MacBookAir3,1(2) to btusb. Output without the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Output with the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Edgar (gimli) Hucek <gimli@dark-green.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Nobuhiro Iwamatsu authored
commit 3cd01976 upstream. Bluetooth controller of MacbookPro 7,1 does not work. Because Device Class of these controllers was set 255 (Vendor Sepecific Class). T: Bus=04 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8213 Rev=01.86 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=5C5948C81B99 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by:
-
Nobuhiro Iwamatsu authored
commit 9c047157 upstream. Bluetooth controller of MacbookPro 6,2 does not work. Because Device Class of these controllers was set 255 (Vendor Sepecific Class). T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=03 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8218 Rev=00.22 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
-
Pavel Roskin authored
commit b59a52f1 upstream. Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Gertjan van Wingerde authored
commit 7a4a77b7 upstream. Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
Gertjan van Wingerde authored
commit e6218cc4 upstream. Set the value of extra_tx_headroom in a central place, rather than in each of the drivers. This is preparatory for taking alignment space into account in the TX headroom requested by rt2x00. Signed-off-by:
-
Gertjan van Wingerde authored
commit d24deb25 upstream. Add a definition of the amount of TX headroom reserved by mac80211 itself for its own purposes. Also add BUILD_BUG_ON to validate the value. This define can then be used by drivers to request additional TX headroom in the most efficient manner. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Rusty Russell authored
commit 58eba97d upstream. virtio net will never try to overflow the TX ring, so the only reason add_buf may fail is out of memory. Thus, we can not stop the device until some request completes - there's no guarantee anything at all is outstanding. Make the error message clearer as well: error here does not indicate queue full. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bruce Rogers authored
commit 3e9d08ec upstream. Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by:
Bruce Rogers <brogers@novell.com> Signed-off-by:
Olaf Kirch <okir@suse.de> Signed-off-by:
-
Edgar (gimli) Hucek authored
commit 87232dd4 upstream. This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the alsa sound system. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f46119b7 upstream. Reference: Novell bnc#645066 https://bugzilla.novell.com/show_bug.cgi?id=645066Signed-off-by:
-
Vince Weaver authored
commit 4e7d7c60 upstream. I've found the following patch is necessary to enable line-in on my MacBookPro 5,3 machine. With the patch applied I've successfully recorded audio from the line-in jack. This is based on the existing 5,5 support. Signed-off-by:
Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by:
-
Rafael Avila de Espindola authored
commit 1a5ba2e9 upstream. With the attached patch I am able to use the sound on a new IMac 27. What works: *) Internal speakers *) Internal microphone *) Headphone I don't have an external mic or a SPDIF device to test the rest. Signed-off-by:
Rafael Avila de Espindola <rafael.espindola@gmail.com> Signed-off-by:
-
Risto Suominen authored
commit b6d73350 upstream. Lineout (Pro Speaker) detection on PowerMac G4 Digital Audio (Tumbler). Signed-off-by:
Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by:
-
Risto Suominen authored
commit 819ef70b upstream. Reverse headphone detection bit on PowerMac G4 Digital Audio (Tumbler). Signed-off-by:
-
Ben Hutchings authored
commit a254dba3 upstream. Reported-by:
Carmen Cru <carmen.cru@belgacom.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Edgar Hucek authored
commit 132af032 upstream. This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the applesmc driver. [rydberg@euromail.se: minor cleanup] Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Henrik Rydberg authored
commit 405eaa1c upstream. This patch adds generic support for the MacBook Pro 7 family based on the 7,1 model. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Bernhard Froemel authored
commit 872bad55 upstream. This patch adds generic support for the MacBook Pro 6 family based on the 6,2 model. [rydberg@euromail.se: patch cleanup] Signed-off-by:
Bernhard Froemel <froemel@vmars.tuwien.ac.at> Signed-off-by:
-
Henrik Rydberg authored
commit 4e4a99d3 upstream. The MacBookPro 5,3 model has two fans, whereas the 5,4 model has only one. This patch adds explicit support for the 5,3 and 5,4 models. Signed-off-by:
-
Justin P. Mattock authored
commit e1741712 upstream. Add the iMac9,1 and the MacBookPro2,2 temperature sensors to hwmon driver applesmc to fix kernel bug #14429: https://bugzilla.kernel.org/show_bug.cgi?id=14429Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Acked-by:
Nicolas Boichat <nicolas@boichat.ch> Signed-off-by:
-
Ron Murray authored
commit 60abe782 upstream. Please add support for Microsoft MN-120 PCMCIA network card. It's an old card, I know, but adding support is very easy. You just need to get tulip_core.c to recognise its vendor/device ID. Patch for kernel 2.6.32.4 (and many previous) attached. .....Ron Murray Signed-off-by:
Ron Murray <rjmx@rjmx.net> Signed-off-by:
-
Linus Torvalds authored
commit 34d211a2 upstream. It turns out that while a maximum of 8 partitions may be what people "should" have had, you can actually fit up to 18 entries(*) in a sector. And some people clearly were taking advantage of that, like Michael Cree, who had ten partitions on one of his OSF disks. (*) The OSF partition data starts at byte offset 64 in the first sector, and the array of 16-byte partition entries start at offset 148 in the on-disk partition structure. Reported-by:
Michael Cree <mcree@orcon.net.nz> Cc: stable@kernel.org (v2.6.38) Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Timo Warns authored
commit 1eafbfeb upstream. The kernel automatically evaluates partition tables of storage devices. The code for evaluating OSF partitions contains a bug that leaks data from kernel heap memory to userspace for certain corrupted OSF partitions. In more detail: for (i = 0 ; i < le16_to_cpu(label->d_npartitions); i++, partition++) { iterates from 0 to d_npartitions - 1, where d_npartitions is read from the partition table without validation and partition is a pointer to an array of at most 8 d_partitions. Add the proper and obvious validation. Signed-off-by:
Timo Warns <warns@pre-sense.de> Cc: stable@kernel.org [ Changed the patch trivially to not repeat the whole le16_to_cpu() thing, and to use an explicit constant for the magic value '8' ] Signed-off-by:
-
Jovi Zhang authored
commit 43b7c3f0 upstream. this commit fix compilation warning as following: linux-2.6/fs/nfs/nfs4proc.c:3265: warning: comparison of distinct pointer types lacks a cast Signed-off-by:
Jovi Zhang <bookjovi@gmail.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Neil Horman authored
commit e9e3d724 upstream. The "bad_page()" page allocator sanity check was reported recently (call chain as follows): bad_page+0x69/0x91 free_hot_cold_page+0x81/0x144 skb_release_data+0x5f/0x98 __kfree_skb+0x11/0x1a tcp_ack+0x6a3/0x1868 tcp_rcv_established+0x7a6/0x8b9 tcp_v4_do_rcv+0x2a/0x2fa tcp_v4_rcv+0x9a2/0x9f6 do_timer+0x2df/0x52c ip_local_deliver+0x19d/0x263 ip_rcv+0x539/0x57c netif_receive_skb+0x470/0x49f :virtio_net:virtnet_poll+0x46b/0x5c5 net_rx_action+0xac/0x1b3 __do_softirq+0x89/0x133 call_softirq+0x1c/0x28 do_softirq+0x2c/0x7d do_IRQ+0xec/0xf5 default_idle+0x0/0x50 ret_from_intr+0x0/0xa default_idle+0x29/0x50 cpu_idle+0x95/0xb8 start_kernel+0x220/0x225 _sinittext+0x22f/0x236 It occurs because an skb with a fraglist was freed from the tcp retransmit queue when it was acked, but a page on that fraglist had PG_Slab set (indicating it was allocated from the Slab allocator (which means the free path above can't safely free it via put_page. We tracked this back to an nfsv4 setacl operation, in which the nfs code attempted to fill convert the passed in buffer to an array of pages in __nfs4_proc_set_acl, which gets used by the skb->frags list in xs_sendpages. __nfs4_proc_set_acl just converts each page in the buffer to a page struct via virt_to_page, but the vfs allocates the buffer via kmalloc, meaning the PG_slab bit is set. We can't create a buffer with kmalloc and free it later in the tcp ack path with put_page, so we need to either: 1) ensure that when we create the list of pages, no page struct has PG_Slab set or 2) not use a page list to send this data Given that these buffers can be multiple pages and arbitrarily sized, I think (1) is the right way to go. I've written the below patch to allocate a page from the buddy allocator directly and copy the data over to it. This ensures that we have a put_page free-able page for every entry that winds up on an skb frag list, so it can be safely freed when the frame is acked. We do a put page on each entry after the rpc_call_sync call so as to drop our own reference count to the page, leaving only the ref count taken by tcp_sendpages. This way the data will be properly freed when the ack comes in Successfully tested by myself to solve the above oops. Note, as this is the result of a setacl operation that exceeded a page of data, I think this amounts to a local DOS triggerable by an uprivlidged user, so I'm CCing security on this as well. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Trond Myklebust <Trond.Myklebust@netapp.com> CC: security@kernel.org CC: Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Andy Chittenden authored
commit 669502ff upstream. When reusing a TCP connection, ensure that it's aborted if a previous shutdown attempt has been made on that connection so that the RPC over TCP recovery mechanism succeeds. Signed-off-by:
Andy Chittenden <andyc.bluearc@gmail.com> Signed-off-by:
-
Abhijith Das authored
