- 20 Jan, 2016 1 commit
-
-
Chris Mason authored
Merge branch 'misc-cleanups-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
-
- 19 Jan, 2016 1 commit
-
-
Colin Ian King authored
duplicate const is redundant so remove it Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- 15 Jan, 2016 3 commits
-
-
Dan Carpenter authored
If we return 1 here, then the caller treats it as an error and returns -EINVAL. It causes a static checker warning to treat positive returns as an error. Fixes: 1aba86d6 ('Btrfs: fix easily get into ENOSPC in mixed case') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Geliang Tang authored
Fix the following error: fs/btrfs/backref.c:565:1-20: iterator with update on line 577 Fixes: a7ca4225('btrfs: use list_for_each_entry* in backref.c') Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Jeff Mahoney authored
Overloading extent_map->bdev to struct map_lookup * might have started out as a means to an end, but it's a pattern that's used all over the place now. Let's get rid of the casting and just add a union instead. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
- 11 Jan, 2016 3 commits
-
-
Chris Mason authored
Merge branch 'for-chris-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.5 Signed-off-by:
Chris Mason <clm@fb.com>
-
Chris Mason authored
Merge branch 'misc-cleanups-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5 Signed-off-by:
-
Chris Mason authored
Merge branch 'misc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
-
- 07 Jan, 2016 31 commits
-
-
Filipe Manana authored
As of the 4.3 kernel release, the fitrim ioctl can now discard any region of a disk that is not allocated to any chunk/block group, including the first megabyte which is used for our primary superblock and by the boot loader (grub for example). Fix this by not allowing to trim/discard any region in the device starting with an offset not greater than min(alloc_start_mount_option, 1Mb), just as it was not possible before 4.3. A reproducer test case for xfstests follows. seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { cd / rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter # real QA test starts here _need_to_be_root _supported_fs btrfs _supported_os Linux _require_scratch rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 # Write to the [0, 64Kb[ and [68Kb, 1Mb[ ranges of the device. These ranges are # reserved for a boot loader to use (GRUB for example) and btrfs should never # use them - neither for allocating metadata/data nor should trim/discard them. # The range [64Kb, 68Kb[ is used for the primary superblock of the filesystem. $XFS_IO_PROG -c "pwrite -S 0xfd 0 64K" $SCRATCH_DEV | _filter_xfs_io $XFS_IO_PROG -c "pwrite -S 0xfd 68K 956K" $SCRATCH_DEV | _filter_xfs_io # Now mount the filesystem and perform a fitrim against it. _scratch_mount _require_batched_discard $SCRATCH_MNT $FSTRIM_PROG $SCRATCH_MNT # Now unmount the filesystem and verify the content of the ranges was not # modified (no trim/discard happened on them). _scratch_unmount echo "Content of the ranges [0, 64Kb] and [68Kb, 1Mb[ after fitrim:" od -t x1 -N $((64 * 1024)) $SCRATCH_DEV od -t x1 -j $((68 * 1024)) -N $((956 * 1024)) $SCRATCH_DEV status=0 exit Reported-by:Vincent Petry <PVince81@yahoo.fr> Reported-by:
Andrei Borzenkov <arvidjaar@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109341 Fixes: 499f377f (btrfs: iterate over unused chunk space in FITRIM) Cc: stable@vger.kernel.org # 4.3+ Signed-off-by:
Filipe Manana <fdmanana@suse.com>
-
Sam Tygier authored
When converting a filesystem via balance check that metadata mode is at least as redundant as the data mode. For example give warning when: -dconvert=raid1 -mconvert=single Signed-off-by:
Sam Tygier <samtygier@yahoo.co.uk> [ minor message reformatting ] Signed-off-by:
-
David Sterba authored
There is one ENOSPC case that's very confusing. There's Available greater than zero but no file operation succeds (besides removing files). This happens when the metadata are exhausted and there's no possibility to allocate another chunk. In this scenario it's normal that there's still some space in the data chunk and the calculation in df reflects that in the Avail value. To at least give some clue about the ENOSPC situation, let statfs report zero value in Avail, even if there's still data space available. Current: /dev/sdb1 4.0G 3.3G 719M 83% /mnt/test New: /dev/sdb1 4.0G 3.3G 0 100% /mnt/test We calculate the remaining metadata space minus global reserve. If this is (supposedly) smaller than zero, there's no space. But this does not hold in practice, the exhausted state happens where's still some positive delta. So we apply some guesswork and compare the delta to a 4M threshold. (Practically observed delta was 2M.) We probably cannot calculate the exact threshold value because this depends on the internal reservations requested by various operations, so some operations that consume a few metadata will succeed even if the Avail is zero. But this is better than the other way around. Signed-off-by: -
