The recent fix c4824ae7 ("ALSA: pcm: Fix mmap capability check")
restricts the mmap capability only to the drivers that properly set up
the buffers, but it caused a regression for a few drivers that manage
the buffer on its own way.

For those with UNKNOWN buffer type (i.e. the uninitialized / unused
substream->dma_buffer), just assume that the driver handles the mmap
properly and blindly trust the hardware info bit.

Fixes: c4824ae7 ("ALSA: pcm: Fix mmap capability check")
Reported-and-tested-by: Jeff Woods <jwoods@fnordco.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5him0gpghv.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The code refactoring to move the WC page handling into the common
memalloc layer caused a breakage for HD-audio HDMI.  I overlooked that
the driver is using the SG-buffer, which isn't covered by the patch.

This patch adds the mmap workaround for WC pages to SG-buffer
handler.  A caveat is that it falls back to the default handler by
returning an error after setting the pgprot, so it won't work in all
cases but merely for PCM (which is currently the only use case).

Fixes: 623c1010 ("ALSA: memalloc: Fix pgprot for WC mmap on x86")
Reported-and-tested-by: Andy Lavr <andy.lavr@gmail.com>
Link: https://lore.kernel.org/r/20210808080034.20337-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The ASUS GV301QH sound appears to work well with the quirk for
ALC294_FIXUP_ASUS_DUAL_SPK.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210807025805.27321-1-luke@ljones.devSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.14-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.14

Quite a lot of fixes here, the biggest set being for the cs42l42 driver
which is reasonably old but has seen a sudden uptick in activity.
There's also some fixes for correctly referencing PCM buffer addresses
and the removal of some driver-local bodges that had been done for the
lack of prefix handling in DAPM which were broken by the core handling
that as expected.

I2S always has two LRCLK phases and both CH1 and CH2 of the RX
must be enabled (corresponding to the low and high phases of LRCLK.)
The selection of the valid data channels is done by setting the DAC
CHA_SEL and CHB_SEL. CHA_SEL is always the first (left) channel,
CHB_SEL depends on the number of active channels.

Previously for mono ASP CH2 was not enabled, the result was playing
mono data would not produce any audio output.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 621d65f3 ("ASoC: cs42l42: Provide finer control on playback path")
Link: https://lore.kernel.org/r/20210805161111.10410-4-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The lowest valid SCLK corresponds to 44.1 kHz at 16-bit. Sample
rates less than this would produce SCLK below the minimum when using
a normal I2S frame. A constraint must be applied to prevent this.

The constraint is not applied if the machine driver sets SCLK, to
allow setups where the host generates additional bits per LRCLK
phase to increase the SCLK frequency. In these cases the machine
driver would always have to inform this driver of the actual SCLK,
and it must select a legal SCLK.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210805161111.10410-3-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

An I2S frame starts on the falling edge of LRCLK so ASP_STP must
be 0.

At the same time, move other format settings in the same register
from cs42l42_pll_config() to cs42l42_set_dai_fmt() where you'd
expect to find them, and merge into a single write.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20210805161111.10410-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Both SCLK and PLL clocks must be running to drive the glitch-free mux
behind MCLK_SRC_SEL and complete the switchover.

This patch moves the writing of MCLK_SRC_SEL to when the PLL is started
and stopped, so that it only transitions while the PLL is running.
The unconditional write MCLK_SRC_SEL=0 in cs42l42_mute_stream() is safe
because if the PLL is not running MCLK_SRC_SEL is already 0.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 43fc3571 ("ASoC: cs42l42: Set clock source for both ways of stream")
Link: https://lore.kernel.org/r/20210805161111.10410-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The recent refactoring of es1688 object creation with the use of
devres caused a problem with the non-PnP probe of GUS driver, as it
tries to probe multiple times with different parameters  That is, this
object needs the immediate resource release and the devres doesn't fit
for it.

This patch reverts partially the commit for restoring the classic
resource management for es1688 object.

