- 12 Mar, 2020 40 commits
-
-
Paul Blakey authored
Register driver callbacks with the nf flow table platform. FT add/delete events will create/delete FTE in the CT/CT_NAT tables. Restoring the CT state on miss will be added in the following patch. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Oz Shlomo <ozsh@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Blakey authored
Add support for offloading tc ct action and ct matches. We translate the tc filter with CT action the following HW model: +-------------------+ +--------------------+ +--------------+ + pre_ct (tc chain) +----->+ CT (nat or no nat) +--->+ post_ct +-----> + original match + | + tuple + zone match + | + fte_id match + | +-------------------+ | +--------------------+ | +--------------+ | v v v set chain miss mapping set mark original set fte_id set label filter set zone set established actions set tunnel_id do nat (if needed) do decap Signed-off-by: -
Paul Blakey authored
Add relevant getter for ct info dissector. Signed-off-by:
-
Paul Blakey authored
Currently, we write chain register mapping on miss from the the last prio of a chain. It is used to restore the chain in software. To support re-using the chain register mapping from global tables (such as CT tuple table) misses, export the chain mapping. Signed-off-by:
-
Paul Blakey authored
FTEs in global tables may match on packets from multiple in_ports. Provide the capability to omit the in_port match condition. Signed-off-by:
-
Paul Blakey authored
Currently, flow tables are automatically connected according to their <chain,prio,level> tuple. Introduce global tables which are flow tables that are detached from the eswitch chains processing, and will be connected by explicitly referencing them from multiple chains. Add this new table type, and allow connecting them by refenece. Signed-off-by:
-
Paul Blakey authored
Pass the zone's flow table instance on the flow action to the drivers. Thus, allowing drivers to register FT add/del/stats callbacks. Finally, enable hardware offload on the flow table instance. Signed-off-by:
-
Paul Blakey authored
If driver deleted an FT entry, a FT failed to offload, or registered to the flow table after flows were already added, we still get packets in software. For those packets, while restoring the ct state from the flow table entry, refresh it's hardware offload. Signed-off-by:
-
Paul Blakey authored
Provide an API to restore the ct state pointer. This may be used by drivers to restore the ct state if they miss in tc chain after they already did the hardware connection tracking action (ct_metadata action). For example, consider the following rule on chain 0 that is in_hw, however chain 1 is not_in_hw: $ tc filter add dev ... chain 0 ... \ flower ... action ct pipe action goto chain 1 Packets of a flow offloaded (via nf flow table offload) by the driver hit this rule in hardware, will be marked with the ct metadata action (mark, label, zone) that does the equivalent of the software ct action, and when the packet jumps to hardware chain 1, there would be a miss. CT was already processed in hardware. Therefore, the driver's miss handling should restore the ct state on the skb, using the provided API, and continue the packet processing in chain 1. Signed-off-by:
-
Paul Blakey authored
NF flow table API associate 5-tuple rule with an action list by calling the flow table type action() CB to fill the rule's actions. In action CB of act_ct, populate the ct offload entry actions with a new ct_metadata action. Initialize the ct_metadata with the ct mark, label and zone information. If ct nat was performed, then also append the relevant packet mangle actions (e.g. ipv4/ipv6/tcp/udp header rewrites). Drivers that offload the ft entries may match on the 5-tuple and perform the action list. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Paul Blakey authored
Let drivers to add their cb allowing them to receive flow offload events of type TC_SETUP_CLSFLOWER (REPLACE/DEL/STATS) for flows managed by the flow table. Signed-off-by:
-
Paul Blakey authored
