- 24 Sep, 2012 4 commits
-
-
Greg Rose authored
While fixing up a patch from Alex Duyck to use q_vectors in ring containers to update the ITR I bungled it and missed actually updating the counters in the ring container q_vectors. This patch fixes my mistake and makes interrupt moderation actually work. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Narendra K authored
Remove 'rx_ring' parameter as it is not used in ixgbevf_receive_skb Signed-off-by:
Narendra K <narendra_k@dell.com> Acked-by:
-
Greg Rose authored
The counter is not valid unless the controller is running in IOV mode. Signed-off-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
Alexander Duyck authored
The VF driver was not designed to correctly handle a message timeout. As a result it is possible for one bad message to invalidate all messages following it until the part is reset. Instead we should copy the example in igbvf of how to handle a mailbox event and message timeout. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
- 23 Sep, 2012 2 commits
-
-
David S. Miller authored
Suggested by Jan Engelhardt. Signed-off-by:David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
When recording the number of SYNACK retransmits for servers using TCP Fast Open, fix the code to ensure that we copy over the retransmit count from the request_sock after we receive the ACK that completes the 3-way handshake. The story here is similar to that of SYNACK RTT measurements. Previously we were always doing this in tcp_v4_syn_recv_sock(). However, for TCP Fast Open connections tcp_v4_conn_req_fastopen() calls tcp_v4_syn_recv_sock() at the time we receive the SYN. So for TFO we must copy the final SYNACK retransmit count in tcp_rcv_state_process(). Note that copying over the SYNACK retransmit count will give us the correct count since, as is mentioned in a comment in tcp_retransmit_timer(), before we receive an ACK for our SYN-ACK a TFO passive connection does not retransmit anything else (e.g., data or FIN segments). Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
- 22 Sep, 2012 18 commits
-
-
David S. Miller authored
We're now using isa_virt_to_bus(), and there really isn't a generic and consistent test for whether a platform provides this interface or not. This driver is also for an x86-only device. Signed-off-by: -
Neal Cardwell authored
A TCP Fast Open (TFO) passive connection must call both tcp_check_req() and tcp_validate_incoming() for all incoming ACKs that are attempting to complete the 3WHS. This is needed to parallel all the action that happens for a non-TFO connection, where for an ACK that is attempting to complete the 3WHS we call both tcp_check_req() and tcp_validate_incoming(). For example, upon receiving the ACK that completes the 3WHS, we need to call tcp_fast_parse_options() and update ts_recent based on the incoming timestamp value in the ACK. One symptom of the problem with the previous code was that for passive TFO connections using TCP timestamps, the outgoing TS ecr values ignored the incoming TS val value on the ACK that completed the 3WHS. Signed-off-by:
-
Neal Cardwell authored
Previously, when using TCP Fast Open a server would return from tcp_check_req() before updating snt_synack based on TCP timestamp echo replies and whether or not we've retransmitted the SYNACK. The result was that (a) for TFO connections using timestamps we used an incorrect baseline SYNACK send time (tcp_time_stamp of SYNACK send instead of rcv_tsecr), and (b) for TFO connections that do not have TCP timestamps but retransmit the SYNACK we took a SYNACK RTT sample when we should not take a sample. This fix merely moves the snt_synack update logic a bit earlier in the function, so that connections using TCP Fast Open will properly do these updates when the ACK for the SYNACK arrives. Moving this snt_synack update logic means that with TCP_DEFER_ACCEPT enabled we do a few instructions of wasted work on each bare ACK, but that seems OK. Signed-off-by:
-
Neal Cardwell authored
When taking SYNACK RTT samples for servers using TCP Fast Open, fix the code to ensure that we only call tcp_valid_rtt_meas() after we receive the ACK that completes the 3-way handshake. Previously we were always taking an RTT sample in tcp_v4_syn_recv_sock(). However, for TCP Fast Open connections tcp_v4_conn_req_fastopen() calls tcp_v4_syn_recv_sock() at the time we receive the SYN. So for TFO we must wait until tcp_rcv_state_process() to take the RTT sample. To fix this, we wait until after TFO calls tcp_v4_syn_recv_sock() before we set the snt_synack timestamp, since tcp_synack_rtt_meas() already ensures that we only take a SYNACK RTT sample if snt_synack is non-zero. To be careful, we only take a snt_synack timestamp when a SYNACK transmit or retransmit succeeds. Signed-off-by:
-
Neal Cardwell authored
In preparation for adding another spot where we compute the SYNACK RTT, extract this code so that it can be shared. Signed-off-by:
-
Richard Cochran authored
There has been some confusion among PHC driver authors about the intended purpose of the clock_name attribute. This patch expands the documation in order to clarify how the clock_name field should be understood. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
