- 26 Feb, 2010 40 commits
-
-
Oliver Endriss authored
Request might already have been processed when the interrupt arrives. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Oliver Endriss authored
Implement workaround for comamnd timeout. Use FW15 and avoid switching DMA on and off. Signed-off-by:
-
Oliver Endriss authored
Set ADC1 and ADC2 range of the stv0900 to 1Vpp. Signed-off-by:
-
Oliver Endriss authored
Adapt to current stv090x + stv6110 drivers. [mchehab@redhat.com: removed compilation hack added by me on a prev patch] Signed-off-by:
-
Matthias Benesch authored
Identify card 18c3:db01 as 'Mystique SaTiX-S2 Dual'. Signed-off-by:
Matthias Benesch <twoof7@freenet.de> Signed-off-by:
-
Manu Abraham authored
Trivial I2C related fixes/cleanups - Remove Unused I2C ID - point the I2C device to the physical device Signed-off-by:
Manu Abraham <manu@linuxtv.org> Acked-by:
-
Oliver Endriss authored
Remove/comment-out unused code, make some functions/declarations static. Signed-off-by:
-
Matthias Benesch authored
If parameter "one_adapter" is set, only one adapter per device will be attached. Otherwise an adapter for every frontend will be attached. Signed-off-by:
-
Oliver Endriss authored
Add EXPORT_SYMBOL(dvb_ringbuffer_flush) again, replace my_dvb_ringbuffer_flush() in ngene driver. Signed-off-by:
-
Oliver Endriss authored
Remove kernel version check for dvb_[un]register_adapter. Signed-off-by:
-
Oliver Endriss authored
Changed severity of some diagnostic messages. Signed-off-by:
-
Oliver Endriss authored
Remove stray mleep() which prevented fast tuning. Signed-off-by:
-
Roland Praml authored
Fixed unloading of module ngene. Signed-off-by:
Roland Praml <pram@gmx.de> Signed-off-by:
-
Matthias Benesch authored
Remove firmware debugging, because setting ngene_fw_debug and requesting firmware from file causes a kernel error. Signed-off-by:
-
Matthias Benesch authored
Added support for nGene based Media-Pointer DVB-S2 twin tuner cards. [mchehab@redhat.com: Fix compilation error: unknown field ‘ref_clk’] Signed-off-by:
-
Matthias Benesch authored
Remove and disable unnecessary code. Disable define ONE_ADAPTER. Signed-off-by:
-
Oliver Endriss authored
Always use firmware loader. Signed-off-by:
-
Oliver Endriss authored
Remove LNBH21 routines, disable code which broke compilation. Signed-off-by:
-
Matthias Benesch authored
Add Micronas nGene PCIe bridge driver. The source code was provided by Micronas / Ralph Metzler, and has been reformatted to comply with Linux Codingstyle. Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Márton Németh authored
The fifth parameter of usb_bulk_msg() is a pointer to signed (see <linux/usb.h>) so also call this function with pointer to signed. This will remove the following sparse warning (see "make C=1"): * warning: incorrect type in argument 5 (different signedness) expected int *actual_length got unsigned int *<noident> Signed-off-by:Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Jiri Slaby authored
So as a final patch, add support for hash and one hash entry for MSI digi vox mini II: iManufacturer 1 Afatech iProduct 2 DVB-T 2 iSerial 3 010101010600001 It is now handled with proper IR and key map tables. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jiri Slaby authored
Add af9015_setup structure to hold (right now only remote) setup of distinct receivers. Add af9015_setup_match for matching ids against tables. This is for easier matching different kind of ids against tables to obtain setups. Currently module parameters and usb vendor ids are switched into and matched against tables. Hashes will follow. Signed-off-by:
-
Jiri Slaby authored
This is just a code shuffle without functional changes. For easier review of later changes, i.e. preparation. Signed-off-by:
-
Jiri Slaby authored
This will be useful for matching of IR tables later. We read the eeprom anyway for dumping. Switch the dumping to print_hex_dump_bytes and compute hash above that by hash = 0; for (u32 VAL) in (eeprom): hash *= GOLDEN_RATIO_PRIME_32 hash += VAL; // while preserving endinaness The computation is moved earlier to the flow, namely from af9015_af9013_frontend_attach to af9015_read_config, so that we can access the sum in af9015_read_config already. Signed-off-by:
-
Kusanagi Kouichi authored
I tested only tv and composite. Video works fine but no audio. Signed-off-by:
Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by:
-
Márton Németh authored
The default_video_input and default_audio_input module parameters are only used inside the hdpvr-core.c file so make them static. This will remove the following sparse warnings (see "make C=1"): * warning: symbol 'default_video_input' was not declared. Should it be static? * warning: symbol 'default_audio_input' was not declared. Should it be static? Signed-off-by:
-
Richard Röjfors authored
Initial support for the SAA7706H Car Radio DSP. It is a I2C device and currently the mute control is supported. When the device is unmuted it is brought out of reset and initiated using the proposed intialisation sequence. When muted the DSP is brought into reset state. [akpm@linux-foundation.org: include delay.h] Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Cc: Douglas Schilling Landgraf <dougsland@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
Mad guess. Signed-off-by:
-
Andrew Morton authored
drivers/media/dvb/frontends/stv090x.c: In function 'stv090x_blind_search': drivers/media/dvb/frontends/stv090x.c:1967: warning: 'coarse_fail' may be used uninitialized in this function Cc: Manu Abraham <manu@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Andrew Morton authored
drivers/media/video/cx18/cx18-alsa-pcm.c: In function 'cx18_alsa_announce_pcm_data': drivers/media/video/cx18/cx18-alsa-pcm.c:82: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Cc: Andy Walls <awalls@radix.net> Signed-off-by:
-
Roel Kluin authored
If in a cold state and the download succeeded ret is zero, but we should return -ENOMEM. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Magnus Alm authored
fix Video/Sound support "Leadtek winfast tv usbii deluxe". Now, it is working Stereo, IR, Radio, TV, Svideo and Composite. Signed-off-by: -
Márton Németh authored
Make the file local parameters static. This will remove the following sparse warnings (see "make C=1"): * warning: symbol 'ir_pos' was not declared. Should it be static? * warning: symbol 'ir_word' was not declared. Should it be static? * warning: symbol 'ir_toggle' was not declared. Should it be static? Signed-off-by:
-
Massimo Del Fedele authored
Adds support to Pinnacle PCTV310e hybrid tuner card, for DVB-T and remote control, still no analog video. [mchehab@redhat.com: fix CodingStyle issues] Signed-off-by: -
Alexander Strakh authored
Fix lock imbalances in function device_authorization. Signed-off-by:
Alexander Strakh <strakh@ispras.ru> Signed-off-by:
-
Roel Kluin authored
state->internal allocation may fail as well as the allocation of stv0900_first_inode or new_node->next_inode in append_internal(). Signed-off-by:
-
Andy Walls authored
Operations that manipulates the state of the encoder or global instance flags and variables should be serialized. This adds some serialization locks that have been missing from cx18-dvb. Since the DVB part of the CX23418 doesn't affect the encoder, no one would likely have ever noticed a race in changing card instance variables. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
The cx18_open_id is normally dynamically allocated and stored in the filp->private_data for v4l2 file operations. The cx18-alsa routines should not dynamically allocate a cx18_open_id because they never store it anywhere and never free it. This change fixes that and plugs a memory leak. Signed-off-by:
-
