1. 03 Jul, 2017 2 commits
  2. 29 Jun, 2017 2 commits
  3. 23 Jun, 2017 5 commits
  4. 22 Jun, 2017 3 commits
  5. 21 Jun, 2017 2 commits
  6. 20 Jun, 2017 6 commits
  7. 19 Jun, 2017 15 commits
    • Olof Johansson's avatar
      Merge tag 'imx-dt64-4.13' of... · b87a08f9
      Olof Johansson authored
      Merge tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
      
      The Freescale arm64 device tree updates for 4.13:
       - A series from NXP employee Li Yang that updates the copyright claims
         to comply with company policy.
       - A patch-set from Madalin Bucur that adds Data Path Acceleration
         Architecture (DPAA) QBMan and FMan.  Quite a few .dtsi files are
         created for SoCs with different DPAA configuration to include the
         devices as needed.
       - Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
         boards.
       - Enable TMU device for thermal management support on LS1088A.
       - Update SATA device node for LS1088A with correct compatible and ECC
         register bit.
       - A few small random device tree updates.
      
      * tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
        arm64: dts: ls1088a: update sata node
        dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list
        arm64: dts: ls1012a: Add coreclk
        arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
        arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
        arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM
        arm64: dts: add LS1046A DPAA FMan nodes
        arm64: dts: add LS1043A DPAA FMan support
        arm64: dts: add DPAA FMan nodes
        arm64: dts: add LS1046A DPAA QBMan nodes
        arm64: dts: add LS1043A DPAA QBMan nodes
        arm64: dts: add DPAA QBMan portals
        arm64: dts: ls1088a: Add TMU device tree support
        arm64: dts: ls1088a: update the sata node
        arm64: dts: Add flash node for ls1088a qds and rdb
        arm64: dts: ls1088a: add esdhc node
        arm64: dts: ls1012a: add eSDHC nodes
        arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
        arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
        mmc: dt: add compatible into eSDHC required properties
        ...
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      b87a08f9
    • Olof Johansson's avatar
      Merge tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu into next/dt64 · 4623e69d
      Olof Johansson authored
      mvebu dt64 for 4.13 (part 1)
      
      - Improve the mcbin support (Armada 8040 based board): add sdhci and
        the second 1G port
      - Improve crypro nodes description on Aramda 7K/8K
      - Use new binding for ap806 clocks
      - Improve mdio nodes and add xmdio on Aramda 7K/8K
      - Add second SGCI node on Armada 37xx
      - Improve the description of the Armada 3720 DB board
      
      * tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu:
        arm64: dts: marvell: add xmdio nodes for 7k/8k
        arm64: dts: marvell: add a comment on the cp110 slave node status
        arm64: dts: marvell: remove cpm crypto nodes from dts files
        arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
        arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot
        arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx
        arm64: dts: marvell: armada-37xx: Use angle bracket for each register set
        arm64: dts: marvell: armada-37xx: Align the compatible string
        arm64: dts: marvell: armada-3720-db: Add information about the V2 board
        arm64: dts: marvell: armada-3720-db: Sort the dts node alphabetically
        arm64: dts: marvell: disable the mdio nodes by default
        arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB
        arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k
        arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet
        arm64: dts: marvell: cp110: add required clocks for mdio interface
        arm64: dts: marvell: use new binding for the system controller on ap806
        arm64: dts: marvell: remove clock-output-names on ap806
        arm64: dts: marvell: add second 1G port on the Armada 8040 DB
        arm64: dts: marvell: mcbin: add sdhci
        arm64: dts: marvell: add clocks for Armada AP806 XOR engines
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      4623e69d
    • Olof Johansson's avatar
      Merge tag 'renesas-arm64-dt2-for-v4.13' of... · 5d518c8a
      Olof Johansson authored
      Merge tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
      
      Second Round of Renesas ARM64 Based SoC DT Updates for v4.13
      
      * Add reset control properties for audio to r9a779[56] SoCs
      * Add add DMA for IIC_DVFS to r9a779[56] SoCs
      * Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2
      * Add missing index to PWM pinctrl subnode name to Salvator-X board
      * Add 12288000 for sound ADG to Salvator-X and ULCB boards
      
      * tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        arm64: dts: r8a7796: Add reset control properties for audio
        arm64: dts: r8a7795: Add reset control properties for audio
        arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0
        arm64: dts: renesas: Add common Salvator-XS board support
        arm64: dts: renesas: Extract common Salvator-X/XS board support
        arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name
        arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
        arm64: dts: r8a7796: add DMA for IIC_DVFS
        arm64: dts: r8a7795: add DMA for IIC_DVFS
        arm64: dts: ulcb: add 12288000 for sound ADG
        arm64: dts: salvator-x: add 12288000 for sound ADG
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      5d518c8a
    • Olof Johansson's avatar
      Merge tag 'qcom-arm64-for-4.13' of... · 9d03b296
      Olof Johansson authored
      Merge tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64
      
      Qualcomm ARM64 Updates for v4.13
      
      * Fix APQ8016 SBC WLAN LED
      * Add MSM8996 CPU node
      * Add MSM8992 SMEM and fixed regulator
      * Fixup MSM8916 USB support
      
      * tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
        arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger
        arm64: dts: msm8996: Add CPU clock controller node
        arm64: dts: smem enablement for msm8992
        arm64: dts: msm8992 add fixed regulator
        arm64: dts: qcom: Collapse usb support into one node
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      9d03b296
    • Olof Johansson's avatar
      Merge tag 'tegra-for-4.13-arm64-dt' of... · e4b79c3b
      Olof Johansson authored
      Merge tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
      
      arm64: tegra: Device tree changes for v4.13-rc1
      
      This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
      frequency and voltage transitions.
      
      Also included is a bit of cleanup for PCI related device tree content,
      in preparation for a future DTC release that has additional checks for
      the PCI bus.
      
      * tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
        arm64: dts: nvidia: fix PCI bus dtc warnings
        arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      e4b79c3b
    • Olof Johansson's avatar
      Merge tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi into next/dt64 · 010da09e
      Olof Johansson authored
      ARM64: DT: Hisilicon SoC DT updates for 4.13
      
      - Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and
        Hi3660 MMC binding
      - Add and refine devices support for Hi3660-Hikey 960 including clock, reset,
        I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator,
        sd/sdio and WiFi
      - Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for
        Hikey board
      
      * tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits)
        arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
        arm64: dts: hi3660-hikey960: add nodes for WiFi
        arm64: dts: hi3660: add sd/sdio device nodes
        dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
        arm64: dts: hikey960: add device node for pmic and regulators
        dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
        arm64: dts: hisi: add kirin pcie node
        dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
        arm64: dts: hi3660: add sp804 timer node
        arm64: dts: hi3660: add spi device nodes
        arm64: dts: hikey960: add LED nodes
        arm64: dts: hi3660: add power key dts node
        arm64: dts: hi3660: Add pl031 rtc node
        arm64: dts: hikey960: add WL1837 Bluetooth device node
        arm64: dts: hi3660: Add uarts nodes
        arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
        arm64: dts: Add I2C nodes for Hi3660
        arm64: dts: hi3660: add resources for clock and reset
        arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
        arm64: dts: hisilicon: update compatible string for hikey960
        ...
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      010da09e
    • Olof Johansson's avatar
      Merge tag 'juno-updates-4.13' of... · 2003c78b
      Olof Johansson authored
      Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
      
      ARMv8 Vexpress/Juno DT updates for v4.13
      
      1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
      
      2. Enables support for few SMMUs on Juno which were previously disabled
         waiting for IOMMU-backed DMA API support to be stabilised.
      
      * tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
        arm64: dts: juno: enable some SMMUs
        arm64: dts: juno: add coresight CPU debug nodes
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      2003c78b
    • Olof Johansson's avatar
      Merge tag 'sunxi-dt-h5-for-4.13' of... · b69cfb5a
      Olof Johansson authored
      Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
      
      Allwinner H5 DT changes for 4.13
      
      Just like the H3, this is mostly about enabling the EMAC on the H5, and
      also has a new board, the Orange Pi Zero Plus 2
      
      * tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
        arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
        arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
        arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
        arm64: allwinner: h5: sort the device nodes in / part for some boards
        arm64: allwinner: h5: add support for NanoPi NEO2 board
        arm64: allwinner: h5: add support for Orange Pi Prime board
        arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
        arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
        arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
        ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      b69cfb5a
    • Olof Johansson's avatar
      Merge tag 'sunxi-dt64-for-4.13' of... · 08d13c70
      Olof Johansson authored
      Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
      
      Allwinner arm64 DT changes for 4.13
      
      Our usual arm64 changes. The most notable things are the EMAC support and
      USB support enhancements. There's also support for the SoPine SoM, and the
      OrangePi Win.
      
      * tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
        arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
        arm64: allwinner: a64: add device tree for SoPine with baseboard
        arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
        arm64: allwinner: pine64-plus: Enable dwmac-sun8i
        arm64: allwinner: pine64: Enable dwmac-sun8i
        arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
        arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
        arm64: allwinner: a64: add DTSI file for SoPine SoM
        arm64: allwinner: a64: Convert CCU raw number references to macros
        arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
        arm64: allwinner: a64: enable RSB on A64
        arm64: dts: allwinner: pine64: Add remaining UART aliases
        arm64: dts: allwinner: a64: Add UART2 pin nodes
        arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
        arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      08d13c70
    • Olof Johansson's avatar
      Merge tag 'amlogic-dt64' of... · 0fd5e852
      Olof Johansson authored
      Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64
      
      Amlogic 64-bit DT changes for v4.13
      - cleanup/reorganize alphabetically to better avoid conflicts
      - add HDMI and CVBS nodes for multiple boards
      - new pinctrl pins: SPI, HDMI CEC
      - SCPI: fix thermal sensor reporting
      
      New board support
      - NanoPi K2 (GXBB)
      - R-Box Pro (GXM)
      
      * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits)
        ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes
        ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes
        ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes
        ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes
        ARM64: dts: meson-gx: Fix sensors reporting from SCP
        ARM64: dts: meson-gxl: Add SPI pinctrl nodes
        ARM64: dts: meson-gxbb: Add SPI pinctrl nodes
        ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes
        ARM64: dts: meson-gxl: Add CEC pins nodes
        ARM64: dts: meson-gxbb: Add CEC pins nodes
        ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
        ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
        ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
        arm64: dts: amlogic: Add NanoPi K2
        dt-bindings: arm: amlogic: Add NanoPi K2
        arm64: dts: meson-gxm: Add R-Box Pro
        dt-bindings: arm: amlogic: Add R-Box Pro
        dt-bindings: Add Kingnovel vendor prefix
        arm64: dts: meson-gx-p23x-q20x: Fix node order
        arm64: dts: meson-gxm-nexbox-a1: Fix node order
        ...
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      0fd5e852
    • Olof Johansson's avatar
      Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64 · 8aba6143
      Olof Johansson authored
      This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
      4.13. Please note the following from Eric:
      
      I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
      patch series, but it does require being careful since it involves a cross-merge
      between branches.
      
      - Anup documents the Broadcom Stingray binding, common clocks, adds initial
        support for the Stingray DTSI and DTS files and adds support for the PL022,
        PL330 and SP805
      
      - Sandeep adds the clock nodes to the Stingray Device Tree nodes
      
      - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
      
      - Oza adds I2C Device Tree nodes to the Stingray DTSes
      
      - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
      
      - Ravijeta adds support for the USB Dual Role PHY on Northstar 2
      
      - Gerd starts adding references to the sdhost and sdhci controllers, and then
        switches the sdcard to to use the SDHOST (faster than SDHCI)
      
      - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
        thermal driver to work correctly
      
      * tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
        arm64: dts: NS2: Add USB DRD PHY device tree node
        ARM64: dts: bcm2837: Define CPU thermal coefficients
        arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
        arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
        arm64: dts: Add I2C DT nodes for Stingray SoC
        arm64: dts: Add GPIO DT nodes for Stingray SOC
        arm64: dts: Add pinctrl DT nodes for Stingray SOC
        arm64: dts: Add NAND DT nodes for Stingray SOC
        arm64: dts: Add clock DT nodes for Stingray SOC
        arm64: dts: Initial DTS files for Broadcom Stingray SOC
        dt-bindings: clk: Extend binding doc for Stingray SOC
        dt-bindings: bcm: Add Broadcom Stingray bindings document
        ARM: dts: bcm283x: switch from &sdhci to &sdhost
        arm64: dts: bcm2837: add &sdhci and &sdhost
        ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
        ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      8aba6143
    • Olof Johansson's avatar
      Merge tag 'uniphier-dt64-v4.13' of... · d828e978
      Olof Johansson authored
      Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64
      
      UniPhier ARM64 SoC DT updates for v4.13
      
      - specify timing delay properties of eMMC
      - fix W=1 build warnings
      - increase memory reserve size
      - use SPDX License Identifier
      - add new board support (LD11/LD20 global)
      
      * tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
        arm64: dts: uniphier: add support for LD20 Global board
        arm64: dts: uniphier: add support for LD11 Global board
        arm64: dts: uniphier: use SPDX-License-Identifier
        arm64: dts: uniphier: reserve more memory for LD11/LD20
        arm64: dts: uniphier: fix simple-bus unit address format error
        arm64: dts: uniphier: Use - instead of @ for DT OPP entries
        arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
        arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      d828e978
    • Olof Johansson's avatar
      Merge tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64 · d8a41096
      Olof Johansson authored
      Add device tree nodes for
      mt8173:
      - split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
      - move USB phy clocks up in hierarchy to met new bindings description
      - move MDP nodes up in hierarchy to met new bindings description
      
      mt6797:
      - add basic SoC support
      - add clock driver
      - add power domain
      
      dt-bindings:
      - clean-up i2c binding description
      - add binding for mt2701 i2c node
      - add fallback compatible to scpsys binding description
      - add bindings description for mt7622 and mt6796
      
      * tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
        dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
        arm64: dts: mt8173: Fix mdp device tree
        dt-bindings: i2c: Add Mediatek MT2701 i2c binding
        dt-bindings: i2c-mtk: Add mt7623 binding
        dt-bindings: i2c-mtk: Delete bindings
        dt-bindings: i2c-mt6577: Rename file to reflect bindings
        dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
        arm64: dts: mediatek: add clk and scp nodes for MT6797
        dt-bindings: mediatek: add MT6797 power dt-bindings
        arm64: dts: mediatek: add mt6797 support
        dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
        arm64: dts: mt8173: move clock from phy node into port nodes
        arm64: dts: mt8173: split usb SuperSpeed port into two ports
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      d8a41096
    • Olof Johansson's avatar
      Merge tag 'samsung-dt64-4.13' of... · c7404287
      Olof Johansson authored
      Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
      
      Samsung DeviceTree ARM64 update for v4.13:
      1. Remove unneeded TE interrupt gpio property.
      
      * tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
        arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      c7404287
    • Olof Johansson's avatar
      Merge tag 'v4.13-rockchip-dts64-1' of... · b21af975
      Olof Johansson authored
      Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
      
      Support for the new rk3399 firefly board; extending the pcie ranges to
      make usage of pci switches possible; some more qos and pinctrl nodes on
      rk3399; updates for the rk3399 cpu operating points including separate
      opps for the higher rates OP1 variant of the chip and mmc-nodes for
      the rk3328.
      
      * tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
        arm64: dts: rockchip: update common rk3399 operating points
        arm64: dts: rockchip: introduce rk3399-op1 operating points
        arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
        arm64: dts: rockchip: add ethernet0 alias on rk3399
        arm64: dts: rockchip: bring rk3399-firefly power-tree in line
        arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
        arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
        arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
        arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
        arm64: dts: rockchip: add some missing qos nodes on rk3399
        arm64: dts: rockchip: add support for firefly-rk3399 board
        dt-bindings: add firefly-rk3399 board support
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      b21af975
  8. 18 Jun, 2017 2 commits
  9. 17 Jun, 2017 3 commits