- 24 Jul, 2018 31 commits
-
-
Nir Dotan authored
Propagate extack pointer in order to add extack messages for ACL. In the follow-up patches, appropriate messages will be added in various points. Signed-off-by:
Nir Dotan <nird@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
->start() is called once when dump is being initialized, there is no need to store it in netlink_cb. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2018-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Only a few things: * HE (802.11ax) support in HWSIM * bypass TXQ with NDP frames as they're special * convert ahash -> shash in lib80211 TKIP * avoid playing with tailroom counter defer unless needed to avoid issues in some cases ==================== Signed-off-by:
-
Manikanta Pubbisetty authored
As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Kees Cook authored
In preparing to remove all stack VLA usage from the kernel[1], this removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash to direct shash. The stack allocation will be made a fixed size in a later patch to the crypto subsystem. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 The first set of patches for 4.19. Only smaller features and bug fixes, not really anything major. Also included are changes to include/linux/bitfield.h, we agreed with Johannes that it makes sense to apply them via wireless-drivers-next. Major changes: ath10k * support channel 173 * fix spectral scan for QCA9984 and QCA9888 chipsets ath6kl * add support for Dell Wireless 1537 ti wlcore * add support for runtime PM * enable runtime PM autosuspend support qtnfmac * support changing MAC address * enable source MAC address randomization support libertas * fix suspend and resume for SDIO cards mt76 * add software DFS radar pattern detector for mt76x2 based devices ==================== Signed-off-by:
-
David S. Miller authored
Ka-Cheong Poon says: ==================== rds: IPv6 support This patch set adds IPv6 support to the kernel RDS and related modules. Existing RDS apps using IPv4 address continue to run without any problem. New RDS apps which want to use IPv6 address can do so by passing the address in struct sockaddr_in6 to bind(), connect() or sendmsg(). And those apps also need to use the new IPv6 equivalents of some of the existing socket options as the existing options use a 32 bit integer to store IP address. All RDS code now use struct in6_addr to store IP address. IPv4 address is stored as an IPv4 mapped address. Header file changes There are many data structures (RDS socket options) used by RDS apps which use a 32 bit integer to store IP address. To support IPv6, struct in6_addr needs to be used. To ensure backward compatibility, a new data structure is introduced for each of those data structures which use a 32 bit integer to represent an IP address. And new socket options are introduced to use those new structures. This means that existing apps should work without a problem with the new RDS module. For apps which want to use IPv6, those new data structures and socket options can be used. IPv4 mapped address is used to represent IPv4 address in the new data structures. Internally, all RDS data structures which contain an IP address are changed to use struct in6_addr to store the address. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_TCP_PORT to send the connection set up request. RDS/TCP changes TCP related code is changed to support IPv6. Note that only an IPv6 TCP listener on port RDS_TCP_PORT is created as it can accept both IPv4 and IPv6 connection requests. IB/RDMA changes The initial private data exchange between IB endpoints using RDMA is changed to support IPv6 address instead, if the peer address is IPv6. To ensure backward compatibility, annother RDMA listener port (RDS_CM_PORT) is used to accept IPv6 connection. An IPv6 capable RDS module continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. ==================== Signed-off-by: -
Ka-Cheong Poon authored
There are many data structures (RDS socket options) used by RDS apps which use a 32 bit integer to store IP address. To support IPv6, struct in6_addr needs to be used. To ensure backward compatibility, a new data structure is introduced for each of those data structures which use a 32 bit integer to represent an IP address. And new socket options are introduced to use those new structures. This means that existing apps should work without a problem with the new RDS module. For apps which want to use IPv6, those new data structures and socket options can be used. IPv4 mapped address is used to represent IPv4 address in the new data structures. v4: Revert changes to SO_RDS_TRANSPORT Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Ka-Cheong Poon authored