The eswitch offloads table, which has the reps (vport) rx miss rules, was moved from OFFLOADS namespace [0,0] (prio, level), to [1,0], so the restore table (the new [0,0]) can come before it. The destinations of these miss rules is the rep root ft (ttc for non uplink reps). Uplink rep root ft is created as OFFLOADS namespace [0,1], and is used as a hook to next RX prio (either ethtool or ttc), but this fails to pass fs_core level's check. Move uplink rep root ft to OFFLOADS prio 1, level 1 ([1,1]), so it will keep the same relative position after the restore table change. Signed-off-by:
-
Paul Blakey authored
Enable reg c1 loopback if firmware reports it's supported, as this is needed for restoring packet metadata (e.g chain). Also define helper to query if it is enabled. Signed-off-by:
-
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== Improve bind(addr, 0) behaviour. Currently we fail to bind sockets to ephemeral ports when all of the ports are exhausted even if all sockets have SO_REUSEADDR enabled. In this case, we still have a chance to connect to the different remote hosts. These patches add net.ipv4.ip_autobind_reuse option and fix the behaviour to fully utilize all space of the local (addr, port) tuples. Changes in v5: - Add more description to documents. - Fix sysctl option to use proc_dointvec_minmax. - Remove the Fixes: tag and squash two commits. Changes in v4: - Add net.ipv4.ip_autobind_reuse option to not change the current behaviour. - Modify .gitignore for test. https://lore.kernel.org/netdev/20200308181615.90135-1-kuniyu@amazon.co.jp/ Changes in v3: - Change the title and write more specific description of the 3rd patch. - Add a test in tools/testing/selftests/net/ as the 4th patch. https://lore.kernel.org/netdev/20200229113554.78338-1-kuniyu@amazon.co.jp/ Changes in v2: - Change the description of the 2nd patch ('localhost' -> 'address'). - Correct the description and the if statement of the 3rd patch. https://lore.kernel.org/netdev/20200226074631.67688-1-kuniyu@amazon.co.jp/ v1 with tests: https://lore.kernel.org/netdev/20200220152020.13056-1-kuniyu@amazon.co.jp/ ==================== Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
This commit adds a test to check if we can fully utilize 4-tuples for connect() when all ephemeral ports are exhausted. The test program changes the local port range to use only one port and binds two sockets with or without SO_REUSEADDR and SO_REUSEPORT, and with the same EUID or with different EUIDs, then do listen(). We should be able to bind only one socket having both SO_REUSEADDR and SO_REUSEPORT per EUID, which restriction is to prevent unintentional listen(). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
Kuniyuki Iwashima authored
If there is no TCP_LISTEN socket on a ephemeral port, we can bind multiple sockets having SO_REUSEADDR to the same port. Then if all sockets bound to the port have also SO_REUSEPORT enabled and have the same EUID, all of them can be listened. This is not safe. Let's say, an application has root privilege and binds sockets to an ephemeral port with both of SO_REUSEADDR and SO_REUSEPORT. When none of sockets is not listened yet, a malicious user can use sudo, exhaust ephemeral ports, and bind sockets to the same ephemeral port, so he or she can call listen and steal the port. To prevent this issue, we must not bind more than one sockets that have the same EUID and both of SO_REUSEADDR and SO_REUSEPORT. On the other hand, if the sockets have different EUIDs, the issue above does not occur. After sockets with different EUIDs are bound to the same port and one of them is listened, no more socket can be listened. This is because the condition below is evaluated true and listen() for the second socket fails. } else if (!reuseport_ok || !reuseport || !sk2->sk_reuseport || rcu_access_pointer(sk->sk_reuseport_cb) || (sk2->sk_state != TCP_TIME_WAIT && !uid_eq(uid, sock_i_uid(sk2)))) { if (inet_rcv_saddr_equal(sk, sk2, true)) break; } Therefore, on the same port, we cannot do listen() for multiple sockets with different EUIDs and any other listen syscalls fail, so the problem does not happen. In this case, we can still call connect() for other sockets that cannot be listened, so we have to succeed to call bind() in order to fully utilize 4-tuples. Summarizing the above, we should be able to bind only one socket having SO_REUSEADDR and SO_REUSEPORT per EUID. Signed-off-by: -
