- 17 Feb, 2022 4 commits
-
-
Leonardo Bras authored
During host/guest switch (like in kvm_arch_vcpu_ioctl_run()), the kernel swaps the fpu between host/guest contexts, by using fpu_swap_kvm_fpstate(). When xsave feature is available, the fpu swap is done by: - xsave(s) instruction, with guest's fpstate->xfeatures as mask, is used to store the current state of the fpu registers to a buffer. - xrstor(s) instruction, with (fpu_kernel_cfg.max_features & XFEATURE_MASK_FPSTATE) as mask, is used to put the buffer into fpu regs. For xsave(s) the mask is used to limit what parts of the fpu regs will be copied to the buffer. Likewise on xrstor(s), the mask is used to limit what parts of the fpu regs will be changed. The mask for xsave(s), the guest's fpstate->xfeatures, is defined on kvm_arch_vcpu_create(), which (in summary) sets it to all features supported by the cpu which are enabled on kernel config. This means that xsave(s) will save to guest buffer all the fpu regs contents the cpu has enabled when the guest is paused, even if they are not used. This would not be an issue, if xrstor(s) would also do that. xrstor(s)'s mask for host/guest swap is basically every valid feature contained in kernel config, except XFEATURE_MASK_PKRU. Accordingto kernel src, it is instead switched in switch_to() and flush_thread(). Then, the following happens with a host supporting PKRU starts a guest that does not support it: 1 - Host has XFEATURE_MASK_PKRU set. 1st switch to guest, 2 - xsave(s) fpu regs to host fpustate (buffer has XFEATURE_MASK_PKRU) 3 - xrstor(s) guest fpustate to fpu regs (fpu regs have XFEATURE_MASK_PKRU) 4 - guest runs, then switch back to host, 5 - xsave(s) fpu regs to guest fpstate (buffer now have XFEATURE_MASK_PKRU) 6 - xrstor(s) host fpstate to fpu regs. 7 - kvm_vcpu_ioctl_x86_get_xsave() copy guest fpstate to userspace (with XFEATURE_MASK_PKRU, which should not be supported by guest vcpu) On 5, even though the guest does not support PKRU, it does have the flag set on guest fpstate, which is transferred to userspace via vcpu ioctl KVM_GET_XSAVE. This becomes a problem when the user decides on migrating the above guest to another machine that does not support PKRU: the new host restores guest's fpu regs to as they were before (xrstor(s)), but since the new host don't support PKRU, a general-protection exception ocurs in xrstor(s) and that crashes the guest. This can be solved by making the guest's fpstate->user_xfeatures hold a copy of guest_supported_xcr0. This way, on 7 the only flags copied to userspace will be the ones compatible to guest requirements, and thus there will be no issue during migration. As a bonus, it will also fail if userspace tries to set fpu features (with the KVM_SET_XSAVE ioctl) that are not compatible to the guest configuration. Such features will never be returned by KVM_GET_XSAVE or KVM_GET_XSAVE2. Also, since kvm_vcpu_after_set_cpuid() now sets fpstate->user_xfeatures, there is not need to set it in kvm_check_cpuid(). So, change fpstate_realloc() so it does not touch fpstate->user_xfeatures if a non-NULL guest_fpu is passed, which is the case when kvm_check_cpuid() calls it. Signed-off-by:Leonardo Bras <leobras@redhat.com> Message-Id: <20220217053028.96432-2-leobras@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Anton Romanov authored
If vcpu has tsc_always_catchup set each request updates pvclock data. KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on host's side and do hypercall inside pvclock_read_retry loop leading to infinite loop in such situation. v3: Removed warn Changed return code to KVM_EFAULT v2: Added warn Signed-off-by:Anton Romanov <romanton@google.com> Message-Id: <20220216182653.506850-1-romanton@google.com> Signed-off-by:
-
Wanpeng Li authored
I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: <TASK> syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by:Wanpeng Li <wanpengli@tencent.com> Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
Aaron Lewis authored
Follow the precedent set by other architectures that support the VCPU ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP. This way, userspace can ensure that KVM_ENABLE_CAP is available on a vcpu before using it. Fixes: 5c919412 ("kvm/x86: Hyper-V synthetic interrupt controller") Signed-off-by:
Aaron Lewis <aaronlewis@google.com> Message-Id: <20220214212950.1776943-1-aaronlewis@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 14 Feb, 2022 2 commits
-
-
Jim Mattson authored
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by:
David Dunn <daviddunn@google.com> Signed-off-by:
-
Jim Mattson authored
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't drop the high nybble when setting up the config field of a perf_event_attr structure for a call to perf_event_create_kernel_counter(). Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
- 11 Feb, 2022 6 commits
-
-
Maxim Levitsky authored