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the listener is now an IPv6 endpoint which accepts both IPv4 and IPv6 connection requests. RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. v5: Fixed syntax problem (David Miller). v4: Changed port history comments in rds.h (Sowmini Varadhan). v3: Added support to set up IPv4 connection using mapped address (David Miller). Added support to set up connection between link local and non-link addresses. Various review comments from Santosh Shilimkar and Sowmini Varadhan. v2: Fixed bound and peer address scope mismatched issue. Added back rds_connect() IPv6 changes. Signed-off-by: -
Ka-Cheong Poon authored
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. But RDS socket layer is not modified such that it still does not accept IPv6 address from an application. And RDS layer does not accept nor initiate IPv6 connections. v2: Fixed sparse warnings. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== sched: introduce chain templates support with offloading to mlxsw For the TC clsact offload these days, some of HW drivers need to hold a magic ball. The reason is, with the first inserted rule inside HW they need to guess what fields will be used for the matching. If later on this guess proves to be wrong and user adds a filter with a different field to match, there's a problem. Mlxsw resolves it now with couple of patterns. Those try to cover as many match fields as possible. This aproach is far from optimal, both performance-wise and scale-wise. Also, there is a combination of filters that in certain order won't succeed. Most of the time, when user inserts filters in chain, he knows right away how the filters are going to look like - what type and option will they have. For example, he knows that he will only insert filters of type flower matching destination IP address. He can specify a template that would cover all the filters in the chain. This patchset is providing the possibility to user to provide such template to kernel and propagate it all the way down to device drivers. See the examples below. Create dummy device with clsact first: There is no chain present by by default: Add chain number 11 by explicit command: chain parent ffff: chain 11 Add filter to chain number 12 which does not exist. That will create implicit chain 12: chain parent ffff: chain 11 chain parent ffff: chain 12 Delete both chains: Add a chain with template of type flower allowing to insert rules matching on last 2 bytes of destination mac address: The chain with template is now showed in the list: chain parent ffff: flower chain 0 dst_mac 00:00:00:00:00:00/00:00:00:00:ff:ff eth_type ipv4 Add another chain (number 22) with template: chain parent ffff: flower chain 0 dst_mac 00:00:00:00:00:00/00:00:00:00:ff:ff eth_type ipv4 chain parent ffff: flower chain 22 eth_type ipv4 dst_ip 0.0.0.0/16 Add a filter that fits the template: Addition of filters that does not fit the template would fail: Error: cls_flower: Mask does not fit the template. We have an error talking to the kernel, -1 Error: cls_flower: Mask does not fit the template. We have an error talking to the kernel, -1 Additions of filters to chain 22: Error: cls_flower: Mask does not fit the template. We have an error talking to the kernel, -1 Error: cls_flower: Mask does not fit the template. We have an error talking to the kernel, -1 --- v3->v4: - patch 2: - new patch - patch 3: - new patch, derived from the previous v3 chaintemplate obj patch - patch 4: - only templates part as chains creation/deletion is now a separate patch - don't pass template priv as arg of "change" op - patch 6: - rebased on top of flower cvlan patch and ip tos/ttl patch - patch 7: - templave priv is no longer passed as an arg to "change" op - patch 11: - split from the originally single patch - patch 12: - split from the originally single patch v2->v3: - patch 7: - rebase on top of the reoffload patchset - patch 8: - rebase on top of the reoffload patchset v1->v2: - patch 8: - remove leftover extack arg in fl_hw_create_tmplt() ==================== Signed-off-by: -
Jiri Pirko authored
Add basic sanity tests for TC chain templates. Signed-off-by:
-
Jiri Pirko authored
Add basic sanity tests for TC chains. Signed-off-by:
-
Jiri Pirko authored