commit 8b421601 upstream. HighMem pages on i686 do not get mapped to the buffer_heads and this was causing a NULL pointer dereference when we were trying to memset page buffers to zero. We now use zero_user() that kmaps the page and directly manipulates page data. This patch also fixes a boundary condition that was incorrect. Signed-off-by:
Abhi Das <adas@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> [Adjusted to apply to 2.6.32 by dann frazier <dannf@debian.org>] Signed-off-by:
-
Abhijith Das authored
commit 7e619bc3 upstream. This is the upstream fix for this bug. This patch differs from the RHEL5 fix (Red Hat bz #555754) which simply writes to the 8-byte value field of the quota. In upstream quota code, we're required to write the entire quota (88 bytes) which can be split across a page boundary. We check for such quotas, and read/write the two parts from/to the corresponding pages holding these parts. With this patch, I don't see the bug anymore using the reproducer in Red Hat bz 555754. I successfully ran a couple of simple tests/mounts/ umounts and it doesn't seem like this patch breaks anything else. Signed-off-by:
-
Steven Whitehouse authored
commit 1e72c0f7 upstream. Both of these functions contained confusing and in one case duplicate code. This patch adds a new check in do_glock() so that we report -ENOENT if we are asked to sync a quota entry which doesn't exist. Due to the previous patch this is now reported correctly to userspace. Also there are a few new comments, and I hope that the code is easier to understand now. Signed-off-by:
-
Alan Stern authored
commit 834e2312 upstream. USB: teach "devices" file about Wireless and SuperSpeed USB The /sys/kernel/debug/usb/devices file doesn't know about Wireless or SuperSpeed USB. This patch (as1416b) teaches it, and updates the Documentation/usb/proc_sub_info.txt file accordingly. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: David Vrabel <david.vrabel@csr.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Alan Stern authored
commit 7aba8d01 upstream. This patch (as1364) avoids enabling remote wakeup by default on all non-root-hub USB devices. Individual drivers or userspace will have to enable it wherever it is needed, such as for keyboards or network interfaces. Note: This affects only system sleep, not autosuspend. External hubs will continue to relay wakeup requests received from downstream through their upstream port, even when remote wakeup is not enabled for the hub itself. Disabling remote wakeup on a hub merely prevents it from generating wakeup requests in response to connect, disconnect, and overcurrent events. Signed-off-by:
-
Dan Streetman authored
commit 16985408 upstream. Currently a non-root-hub USB device's wakeup settings are initialized when the device is set to a configured state using device_init_wakeup(), but this is not correct as wakeup is split into "capable" (can_wakeup) and "enabled" (should_wakeup). The settings should be initialized instead in the device initialization (usb_new_device) with the "capable" setting disabled and the "enabled" setting enabled. The "capable" setting should be set based on the device being configured or unconfigured, and "enabled" setting set based on the sysfs power/wakeup control. This patch retains the sysfs power/wakeup setting of a non-root-hub USB device over a USB device re-configuration, which can happen (for example) after a suspend/resume cycle. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Florian Schilhabel authored
commit 15d93ed0 upstream. This patch adds some device ids. The list of supported devices was extracted from realteks driver package. (0x050d, 0x815F) and (0x0df6, 0x004b) are not in the official list of supported devices and may not work correctly. In case of problems with these, they should probably be removed from the list. Signed-off-by:
Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by:
-
Florian Schilhabel authored
commit 60b42de3 upstream. This patch removes some device-ids. The list of unsupported devices was extracted from realteks driver package. removed IDs are: (0x0bda, 0x8192) (0x0bda, 0x8709) (0x07aa, 0x0043) (0x050d, 0x805E) (0x0df6, 0x0031) (0x1740, 0x9201) (0x2001, 0x3301) (0x5a57, 0x0290) These devices are _not_ rtl819su based. Signed-off-by:
-
Ben Hutchings authored
commit 41a38d9e upstream. The current code creates directories in procfs named after interfaces, but doesn't handle renaming. This can result in name collisions and consequent WARNINGs. It also means that the interface name cannot reliably be used to remove the directory - in fact the current code doesn't even try, and always uses "wlan0"! Since the name of a proc_dir_entry is embedded in it, use that when removing it. Add a netdev notifier to catch interface renaming, and remove and re-add the directory at this point. Signed-off-by:
-
Ben Hutchings authored
commit 9a3dfa05 upstream. Currently various resources may be leaked in case of an error. Signed-off-by:
-
Florian Schilhabel authored
commit 199ef62a upstream. added 2 checks for skb == NULL. plus cosmetics Signed-off-by:
-
