Cleanups on various subarchitectures

Cleanup patches for various ARM platforms and some of their associated
drivers, the bulk of these is for mach-91.

Arnd ended up pulling in the restart branch from Russell in order to
fix up some simple but annoying merge conflicts.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  arm/at91: fix build of stamp9g20
  ARM: u300: delete memory.h
  MAINTAINERS: add maintainer entry for Picochip picoxcell
  ARM: picoxcell: move io mappings to common.c
  ARM: picoxcell: don't reserve irq_descs
  ARM: picoxcell: remove mach/memory.h
  ARM: at91: delete the pcontrol_g20_defconfig
  arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC
  arm/tegra: remove unused defines
  arm/tegra: fix variable formatting in makefile
  ARM: davinci: vpif: move code to driver core header from platform
  ARM: at91/gpio: fix display of number of irq setuped
  ARM: at91/gpio: drop PIN_BASE
  ARM: at91/udc: use gpio_is_valid to check the gpio
  ARM: at91/ohci: use gpio_is_valid to check the gpio
  ARM: at91/nand: use gpio_is_valid to check the gpio
  ARM: at91/mmc: use gpio_is_valid to check the gpio
  ARM: at91/ide: use gpio_is_valid to check the gpio
  ARM: at91/pata: use gpio_is_valid to check the gpio
  ARM: at91/soc: use gpio_is_valid to check the gpio
  ...

Non-critical bug fixes

Simple bug fixes that were not considered important enough for inclusion
into 3.2.

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: update pxa and mmp
  ARM: pxa: Include linux/export.h in balloon3.c
  ARM: OMAP4: clock: Add CPU local timer clock node
  ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
  ARM: OMAP: AM3517/3505: fix crash on boot due to incorrect voltagedomain data
  ARM: OMAP: hwmod data: fix the panic on Nokia RM-680 during boot
  ARM: OMAP2+: DMA: Workaround for invalid destination position
  ARM: OMAP2+: DMA: Workaround for invalid source position

Including trace/events/*.h TRACE_EVENT() macro headers in other headers
can cause strange side effects if another trace/event/*.h header
includes that header.  Having trace/events/kmem.h inside slab_def.h
caused a compile error in sparc64 when changes were done to some header
files.  Moving the kmem.h trace header out of slab.h and into slab.c
fixes the problem.

Note, both slub.c and slob.c already include the trace/events/kmem.h
file. Only slab.c had it missing.

Link: http://lkml.kernel.org/r/20120105190405.1e3191fb5a43b2a0f1655e1f@canb.auug.org.auReported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Remove irqsafe_cpu_xxx variants

Fix up conflict in arch/x86/include/asm/percpu.h due to clash with
cebef5be ("x86: Fix and improve percpu_cmpxchg{8,16}b_double()")
which edited the (now removed) irqsafe_cpu_cmpxchg*_double code.

* 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  cgroup: fix to allow mounting a hierarchy by name
  cgroup: move assignement out of condition in cgroup_attach_proc()
  cgroup: Remove task_lock() from cgroup_post_fork()
  cgroup: add sparse annotation to cgroup_iter_start() and cgroup_iter_end()
  cgroup: mark cgroup_rmdir_waitq and cgroup_attach_proc() as static
  cgroup: only need to check oldcgrp==newgrp once
  cgroup: remove redundant get/put of task struct
  cgroup: remove redundant get/put of old css_set from migrate
  cgroup: Remove unnecessary task_lock before fetching css_set on migration
  cgroup: Drop task_lock(parent) on cgroup_fork()
  cgroups: remove redundant get/put of css_set from css_set_check_fetched()
  resource cgroups: remove bogus cast
  cgroup: kill subsys->can_attach_task(), pre_attach() and attach_task()
  cgroup, cpuset: don't use ss->pre_attach()
  cgroup: don't use subsys->can_attach_task() or ->attach_task()
  cgroup: introduce cgroup_taskset and use it in subsys->can_attach(), cancel_attach() and attach()
  cgroup: improve old cgroup handling in cgroup_attach_proc()
  cgroup: always lock threadgroup during migration
  threadgroup: extend threadgroup_lock() to cover exit and exec
  threadgroup: rename signal->threadgroup_fork_lock to ->group_rwsem
  ...

