- 04 Jan, 2023 3 commits
-
-
AngeloGioacchino Del Regno authored
That variable was used twice, but now it's just used once to store msecs_to_jiffies(wait), fed to wait_event_timeout(): we might as well remove it for the sake of cleaning up. This brings no functional changes. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230104115341.320951-3-angelogioacchino.delregno@collabora.comSigned-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org>
-
AngeloGioacchino Del Regno authored
Convert the usage of an open-coded custom tight poll while loop with the provided readl_poll_timeout_atomic() macro. This cleanup brings no functional change. Signed-off-by:
-
Chen-Yu Tsai authored
Clocks are properly reference counted and do not need to be inside the lock range. Right now this triggers a false-positive lockdep warning on MT8192 based Chromebooks, through a combination of mtk-scp that has a cros-ec-rpmsg sub-device, the (actual) cros-ec I2C adapter registration, I2C client (not on cros-ec) probe doing i2c transfers and enabling clocks. This is a false positive because the cros-ec-rpmsg under mtk-scp does not have an I2C adapter, and also each I2C adapter and cros-ec instance have their own mutex. Move the clk operations outside of the send_lock range. Fixes: 63c13d61 ("remoteproc/mediatek: add SCP support for mt8183") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
-
- 28 Dec, 2022 14 commits
-
-
Mukesh Ojha authored
Currently, the notification like QCOM_SSR_BEFORE_SHUTDOWN is not exactly sent before starting shutdown activity on remote subsystem but it is getting sent after sysmon shutdown request to remote. On getting QCOM_SSR_BEFORE_SHUTDOWN, some client want remote subsystem to be alive to communicate but as sysmon shutdown request is getting sent to remote before QCOM_SSR_BEFORE_SHUTDOWN notification sent to kernel client due to which remote is not in a condition to communicate with kernel clients. Fixing the subdevice ordering will fix this as ssr subdevice will be first one to get triggered in shutdown/stop path. Signed-off-by:
Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1671024983-22634-1-git-send-email-quic_mojha@quicinc.com
-
Sireesh Kodali authored
Add support for booting the Audio DSP on the MSM8953 platform. This is used by SoCs like SDM450, SDM625, SDM626, APQ8053, etc. Since the configuration is the same on all SoCs, a single compatible string is used. Signed-off-by:
Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Sireesh Kodali authored
Add support for the Audio DSP PIL found on the Qualcomm MSM8953 platform. The same configuration is used on all SoCs based on the MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053). Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Update pil driver with SMMU mapping for allowing authorised memory access to ADSP firmware, by carveout reserved adsp memory region from device tree file. Signed-off-by:
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Add efuse evb selection control and enable it for starting ADSP. Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Replace hard coded values of QDSP6 boot control reg params with appropriate macro names. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Srinivasa Rao Mandadapu authored
Change parse_fw callback in rproc ops from qcom_register_dump_segments to local function such that, it can perform coredump segments registration and it can parse section header in memory sandboxing required platforms. Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Update adsp pil data and compatible name for loading ADSP binary on SC7280 based platforms. Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Add flag in qcom_adsp private data structure and initialize it to distinguish ADSP modules, which has iommu requirement, for using iommu selectively. Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Add ADSP PIL loading support for SC7280 SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Gokul krishna Krishnakumar authored
Avoid setting smem bit in case of crash shutdown, as remote processor is not able to send the ack back. Signed-off-by:
Gokul krishna Krishnakumar <quic_gokukris@quicinc.com> [bjorn: Rewrote the comment] Signed-off-by:
-
Gaosheng Cui authored
qcom_iris_driver has been removed since commit 1fcef985 ("remoteproc: qcom: wcnss: Fix race with iris probe"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Abel Vesa authored
Only msm8996 and msm8998 SLPIs need the RPM_SMD_AGGR2_NOC_CLK (as aggre2 clock). None of the other platforms do. Back when the support for the mentioned platforms was added to the q6v5 pass driver, the devm_clk_get_optional was not available, so the has_aggre2_clk was necessary in order to differentiate between plaforms that need this clock and those which do not. Now that devm_clk_get_optional is available, we can drop the has_aggre2_clk. This makes the adsp_data more cleaner and removes the check within adsp_init_clocks. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Signed-off-by:
-
- 27 Dec, 2022 22 commits
-
-
Krzysztof Kozlowski authored
According to DTS and Linux driver, the MSM8996 SLPI PIL takes two clocks - xo and aggre2: qcom/msm8996-oneplus3t.dtb: remoteproc@1c00000: clocks: [[20], [3, 64]] is too long qcom/msm8996-oneplus3t.dtb: remoteproc@1c00000: clock-names: ['xo', 'aggre2'] is too long Signed-off-by:
-
Krzysztof Kozlowski authored
Split SC7180 and SC7280remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. Signed-off-by:
-
Krzysztof Kozlowski authored
Split QCS404 remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. Signed-off-by:
-
Krzysztof Kozlowski authored
Split SDX55 remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. Signed-off-by:
-
Krzysztof Kozlowski authored
Split SC8180x remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. The binding is incomplete due to lack of upstreamed DTS - no example and not all power domains defined. Signed-off-by:
-
Krzysztof Kozlowski authored
Split SC8280XP remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. While moving correctly constrain the number of interrupts per specific device. Signed-off-by:
-
Krzysztof Kozlowski authored
Split SM6350 remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. Signed-off-by:
-
Krzysztof Kozlowski authored
Split SM8150 and SM8250 remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. Signed-off-by:
-
Krzysztof Kozlowski authored
Split SM8350 and SM8450 remote processor Peripheral Authentication Service bindings into their own file to reduce complexity and make maintenance easier. Signed-off-by:
-
Krzysztof Kozlowski authored
Split common part of Qualcomm SoC Peripheral Authentication Service bindings into a re-usable schema file. Signed-off-by:
-
Krzysztof Kozlowski authored
Some remote processors (e.g. QCS404 CDSP, SC7180 MPSS/MSS) can be brought to life using two different bindings: 1. PIL (Peripheral Image Loader) 2. PAS (Peripheral Authentication Service) They still describe the same hardware - firmware load for remote processor - but use different methods to communicate with that processor. For these SoCs, the qcom,adsp.yaml bindings were describing the PAS method, however for easier customization of board DTS, the bindings combined additional properties from PIL: reset lines, qcom,halt-regs and additional clocks. The devices and Linux kernel drivers, when instantiated as PAS, do not use these properties, so drop them from the bindings. Signed-off-by:
-
Sireesh Kodali authored
On MSM8974, power domains are not yet supported. The platform uses regulators. This patch marks either the power-domains or *-supply as required (instead of always requiring the power domains). Signed-off-by:
-
Sireesh Kodali authored
The pronto v3 remoteproc is similar to pronto v2. It is found on the MSM8953 platform, which is used by SDM450, SDM625, SDM626, APQ8053 and other SoCs. Since the configuration is same on all SoCs, a single compatible is used. Signed-off-by:
-
Sireesh Kodali authored
This is not a fallback compatible, it must be present in addition to "qcom,pronto-v*". It is also not documented in qcom,wcnss-pil.txt. This is the reason for documenting it in a separate commit. This compatible is used in the wcn36xx driver to determine which register must be accessed. However it isn't immediately clear why the wcn36xx driver relies on this extra compatible string rather than just looking for "qcom,pronto-v*". Signed-off-by:
-
Sireesh Kodali authored
This is a direct conversion of the existing txt documentation to YAML. It is in preparation for the addition of pronto-v3 to the docs. This patch doesn't document any of the existing subnodes/properties that are not documented in the existing txt file. That is done in a separate patch. Signed-off-by:
-
Vladimir Lypak authored
Pronto-v3 is similar to pronto-v2. It requires two power domains, one regulator, and it requires the xo clock. It is used on the MSM8953 platform. Signed-off-by:
Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Sireesh Kodali authored
The modem on the MSM8953 platform is similar to the modem on the MSM8996 platform in terms of set up. It differs primarily in that TZ needs to be informed of the modem start address and pas_id. Signed-off-by:
Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by:
-
Stephan Gerhold authored
Add the compatible for MSS as found on the MSM8953 platform. The situation is similar to the existing bindings for MSM8974: there is an additional "mss" power domain that must be voted for while starting up the remote processor. The difference is that on MSM8974 the power domain is represented as a regulator (firmware expects specific voltage) while on MSM8953 it is represented as power domain (firmware expects performance state instead of voltage). Handle this difference by adding the "mss" power domain as optional third item, and then restrict it (and make it required) only when using the MSM8953 compatible. Co-developed-by:
-
Stephan Gerhold authored
Port the initialization sequence necessary for booting the modem remote processor on the MSM8909 SoC from Qualcomm's msm-3.10 release [1]. The sequence is actually similar to the existing one for MSM8996 and MSM8998 except that there is no separate QDSP6SS_MEM_PWR_CTL register and most of the "memories" are enabled at once instead of sequentially. To reuse the existing code just insert some if statements where needed and add a configuration similar to the one from MSM8916. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/commit/56dcedc8dac8abff6b007f76a29430b2d0a44704Signed-off-by:
-
Stephan Gerhold authored
Document the "qcom,msm8909-mss-pil" compatible for the modem remote processor on MSM8909. It is used pretty much exactly like the existing one for MSM8916. Signed-off-by:
-
Stephan Gerhold authored
The "qcom,msm8974-mss-pil" binding is still similar enough to MSM8916 to be covered by the same DT schema. The only difference is the additional "mss-supply", which can be easily handled using a single if statement. Signed-off-by:
-
Stephan Gerhold authored
qcom,q6v5.txt covers multiple SoCs with quite different binding requirements. Converting this into one DT schema would require several if statements, making the DT schema overall harder to read and understand. To avoid this, follow the example of SC7180/SC7280 and split "qcom,msm8916-mss-pil" (and the equivalent deprecated "qcom,q6v5-pil" compatible) into a separate DT schema. The schema is somewhat based on the one for SC7180/SC7280 but adjusted for the old platforms. Compared to the old plain text bindings, add missing documentation for the "bam-dmux" subnode and recommend one particular approach to specify the MBA/MPSS "memory-region" (the other one is marked as deprecated). Signed-off-by:
-
- 25 Dec, 2022 1 commit
-
-
Linus Torvalds authored
-