The shared block support is only needed for tc_shblock.sh. No need to require that for other test. Signed-off-by:
-
Jiri Pirko authored
Since cld_flower provides information about the filter template for specific chain, use this information in order to prepare a region. Use the template to find out what elements are going to be used and pass that down to mlxsw_sp_acl_tcam_group_add(). Later on, when the first filter is inserted, the mlxsw_sp_acl_tcam_group_use_patterns() function would use this element usage information instead of looking up a pattern. Signed-off-by:
-
Jiri Pirko authored
Introduce a couple of flower offload commands in order to propagate template creation/destruction events down to device drivers. Drivers may use this information to prepare HW in an optimal way for future filter insertions. Signed-off-by:
-
Jiri Pirko authored
Use the previously introduced template extension and implement callback to create, destroy and dump chain template. The existing parsing and dumping functions are re-used. Also, check if newly added filters fit the template if it is set. Signed-off-by:
-
Jiri Pirko authored
This function is going to be used for templates as well, so we need to pass the pointer separately. Signed-off-by:
-
Jiri Pirko authored
Push key/mask dumping from fl_dump() into a separate function fl_dump_key(), that will be reused for template dumping. Signed-off-by:
-
Jiri Pirko authored
Allow user to set a template for newly created chains. Template lock down the chain for particular classifier type/options combinations. The classifier needs to support templates, otherwise kernel would reply with error. Signed-off-by:
-
Jiri Pirko authored
Allow user to create, destroy, get and dump chain objects. Do that by extending rtnl commands by the chain-specific ones. User will now be able to explicitly create or destroy chains (so far this was done only automatically according the filter/act needs and refcounting). Also, the user will receive notification about any chain creation or destuction. Signed-off-by:
-
Jiri Pirko authored
Currently, chain 0 is implicitly created during block creation. However that does not align with chain object exposure, creation and destruction api introduced later on. So make the chain 0 behave the same way as any other chain and only create it when it is needed. Since chain 0 is somehow special as the qdiscs need to hold pointer to the first chain tp, this requires to move the chain head change callback infra to the block structure. Signed-off-by:
-
Jiri Pirko authored
Push all bits that take care of ops lookup, including module loading outside tcf_proto_create() function, into tcf_proto_lookup_ops() Signed-off-by:
-
David S. Miller authored
Ivan Khoronzhuk says: ==================== net: ethernet: ti: cpsw: add MQPRIO and CBS Qdisc offload This series adds MQPRIO and CBS Qdisc offload for TI cpsw driver. It potentially can be used in audio video bridging (AVB) and time sensitive networking (TSN). Patchset was tested on AM572x EVM and BBB boards. Last patch from this series adds detailed description of configuration with examples. For consistency reasons, in role of talker and listener, tools from patchset "TSN: Add qdisc based config interface for CBS" were used and can be seen here: https://www.spinics.net/lists/netdev/msg460869.html Based on net-next/master v5..v4: - corrected typo of "am57xx" board name, no functional changes v4..v3: - nothing, just rebase v3..v2: - corrected typo of "shaper" word, no functional changes v2..v1: - changed name cpsw.txt on ti-cpsw.txt - changed name cpsw_set_tc() on cpsw_set_mqprio() ==================== Signed-off-by:
-
Ivan Khoronzhuk authored
This document describes MQPRIO and CBS Qdisc offload configuration for cpsw driver based on examples. It potentially can be used in audio video bridging (AVB) and time sensitive networking (TSN). Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Ivan Khoronzhuk authored
Need to restore shapers configuration after interface was down/up. This is needed as appropriate configuration is still replicated in kernel settings. This only shapers context restore, so vlan configuration should be restored by user if needed, especially for devices with one port where vlan frames are sent via ALE. Reviewed-by:
-
Ivan Khoronzhuk authored
