This patch removes all the defines in sysdef.h that are not used at all.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix goto error logic which could lead to kernel panics
because kthread_stop() is called in not correct error
conditions. Seen it sometimes when dsp_reload() fails
then I got kernel panic.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove exec_mknod() and rm_mknod() helpers which was used for
device nodes creating/removing in kernel space.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fix keucr init.c other coding style but not from checkpatch.pl.
replace ternary conditional "?:" with if/else.
Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fix keucr init.c init.h coding style.
only fix coding style check by checkpatch.pl.
Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Driver init() function should return error code.
Also fix tvenc_clk leak.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SND_INTELMID selects 3 SND_* kconfig symbols, but that is useless
if the SOUND & SND symbols in their hierarchy are not enabled,
so make this symbol depend on SOUND & SND.

ERROR: "snd_pcm_period_elapsed" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_card_create" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_hw_constraint_integer" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_device_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_set_ops" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_jack_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_free_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_ctl_new1" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_card_free" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_card_register" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_jack_report" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_ctl_add" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

BUSTYPE isn't used in this configuration.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The variable dhd_ops_virt was used before although its use was rather
limited as can be found in previous commit:

| commit 4fd68ae1
| Author: Julia Lawall <julia@diku.dk>
| Date:   Tue Oct 26 12:25:33 2010 +0200
|
|    drivers/staging/brcm80211/brcmfmac/dhd_linux.c: delete double assignment
|
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

macros PKTHEADROOM and PKTTAILROOM have been replaced by native
skbuff functions and macros PKTALLOCED and PKTUNALLOC have been
removed.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

With the packet storage type changed from void pointer to struct sk_buff
pointer there is no need for macros for accessing these fields through
casting. These can now be accessed directly.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The packet queues now store struct sk_buff pointer and subsequently
all driver code handling packets now use struct sk_buff as package
storage type. Next step will be getting rid of packet macros.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The prototype for function pktsegcnt in bmcutils.h is not defined
nor used anywhere in the driver so it can be removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Source wl_iw.c uses semaphore definitions and as such should include
<linux/semaphore.h>.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Replace OSL layer PCI READ/WRITE macros with native calls.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Kconfig file should not have 'y' as the default, especially
as the driver will crash a machine if it is loaded and the hardware
is not present.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Allyn <mark.a.allyn@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Kconfig file should not have 'y' as the default, especially
as the driver will crash a machine if it is loaded and the hardware
is not present.

Cc: Mark Allyn <mark.a.allyn@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The existing code works mostly by luck. The PCI probe is done by the
register and completes before the register returns thus allowing the other
init code to run in time. Without a SEP or if unlucky this doesn't occur
and you get an OOPS which for some reason causes grumpiness.

As the season of good b^Hcheer is supposed to be approaching we should
probably fix it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Another copy_user case and some formatting of dbg
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

So use can't instead.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SEP is initials so make it consistent in the driver, ditto DMA and DCB
Consistent capitalisation of comment leads
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Various assignments are done but not used
dev_dbg formatting is a bit weird and wraps when not needed
Take out some of the blank lines and reformat a bit to reduce view size
Remove some comments that are obvious
Fix else formatting
Remove some user triggerable dev_warns
Fix copy_from_user error return cases (-EFAULT not bytes copied)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The long blurb goes at the end
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is called on a kmalloc/memset object. Remove everything that isn't a
set to zero

Oh look 8)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Kill unused stuff
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SEP isn't the only driver that may need to handle both cases easily
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds two new ioctls to intel_sst_ctrl device.
This i/f can be used by application to send algorithm parameters
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
[This will need further discussion in the context of the final ALSA interface
 but is fine for staging, ie anyone who relies on it should expect changes
 Also fixed a missing kmalloc fail check]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The firmware name for each platform is appended by PCI id of device.
This patch makes use of pci id to construct the string rather than
hardcode the string.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds runtime PM support for audio driver.
This also fixes LPA audio mode for moorestown platform
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

linux/etherdevice.h already provides functions to classify different
ethernet addresses. These inlineable functions should be used instead of
custom functions.

The check for multicast together with multicast can also be replaced
with a single test for multicast because for every ethernet address x
following is always true:

is_broadcast_ether_addr(x) => is_multicast_ether_addr(x)

or when looking more at the implementation:

(FF:FF:FF:FF:FF:FF == x) => [(01:00:00:00:00:00 & x) != 00:00:00:00:00:00]
Reported-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The kernel headers already provide different versions of a min/max macro
which should be used by all modules according to
Documentation/CodingStyle.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Some additional checks will be needed in case of extension headers
like the fragmentation or hop-by-hop (for jumbo frames for example)
headers or ipsec stuff. But this patch should do for most people
for now, the rest can be added with a later one.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The DHCP filter inspects packets to determine whether or not to send
them via ethernet unicast. This patch adds 802.1Q (vlan) support for
this check.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If the gateway client mode is active batman-adv will send the
broadcasted DHCP requests via unicast to the currently selected best
gateway. Therefore attached clients can profit from batman's knowledge
about the network topology.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Via the /sys filesystem you can change the gateway mode of a node using
gw_mode. Adjustments to it can be done using gw_bandwidth for server
mode and gw_sel_class for client mode.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

spin_lock_irqsave disables the IRQs and stores them inside the flags
provided by the caller. This is needed to protect a bottom half handler
or a user context critical section from being interrupted by an
interrupt handler which also tries to acquire the spinlock and locks
forever.

The linux device drivers will receive the packets inside an interrupt
handler and the network infrastructure will process them inside bottom
half. Thus batman-adv will only run in user context and bottom half
handlers. We can conclude that batman-adv doesn't share its own
spinlocks with real interrupt handlers.

This makes it possible to exchange the quite complex spin_lock_irqsave
with spin_lock_bh which only stops bottom halves from running on the
current cpu, but allows interrupt handlers to take over to keep the
interrupt latency low.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>