- 23 Jul, 2024 40 commits
-
-
Alex Deucher authored
Add the irq source for bad opcodes. Acked-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. v2: fix indexing (Jessie) Acked-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. v2: fix indexing (Jessie) Acked-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. v2: fix indexing (Jessie) Acked-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Stanley.Yang authored
The eeprom table is empty before initializing, set eeprom table version first before initializing. Changed from V1: Reuse amdgpu_ras_set_eeprom_table_version function Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is null. The fix adds a check to ensure `dc->clk_mgr` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
YiPeng Chai authored
The ras command shared memory is allocated from VRAM and the response status of the command buffer will not be zero due to gpu being in fatal error state after ras UE error injection. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
Philip Yang authored
Add atomic queue_refcount to struct bo_va, return -EBUSY to fail unmap BO from the GPU if the bo_va queue_refcount is not zero. Create queue to increase the bo_va queue_refcount, destroy queue to decrease the bo_va queue_refcount, to ensure the queue buffers mapped on the GPU when queue is active. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Alex Deucher authored
Based on gfx9.0 implementation. Reviewed-by:
-
Sunil Khatri authored
Add print support for ip dump for sdma_v_4_4_2 in devcoredump. Reviewed-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Philip Yang authored
Find user queue rptr, ring buf, eop buffer and cwsr area BOs, and check BOs are mapped on the GPU with correct size and take the BO reference. Signed-off-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn401_stream_encoder_create Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp' Fixes: 94beb4ac ("drm/amd/display: ensure EASF and ISHARP coefficients are programmed together") Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
dc/{dcn401,dcn303} are unused since the files in it got moved under their respective new components location. Hence they are no longer necessary Fixes: 2d62bb45 ("drm/amd/display: Refactor DCN3X into component folder") Reviewed-by: -
Joshua Aberback authored
[Why] Some interface functions are defined in both the public and private HWSS interfaces, which can lead to confusion and runtime issues, therefore the duplicates should be eliminated. [How] - power_down should only be private, because it's only used within HWSS. - update_plane_addr should only be public, as it's used outside HWSS. Reviewed-by:
Joshua Aberback <joshua.aberback@amd.com> Signed-off-by:
-
Dillon Varone authored
The disable fams2 operation was reworked, but some of the old code remained. This commit removes the disable_fams2_drr from the dml2_stream_parameters. Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
Remove some old comments from DCN32/321. Signed-off-by:
-
Alex Hung authored
[WHAT & HOW] Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res without initializing hpo_dp_link_enc and it is necessary to check for null before dereferencing. This fixes 1 FORWARD_NULL issue reported by Coverity. Fixes: 0beca868 ("drm/amd/display: Check link_res->hpo_dp_link_enc before using it") Reviewed-by:
-
Alex Hung authored
[WHY & HOW] dc_link_detect returns a boolean value which can be used to print debug messages when it fails. This fixes 1 CHECKED_RETURN issue reported by Coverity. Reviewed-by:
-
Sung Joon Kim authored
[why] When switching from extended to second display only mode, the top remote sink is not removed while the top stream itself is released. This causes DML to think there is no DP2 output encoder because top remote sink does not match with the second stream and disables DTBCLK and causes hang. [how] For DP2.0 MST hubs, only treat 1st remote sink as an encoder only when there are multiple displays connected. Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
Sung Joon Kim <sungjoon.kim@amd.com> Signed-off-by:
-
Gabe Teeger authored
[what & why] System hang after s4 regression points to code change here. Removing possible NULL dereference. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Gabe Teeger <gabe.teeger@amd.com> Signed-off-by:
-
Ilya Bakoulin authored
[Why/How] Need to identify which fast updates will update more than just the address. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
To distinguish between different soc with same DCN IP, use variants starting with alphabets Reviewed-by:
-
Aurabindo Pillai authored
Use more accurate names to refer to the asic architecture. dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x Reviewed-by:
-
Hansen Dsouza authored
[why & how] Add source select helpers based on DCCG spec Reviewed-by:
Daniel Miess <daniel.miess@amd.com> Signed-off-by:
Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by:
-