David Sterba authored
We can also preallocate btrfs_path that's used during pending snapshot creation and avoid another late ENOMEM failure. Signed-off-by: -
David Sterba authored
The actual snapshot creation is delayed until transaction commit. If we cannot get enough memory for the root item there, we have to fail the whole transaction commit which is bad. So we'll allocate the memory at the ioctl call and pass it along with the pending_snapshot struct. The potential ENOMEM will be returned to the caller of snapshot ioctl. Signed-off-by: -
David Sterba authored
We can allocate pending_snapshot earlier and do not have to do cleanup in case of failure. Signed-off-by: -
David Sterba authored
The values of btrfs_path::locks are 0 to 4, fit into a u8. Let's see: * overall size of btrfs_path drops down from 136 to 112 (-24 bytes), * better packing in a slab page +6 objects * the whole structure now fits to 2 cachelines * slight decrease in code size: text data bss dec hex filename 938731 43670 23144 1005545 f57e9 fs/btrfs/btrfs.ko.before 938203 43670 23144 1005017 f55d9 fs/btrfs/btrfs.ko.after (and the generated assembly does not change much) The main purpose is to decrease the size of the structure without affecting performance. The byte access is usually well behaving accross arches, the locks are not accessed frequently and sometimes just compared to zero. Note for further size reduction attempts: the slots could be made u16 but this might generate worse code on some arches (non-byte and non-int access). Also the range of operations on slots is wider compared to locks and the potential performance drop should be evaluated first. Signed-off-by: -
David Sterba authored
The level is 0..7, we can use smaller type. The size of btrfs_path is now 136 bytes from 144, which is +2 objects that fit into a 4k slab. Signed-off-by: -
David Sterba authored
The possible values for reada are all positive and bounded, we can later save some bytes by storing it in u8. Signed-off-by: -
David Sterba authored
Replace the integers by enums for better readability. The value 2 does not have any meaning since a7175319 "Btrfs: do less aggressive btree readahead" (2009-01-22). Signed-off-by:
-
David Sterba authored
There are a few statically initialized arrays that can be made const. The remaining (like file_system_type, sysfs attributes or prop handlers) do not allow that due to type mismatch when passed to the APIs or because the structures are modified through other members. Signed-off-by: -
David Sterba authored
* struct extent_io_ops * struct btrfs_free_space_op Signed-off-by: -
David Sterba authored
Preparatory work for making btrfs_free_space_op constant. In test_steal_space_from_bitmap_to_extent, we substitute use_bitmap with own version thus preventing constification. We can rework it so we replace the whole structure with the correct function pointers. Signed-off-by: -
Geliang Tang authored
Use list_for_each_entry*() to simplify the code. Signed-off-by:
-
Geliang Tang authored
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by:
-
Geliang Tang authored
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by:
-
Byongho Lee authored
We use many constants to represent size and offset value. And to make code readable we use '256 * 1024 * 1024' instead of '268435456' to represent '256MB'. However we can make far more readable with 'SZ_256MB' which is defined in the 'linux/sizes.h'. So this patch replaces 'xxx * 1024 * 1024' kind of expression with single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is not a power of 2. And I haven't touched to '4096' & '8192' because it's more intuitive than 'SZ_4KB' & 'SZ_8KB'. Signed-off-by:
Byongho Lee <bhlee.kernel@gmail.com> Signed-off-by:
-
David Sterba authored
Signed-off-by: -
Alexandru Moise authored
It's slightly cleaner to zero-out the delayed node upon allocation than to do it by hand in btrfs_init_delayed_node() for a few members Signed-off-by:
Alexandru Moise <00moses.alexander00@gmail.com> Signed-off-by:
-
Alexandru Moise authored
Signed-off-by:
-
Alexandru Moise authored
Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly returning boolean not int. Signed-off-by:
-
Byongho Lee authored
The inode argument is never used from the beginning, so remove it. Signed-off-by:
-
David Sterba authored
Although we prefer to use separate caches for various structs, it seems better not to do that for struct btrfs_delalloc_work. Objects of this type are allocated rarely, when transaction commit calls btrfs_start_delalloc_roots, requesting delayed iputs. The objects are temporary (with some IO involved) but still allocated and freed within __start_delalloc_inodes. Memory allocation failure is handled. The slab cache is empty most of the time (observed on several systems), so if we need to allocate a new slab object, the first one has to allocate a full page. In a potential case of low memory conditions this might fail with higher probability compared to using the generic slab caches. Signed-off-by: -
David Sterba authored
