Merge tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC update for 5.10:

- A series from Fabio Estevam to remove legacy non-DT i.MX platforms
  support and related board files. This is a natural move, as the
  platforms had been converted to DT for years, and we have not seen
  any users around these legacy non-DT support for a while.
- Enable cpufreq support for i.MX7ULP platform.

* tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: imx: Remove remnant board file support pieces
  ARM: imx: Remove imx device directory
  ARM: imx: Remove iomux-v3 board code
  ARM: imx3: Remove imx3 soc_init()
  ARM: imx31: Remove remaining i.MX31 board code
  ARM: imx27: Retrieve AVIC base address from devicetree
  ARM: imx27: Get rid of mm-imx27.c
  ARM: imx27: Remove iomux-v1 board code
  ARM: imx27: Remove imx27_soc_init()
  ARM: imx7ulp: enable cpufreq
  ...

Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Hisilicon ARM SoC updates for v5.10

- Add SD5203 SoC support which core is ARM926EJ-S
- Add Low-level debugging support for SD5203

* tag 'hisi-arm-soc-for-5.10' of git://github.com/hisilicon/linux-hisi:
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC

Link: https://lore.kernel.org/r/5F742928.2060202@hisilicon.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.10/soc-part2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

One more SoC change for omaps for v5.10 merge window

Remove debugfs dependency for enabling off mode during idle
for omap3 by enabling it automatically based on the PMIC
configuration.

* tag 'omap-for-v5.10/soc-part2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap3: enable off mode automatically

Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v5.10/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc

This pull request contains a patch that shifts to using new simplified
i2c driver probe method inside mach-davinci (i2c_driver->probe_new())

* tag 'davinci-for-v5.10/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: use simple i2c probe function

Link: https://lore.kernel.org/r/83eff002-5247-4fb6-33b4-ce7cec3d2d5c@ti.comSigned-off-by: Olof Johansson <olof@lixom.net>

MediaTek recently introduced support for the MStar interrupt
controller that is also present in some of their chips as well
as the MStar/Sigmastar chips.

Almost all of the peripheral interrupts go through an instance of
this controller in MStar/SigmaStar Arm v7 chips so we want to select
it if CONFIG_ARCH_MSTARV7 is selected.

Link: https://lore.kernel.org/r/20201002133418.2250277-2-daniel@0x0f.comSigned-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Link: https://lore.kernel.org/r/20200924101113.4528-1-alexandre.torgue@st.comSigned-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add support of early console for SD5203.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Enable support for the Hisilicon SD5203 SoC. The core is ARM926EJ-S.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.10

1. Clear unneeded L2C-310 flag which presenc was triggering warning
   message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
   Maintainers.

* tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-soc-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc

Renesas ARM SoC updates for v5.10

  - Make two local functions static.

* tag 'renesas-arm-soc-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: rcar-gen2: Make rcar_gen2_{timer_init, reserve}() static

Link: https://lore.kernel.org/r/20200918124800.15555-3-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

AT91 SoC for 5.10

 - ULP0 fast wakeup support
 - PM cleanups

* tag 'at91-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: pm: remove unnecessary at91sam9x60_idle
  ARM: at91: pm: of_node_put() after its usage
  ARM: at91: pm: add per soc validation of pm modes
  ARM: at91: pm: add support for ULP0 fast wakeup

Link: https://lore.kernel.org/r/20200916211119.GA275438@piout.netSigned-off-by: Olof Johansson <olof@lixom.net>

Enabling off mode was only reachable deeply hidden
in the debugfs. As powersaving is an important feature,
move the option out of its shady place.
The debugfs file can still be used to override the default.

Use the presence of a device compatible to ti,twl4030-idle or
ti,twl4030-idle-osc-off as an indicator that the board is wired correctly
for off mode.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
[tony@atomide.com: updated to fix a checkpatch warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>

mx35_clocks_init() has been used to register clocks on i.MX35
non-devicetree platforms.

Now that i.MX is a devicetree-only platform, it is safe to
remove mx35_clocks_init() as there are no more users.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

mx31_clocks_init() has been used to register clocks on i.MX31
non-devicetree platforms.

Now that i.MX is a devicetree-only platform, it is safe to
remove mx31_clocks_init() as there are no more users.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

mx27_clocks_init() has been used to register clocks on i.MX27
non-devicetree platforms.