Fixes: 1bb11c1c ("ALSA: es1688: Allocate resources with device-managed APIs")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/20210805032513.GA30485@xsang-OptiPlex-9020
Link: https://lore.kernel.org/r/20210805062148.30951-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Commit 6cdc01eb ("ALSA: pci/korg1212: remove 'set but not used'
warnings") missed one __maybe_unused, add to enable make W=1 sound/
compilation with x86_64 allmodconfig
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210804185442.274057-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

In the recent fix commit eda80d7c ("ALSA: memalloc: Fix regression
with SNDRV_DMA_TYPE_CONTINUOUS"), we replaced the pfn argument of the
remap_page_pfn() call from the uninitialized dmab->addr.  It was the
right fix, but it'd be more generic if we actually initialize
dmab->area for SNDRV_DMA_TYPE_CONTINOUS, too.  e.g. the field is used
in the common snd_sgbuf_get_addr(), too.

This patch adds the initialization of addr field and does revert of
the previous change to refer to it again in the mmap call.

Link: https://lore.kernel.org/r/20210804074125.8170-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We have a special handling of WC pages on x86, and it's currently
specific to HD-audio.  The last forgotten piece was the pgprot setup
for the mmap with WC pages.

This patch moves the pgprot setup for WC pages from HD-audio-specific
mmap callback to the common helper code.  It allows us to remove the
superfluous mmap callback in HD-audio and its prepare_mmap
redirection.

Link: https://lore.kernel.org/r/20210804061329.29265-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch simplifies the buffer pre-allocation code of sprd driver
with the standard managed buffer helper.  It uses the newly
introduced fixed-size buffer allocation helper.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-16-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch simplifies the buffer pre-allocation code of qcom qdsp6
driver with the standard managed buffer helper.  It uses the newly
introduced fixed-size buffer allocation helper.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210802072815.13551-15-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch simplifies the buffer pre-allocation code of qcom lpass
driver with the standard managed buffer helper.  It uses the newly
introduced fixed-size buffer allocation helper.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-14-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch simplifies the buffer pre-allocation code of fsl mpc5200
driver with the standard managed buffer helper.  It uses the newly
introduced fixed-size buffer allocation helper.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-13-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch simplifies the buffer pre-allocation code of fsl_dma
driver with the standard managed buffer helper.  It uses the newly
introduced fixed-size buffer allocation helper.

Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-12-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch simplifies the buffer pre-allocation code of fsl_asrc_dma
driver with the standard managed buffer helper.  It uses the newly
introduced fixed-size buffer allocation helper.

Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-11-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

As the standard buffer allocation helper supports WC pages now, we can
convert imx-pcm-rpmsg driver to use that.  This allows us to remove
lots of superfluous code.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-10-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

As the standard buffer allocation helper supports WC pages now, we can
convert imx-pcm-rpmsg driver to use that.  This allows us to remove
lots of superfluous code.

Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-9-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

As the standard buffer allocation helper supports WC pages now, we can
convert imx-pcm-fiq driver to use that.  This allows us to remove lots
of superfluous code.

Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-8-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

As the standard buffer allocation helper supports WC pages now, we can
convert bcm driver to use that.  This allows us to remove lots of
superfluous code.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-7-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Now with the recent addition of WC buffer allocation support, we can
use the standard PCM buffer allocation helpers for pxa2xx drivers.
This allows us to remove lots of superfluous code.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-6-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

There are the generic DMA API calls for allocating and managing the
pages with the write-combined attribute.  Let's use them for all
architectures but x86; x86 still needs the special handling to
override the page attributes.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

A few drivers want to have rather the exact buffer preallocation at
the driver probe time and keep using it for the whole operations
without allowing dynamic buffer allocation.  For satisfying the
demands, this patch extends the managed buffer allocation API
slightly.

Namely, when 0 is passed to max argument of the allocation helper
functions snd_pcm_set_managed_buffer*(), it treats as if the fixed
size allocation of the given size.  If the pre-allocation fails in
this mode, the function returns now -ENOMEM.  Otherwise, i.e. max
argument is non-zero, the function never returns -ENOMEM but tries to
fall back to the smaller chunks and allows the dynamic allocation
later -- which is still the default behavior until now.