The cpsw has up to 4 FIFOs per port and upper 3 FIFOs can feed rate limited queue with shaping. In order to set and enable shaping for those 3 FIFOs queues the network device with CBS qdisc attached is needed. The CBS configuration is added for dual-emac/single port mode only, but potentially can be used in switch mode also, based on switchdev for instance. Despite the FIFO shapers can work w/o cpdma level shapers the base usage must be in combine with cpdma level shapers as described in TRM, that are set as maximum rates for interface queues with sysfs. One of the possible configuration with txq shapers and CBS shapers: Configured with echo RATE > /sys/class/net/eth0/queues/tx-0/tx_maxrate /--------------------------------------------------- / / cpdma level shapers +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ | c7 | | c6 | | c5 | | c4 | | c3 | | c2 | | c1 | | c0 | \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \/ \/ \/ \/ \/ \/ \/ \/ +---------|------|------|------|-------------------------------------+ | +----+ | | +---+ | | | +----+ | | | | v v v v | | +----+ +----+ +----+ +----+ p p+----+ +----+ +----+ +----+ | | | | | | | | | | o o| | | | | | | | | | | f3 | | f2 | | f1 | | f0 | r CPSW r| f3 | | f2 | | f1 | | f0 | | | | | | | | | | | t t| | | | | | | | | | \ / \ / \ / \ / 0 1\ / \ / \ / \ / | | \ X \ / \ / \ / \ / \ / \ / \ / | | \/ \ \/ \/ \/ \/ \/ \/ \/ | +-------\------------------------------------------------------------+ \ \ FIFO shaper, set with CBS offload added in this patch, \ FIFO0 cannot be rate limited ------------------------------------------------------ CBS shaper configuration is supposed to be used with root MQPRIO Qdisc offload allowing to add sk_prio->tc->txq maps that direct traffic to appropriate tx queue and maps L2 priority to FIFO shaper. The CBS shaper is intended to be used for AVB where L2 priority (pcp field) is used to differentiate class of traffic. So additionally vlan needs to be created with appropriate egress sk_prio->l2 prio map. If CBS has several tx queues assigned to it, the sum of their bandwidth has not overlap bandwidth set for CBS. It's recomended the CBS bandwidth to be a little bit more. The CBS shaper is configured with CBS qdisc offload interface using tc tool from iproute2 packet. For instance: $ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 $ tc -g class show dev eth0 +---(100:ffe2) mqprio | +---(100:3) mqprio | +---(100:4) mqprio | +---(100:ffe1) mqprio | +---(100:2) mqprio | +---(100:ffe0) mqprio +---(100:1) mqprio $ tc qdisc add dev eth0 parent 100:1 cbs locredit -1440 \ hicredit 60 sendslope -960000 idleslope 40000 offload 1 $ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \ hicredit 62 sendslope -980000 idleslope 20000 offload 1 The above code set CBS shapers for tc0 and tc1, for that txq0 and txq1 is used. Pay attention, the real set bandwidth can differ a bit due to discreteness of configuration parameters. Here parameters like locredit, hicredit and sendslope are ignored internally and are supposed to be set with assumption that maximum frame size for frame - 1500. It's supposed that interface speed is not changed while reconnection, not always is true, so inform user in case speed of interface was changed, as it can impact on dependent shapers configuration. For more examples see Documentation. Reviewed-by: -
Ivan Khoronzhuk authored
That's possible to offload vlan to tc priority mapping with assumption sk_prio == L2 prio. Example: $ ethtool -L eth0 rx 1 tx 4 $ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 $ tc -g class show dev eth0 +---(100:ffe2) mqprio | +---(100:3) mqprio | +---(100:4) mqprio | +---(100:ffe1) mqprio | +---(100:2) mqprio | +---(100:ffe0) mqprio +---(100:1) mqprio Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3 txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2 The offload part only maps L2 prio to classes of traffic, but not to transmit queues, so to direct traffic to traffic class vlan has to be created with appropriate egress map. Reviewed-by:
-
Ivan Khoronzhuk authored
According to TRM tx rated channels should be in 7..0 order, so correct it. Reviewed-by:
-
Ivan Khoronzhuk authored
The cpdma channel highest priority is from hi to lo number. The driver has limited number of descriptors that are shared between number of cpdma channels. Number of queues can be tuned with ethtool, that allows to not spend descriptors on not needed cpdma channels. In AVB usually only 2 tx queues can be enough with rate limitation. The rate limitation can be used only for hi priority queues. Thus, to use only 2 queues the 8 has to be created. It's wasteful. So, in order to allow using only needed number of rate limited tx queues, save resources, and be able to set rate limitation for them, let assign tx cpdma channels in backward order to queues. Reviewed-by:
-
David S. Miller authored
Merge tag 'mlx5e-updates-2018-07-18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-07-18 This series includes update for mlx5e net device driver. 1) From Feras Daoud, Added the support for firmware log tracing, first by introducing the firmware API needed for the task and then For each PF do the following: 1- Allocate memory for the tracer strings database and read it from the FW to the SW. 2- Allocate and dma map tracer buffers. Traces that will be written into the buffer will be parsed as a group of one or more traces, referred to as trace message. The trace message represents a C-like printf string. Once a new trace is available FW will generate an event indicates new trace/s are available and the driver will parse them and dump them using tracepoints event tracing Enable mlx5 fw tracing by: echo 1 > /sys/kernel/debug/tracing/events/mlx5/mlx5_fw/enable Read traces by: cat /sys/kernel/debug/tracing/trace 2) From Roi Dayan, Remove redundant WARN when we cannot find neigh entry 3) From Jianbo Liu, TC double vlan support - Support offloading tc double vlan headers match - Support offloading double vlan push/pop tc actions 4) From Boris, re-visit UDP GSO, remove the splitting of UDP_GSO_L4 packets in the driver, and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. ==================== Signed-off-by:
-
- 23 Jul, 2018 9 commits
-
-
Boris Pismenny authored
This patch removes the splitting of UDP_GSO_L4 packets in the driver, and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack is not responsible for splitting the packet into two. Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Jianbo Liu authored
As we can configure two push/pop actions in one flow table entry, add support to offload those double vlan actions in a rule to HW. Signed-off-by:
Jianbo Liu <jianbol@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jianbo Liu authored
Extract actions offloading code to a new function, and also extend data structures for double vlan actions. Signed-off-by:
-
Jianbo Liu authored
We can match on both outer and inner vlan tags, add support for offloading that. Signed-off-by:
-
Roi Dayan authored
It is possible for neigh entry not to exist if it was cleaned already. When we bring down an interface the neigh gets deleted but it could be that our listener for neigh event to clear the encap valid bit didn't start yet and the neigh update last used work is started first. In this scenario the encap entry has valid bit set but the neigh entry doesn't exist. Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
Signed-off-by: -
Feras Daoud authored
Add the tracer file to the makefile and add the init function to the load one flow. Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Feras Daoud authored
For each message the driver should do the following: 1- Find the message string in the strings database 2- Count the param number of each message 3- Wait for the param events and accumulate them 4- Calculate the event timestamp using the local event timestamp and the first timestamp event following it. 5- Print message to trace log Enable the tracing by: echo 1 > /sys/kernel/debug/tracing/events/mlx5/mlx5_fw/enable Read traces by: cat /sys/kernel/debug/tracing/trace Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Feras Daoud authored
The tracer has one event, event 0x26, with two subtypes: - Subtype 0: Ownership change - Subtype 1: Traces available An ownership change occurs in the following cases: 1- Owner releases his ownership, in this case, an event will be sent to inform others to reattempt acquire ownership. 2- Ownership was taken by a higher priority tool, in this case the owner should understand that it lost ownership, and go through tear down flow. The second subtype indicates that there are traces in the trace buffer, in this case, the driver polls the tracer buffer for new traces, parse them and prepares the messages for printing. The HW starts tracing from the first address in the tracer buffer. Driver receives an event notifying that new trace block exists. HW posts a timestamp event at the last 8B of every 256B block. Comparing the timestamp to the last handled timestamp would indicate that this is a new trace block. Once the new timestamp is detected, the entire block is considered valid. Block validation and parsing, should be done after copying the current block to a different location, in order to avoid block overwritten during processing. Signed-off-by:
-