Now that i.MX is a devicetree-only platform, it is safe to
remove mx27_clocks_init() as there are no more users.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Most of the definitions for peripheral base addresses, interrupt and
DMA information is no longer used, so get rid of them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx35 has been converted to a devicetree-only platform,
retrieve the IIM base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx31 and imx35 has been converted to a devicetree-only platform,
retrieve the AVIC base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx31 and imx35 has been converted to a devicetree-only platform,
retrieve the CCM base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx31 has been converted to a devicetree-only platform,
retrieve the IIM base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx27 has been converted to a devicetree-only platform,
retrieve the CCM base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx27 has been converted to a devicetree-only platform,
retrieve the SYSCTRL base address from devicetree.

To keep devicetree compatibilty the SYSCTRL base address will be
retrieved from the CCM base address plus an 0x800 offset.

This is not a problem as the imx27.dtsi describes the CCM register
range as 0x1000.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Documentation references notes from a removed debug-macro.S file so
bring the contents here.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200911143343.498-3-krzk@kernel.org

If S3C24xx machine code is build without CONFIG_MMU, the iotable()
macros do nothing so annotate structures to get rid of warnings:

  arch/arm/mach-s3c24xx/common.c:140:24: warning: ‘s3c_iodesc’ defined but not used [-Wunused-variable]
  arch/arm/mach-s3c24xx/s3c2410.c:49:24: warning: ‘s3c2410_iodesc’ defined but not used [-Wunused-variable]
  arch/arm/mach-s3c24xx/s3c2412.c:60:24: warning: ‘s3c2412_iodesc’ defined but not used [-Wunused-variable]
  arch/arm/mach-s3c24xx/s3c2416.c:54:24: warning: ‘s3c2416_iodesc’ defined but not used [-Wunused-variable]
  arch/arm/mach-s3c24xx/s3c2443.c:45:24: warning: ‘s3c2443_iodesc’ defined but not used [-Wunused-variable]
  arch/arm/mach-s3c24xx/s3c244x.c:44:24: warning: ‘s3c244x_iodesc’ defined but not used [-Wunused-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200910154150.3318-2-krzk@kernel.org

Selecting CONFIG_SAMSUNG_PM_DEBUG (depending on CONFIG_DEBUG_LL) but
without CONFIG_MMU leads to build errors:

  arch/arm/plat-samsung/pm-debug.c: In function ‘s3c_pm_uart_base’:
  arch/arm/plat-samsung/pm-debug.c:57:2: error:
    implicit declaration of function ‘debug_ll_addr’ [-Werror=implicit-function-declaration]

Fixes: 99b2fc2b ("ARM: SAMSUNG: Use debug_ll_addr() to get UART base address")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200910154150.3318-1-krzk@kernel.org

In fifteen entries mentioning linux-samsung-soc@vger.kernel.org in
MAINTAINERS, seven entries mention the list being moderated for
non-subscribers and eight entries do not. Clearly only one can be right,
though.

Joe Perches suggested that all vger.kernel.org are not moderated for
non-subscribers.

Remove all the remarks from the entries following Joe's suggestion.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/lkml/da6f30896a8fd78635b3ca454d77a5292a9aa76d.camel@perches.com/
Link: https://lore.kernel.org/r/20200914061353.17535-1-lukas.bulwahn@gmail.comSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:

- Florian adds debug UART entries for the 72164 and 72165 SoCs and
  updates ARCH_BRCMSTB to select CONFIG_BCM7038_L1_IRQ which is an
  interrupt controller used with the 7211 chip family

* tag 'arm-soc/for-5.10/soc' of https://github.com/Broadcom/stblinux:
  ARM: brcmstb: Add debug UART entry for 72615
  ARM: bcm: Enable BCM7038_L1_IRQ for ARCH_BRCMSTB
  ARM: brcmstb: Add debug UART entry for 72614

Link: https://lore.kernel.org/r/20200912032153.1216354-5-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom SoCs changes to the MAINTAINERS file
for 5.10, please pull the following:

- Christian updates the BCM5301x (Northstar) section to cover additional
  files added for the Cisco Meraki MR32

* tag 'arm-soc/for-5.10/maintainers' of https://github.com/Broadcom/stblinux:
  MAINTAINERS: extend BCM5301X ARM ARCHITECTURE files

Link: https://lore.kernel.org/r/20200912032153.1216354-4-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.10/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

Add initial genpd support for omaps to drop more platform data

We now drop legacy platform data for RTC on am3, am4 and dra7.
And we add initial genpd support for PRM (Power and Reset Manager)
and use it to drop legacy platform data for am3 sgx and omap4/5
l4_abe interconnect instance.

