- 11 Aug, 2014 12 commits
-
-
Chris Wilson authored
We have an implementation requirement that precludes the user from requesting a ggtt entry when the device is operating in ppgtt mode. Move the current check from inside the execbuffer object collation to the prevalidation phase. v2: Roll both invalid flags checks into one Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Based upon a hunk from a patch from Chris Wilson, but augmented to: - Process the batch in the full ppgtt vm so that self-relocations match again with userspace's expectations.. - Add a comment why plain pin for the global gtt binding is safe at that point. v2: Drop local bind_vm variable (Chris). v3: Explain why this works despite the lack of proper active tracking for the ggtt batch vma. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by:
-
Chris Wilson authored
Adapt the macro so that we can pass either the struct drm_device or the struct drm_i915_private pointers and get the answer we want. Over time, my plan is to convert all users over to using drm_i915_private and so trimming down the pointer dance. Having spent a few hours chasing that goal and achieved over 8k of object code saving, it appears to be a worthwhile target. This interim macro allows us to slowly convert over. Signed-off-by:
-
Chris Wilson authored
During ring initialisation, sometimes we observe, though not in production hardware, that the idle flag is not set even though the ring is empty. Double check before giving up. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Found with sparse. Signed-off-by:
-
Chris Wilson authored
This is so that we can make the drm_i915_private->info always the preferred source for chipset type and feature queries. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
This migrates the fence tracking onto the existing seqno infrastructure so that the later conversion to tracking via requests is simplified. Signed-off-by:
-
Chris Wilson authored
Move the decision on whether we need to have a mappable object during execbuffer to the fore and then reuse that decision by propagating the flag through to reservation. As a corollary, before doing the actual relocation through the GTT, we can make sure that we do have a GTT mapping through which to operate. Note that the key to make this work is to ditch the obj->map_and_fenceable unbind optimization - with full ppgtt it doesn't make a lot of sense any more anyway. v2: Revamp and resend to ease future patches. v3: Refresh patch rationale References: https://bugs.freedesktop.org/show_bug.cgi?id=81094Signed-off-by:
-
Chris Wilson authored
If an object is not bound into the global GTT, then it cannot be accessed via the GTT. This restores the original code that was muddled by ppGTT. In the process, we remove a WARN that had long outlived its usefulness and was simply being coded around instead. Signed-off-by:
-
Damien Lespiau authored
I keep telling myself that those tables aren't great because their size is the number of dwords we need to program and not the number of entries (number of dwords = number of entries * 2). And... I got it wrong when I refactored the code. Fortunately, it was only wrong when the VBT table (or the code parsing it) is itself erroneous. Long story short, it shouldn't matter, but still, there's a potential array overflow and random programming of the DDI translation tables. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Sonika Jindal authored
Removing the check for HAS_PCH_SPLIT, it looks redundant here. Anyways all the platforms are checked separately. v2: Reordering as per the gen (Ville) Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Signed-off-by:
-
- 09 Aug, 2014 1 commit
-
-
Paulo Zanoni authored
Currently, if the machine is runtime suspended an you read the file, you will get an "Unclaimed register" error message. Testcase: igt/pm_rpm/debugfs-read Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
- 08 Aug, 2014 27 commits
-
-
Ville Syrjälä authored
Make the intel_{enable,disable}_primary_hw_plane() simply call .update_primary_plane(), thus eliminating the rmw from these functions which should help the poor old 830M. Now we can also remove the .update_primary_plane() from the .crtc_enable() hooks because we end up calling it via intel_crtc_enable_planes()->intel_enable_primary_hw_plane(). This also has the nice benefit of making primary planes a bit closer to the way we handle sprite planes during modesets. v2: Just write 0 to DSPCNTR and DSPSURF/DSPADDR if the plane is (to be) disabled. Quicker, and more importantly avoids an oops when fb==NULL due to BIOS fb takeover failure. Pimp the commit message a bit (Matt) v3: Drop useless primary_enabled checks when setting DISPLAY_PLANE_ENABLE Reviewed-by:Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Move the entire DSPCNTR register setup into the .update_primary_plane() functions. That's where it belongs anyway and it'll also help 830M which has the extra problem that plane registers reads will return the value latched at the last vblank, not the value that was last written. Also move DSPPOS and DSPSIZE setup there. v2: Don't move variable initialization to avoid churn later Reviewed-by:
-
Damien Lespiau authored
adj was defined as u8. The issue is last_adj can be negative and adj is initialized with: adj = dev_priv->rps.last_adj; and we were also happily doing things like: if (adj < 0) (thank static analysers!) v2: Make new_delay an int in case we overflow the u8 in the intermediate computations. new_delay will get clamped at the end anyway. (Ville) Cc: Deepak S <deepak.s@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Daniel Vetter authored
Signed-off-by: -
Daniel Vetter authored
Doing a 1s wait (tops) with the cpu is a bit excessive. Tune it down like everything else in that code. v2: Also insert the missing space Chris spotted. Cc: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Gajanan Bhat authored
Program DDL register as part of sprite watermark programming for CHV and VLV. v2: Rename DRAIN_LATENCY_MAX by DRAIN_LATENCY_MASK v3: Addressed review comments by Ville - Changed Sprite DDL definitions to more generic to avoid multiple if-else - Changed bit masking to customary form - Changed to bitwise shorthand operator for sprite_dl assignment Signed-off-by:Gajanan Bhat <gajanan.bhat@intel.com> Reviewed-by:
-
Gajanan Bhat authored
Round up clock computation and limit drain latency to maximum of 0x7F. Signed-off-by:
-
Gajanan Bhat authored
Modify drain latency computation to use it for any plane. Same function can be used for primary, cursor and sprite planes. v2: Adressed review comments by Imre and Ville. - Moved clock round up in separate patch - Added WARN check for clock and pixel size - Simplified bit masking - Use cursor_base instead of reg read v3: Changed to bitwise shorthand operator for plane_dl assignment. Signed-off-by: -
Ville Syrjälä authored
If there are pending page flips when the fd gets closed those page flips may have events associated to them. When the page flip eventually completes it will queue the event to file_priv->event_list, but that may be too late and file_priv->event_list has already been cleaned up. Thus we leak a bit of kernel memory in the form of the event structure. To avoid such problems clear out such pending events from intel_crtc->unpin_work at ->preclose(). Any event that already made it to file_priv->event_list will get cleaned up by the drm_release_events() a bit later. We can ignore the file_priv->event_space accounting since file_priv is going away. This is already how drm core deals with pending vblank events, which are maintained by the drm core. What saves us from a total disaster (ie. dereferencing and alrady freed file_priv) is the fact that the fb descruction triggers a modeset and there we wait for pending flips. Signed-off-by:
-
Jesse Barnes authored
sanitize_enable_ppgtt is the function that checks all the conditions, honoring a forced ppgtt status or doing auto-detect as necessary. Just make sure it returns the right value in all cases and use that in the macros instead of the confusing intel_enable_ppgtt() function. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> [danvet: Don't reenable full ppgtt through the backdoor.] Signed-off-by:
-
Ville Syrjälä authored
Replace the semi-funky cmnlane assert/deassert macros with something a bit more conventional. Also protect the macro arguments properly (also for PHY_POWERGOOD()). Reviewed-by:
Rafael Barbalho <rafael.barbalho@intel.com> Signed-off-by:
-
Ville Syrjälä authored
It looks like frobbing the cmnreset line on pne PHY disturbs the other PHY on chv. The result is a black screen. On HDMI it's just a flash of black, but DP usually falls over and can't get back up. As a workaround set up the power domains so that both common lane wells power up and down together. I also tried leaving the cmnreset deasserted even the if the power well goes down but that didn't seem acceptable to the PHY. Reviewed-by:
-
Ville Syrjälä authored
CHV has a third pipe so we need to compute the watermarks for its planes. Add cherryview_update_wm() to do just that. v2: Rebase on top of Imre's cxsr changes v3: Pass crtc to vlv_update_drain_latency() Reviewed-by:
-
Gajanan Bhat authored
Instead of looping through all CRTCs, update DDL for current CRTC for which watermark is being updated. CHV is confirmed to have precision of 32/64 which is same as VLV. Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The VLV/CHV DDL registers are uniform, and neatly enough the register offsets are sane so we can easily unify them to a single set of defines and just pass the pipe as the parameter to compute the register offset. Note that we now fill out the drain latency for pipe C on CHV which we didn't do before. The rest of the pipe C watermarks are still untouched but that will be remedied later by adding a proper cherryview_update_wm() function. v2: Add a note about CHV pipe C changes (Paulo) Reviewed-by:
-
Ville Syrjälä authored
Add defines for all the watermark registers on modernish gmch platforms. VLV has increased the number of bits available for certain watermaks so expand the masks appropriately. Also vlv and chv have added some extra FW registers. Not sure what happened on chv because a new register called FW9 is now at the offset where FW7 was on vlv, while FW7 and FW8 (another new register) have been moved off somewhere else. Oh well, well just need two defines for FW7 then. v2: Fix DSPHOWM1 offset (Paulo) Reviewed-by:
-
Sonika Jindal authored
Reset rotation property to 0. v2: Resetting after disabling the plane Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users. v2: Moving rotation_property to mode_config Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Sonika Jindal authored
Signed-off-by:
-
Ville Syrjälä authored
Propagate the error from intel_update_plane() up through intel_plane_restore() to the caller. This will be used for rollback purposes when setting properties fails. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Ville Syrjälä authored
The sprite planes (in fact all display planes starting from gen4) support 180 degree rotation. Add the relevant low level bits to the sprite code to make use of that feature. The upper layers are not yet plugged in. v2: HSW handles the rotated buffer offset automagically v3: BDW also handles the rotated buffer offset automagically Testcase: igt/kms_rotation_crc Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Sagar Kamble <sagar.a.kamble@intel.com> Reviewed-by:
-
Damien Lespiau authored
Following the established idom, let's provide a macro to iterate through the encoders. spatch helps, once more, for the substitution: @@ iterator name list_for_each_entry; iterator name for_each_intel_encoder; struct intel_encoder * encoder; struct drm_device * dev; @@ -list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { +for_each_intel_encoder(dev, encoder) { ... } I also modified a few call sites by hand where a pointer to mode_config was directly used (to avoid overflowing 80 chars). Signed-off-by: -
Damien Lespiau authored
While those messages are interesting, there aren't _that_ interesting. We don't need them in the kernel logs by default. Signed-off-by:
-
Paulo Zanoni authored
cat i915_reg.h | sort | uniq -d | grep define Signed-off-by:
-
Damien Lespiau authored
We used to carry a default HDMI value in entry 9, but this entry got removed for both HSW and BDW. Signed-off-by:
-
Damien Lespiau authored
We always write entries 0 to 8 from the DDI translation tables and then entry 9 for HDMI/DVI with the help of the VBT. We then don't need the failsafe HDMI entry in the DP/eDP/FDI tables. Signed-off-by:
-
Damien Lespiau authored
Among the changes, the tables has only 10 entries instead of 12 on HSW and the index the the 800mV/0dB entry has changed. Signed-off-by:
-