If svm_deliver_avic_intr is called just after the target vcpu's AVIC got inhibited, it might read a stale value of vcpu->arch.apicv_active which can lead to the target vCPU not noticing the interrupt. To fix this use load-acquire/store-release so that, if the target vCPU is IN_GUEST_MODE, we're guaranteed to see a previous disabling of the AVIC. If AVIC has been disabled in the meanwhile, proceed with the KVM_REQ_EVENT-based delivery. Incomplete IPI vmexit has the same races as svm_deliver_avic_intr, and in fact it can be handled in exactly the same way; the only difference lies in who has set IRR, whether svm_deliver_interrupt or the processor. Therefore, svm_complete_interrupt_delivery can be used to fix incomplete IPI vmexits as well. Co-developed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
SVM has to set IRR for both the AVIC and the software-LAPIC case, so pull it up to the common function that handles both configurations. Signed-off-by: -
Maxim Levitsky authored
The check on the current CPU adds an extra level of indentation to svm_deliver_avic_intr and conflates documentation on what happens if the vCPU exits (of interest to svm_deliver_avic_intr) and migrates (only of interest to avic_ring_doorbell, which calls get/put_cpu()). Extract the wrmsr to a separate function and rewrite the comment in svm_deliver_avic_intr(). Co-developed-by:
-
Muhammad Usama Anjum authored
There is no vmx_pi_mmio_test file. Remove it to get rid of error while creation of selftest archive: rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3] Fixes: 6a581508 ("selftest: KVM: Add intra host migration tests") Reported-by:
"kernelci.org bot" <bot@kernelci.org> Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #3 - Fix pending state read of a HW interrupt
-
Marc Zyngier authored
It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always result in the pending interrupts being accurately reported if they are mapped to a HW interrupt. This is particularily visible when acking the timer interrupt and reading the GICR_ISPENDR1 register immediately after, for example (the interrupt appears as not-pending while it really is...). This is because a HW interrupt has its 'active and pending state' kept in the *physical* distributor, and not in the virtual one, as mandated by the spec (this is what allows the direct deactivation). The virtual distributor only caries the pending and active *states* (note the plural, as these are two independent and non-overlapping states). Fix it by reading the HW state back, either from the timer itself or from the distributor if necessary. Reported-by:
Ricardo Koller <ricarkol@google.com> Tested-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220208123726.3604198-1-maz@kernel.org
-
- 10 Feb, 2022 1 commit
-
-
David Woodhouse authored
There are circumstances whem kvm_xen_update_runstate_guest() should not sleep because it ends up being called from __schedule() when the vCPU is preempted: [ 222.830825] kvm_xen_update_runstate_guest+0x24/0x100 [ 222.830878] kvm_arch_vcpu_put+0x14c/0x200 [ 222.830920] kvm_sched_out+0x30/0x40 [ 222.830960] __schedule+0x55c/0x9f0 To handle this, make it use the same trick as __kvm_xen_has_interrupt(), of using the hva from the gfn_to_hva_cache directly. Then it can use pagefault_disable() around the accesses and just bail out if the page is absent (which is unlikely). I almost switched to using a gfn_to_pfn_cache here and bailing out if kvm_map_gfn() fails, like kvm_steal_time_set_preempted() does — but on closer inspection it looks like kvm_map_gfn() will *always* fail in atomic context for a page in IOMEM, which means it will silently fail to make the update every single time for such guests, AFAICT. So I didn't do it that way after all. And will probably fix that one too. Cc: stable@vger.kernel.org Fixes: 30b5c851 ("KVM: x86/xen: Add support for vCPU runstate information") Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <b17a93e5ff4561e57b1238e3e7ccd0b613eb827e.camel@infradead.org> Signed-off-by:
-
- 08 Feb, 2022 9 commits
-
-
Maxim Levitsky authored
asm/svm.h is the correct place for all values that are defined in the SVM spec, and that includes AVIC. Also add some values from the spec that were not defined before and will be soon useful. Signed-off-by:
-
Maxim Levitsky authored
kvm_apic_update_apicv is called when AVIC is still active, thus IRR bits can be set by the CPU after it is called, and don't cause the irr_pending to be set to true. Also logic in avic_kick_target_vcpu doesn't expect a race with this function so to make it simple, just keep irr_pending set to true and let the next interrupt injection to the guest clear it. Signed-off-by:
-
Maxim Levitsky authored