For more intuitive use, also two new helpers are added for handling
the fixed size buffer allocation, too: snd_pcm_set_fixed_buffer() and
snd_pcm_set_fixed_buffer_all().
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

SNDRV_DMA_TYPE_DEV_UC and SNDRV_DMA_TYPE_DEV_UC_SG are incorrectly
named as if they were for the uncached memory, while actually we set
the pages as write-combined.  Rename them to reflect the right
attribute.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Return the pointer directly from alloc ops instead of setting
dmab->area at each place.  It simplifies the code a bit.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The driver was defining two ALSA controls that both change the same
register field for the wind noise filter corner frequency. The filter
response has two corners, at different frequencies, and the duplicate
controls most likely were an attempt to be able to set the value using
either of the frequencies.

However, having two controls changing the same field can be problematic
and it is unnecessary. Both frequencies are related to each other so
setting one implies exactly what the other would be.

Removing a control affects user-side code, but there is currently no
known use of the removed control so it would be best to remove it now
before it becomes a problem.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20210803160834.9005-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The underlying register field has inverted sense (0 = enabled) so
the control definition must be marked as inverted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20210803160834.9005-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Don't populate array names_to_check on the stack but instead it
static.  Makes the object code smaller by 56 bytes.  Also clean
up checkpatch warning by adding extra const for names_to_check
and pointer s.

Before:
    text    data     bss     dec     hex filename
  103512   34380       0  137892   21aa4 ./sound/usb/mixer.o

After:
    text    data     bss     dec     hex filename
  103264   34572       0  137836   21a6c ./sound/usb/mixer.o

(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210803122839.7143-1-colin.king@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

It turned out that the current implementation of the port subscription
is racy.  The subscription contains two linked lists, and we have to
add to or delete from both lists.  Since both connection and
disconnection procedures perform the same order for those two lists
(i.e. src list, then dest list), when a deletion happens during a
connection procedure, the src list may be deleted before the dest list
addition completes, and this may lead to a use-after-free or an Oops,
even though the access to both lists are protected via mutex.

The simple workaround for this race is to change the access order for
the disconnection, namely, dest list, then src list.  This assures
that the connection has been established when disconnecting, and also
the concurrent deletion can be avoided.
Reported-and-tested-by: folkert <folkert@vanheusden.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com
Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Checking that two values don't have common bits makes no sense,
strict equality is meant.

Fixes: f3b433e4  ("ASoC: SOF: Implement Probe IPC API")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802151749.15417-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The previous Kconfig cleanup added simplifications but also introduced
a new one by moving a boolean to a tristate. This leads to randconfig
problems.

This patch moves the select operations in the SOUNDWIRE_LINK_BASELINE
option. The INTEL_SOUNDWIRE config remains a tristate for backwards
compatibility with older configurations but is essentially an on/off
switch.

Fixes: cf5807f5 ('ASoC: SOF: Intel: SoundWire: simplify Kconfig')
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210802151628.15291-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer.  The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210731084331.32225-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

Just briefly described about the new option.

Link: https://lore.kernel.org/r/20210729074404.19728-6-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds a new module option, quirk_flags, for allowing user to
try some additional device-specific quirk behavior more easily.
When this option is set to non-zero, it overrides the quirk_flags, and
the specific workaround is applied.

Link: https://lore.kernel.org/r/20210729074404.19728-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The generic DSD raw detection is based on the known allow list, and we
can integrate it into quirk_flags, too.

Link: https://lore.kernel.org/r/20210729074404.19728-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The mixer code has a flag ignore_ctl_error for ignoring the errors
returned from the device wrt mixer accesses, and this is set from the
entries in mixer_maps.c, as well as ignore_ctl_error module option.
Those can be well integrated into the new quirk_flags field, too.

Link: https://lore.kernel.org/r/20210729074404.19728-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The auto-suspend suppression workaround for Lenovo machines are
handled in quirks-table.h.  Now it's more easier to handle with
quirk_flags.

Link: https://lore.kernel.org/r/20210729074404.19728-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>