Fix up conflict in kernel/cgroup.c due to commit e0197aae: "cgroups:
fix a css_set not found bug in cgroup_attach_proc" that already
mentioned that the bug is fixed (differently) in Tejun's cgroup
patchset. This one, in other words.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2/3/4: delete unneeded includes of module.h
  ext{3,4}: Fix potential race when setversion ioctl updates inode
  udf: Mark LVID buffer as uptodate before marking it dirty
  ext3: Don't warn from writepage when readonly inode is spotted after error
  jbd: Remove j_barrier mutex
  reiserfs: Force inode evictions before umount to avoid crash
  reiserfs: Fix quota mount option parsing
  udf: Treat symlink component of type 2 as /
  udf: Fix deadlock when converting file from in-ICB one to normal one
  udf: Cleanup calling convention of inode_getblk()
  ext2: Fix error handling on inode bitmap corruption
  ext3: Fix error handling on inode bitmap corruption
  ext3: replace ll_rw_block with other functions
  ext3: NULL dereference in ext3_evict_inode()
  jbd: clear revoked flag on buffers before a new transaction started
  ext3: call ext3_mark_recovery_complete() when recovery is really needed

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  ore: Must support none-PAGE-aligned IO
  ore: fix BUG_ON, too few sgs when reading
  ore: Fix crash in case of an IO error.
  ore: FIX breakage when MISC_FILESYSTEMS is not set

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix endian conversion issue in discard code

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (466 commits)
  net/hyperv: Add support for jumbo frame up to 64KB
  net/hyperv: Add NETVSP protocol version negotiation
  net/hyperv: Remove unnecessary kmap_atomic in netvsc driver
  staging/rtl8192e: Register against lib80211
  staging/rtl8192e: Convert to lib80211_crypt_info
  staging/rtl8192e: Convert to lib80211_crypt_data and lib80211_crypt_ops
  staging/rtl8192e: Add lib80211.h to rtllib.h
  staging/mei: add watchdog device registration wrappers
  drm/omap: GEM, deal with cache
  staging: vt6656: int.c, int.h: Change return of function to void
  staging: usbip: removed unused definitions from header
  staging: usbip: removed dead code from receive function
  staging:iio: Drop {mark,unmark}_in_use callbacks
  staging:iio: Drop buffer mark_param_change callback
  staging:iio: Drop the unused buffer enable() and is_enabled() callbacks
  staging:iio: Drop buffer busy flag
  staging:iio: Make sure a device is only opened once at a time
  staging:iio: Disallow modifying buffer size when buffer is enabled
  staging:iio: Disallow changing scan elements in all buffered modes
  staging:iio: Use iio_buffer_enabled instead of open coding it
  ...

Fix up conflict in drivers/staging/iio/adc/ad799x_core.c (removal of
module_init due to using module_i2c_driver() helper, next to removal of
MODULE_ALIAS due to using MODULE_DEVICE_TABLE instead).

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits)
  USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
  xhci: Clean up 32-bit build warnings.
  USB: update documentation for usbmon
  usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
  drivers/usb/class/cdc-acm.c: clear dangling pointer
  drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  drivers/usb/host/isp1760-if.c: introduce missing kfree
  usb: option: add ZD Incorporated HSPA modem
  usb: ch9: fix up MaxStreams helper
  USB: usb-skeleton.c: cleanup open_count
  USB: usb-skeleton.c: fix open/disconnect race
  xhci: Properly handle COMP_2ND_BW_ERR
  USB: remove dead code from suspend/resume path
  USB: add quirk for another camera
  drivers: usb: wusbcore: Fix dependency for USB_WUSB
  xhci: Better debugging for critical host errors.
  xhci: Be less verbose during URB cancellation.
  xhci: Remove debugging about ring structure allocation.
  xhci: Remove debugging about toggling cycle bits.
  xhci: Remove debugging for individual transfers.
  ...

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
  tty: serial: imx: move del_timer_sync() to avoid potential deadlock
  imx: add polled io uart methods
  imx: Add save/restore functions for UART control regs
  serial/imx: let probing fail for the dt case without a valid alias
  serial/imx: propagate error from of_alias_get_id instead of using -ENODEV
  tty: serial: imx: Allow UART to be a source for wakeup
  serial: driver for m32 arch should not have DEC alpha errata
  serial/documentation: fix documented name of DCD cpp symbol
  atmel_serial: fix spinlock lockup in RS485 code
  tty: Fix memory leak in virtual console when enable unicode translation
  serial: use DIV_ROUND_CLOSEST instead of open coding it
  serial: add support for 400 and 800 v3 series Titan cards
  serial: bfin-uart: Remove ASYNC_CTS_FLOW flag for hardware automatic CTS.
  serial: bfin-uart: Enable hardware automatic CTS only when CTS pin is available.
  serial: make FSL errata depend on 8250_CONSOLE, not just 8250
  serial: add irq handler for Freescale 16550 errata.
  serial: manually inline serial8250_handle_port
  serial: make 8250 timeout use the specified IRQ handler
  serial: export the key functions for an 8250 IRQ handler
  serial: clean up parameter passing for 8250 Rx IRQ handling
  ...