Kuniyuki Iwashima authored
Commit aacd9289 ("tcp: bind() use stronger condition for bind_conflict") introduced a restriction to forbid to bind SO_REUSEADDR enabled sockets to the same (addr, port) tuple in order to assign ports dispersedly so that we can connect to the same remote host. The change results in accelerating port depletion so that we fail to bind sockets to the same local port even if we want to connect to the different remote hosts. You can reproduce this issue by following instructions below. 1. # sysctl -w net.ipv4.ip_local_port_range="32768 32768" 2. set SO_REUSEADDR to two sockets. 3. bind two sockets to (localhost, 0) and the latter fails. Therefore, when ephemeral ports are exhausted, bind(0) should fallback to the legacy behaviour to enable the SO_REUSEADDR option and make it possible to connect to different remote (addr, port) tuples. This patch allows us to bind SO_REUSEADDR enabled sockets to the same (addr, port) only when net.ipv4.ip_autobind_reuse is set 1 and all ephemeral ports are exhausted. This also allows connect() and listen() to share ports in the following way and may break some applications. So the ip_autobind_reuse is 0 by default and disables the feature. 1. setsockopt(sk1, SO_REUSEADDR) 2. setsockopt(sk2, SO_REUSEADDR) 3. bind(sk1, saddr, 0) 4. bind(sk2, saddr, 0) 5. connect(sk1, daddr) 6. listen(sk2) If it is set 1, we can fully utilize the 4-tuples, but we should use IP_BIND_ADDRESS_NO_PORT for bind()+connect() as possible. The notable thing is that if all sockets bound to the same port have both SO_REUSEADDR and SO_REUSEPORT enabled, we can bind sockets to an ephemeral port and also do listen(). Signed-off-by:
-
Kuniyuki Iwashima authored
When we get an ephemeral port, the relax is false, so the SO_REUSEADDR conditions may be evaluated twice. We do not need to check the conditions again. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - part 4 Convert more drivers following the groundwork laid in a recent patch set [1] and continued in [2], [3]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts 15 drivers in drivers/net/ethernet - remaining Intel drivers, Freescale/NXP, and others. 2 more conversion sets to come. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ [3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters (other than adaptive rx, which will now be rejected by core). Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Joe Perches authored
Converting fallthrough comments to fallthrough; creates warnings in this code when compiled with gcc. This code is overly complicated and reads rather better with a little refactoring and no fallthrough uses at all. Remove the fallthrough comments and simplify the written source code while reducing the object code size. Consolidate duplicated switch/case blocks for IPV4 and IPV6. defconfig x86-64 with sfc: $ size drivers/net/ethernet/sfc/ethtool.o* text data bss dec hex filename 10055 12 0 10067 2753 drivers/net/ethernet/sfc/ethtool.o.new 10135 12 0 10147 27a3 drivers/net/ethernet/sfc/ethtool.o.old Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Julian Wiedmann authored
This reverts commit 4cda7527 from net-next. Brown bag time. Michal noticed that this change doesn't work at all when netif_set_real_num_tx_queues() gets called prior to an initial dev_activate(), as for instance igb does. Doing so dies with: [ 40.579142] BUG: kernel NULL pointer dereference, address: 0000000000000400 [ 40.586922] #PF: supervisor read access in kernel mode [ 40.592668] #PF: error_code(0x0000) - not-present page [ 40.598405] PGD 0 P4D 0 [ 40.601234] Oops: 0000 [#1] PREEMPT SMP PTI [ 40.605909] CPU: 18 PID: 1681 Comm: wickedd Tainted: G E 5.6.0-rc3-ethnl.50-default #1 [ 40.616205] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013 [ 40.627377] RIP: 0010:qdisc_hash_add.part.22+0x2e/0x90 [ 40.633115] Code: 00 55 53 89 f5 48 89 fb e8 2f 9b fb ff 85 c0 74 44 48 8b 43 40 48 8b 08 69 43 38 47 86 c8 61 c1 e8 1c 48 83 e8 80 48 8d 14 c1 <48> 8b 04 c1 48 8d 4b 28 48 89 53 30 48 89 43 28 48 85 c0 48 89 0a [ 40.654080] RSP: 0018:ffffb879864934d8 EFLAGS: 00010203 [ 40.659914] RAX: 0000000000000080 RBX: ffffffffb8328d80 RCX: 0000000000000000 [ 40.667882] RDX: 0000000000000400 RSI: 0000000000000000 RDI: ffffffffb831faa0 [ 40.675849] RBP: 0000000000000000 R08: ffffa0752c8b9088 R09: ffffa0752c8b9208 [ 40.683816] R10: 0000000000000006 R11: 0000000000000000 R12: ffffa0752d734000 [ 40.691783] R13: 0000000000000008 R14: 0000000000000000 R15: ffffa07113c18000 [ 40.699750] FS: 00007f94548e5880(0000) GS:ffffa0752e980000(0000) knlGS:0000000000000000 [ 40.708782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.715189] CR2: 0000000000000400 CR3: 000000082b6ae006 CR4: 00000000001606e0 [ 40.723156] Call Trace: [ 40.725888] dev_qdisc_set_real_num_tx_queues+0x61/0x90 [ 40.731725] netif_set_real_num_tx_queues+0x94/0x1d0 [ 40.737286] __igb_open+0x19a/0x5d0 [igb] [ 40.741767] __dev_open+0xbb/0x150 [ 40.745567] __dev_change_flags+0x157/0x1a0 [ 40.750240] dev_change_flags+0x23/0x60 [...] Fixes: 4cda7527 ("net: sched: make newly activated qdiscs visible") Reported-by:
Michal Kubecek <mkubecek@suse.cz> CC: Michal Kubecek <mkubecek@suse.cz> CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Alex Elder authored
The definitions for the "qcom,smem-states" and "qcom,smem-state-names" properties need to list their "$ref" under an "allOf" keyword. In addition, fix two problems in the example at the end: - Use #include for header files that define needed symbolic values - Terminate the line that includes the "ipa-shared" register space name with a comma rather than a semicolon Finally, update some white space in the example for better alignment. Signed-off-by:Alex Elder <elder@linaro.org> Signed-off-by:
-
Davide Caratti authored
the following packetdrill script socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) > S 0:0(0) <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8,mpcapable v1 flags[flag_h] nokey> < S. 0:0(0) ack 1 win 65535 <mss 1460,sackOK,TS val 700 ecr 100,nop,wscale 8,mpcapable v1 flags[flag_h] key[skey=2]> > . 1:1(0) ack 1 win 256 <nop, nop, TS val 100 ecr 700,mpcapable v1 flags[flag_h] key[ckey,skey]> getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0 fcntl(3, F_SETFL, O_RDWR) = 0 write(3, ..., 1000) = 1000 doesn't transmit 1KB data packet after a successful three-way-handshake, using mp_capable with data as required by protocol v1, and write() hangs forever: PID: 973 TASK: ffff97dd399cae80 CPU: 1 COMMAND: "packetdrill" #0 [ffffa9b94062fb78] __schedule at ffffffff9c90a000 #1 [ffffa9b94062fc08] schedule at ffffffff9c90a4a0 #2 [ffffa9b94062fc18] schedule_timeout at ffffffff9c90e00d #3 [ffffa9b94062fc90] wait_woken at ffffffff9c120184 #4 [ffffa9b94062fcb0] sk_stream_wait_connect at ffffffff9c75b064 #5 [ffffa9b94062fd20] mptcp_sendmsg at ffffffff9c8e801c #6 [ffffa9b94062fdc0] sock_sendmsg at ffffffff9c747324 #7 [ffffa9b94062fdd8] sock_write_iter at ffffffff9c7473c7 #8 [ffffa9b94062fe48] new_sync_write at ffffffff9c302976 #9 [ffffa9b94062fed0] vfs_write at ffffffff9c305685 #10 [ffffa9b94062ff00] ksys_write at ffffffff9c305985 #11 [ffffa9b94062ff38] do_syscall_64 at ffffffff9c004475 #12 [ffffa9b94062ff50] entry_SYSCALL_64_after_hwframe at ffffffff9ca0008c RIP: 00007f959407eaf7 RSP: 00007ffe9e95a910 RFLAGS: 00000293 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f959407eaf7 RDX: 00000000000003e8 RSI: 0000000001785fe0 RDI: 0000000000000008 RBP: 0000000001785fe0 R8: 0000000000000000 R9: 0000000000000003 R10: 0000000000000007 R11: 0000000000000293 R12: 00000000000003e8 R13: 00007ffe9e95ae30 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Fix it ensuring that socket state is TCP_ESTABLISHED on reception of the third ack. Fixes: 1954b860 ("mptcp: Check connection state before attempting send") Suggested-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