PTP Hardware Clock devices appear as class devices in sysfs. This patch changes the registration API to use the parent device, clarifying the clock's relationship to the underlying device. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Acked-by:
-
Richard Cochran authored
If the timex.mode field indicates a query, then we provide the value of the current frequency adjustment. [ Get rid of extraneous empty lines -DaveM ] Signed-off-by:
-
Richard Cochran authored
This patch adds a field to the representation of a PTP hardware clock in order to remember the frequency adjustment value dialed by the user. Adding this field will let us answer queries in the manner of adjtimex in a follow on patch. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to igb only. ==================== Signed-off-by: -
Andreas Larsson authored
One-shot mode uses the TCS bit of the status register to discern whether a transmission was successful or not. On a failed transmission, the frame is not echoed back. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Alexander Duyck authored
This change is meant to improve performance on systems that do not require the DMA unmap calls. On those systems we do not need to make use of the unmap address for Tx or the unmap length so we can drop both thereby reducing the size of the Tx buffer info structure. In addition I have changed the logic to check for unmap length instead of unmap address when checking to see if a buffer needs to be unmapped from DMA use. The reasons for this change is that on some platforms it is possible to receive a valid DMA address of 0 from an IOMMU. Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Alexander Duyck authored
Instead of storing the RSS key as a character array we can simplify the configuration by making it a u32 array. This allows us to just write one value per register without any unnecessary operations to construct the value. This change will produce the same exact key, the only difference is that I translated the u8 array to a u32 array which will be correctly ordered on writes to hardware by the cpu_to_le32 operations that are built into the writel calls. Signed-off-by:
-
Alexander Duyck authored
This patch cleans up our RSS indirection table configuration so that we generate the same table regardless of CPU endianness. In addition it changes the table setup so that instead of doing a modulo based setup it is instead a divisor based setup. The advantage to this is that we should be able to take the Rx hash and compute the Rx queue with very little CPU overhead if needed. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that Tx cleanup is done in a do/while loop instead of a for loop. The main motivation behind this is the fact that we should never be invoked with a budget less than 1 so we can skip checking the budget before processing the first descriptor. Signed-off-by:
-
Alexander Duyck authored
This change removes the code that was doing the NUMA allocations for the q_vectors, rings, and ring resources. The problem is the logic used assumed that the NUMA nodes were always interleved and that is not always the case. At some point I hope to add this functionality back in a more controlled manner in the future. Signed-off-by:
-
Carolyn Wyborny authored
Due to a hardware issue, on i210 and i211 parts, the TNCRS statistic provides an invalid value. This patch changes the update stats function to increment the stat only for non-i210/i211 parts. Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
-
Stefan Assmann authored
Adapt the pre-existing and assigned VFs code to the ixgbe way introduced in commit 9297127b. Instead of searching the enabled VFs we use pci_num_vf to determine enabled VFs. By comparing to which PF an assigned VF is owned it's possible to decide whether to leave it enabled or not. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Acked-by:
Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by:
-
- 21 Sep, 2012 15 commits
-
-
Wei Yongjun authored
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Cc: stable <stable@vger.kernel.org> Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
-
Randy Dunlap authored
Rename generic-sounding function dump_mem() to pcan_dump_mem() so that it does not conflict with the dump_mem() function in arch/sh/include/asm/kdebug.h. drivers/net/can/usb/peak_usb/pcan_usb_core.c: error: conflicting types for 'dump_mem': => 56:6 drivers/net/can/usb/peak_usb/pcan_usb_core.h: error: conflicting types for 'dump_mem': => 134:6 Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> [mkl: convert all users of dump_mem(), too] Signed-off-by:
-
AnilKumar Ch authored
Adopt pinctrl support to c_can driver based on c_can device pointer, pinctrl driver configure SoC pins to d_can mode according to definitions provided in .dts file. In device specific device tree file 'pinctrl-names = "default";' and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins from c_can driver. d_can1_pins node contains the pinmux/config details of d_can L/H pins. Signed-off-by:
AnilKumar Ch <anilkumar@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
AnilKumar Ch authored
Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by:
-
AnilKumar Ch authored
Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM APIs control clocks for C_CAN/D_CAN IP and prevent access to the register of C_CAN/D_CAN IP when clock is turned off. Signed-off-by:
-
AnilKumar Ch authored
Add device tree support to C_CAN/D_CAN controller and usage details are added to device tree documentation. Driver was tested on AM335x EVM. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
AnilKumar Ch authored
Modify c_can device names from *_CAN_DEVTYPE to BOSCH_*_CAN to make use of same names for array indexes in c_can_id_table[] as well as device names. This patch also add indexes to c_can_id_table array. Signed-off-by:
-
Pablo Neira Ayuso authored
Since (9f00d977 netlink: hide struct module parameter in netlink_kernel_create), linux/netlink.h includes linux/module.h because of the use of THIS_MODULE. Use linux/export.h instead, as suggested by Stephen Rothwell, which is significantly smaller and defines THIS_MODULES. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
David S. Miller authored
Commit eb716c54 ("sunbmac: remove unnecessary setting of skb->dev") caused the local varible 'dev' in bigmac_init_rings to become unused. And now the compiler warns about it. Signed-off-by:
-
Jiri Pirko authored
On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Christoph Fritz authored
On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Tested-by:
Jan Weitzel <j.weitzel@phytec.de> Signed-off-by:
-
Bjørn Mork authored
One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Amerigo Wang authored
When CONFIG_IPV6=m and CONFIG_L2TP=y, I got the following compile error: LD init/built-in.o net/built-in.o: In function `l2tp_xmit_core': l2tp_core.c:(.text+0x147781): undefined reference to `inet6_csk_xmit' net/built-in.o: In function `l2tp_tunnel_create': (.text+0x149067): undefined reference to `udpv6_encap_enable' net/built-in.o: In function `l2tp_ip6_recvmsg': l2tp_ip6.c:(.text+0x14e991): undefined reference to `ipv6_recv_error' net/built-in.o: In function `l2tp_ip6_sendmsg': l2tp_ip6.c:(.text+0x14ec64): undefined reference to `fl6_sock_lookup' l2tp_ip6.c:(.text+0x14ed6b): undefined reference to `datagram_send_ctl' l2tp_ip6.c:(.text+0x14eda0): undefined reference to `fl6_sock_lookup' l2tp_ip6.c:(.text+0x14ede5): undefined reference to `fl6_merge_options' l2tp_ip6.c:(.text+0x14edf4): undefined reference to `ipv6_fixup_options' l2tp_ip6.c:(.text+0x14ee5d): undefined reference to `fl6_update_dst' l2tp_ip6.c:(.text+0x14eea3): undefined reference to `ip6_dst_lookup_flow' l2tp_ip6.c:(.text+0x14eee7): undefined reference to `ip6_dst_hoplimit' l2tp_ip6.c:(.text+0x14ef8b): undefined reference to `ip6_append_data' l2tp_ip6.c:(.text+0x14ef9d): undefined reference to `ip6_flush_pending_frames' l2tp_ip6.c:(.text+0x14efe2): undefined reference to `ip6_push_pending_frames' net/built-in.o: In function `l2tp_ip6_destroy_sock': l2tp_ip6.c:(.text+0x14f090): undefined reference to `ip6_flush_pending_frames' l2tp_ip6.c:(.text+0x14f0a0): undefined reference to `inet6_destroy_sock' net/built-in.o: In function `l2tp_ip6_connect': l2tp_ip6.c:(.text+0x14f14d): undefined reference to `ip6_datagram_connect' net/built-in.o: In function `l2tp_ip6_bind': l2tp_ip6.c:(.text+0x14f4fe): undefined reference to `ipv6_chk_addr' net/built-in.o: In function `l2tp_ip6_init': l2tp_ip6.c:(.init.text+0x73fa): undefined reference to `inet6_add_protocol' l2tp_ip6.c:(.init.text+0x740c): undefined reference to `inet6_register_protosw' net/built-in.o: In function `l2tp_ip6_exit': l2tp_ip6.c:(.exit.text+0x1954): undefined reference to `inet6_unregister_protosw' l2tp_ip6.c:(.exit.text+0x1965): undefined reference to `inet6_del_protocol' net/built-in.o:(.rodata+0xf2d0): undefined reference to `inet6_release' net/built-in.o:(.rodata+0xf2d8): undefined reference to `inet6_bind' net/built-in.o:(.rodata+0xf308): undefined reference to `inet6_ioctl' net/built-in.o:(.data+0x1af40): undefined reference to `ipv6_setsockopt' net/built-in.o:(.data+0x1af48): undefined reference to `ipv6_getsockopt' net/built-in.o:(.data+0x1af50): undefined reference to `compat_ipv6_setsockopt' net/built-in.o:(.data+0x1af58): undefined reference to `compat_ipv6_getsockopt' make: *** [vmlinux] Error 1 This is due to l2tp uses symbols from IPV6, so when IPV6 is a module, l2tp is not allowed to be builtin. Cc: David Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to igb and ixgbevf. v2: updated patch description in 04 patch (ixgbevf: scheduling while atomic in reset hw path) ... Akeem G. Abodunrin (1): igb: Support to enable EEE on all eee_supported devices Alexander Duyck (2): igb: Remove artificial restriction on RQDPC stat reading ixgbevf: Add support for VF API negotiation John Fastabend (1): ixgbevf: scheduling while atomic in reset hw path ==================== Signed-off-by: -
Joe Perches authored
Remove unnecessary temporary variable and #ifdef DEBUG block. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 20 Sep, 2012 1 commit
-
-
Greg Kroah-Hartman authored
The dbg() USB macro is so old, it predates me. The USB networking drivers are the last hold-out using this macro, and we want to get rid of it, so replace the usage of it with the proper netdev_dbg() or dev_dbg() (depending on the context) calls. Some places we end up using a local variable for the debug call, so also convert the other existing dev_* calls to use it as well, to save tiny amounts of code space. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