* 'char-misc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  isl29020: Remove a redundant semi-colon from return statement
  BMP085: Remove redundant semi-colon from return statement
  drivers:misc: ti-st: DEBUG uart, baud rate mods
  drivers:misc: ti-st: flush UART upon fw failure
  drivers:misc: ti-st: protect registrations
  char_dev.c: fix up some whitespace errors
  s390: tape_class.h: remove kobj_map.h inclusion
  misc: ad525x_dpot: Add support for SPI module device table matching

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ext[34]: avoid i_nlink warnings triggered by drop_nlink/inc_nlink kludge in symlink()
  exofs: oops after late failure in mount
  devpts: fix double-free on mount failure
  ... and the same for gadgetfs
  functionfs: unfuck failure exits on mount

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
  [S390] disassembler: mark exception causing instructions
  [S390] Enable exception traces by default
  [S390] return address of compat signals
  [S390] sysctl: get rid of dead declaration
  [S390] dasd: fix fixpoint divide exception in define_extent
  [S390] dasd: add sanity check to detect path connection error
  [S390] qdio: fix kernel panic for zfcp 31-bit
  [S390] Add s390x description to Documentation/kdump/kdump.txt
  [S390] Add VMCOREINFO_SYMBOL(high_memory) to vmcoreinfo
  [S390] dasd: fix expiration handling for recovery requests
  [S390] outstanding interrupts vs. smp_send_stop
  [S390] ipc: call generic sys_ipc demultiplexer
  [S390] zcrypt: Fix error return codes.
  [S390] zcrypt: Rework length parameter checking.
  [S390] cleanup trap handling
  [S390] Remove Kerntypes leftovers
  [S390] topology: increase poll frequency if change is anticipated
  [S390] entry[64].S improvements
  [S390] make arch/s390 subdirectories depend on config option
  [S390] kvm: move cmf host id constant out of lowcore
  ...

Fix up conflicts in arch/s390/kernel/{smp.c,topology.c} due to the
sysdev removal clashing with "topology: get rid of ifdefs" which moved
some of that code around.

Delete any instances of include module.h that were not strictly
required.  In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>

The EXT{3,4}_IOC_SETVERSION ioctl() updates i_ctime and i_generation
without i_mutex. This can lead to a race with the other operations that
update i_ctime. This is not a big issue but let's make the ioctl consistent
with how we handle e.g. other timestamp updates and use i_mutex to protect
inode changes.
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

When we hit EIO while writing LVID, the buffer uptodate bit is cleared.
This then results in an anoying warning from mark_buffer_dirty() when we
write the buffer again. So just set uptodate flag unconditionally.
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is
remounted read-only. This unnecessarily scares users (well, they should be
scared because of filesystem error, but the stack trace distracts them from the
right source of their fear ;-). We could as well just remove the WARN_ON but
it's not hard to fix it to not trip on filesystem with errors and not use more
cycles in the common case so that's what we do.

CC: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>

j_barrier mutex is used for serializing different journal lock operations.  The
problem with it is that e.g. FIFREEZE ioctl results in process leaving kernel
with j_barrier mutex held which makes lockdep freak out. Also hibernation code
wants to freeze filesystem but it cannot do so because it then cannot hibernate
the system because of mutex being locked.

So we remove j_barrier mutex and use direct wait on j_barrier_count instead.
Since locking journal is a rare operation we don't have to care about fairness
or such things.

CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Jan Kara <jack@suse.cz>

This patch fixes a crash in reiserfs_delete_xattrs during umount.

When shrink_dcache_for_umount clears the dcache from
generic_shutdown_super, delayed evictions are forced to disk. If an
evicted inode has extended attributes associated with it, it will
need to walk the xattr tree to locate and remove them.

But since shrink_dcache_for_umount will BUG if it encounters active
dentries, the xattr tree must be released before it's called or it will
crash during every umount.