Fix a corner case in which the L1 hypervisor intercepts interrupts (INTERCEPT_INTR) and either doesn't set virtual interrupt masking (V_INTR_MASKING) or enters a nested guest with EFLAGS.IF disabled prior to the entry. In this case, despite the fact that L1 intercepts the interrupts, KVM still needs to set up an interrupt window to wait before injecting the INTR vmexit. Currently the KVM instead enters an endless loop of 'req_immediate_exit'. Exactly the same issue also happens for SMIs and NMI. Fix this as well. Note that on VMX, this case is impossible as there is only 'vmexit on external interrupts' execution control which either set, in which case both host and guest's EFLAGS.IF are ignored, or not set, in which case no VMexits are delivered. Signed-off-by:
-
Maxim Levitsky authored
KVM already honours few clean bits thus it makes sense to let the nested guest know about it. Note that KVM also doesn't check if the hardware supports clean bits, and therefore nested KVM was already setting clean bits and L0 KVM was already honouring them. Signed-off-by:
-
Maxim Levitsky authored
While RSM induced VM entries are not full VM entries, they still need to be followed by actual VM entry to complete it, unlike setting the nested state. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM, which fail due to this issue combined with lack of dirty bit setting. Signed-off-by:
-
Maxim Levitsky authored
While usually, restoring the smm state makes the KVM enter the nested guest thus a different vmcb (vmcb02 vs vmcb01), KVM should still mark it as dirty, since hardware can in theory cache multiple vmcbs. Failure to do so, combined with lack of setting the nested_run_pending (which is fixed in the next patch), might make KVM re-enter vmcb01, which was just exited from, with completely different set of guest state registers (SMM vs non SMM) and without proper dirty bits set, which results in the CPU reusing stale IDTR pointer which leads to a guest shutdown on any interrupt. On the real hardware this usually doesn't happen, but when running nested, L0's KVM does check and honour few dirty bits, causing this issue to happen. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM. Signed-off-by:
-
Maxim Levitsky authored
Turns out that due to review feedback and/or rebases I accidentally moved the call to nested_svm_load_cr3 to be too early, before the NPT is enabled, which is very wrong to do. KVM can't even access guest memory at that point as nested NPT is needed for that, and of course it won't initialize the walk_mmu, which is main issue the patch was addressing. Fix this for real. Fixes: 232f75d3 ("KVM: nSVM: call nested_svm_load_cr3 on nested state load") Cc: stable@vger.kernel.org Signed-off-by:
-
Maxim Levitsky authored
When the guest doesn't enable paging, and NPT/EPT is disabled, we use guest't paging CR3's as KVM's shadow paging pointer and we are technically in direct mode as if we were to use NPT/EPT. In direct mode we create SPTEs with user mode permissions because usually in the direct mode the NPT/EPT doesn't need to restrict access based on guest CPL (there are MBE/GMET extenstions for that but KVM doesn't use them). In this special "use guest paging as direct" mode however, and if CR4.SMAP/CR4.SMEP are enabled, that will make the CPU fault on each access and KVM will enter endless loop of page faults. Since page protection doesn't have any meaning in !PG case, just don't passthrough these bits. The fix is the same as was done for VMX in commit: commit 656ec4a4 ("KVM: VMX: fix SMEP and SMAP without EPT") This fixes the boot of windows 10 without NPT for good. (Without this patch, BSP boots, but APs were stuck in endless loop of page faults, causing the VM boot with 1 CPU) Signed-off-by:
-
Sean Christopherson authored
Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial to trigger from guest as it will fail on any destination APIC ID that doesn't exist from the guest's perspective. Don't bother recording anything in the kernel log, the common tracepoint for kvm_avic_incomplete_ipi() is sufficient for debugging. This reverts commit 37ef0c44. Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220204214205.3306634-2-seanjc@google.com> Signed-off-by:
-
- 06 Feb, 2022 18 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Various bug fixes for ext4 fast commit and inline data handling. Also fix regression introduced as part of moving to the new mount API" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fs/ext4: fix comments mentioning i_mutex ext4: fix incorrect type issue during replay_del_range jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}() ext4: fix potential NULL pointer dereference in ext4_fill_super() jbd2: refactor wait logic for transaction updates into a common function jbd2: cleanup unused functions declarations from jbd2.h ext4: fix error handling in ext4_fc_record_modified_inode() ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin() ext4: fix error handling in ext4_restore_inline_data() ext4: fast commit may miss file actions ext4: fast commit may not fallback for ineligible commit ext4: modify the logic of ext4_mb_new_blocks_simple ext4: prevent used blocks from being allocated during fast commit replay