* tag 'omap-for-v5.10/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Drop legacy platform data for dra7 rtcss
  ARM: OMAP2+: Drop legacy platform data for am3 and am4 rtc
  soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data
  ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data
  ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data
  soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
  soc: ti: omap-prm: Configure sgx power domain for am3 and am4
  soc: ti: omap-prm: Add basic power domain support
  dt-bindings: omap: Update PRM binding for genpd

Link: https://lore.kernel.org/r/pull-1599132307-761202@atomide.com-2Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

SoC changes for omaps for v5.10

Few changes to replace HTTP links with HTTPS, and a change to
delete a duplicate word for omap1 mux.h comments.

* tag 'omap-for-v5.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm: mach-omap1: mux.h: delete duplicate word
  ARM: OMAP2+: Replace HTTP links with HTTPS ones
  ARM: OMAP2+: pm33xx-core: Replace HTTP links with HTTPS ones
  ARM: OMAP2+: hwmod: Replace HTTP links with HTTPS ones
  ARM: OMAP2+: Replace HTTP links with HTTPS ones
  ARM: OMAP2+: PRM: Replace HTTP links with HTTPS ones

Link: https://lore.kernel.org/r/pull-1599132307-761202@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'versatile-soc-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/soc

Versatile SoC updates for the v5.10 kernel cycle:

- Drop a static qualifier in integrator_soc_init()
- Remove Integrator and Versatile from PHYS_OFFSET

* tag 'versatile-soc-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: versatile: Remove Integrator and Realview from PHYS_OFFSET
  soc: integrator: Drop pointless static qualifier in integrator_soc_init()

Link: https://lore.kernel.org/r/CACRpkdYYDSg8FAjJAqew5yEu7H1Y3E1rPN9TL25K31T=QWATuA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung S3C24xx and S3C64xx machine code cleanup for v5.10

Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos.  This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.

The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform.  The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory.  However this is step forward for multiplatform or at least
to keep this code still maintainable.

This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.

* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
  ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
  ARM: s3c: Cleanup from old plat-samsung include
  ARM: s3c: make headers local if possible
  ARM: s3c: move into a common directory
  ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
  cpufreq: s3c24xx: move low-level clk reg access into platform code
  cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
  ARM: s3c: remove cpufreq header dependencies
  cpufreq: s3c24xx: split out registers
  fbdev: s3c2410fb: remove mach header dependency
  ARM: s3c24xx: bast: avoid irq_desc array usage
  ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
  ARM: s3c24xx: include mach/irqs.h where needed
  ARM: s3c24xx: move s3cmci pinctrl handling into board files
  ARM: s3c24xx: move iis pinctrl config into boards
  ARM: s3c24xx: move spi fiq handler into platform
  ARM: s3c: adc: move header to linux/soc/samsung
  ARM: s3c24xx: move irqchip driver back into platform
  ARM: s3c24xx: move regs-spi.h into spi driver
  ARM: s3c64xx: remove mach/hardware.h
  ...

Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Since i.MX board files are gone, remove some remnant pieces of
board file support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/mach-imx/devices/ contains utilities for registering devices
in board file. Now that board files are gone, get rid of the devices
directory.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

IMX_HAVE_IOMUX_V3 was only used by i.MX25/35 board files. Since the
board files users are gone, it is safe to remove iomux-v3 related
code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

imx31_soc_init() and imx35_soc_init() were only used by i.MX31/35 board
files. Since the board files users are gone, it is safe to remove
imx3 soc_init() functions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.MX31 is a devicetree only platform.

Remove remaining i.MX31 board code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Now that imx27 has been converted to a devicetree-only platform,
retrieve the AVIC base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Get rid of mm-imx27.c and move its code to the mach-imx27.c file.

This aligns with other i.MX SoC code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

IMX_HAVE_IOMUX_V1 was only used by i.MX27 board files. Since the
board files users are gone, it is safe to remove iomux-v1 related
code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>