This patch forces the evictions to occur before generic_shutdown_super
by calling shrink_dcache_sb first. The additional evictions caused
by the removal of each associated xattr file and dir will be automatically
handled as they're added to the LRU list.

CC: reiserfs-devel@vger.kernel.org
CC: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>

When jqfmt mount option is not specified on remount, we mistakenly clear
s_jquota_fmt value stored in superblock. Fix the problem.

CC: stable@kernel.org
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>

Currently, we ignore symlink component of type 2. But mkisofs and other OS'
seem to treat it as / so do the same for compatibility.
Reported-by: "Gábor S." <otnaccess@hotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

During BKL removal in 2.6.38, conversion of files from in-ICB format to normal
format got broken. We call ->writepage with i_data_sem held but udf_get_block()
also acquires i_data_sem thus creating A-A deadlock.

We fix the problem by dropping i_data_sem before calling ->writepage() which is
safe since i_mutex still protects us against any changes in the file. Also fix
pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping
i_data_sem before calling find_or_create_page().

CC: stable@kernel.org
Reported-by: Matthias Matiak <netzpython@mail-on.us>
Tested-by: Matthias Matiak <netzpython@mail-on.us>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

inode_getblk() always returned NULL and passed results in its parameters.
Make the function return something useful - found block number.
Signed-off-by: Jan Kara <jack@suse.cz>

When insert_inode_locked() fails in ext2_new_inode() it most likely means inode
bitmap got corrupted and we allocated again inode which is already in use. Also
doing unlock_new_inode() during error recovery is wrong since the inode does
not have I_NEW set. Fix the problem by informing about filesystem error and
jumping to fail: (instead of fail_drop:) which doesn't call unlock_new_inode().
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>

When insert_inode_locked() fails in ext3_new_inode() it most likely
means inode bitmap got corrupted and we allocated again inode which
is already in use. Also doing unlock_new_inode() during error recovery
is wrong since inode does not have I_NEW set. Fix the problem by jumping
to fail: (instead of fail_drop:) which declares filesystem error and
does not call unlock_new_inode().
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ll_rw_block() is deprecated. Thus we replace it with other functions.

CC: Jan Kara <jack@suse.cz>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Both ext3 and ext4 put the half-created symlink inode into the orphan list
for a while (see the comment in ext[34]_symlink() for gory details).  Then,
if everything went fine, they pull it out of the orphan list and bump the
link count back to 1.  The thing is, inc_nlink() is going to complain about
seeing somebody changing i_nlink from 0 to 1.  With a good reason, since
normally something like that is a bug.  Explicit set_nlink(inode, 1) does
the same thing as inc_nlink() here, but it does *not* complain - exactly
because it should be usable in strange situations like this one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We have already set ->s_root, so ->put_super() is going to be called.
Freeing ->s_fs_info is a bloody bad idea when it's going to be
dereferenced very shortly...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

devpts_kill_sb() is called even if devpts_fill_super() fails;
we should not do that kfree() in the latter, especially not
with ->s_fs_info left pointing to freed object.  Double kfree()
is a Bad Thing(tm)...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* if you do dput() of root dentry, do *not* follow that with iput() of root
inode.
* while we are at it, don't do that dput() at all - you are leaving the pointer
in ->s_root and your ->kill_sb() will be very unhappy with that.  It will do
proper dput(), though, so the easiest way is to leave that to it entirely.
* freeing ->s_fs_info is also best left to ->kill_sb() (which will do it
anyway), especially since we leave the pointer in place.
* that xchg() in ->kill_sb() is not a bug per se, but it's a plain and simple
masturbation with fewer excuses than Onan had...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

A call to va_copy() should always be followed by a call to va_end() in
the same function.  In kernel/autit.c::audit_log_vformat() this is not
always done.  This patch makes sure va_end() is always called.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :

We allocate memory:

	...
	struct user_sgmap* usg;
	usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
	  + sizeof(struct sgmap), GFP_KERNEL);

and then neglect to free it:

	...
	for (i = 0; i < usg->count; i++) {
		u64 addr;
		void* p;
		if (usg->sg[i].count >
		    ((dev->adapter_info.options &
		     AAC_OPT_NEW_COMM) ?
		      (dev->scsi_host_ptr->max_sectors << 9) :
		      65536)) {
			rcode = -EINVAL;
			goto cleanup;
	... this 'goto' makes 'usg' go out of scope and leak the memory we
	    allocated.

