- 24 Jun, 2017 21 commits
-
-
Geert Uytterhoeven authored
commit 5f76895e upstream. When changing hardware control flow for a UART with dedicated RTS/CTS pins, the new AUTORTS state is not immediately reflected in the hardware, but only when RTS is raised. However, the serial core does not call .set_mctrl() after .set_termios(), hence AUTORTS may only become effective when the port is closed, and reopened later. Note that this problem does not happen when manually using stty to change CRTSCTS, as AUTORTS will work fine on next open. To fix this, call .set_mctrl() from .set_termios() when dedicated RTS/CTS pins are present, to refresh the AUTORTS or RTS state. This is similar to what other drivers supporting AUTORTS do (e.g. omap-serial). Reported-by:
Baumann, Christoph (C.) <cbaumann@visteon.com> Fixes: 33f50ffc ("serial: sh-sci: Fix support for hardware-assisted RTS/CTS") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe JAILLET authored
commit be40597a upstream. UARTn_FRAME_PARITY_ODD is 0x0300 UARTn_FRAME_PARITY_EVEN is 0x0200 So if the UART is configured for EVEN parity, it would be reported as ODD. Fix it by correctly testing if the 2 bits are set. Fixes: 3afbd89c ("serial/efm32: add new driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Eric Anholt authored
commit ca39b449 upstream. If a CMA allocation failed, the partially constructed BO would be unreferenced through the normal path, and we might choose to put it in the BO cache. If we then reused it before it expired from the cache, the kernel would OOPS. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: c826a6e1 ("drm/vc4: Add a BO cache.") Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170301185602.6873-2-eric@anholt.netSigned-off-by:
-
YYS authored
commit 014580ff upstream. mtk_hdmi_setup_vendor_specific_infoframe will return before handle mtk_hdmi_hw_send_info_frame.Because hdmi_vendor_infoframe_pack returns the number of bytes packed into the binary buffer or a negative error code on failure. So correct it. Fixes: 8f83f268 ("drm/mediatek: Add HDMI support") Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by:
CK Hu <ck.hu@mediatek.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit b3dd8279 upstream. mac80211 allows to modify the SMPS state of an AP both, when it is started, and after it has been started. Such a change will trigger an action frame to all the peers that are currently connected, and will be remembered so that new peers will get notified as soon as they connect (since the SMPS setting in the beacon may not be the right one). This means that we need to remember the SMPS state currently requested as well as the SMPS state that was configured initially (and advertised in the beacon). The former is bss->req_smps and the latter is sdata->smps_mode. Initially, the AP interface could only be started with SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF always. Later, a nl80211 API was added to be able to start an AP with a different AP mode. That code forgot to update bss->req_smps and because of that, if the AP interface was started with SMPS_DYNAMIC, we had: sdata->smps_mode = SMPS_DYNAMIC bss->req_smps = SMPS_OFF That configuration made mac80211 think it needs to fire off an action frame to any new station connecting to the AP in order to let it know that the actual SMPS configuration is SMPS_OFF. Fix that by properly setting bss->req_smps in ieee80211_start_ap. Fixes: f6993174 ("mac80211: set smps_mode according to ap params") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit e165bc02 upstream. In the commit enabling per-CPU station statistics, I inadvertedly copy-pasted some code to update rx_packets and forgot to change it to update rx_dropped_misc. Fix that. This addresses https://bugzilla.kernel.org/show_bug.cgi?id=195953. Fixes: c9c5962b ("mac80211: enable collecting station statistics per-CPU") Reported-by:
Petru-Florin Mihancea <petrum@gmail.com> Signed-off-by:
-
Rajkumar Manoharan authored
commit 5667c86a upstream. Mesh forwarding path checks for address extension mode to fetch appropriate proxied address and MPP address. Existing condition that looks for 6 address format is not strict enough so that frames with improper values are processed and invalid entries are added into MPP table. Fix that by adding a stricter check before processing the packet. Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension mode 0x3 as reserved one. And also Table Table 9-13 does not specify 0x3 as valid address field. Fixes: 9b395bc3 ("mac80211: verify that skb data is present") Signed-off-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
-
Johannes Berg authored
commit f1f3e9e2 upstream. When VHT IBSS support was added, the size of the extra elements wasn't considered in ieee80211_ibss_build_presp(), which makes it possible that it would overrun the allocated buffer. Fix it by allocating the necessary space. Fixes: abcff6ef ("mac80211: add VHT support for IBSS") Reported-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 0328edc7 upstream. When adding per-CPU statistics, which added statistics back to mac80211 for the fast-RX path, I evidently forgot to add the "stats->packets++" line. The reason for that is likely that I didn't see it since it's done in defragmentation for the regular RX path. Add the missing line to properly count received packets in the fast-RX case. Fixes: c9c5962b ("mac80211: enable collecting station statistics per-CPU") Reported-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Koen Vandeputte authored
commit f181d6a3 upstream. Add the missing IBSS capability flag during capability init as it needs to be inserted into the generated beacon in order for CSA to work. Fixes: cd7760e6 ("mac80211: add support for CSA in IBSS mode") Signed-off-by:
Piotr Gawlowicz <gawlowicz@tkn.tu-berlin.de> Signed-off-by:
Mikołaj Chwalisz <chwalisz@tkn.tu-berlin.de> Tested-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by:
-
Bin Liu authored
commit b3addcf0 upstream. Currently VBUS is turned off while a usb device is detached, and turned on again by the polling routine. This short period VBUS loss prevents usb modem to switch mode. VBUS should be constantly on for host-only mode, so this changes the driver to not turn off VBUS for host-only mode. Fixes: 2f3fd2c5 ("usb: musb: Prepare dsps glue layer for PM runtime support") Reported-by:
Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Zhenyu Wang authored
commit c380f681 upstream. Current it's strictly checked if PVINFO version matches 1.0 for GVT-g i915 guest which doesn't help for compatibility at all and forces GVT-g host can't extend PVINFO easily with version bump for real compatibility check. This fixes that to check minimal required PVINFO version instead. v2: - drop unneeded version macro - use only major version for sanity check v3: - fix up PVInfo value with kernel type - one indent fix Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Mario Kleiner authored
commit bea10413 upstream. Commit d63c277d ("drm/amdgpu: Make display watermark calculations more accurate") made watermark calculations more accurate, but not for > 4k resolutions on 32-Bit architectures, as it introduced an integer overflow for those setups and resolutions. Fix this by proper u64 casting and division. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: d63c277d ("drm/amdgpu: Make display watermark calculations more accurate") Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 98c67d18 upstream. Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Emmanuel Grumbach authored
commit 769dc04d upstream. When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Signed-off-by:
-
Christophe JAILLET authored
commit 5ebb6dd3 upstream. We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0a ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Tomasz Wilczyński authored
commit b8e11f7d upstream. Commit 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by:
Tomasz Wilczyński <twilczynski@naver.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0db47e3d upstream. While discussing the possible merits of clang warning about unused initialized functions, I found one function that was clearly meant to be called but never actually is. __ila_hash_secret_init() initializes the hash value for the ila locator, apparently this is intended to prevent hash collision attacks, but this ends up being a read-only zero constant since there is no caller. I could find no indication of why it was never called, the earliest patch submission for the module already was like this. If my interpretation is right, we certainly want to backport the patch to stable kernels as well. I considered adding it to the ila_xlat_init callback, but for best effect the random data is read as late as possible, just before it is first used. The underlying net_get_random_once() is already highly optimized to avoid overhead when called frequently. Fixes: 7f00feaf ("ila: Add generic ILA translation facility") Link: https://www.spinics.net/lists/kernel/msg2527243.htmlSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marc Kleine-Budde authored
commit 5cda3ee5 upstream. This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Nicholas Bellinger authored
commit ba80aa90 upstream. This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
commit 20223f0f upstream. Fixes: 793b80ef ("vfs: pass a flags argument to vfs_readv/vfs_writev") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 17 Jun, 2017 19 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit b5c32061 upstream. My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit) then some of the strings will overflow. I don't know if that's possible but it seems simple enough to make the buffers slightly larger. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Maarten Lankhorst authored
commit 4e3aed84 upstream. On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 8f4d3809 upstream. The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: Jonas Aaberg <cja@gmx.net> Tested-by:
Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.comTested-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Christian Borntraeger authored
commit c0e7bb38 upstream. For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Max Filippov authored
commit e5c86679 upstream. Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 59e8970b ] Return the maximum supported amount of inline data, not the qp's current configured inline data size, when filling out the results of a query qp call. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit c78c3149 ] It is normal to flush CQEs if the QP is in error state. Hence there's no use in printing a message per CQE to dmesg. Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 933e6dca ] Fail QP state transition from error to reset if SQ/RQ are not empty and still in the process of flushing out the queued work entries. Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 9c1e0228 ] Free the PD if no internal resources were available. Move userspace code under the relevant 'if'. Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit f449c7a2 ] Relying on qede to trigger qedr on startup is problematic. When probing both if qedr loads slowly then qede can assume qedr is missing and not trigger it. This patch adds a triggering from qedr and protects against a race via an atomic bit. Signed-off-by:
-
Liping Zhang authored