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix display of grouped aliased events in 'perf stat'. - Add missing branch_sample_type to perf_event_attr__fprintf(). - Apply correct label to user/kernel symbols in branch mode. - Fix 'perf ftrace' system_wide tracing, it has to be set before creating the maps. - Return error if procfs isn't mounted for PID namespaces when synthesizing records for pre-existing processes. - Set error stream of objdump process for 'perf annotate' TUI, to avoid garbling the screen. - Add missing arm64 support to perf_mmap__read_self(), the kernel part got into 5.17. - Check for NULL pointer before dereference writing debug info about a sample. - Update UAPI copies for asound, perf_event, prctl and kvm headers. - Fix a typo in bpf_counter_cgroup.c. * tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf ftrace: system_wide collection is not effective by default libperf: Add arm64 support to perf_mmap__read_self() tools include UAPI: Sync sound/asound.h copy with the kernel sources perf stat: Fix display of grouped aliased events perf tools: Apply correct label to user/kernel symbols in branch mode perf bpf: Fix a typo in bpf_counter_cgroup.c perf synthetic-events: Return error if procfs isn't mounted for PID namespaces perf session: Check for NULL pointer before dereference perf annotate: Set error stream of objdump process for TUI perf tools: Add missing branch_sample_type to perf_event_attr__fprintf() tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Intel/PT: filters could crash the kernel - Intel: default disable the PMU for SMM, some new-ish EFI firmware has started using CPL3 and the PMU CPL filters don't discriminate against SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM cycles. - Fixup for perf_event_attr::sig_data * tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/pt: Fix crash with stop filters in single-range mode perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures selftests/perf_events: Test modification of perf_event_attr::sig_data perf: Copy perf_event_attr::sig_data on modification x86/perf: Default set FREEZE_ON_SMI for all
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: "Fix a potential truncated string warning triggered by gcc12" * tag 'objtool_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix truncated string warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: "Remove a bogus warning introduced by the recent PCI MSI irq affinity overhaul" * tag 'irq_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Remove bogus warning in pci_irq_get_affinity()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: "Fix altera and xgene EDAC drivers to propagate the correct error code from platform_get_irq() so that deferred probing still works" * tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/xgene: Fix deferred probing EDAC/altera: Fix deferred probing
-
Changbin Du authored
The ftrace.target.system_wide must be set before invoking evlist__create_maps(), otherwise it has no effect. Fixes: 53be5028 ("perf ftrace: Add 'latency' subcommand") Signed-off-by:
Changbin Du <changbin.du@gmail.com> Acked-by:
Namhyung Kim <namhyung@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Rob Herring authored
Add the arm64 variants for read_perf_counter() and read_timestamp(). Unfortunately the counter number is encoded into the instruction, so the code is a bit verbose to enumerate all possible counters. Tested-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Jiri Olsa <jolsa@redhat.com> Tested-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Picking the changes from: 06feec60 ("ASoC: hdmi-codec: Fix OOB memory accesses") Which entails no changes in the tooling side as it doesn't introduce new SNDRV_PCM_IOCTL_ ioctls. To silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.orgSigned-off-by:
-
Ian Rogers authored
An event may have a number of uncore aliases that when added to the evlist are consecutive. If there are multiple uncore events in a group then parse_events__set_leader_for_uncore_aliase will reorder the evlist so that events on the same PMU are adjacent. The collect_all_aliases function assumes that aliases are in blocks so that only the first counter is printed and all others are marked merged. The reordering for groups breaks the assumption and so all counts are printed. This change removes the assumption from collect_all_aliases that the events are in blocks and instead processes the entire evlist. Before: ``` $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1 Performance counter stats for 'system wide': CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 1,000,749,060 ns duration_time 1.000749060 seconds time elapsed ``` After: ``` Performance counter stats for 'system wide': CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 1,000,464,828 ns duration_time 1.000464828 seconds time elapsed ``` Fixes: 3cdc5c2c ("perf parse-events: Handle uncore event aliases in small groups properly") Reviewed-by:Andi Kleen <ak@linux.intel.com> Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Asaf Yaffe <asaf.yaffe@intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.comSigned-off-by:
-
German Gomez authored
In branch mode, the branch symbols were being displayed with incorrect cpumode labels. So fix this. For example, before: # perf record -b -a -- sleep 1 # perf report -b Overhead Command Source Shared Object Source Symbol Target Symbol 0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state ==> 0.08% cmd0 [kernel.kallsyms] [.] psi_group_change [.] psi_group_change 0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change After: # perf report -b Overhead Command Source Shared Object Source Symbol Target Symbol 0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state 0.08% cmd0 [kernel.kallsyms] [k] psi_group_change [k] pei_group_change 0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change Reviewed-by:James Clark <james.clark@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220126105927.3411216-1-german.gomez@arm.comSigned-off-by:
-
Masanari Iida authored
This patch fixes a spelling typo in error message. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.comSigned-off-by:
-
Leo Yan authored
For perf recording, it retrieves process info by iterating nodes in proc fs. If we run perf in a non-root PID namespace with command: # unshare --fork --pid perf record -e cycles -a -- test_program ... in this case, unshare command creates a child PID namespace and launches perf tool in it, but the issue is the proc fs is not mounted for the non-root PID namespace, this leads to the perf tool gathering process info from its parent PID namespace. We can use below command to observe the process nodes under proc fs: # unshare --pid --fork ls /proc 1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime 10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version 11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo 12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat 128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo 129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs 13 16 2094 241 31 40 54 68 asound fb kpageflags stat 130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps 131 17 2098 25 317 42 56 70 bus fs locks sys 132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger 133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc 134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self 135 19 2117 29 333 46 6 77 consoles irq mounts timer_list 136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty So it shows many existed tasks, since unshared command has not mounted the proc fs for the new created PID namespace, it still accesses the proc fs of the root PID namespace. This leads to two prominent issues: - Firstly, PID values are mismatched between thread info and samples. The gathered thread info are coming from the proc fs of the root PID namespace, but samples record its PID from the child PID namespace. - The second issue is profiled program 'test_program' returns its forked PID number from the child PID namespace, perf tool wrongly uses this PID number to retrieve the process info via the proc fs of the root PID namespace. To avoid issues, we need to mount proc fs for the child PID namespace with the option '--mount-proc' when use unshare command: # unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program Conversely, when the proc fs of the root PID namespace is used by child namespace, perf tool can detect the multiple PID levels and nsinfo__is_in_root_namespace() returns false, this patch reports error for this case: # unshare --fork --pid perf record -e cycles -a -- test_program Couldn't synthesize bpf events. Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace. Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command. Reviewed-by:
Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.orgSigned-off-by:
-
Ameer Hamza authored
Move NULL pointer check before dereferencing the variable. Addresses-Coverity: 1497622 ("Derereference before null check") Reviewed-by:Ameer Hamza <amhamza.mgc@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.comSigned-off-by:
-
Namhyung Kim authored
The stderr should be set to a pipe when using TUI. Otherwise it'd print to stdout and break TUI windows with an error message. Signed-off-by:
-
Anshuman Khandual authored
This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE. Suggested-by:
Anshuman Khandual <anshuman.khandual@arm.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes in: f6c6804c ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h") That just rebuilds perf, as these patches don't add any new KVM ioctl to be harvested for the the 'perf trace' ioctl syscall argument beautifiers. This is also by now used by tools/testing/selftests/kvm/, a simple test build succeeded. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Yf+4k5Fs5Q3HdSG9@kernel.orgSigned-off-by:
-