Other exits properly kfree(usg), it's just here it is neglected.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

infiniband changes for 3.3 merge window

* tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  rdma/core: Fix sparse warnings
  RDMA/cma: Fix endianness bugs
  RDMA/nes: Fix terminate during AE
  RDMA/nes: Make unnecessarily global nes_set_pau() static
  RDMA/nes: Change MDIO bus clock to 2.5MHz
  IB/cm: Fix layout of APR message
  IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE
  IB/qib: Default some module parameters optimally
  IB/qib: Optimize locking for get_txreq()
  IB/qib: Fix a possible data corruption when receiving packets
  IB/qib: Eliminate 64-bit jiffies use
  IB/qib: Fix style issues
  IB/uverbs: Protect QP multicast list

* 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linux:
  dma-buf: mark EXPERIMENTAL for 1st release.
  dma-buf: Documentation for buffer sharing framework
  dma-buf: Introduce dma buffer sharing mechanism

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  max1111.c: fix checkpatch warning
  hwmon: (lm75) fix checkpatch warnings
  hwmon: (lm80) fix checkpatch messages
  hwmon: replaced strict_str* with kstr*
  hwmon: (lm75) fix checkpatch warning
  hwmon: (lm75) added error handling
  hwmon: (ltc4261) set data->valid to 0 if error
  hwmon: (f75375s) Add support for F75387SG/RG
  hwmon: (f75375s) Disable setting DC fan control mode for F75373
  hwmon: (f75375s) Initialize pwmX_mode and pwmX_enable if there is no platform data
  hwmon: (f75375s) Fix value range for PWM modes
  hwmon: (f75375s) Use standard sysfs attribute names
  hwmon: (f75375s) Fix checkpatch errors and warnings
  hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabled
  hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]
  hwmon: (pmbus/zl6100) Add support for ZL2005
  hwmon: (pmbus/adm1275) Validate device ID

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (36 commits)
  mfd: Clearing events requires event registers to be writable for da9052-core
  mfd: Fix annotations in da9052-core
  gpiolib: Mark da9052 driver broken
  mfd: Declare da9052_regmap_config for the bus drivers
  MFD: DA9052/53 MFD core module add SPI support v2
  MFD: DA9052/53 MFD core module
  regmap: Add irq_base accessor to regmap_irq
  regmap: Allow drivers to reinitialise the register cache at runtime
  regmap: Add trace event for successful cache reads
  regmap: Allow regmap_update_bits() users to detect changes
  regmap: Report if we actually handled an interrupt in regmap-irq
  regmap: Fix rbtreee build when not using debugfs
  regmap: Provide debugfs dump of the rbtree cache data
  regmap: Do debugfs init before cache init
  regmap: Suppress noop writes in regmap_update_bits()
  regmap: Remove indexed cache type
  regmap: Drop check whether a register is readable in regcache_read
  regmap: Properly round cache_word_size
  regmap: Add support for 10/14 register formating
  regmap: Try cached read before checking if a hardware read is possible
  ...

md update for 3.3

Big change is new hot-replacement.
A slot in an array can hold 2 devices - one that
wants-replacement and one that is the replacement.
Once the replacement is built - either from the
original or (in the case of errors) from elsewhere,
the wants-replacement device will be removed.

* tag 'md-3.3' of git://neil.brown.name/md: (36 commits)
  md/raid1: Mark device want_replacement when we see a write error.
  md/raid1: If there is a spare and a want_replacement device, start replacement.
  md/raid1: recognise replacements when assembling arrays.
  md/raid1: handle activation of replacement device when recovery completes.
  md/raid1: Allow a failed replacement device to be removed.
  md/raid1: Allocate spare to store replacement devices and their bios.
  md/raid1:  Replace use of mddev->raid_disks with conf->raid_disks.
  md/raid10: If there is a spare and a want_replacement device, start replacement.
  md/raid10: recognise replacements when assembling array.
  md/raid10: Allow replacement device to be replace old drive.
  md/raid10: handle recovery of replacement devices.
  md/raid10:  Handle replacement devices during resync.
  md/raid10: writes should get directed to replacement as well as original.
  md/raid10: allow removal of failed replacement devices.
  md/raid10: preferentially read from replacement device if possible.
  md/raid10:  change read_balance to return an rdev
  md/raid10: prepare data structures for handling replacement.
  md/raid5: Mark device want_replacement when we see a write error.
  md/raid5: If there is a spare and a want_replacement device, start replacement.
  md/raid5: recognise replacements when assembling array.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)