The helper btrfs_alloc_workqueue will add the "btrfs-" prefix. Signed-off-by: -
David Sterba authored
Signed-off-by: -
David Sterba authored
We can handle the special case of num_stripes == 0 directly inside btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to catch other unhandled cases where we fail to validate external data. A crafted or corrupted image crashes at mount time: BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0 BTRFS info (device loop0): disk space caching is enabled BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()! Kernel panic - not syncing: BUG! CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25 Stack: 637af890 60062489 602aeb2e 604192ba 60387961 00000011 637af8a0 6038a835 637af9c0 6038776b 634ef32b 00000000 Call Trace: [<6001c86d>] show_stack+0xfe/0x15b [<6038a835>] dump_stack+0x2a/0x2c [<6038776b>] panic+0x13e/0x2b3 [<6020f099>] btrfs_read_sys_array+0x25d/0x2ff [<601cfbbe>] open_ctree+0x192d/0x27af [<6019c2c1>] btrfs_mount+0x8f5/0xb9a [<600bc9a7>] mount_fs+0x11/0xf3 [<600d5167>] vfs_kern_mount+0x75/0x11a [<6019bcb0>] btrfs_mount+0x2e4/0xb9a [<600bc9a7>] mount_fs+0x11/0xf3 [<600d5167>] vfs_kern_mount+0x75/0x11a [<600d710b>] do_mount+0xa35/0xbc9 [<600d7557>] SyS_mount+0x95/0xc8 [<6001e884>] handle_syscall+0x6b/0x8e Reported-by:
Jiri Slaby <jslaby@suse.com> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> CC: stable@vger.kernel.org # 3.19+ Signed-off-by:
-
David Sterba authored
btrfs_delayed_extent_op can be packed in a better way, it's 40 bytes now and has 8 unused bytes. Reducing the level type to u8 makes it possible to squeeze it to the padding byte after key. The bitfields were switched to bool as there's space to store the full byte without increasing the whole structure, besides that the generated assembly is smaller. struct btrfs_delayed_extent_op { struct btrfs_disk_key key; /* 0 17 */ u8 level; /* 17 1 */ bool update_key; /* 18 1 */ bool update_flags; /* 19 1 */ bool is_data; /* 20 1 */ /* XXX 3 bytes hole, try to pack */ u64 flags_to_set; /* 24 8 */ /* size: 32, cachelines: 1, members: 6 */ /* sum members: 29, holes: 1, sum holes: 3 */ /* last cacheline: 32 bytes */ }; The final size is 32 bytes which gives +26 object per slab page. text data bss dec hex filename 938811 43670 23144 1005625 f5839 fs/btrfs/btrfs.ko.before 938747 43670 23144 1005561 f57f9 fs/btrfs/btrfs.ko.after Signed-off-by: -
David Sterba authored
Inodes for delayed iput allocate a trivial helper structure, let's place the list hook directly into the inode and save a kmalloc (killing a __GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode. The inode can be put into the delayed_iputs list more than once and we have to keep the count. This means we can't use the list_splice to process a bunch of inodes because we'd lost track of the count if the inode is put into the delayed iputs again while it's processed. Signed-off-by: -
Zhao Lei authored
Since we will add support for -d dup for non-mixed filesystem, kernel need to support converting to this raid-type. This patch remove limitation of above case. Tested by following script: (combination of dup conversion with fsck): export TEST_DEV='/dev/vdc' export TEST_DIR='/var/ltf/tester/mnt' do_dup_test() { local m_from="$1" local d_from="$2" local m_to="$3" local d_to="$4" echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to" umount "$TEST_DIR" &>/dev/null ./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1 mount "$TEST_DEV" "$TEST_DIR" || return 1 cp -a /sbin/* "$TEST_DIR" [[ "$m_from" != "$m_to" ]] && { ./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1 } [[ "$d_from" != "$d_to" ]] && { local opt=() [[ "$d_to" == single ]] && opt+=("-f") ./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1 } umount "$TEST_DIR" || return 1 ./btrfsck "$TEST_DEV" || return 1 echo return 0 } test_all() { for m_from in single dup; do for d_from in single dup; do for m_to in single dup; do for d_to in single dup; do do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1 done done done done } test_all Signed-off-by:Zhao Lei <zhaolei@cn.fujitsu.com> Reviewed-by:
-
Josef Bacik authored
We hit this panic on a few of our boxes this week where we have an ordered_extent with an NULL inode. We do an igrab() of the inode in writepages, but weren't doing it in writepage which can be called directly from the VM on dirty pages. If the inode has been unlinked then we could have I_FREEING set which means igrab() would return NULL and we get this panic. Fix this by trying to igrab in btrfs_writepage, and if it returns NULL then just redirty the page and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Anand Jain authored
Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
- 06 Jan, 2016 1 commit
-
-
Filipe Manana authored
If we failed to create a hard link we were not always releasing the the transaction handle we got before, resulting in a memory leak and preventing any other tasks from being able to commit the current transaction. Fix this by always releasing our transaction handle. Signed-off-by:
-