[ Upstream commit 5ce6b04c ] First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127, at nf_log_packet(), so the extra part is useless. Second, after adding a log rule with a very very long prefix, we will fail to dump the nft rules after this _special_ one, but acctually, they do exist. For example: # name_65000=$(printf "%0.sQ" {1..65000}) # nft add rule filter output log prefix "$name_65000" # nft add rule filter output counter # nft add rule filter output counter # nft list chain filter output table ip filter { chain output { type filter hook output priority 0; policy accept; } } So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 35d0ac90 ] If the element exists and no NLM_F_EXCL is specified, do not bump set->nelems, otherwise we leak one set element slot. This problem amplifies if the set is full since the abort path always decrements the counter for the -ENFILE case too, giving one spare extra slot. Fix this by moving set->nelems update to nft_add_set_elem() after successful element insertion. Moreover, remove the element if the set is full so there is no need to rely on the abort path to undo things anymore. Fixes: c016c7e4 ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion") Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 93f955aa ] We trigger a soft lockup as we grab nametbl_lock twice if the node has a pending node up/down or link up/down event while: - we process an incoming named message in tipc_named_rcv() and perform an tipc_update_nametbl(). - we have pending backlog items in the name distributor queue during a nametable update using tipc_nametbl_publish() or tipc_nametbl_withdraw(). The following are the call chain associated: tipc_named_rcv() Grabs nametbl_lock tipc_update_nametbl() (publish/withdraw) tipc_node_subscribe()/unsubscribe() tipc_node_write_unlock() << lockup occurs if an outstanding node/link event exits, as we grabs nametbl_lock again >> tipc_nametbl_withdraw() Grab nametbl_lock tipc_named_process_backlog() tipc_update_nametbl() << rest as above >> The function tipc_node_write_unlock(), in addition to releasing the lock processes the outstanding node/link up/down events. To do this, we need to grab the nametbl_lock again leading to the lockup. In this commit we fix the soft lockup by introducing a fast variant of node_unlock(), where we just release the lock. We adapt the node_subscribe()/node_unsubscribe() to use the fast variants. Reported-and-Tested-by:
John Thompson <thompa.atl@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit d094c4d5 ] Until now, the subscribers keep track of the subscriptions using reference count at subscriber level. At subscription cancel or subscriber delete, we delete the subscription only if the timer was pending for the subscription. This approach is incorrect as: 1. del_timer() is not SMP safe, if on CPU0 the check for pending timer returns true but CPU1 might schedule the timer callback thereby deleting the subscription. Thus when CPU0 is scheduled, it deletes an invalid subscription. 2. We export tipc_subscrp_report_overlap(), which accesses the subscription pointer multiple times. Meanwhile the subscription timer can expire thereby freeing the subscription and we might continue to access the subscription pointer leading to memory violations. In this commit, we introduce subscription refcount to avoid deleting an invalid subscription. Reported-and-Tested-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit fc0adfc8 ] Until now, the generic server framework maintains the connection id's per subscriber in server's conn_idr. At tipc_close_conn, we remove the connection id from the server list, but the connection is valid until we call the refcount cleanup. Hence we have a window where the server allocates the same connection to an new subscriber leading to inconsistent reference count. We have another refcount warning we grab the refcount in tipc_conn_lookup() for connections with flag with CF_CONNECTED not set. This usually occurs at shutdown when the we stop the topology server and withdraw TIPC_CFG_SRV publication thereby triggering a withdraw message to subscribers. In this commit, we: 1. remove the connection from the server list at recount cleanup. 2. grab the refcount for a connection only if CF_CONNECTED is set. Tested-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 4c887aa6 ] In tipc_conn_sendmsg(), we first queue the request to the outqueue followed by the connection state check. If the connection is not connected, we should not queue this message. In this commit, we reject the messages if the connection state is not CF_CONNECTED. Acked-by:
-
Vineet Gupta authored
[ Upstream commit 78f824d4 ] This is needed on HS38 cores, for setting up IO-Coherency aperture properly The polling could perturb the caches and coherecy fabric which could be wrong in the small window when Master is setting up IOC aperture etc in arc_cache_init() We do it only for ARCv2 based builds to not affect EZChip ARCompact based platform. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit bf02454a ] For run-on-reset SMP configs, non master cores call a routine which waits until Master gives it a "go" signal (currently using a shared mem flag). The same routine then jumps off the well known entry point of all non Master cores i.e. @first_lines_of_secondary This patch moves out the last part into one single place in early boot code. This is better in terms of absraction (the wait API only waits) and returns, leaving out the "jump off to" part. In actual implementation this requires some restructuring of the early boot code as well as Master now jumps to BSS setup explicitly, vs. falling thru into it before. Technically this patch doesn't cause any functional change, it just moves the ugly #ifdef'ry from assembly code to "C" Signed-off-by:
-
