- 06 Jun, 2013 4 commits
-
-
Dave Chinner authored
The inode unlinked list manipulations operate directly on the inode buffer, and so bypass the inode CRC calculation mechanisms. Hence an inode on the unlinked list has an invalid CRC. Fix this by recalculating the CRC whenever we modify an unlinked list pointer in an inode, ncluding during log recovery. This is trivial to do and results in unlinked list operations always leaving a consistent inode in the buffer. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Mark Tinguely <tinguely@sgi.com> Signed-off-by:
Ben Myers <bpm@sgi.com> (cherry picked from commit 0a32c26e)
-
Dave Chinner authored
There are several constraints that inode allocation and unlink logging impose on log recovery. These all stem from the fact that inode alloc/unlink are logged in buffers, but all other inode changes are logged in inode items. Hence there are ordering constraints that recovery must follow to ensure the correct result occurs. As it turns out, this ordering has been working mostly by chance than good management. The existing code moves all buffers except cancelled buffers to the head of the list, and everything else to the tail of the list. The problem with this is that is interleaves inode items with the buffer cancellation items, and hence whether the inode item in an cancelled buffer gets replayed is essentially left to chance. Further, this ordering causes problems for log recovery when inode CRCs are enabled. It typically replays the inode unlink buffer long before it replays the inode core changes, and so the CRC recorded in an unlink buffer is going to be invalid and hence any attempt to validate the inode in the buffer is going to fail. Hence we really need to enforce the ordering that the inode alloc/unlink code has expected log recovery to have since inode chunk de-allocation was introduced back in 2003... Signed-off-by:
-
Dave Chinner authored
When invalidating an attribute leaf block block, there might be remote attributes that it points to. With the recent rework of the remote attribute format, we have to make sure we calculate the length of the attribute correctly. We aren't doing that in xfs_attr3_leaf_inactive(), so fix it. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Mark Tinguely <tinuguely@sgi.com> Signed-off-by:
-
Dave Chinner authored
Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by:
-
- 30 May, 2013 14 commits
-
-
Dave Chinner authored
Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by:
-
Dave Chinner authored
xfs_attr3_leaf_compact() uses a temporary buffer for compacting the the entries in a leaf. It copies the the original buffer into the temporary buffer, then zeros the original buffer completely. It then copies the entries back into the original buffer. However, the original buffer has not been correctly initialised, and so the movement of the entries goes horribly wrong. Make sure the zeroed destination buffer is fully initialised, and once we've set up the destination incore header appropriately, write is back to the buffer before starting to move entries around. While debugging this, the _d/_s prefixes weren't sufficient to remind me what buffer was what, so rename then all _src/_dst. Signed-off-by:
-
Dave Chinner authored
xfs_attr3_leaf_unbalance() uses a temporary buffer for recombining the entries in two leaves when the destination leaf requires compaction. The temporary buffer ends up being copied back over the original destination buffer, so the header in the temporary buffer needs to contain all the information that is in the destination buffer. To make sure the temporary buffer is fully initialised, once we've set up the temporary incore header appropriately, write is back to the temporary buffer before starting to move entries around. Signed-off-by:
-
Dave Chinner authored
If we don't map the buffers correctly (same as for get/set operations) then the incore buffer lookup will fail. If a block number matches but a length is wrong, then debug kernels will ASSERT fail in _xfs_buf_find() due to the length mismatch. Ensure that we map the buffers correctly by basing the length of the buffer on the attribute data length rather than the remote block count. Signed-off-by:
-
Dave Chinner authored
When an attribute data does not fill then entire remote block, we zero the remaining part of the buffer. This, however, needs to take into account that the buffer has a header, and so the offset where zeroing starts and the length of zeroing need to take this into account. Otherwise we end up with zeros over the end of the attribute value when CRCs are enabled. While there, make sure we only ask to map an extent that covers the remaining range of the attribute, rather than asking every time for the full length of remote data. If the remote attribute blocks are contiguous with other parts of the attribute tree, it will map those blocks as well and we can potentially zero them incorrectly. We can also get buffer size mistmatches when trying to read or remove the remote attribute, and this can lead to not finding the correct buffer when looking it up in cache. Signed-off-by:
-
Dave Chinner authored
Reading a maximally size remote attribute fails when CRCs are enabled with this verification error: XFS (vdb): remote attribute header does not match required off/len/owner) There are two reasons for this, the first being that the length of the buffer being read is determined from the args->rmtblkcnt which doesn't take into account CRC headers. Hence the mapped length ends up being too short and so we need to calculate it directly from the value length. The second is that the byte count of valid data within a buffer is capped by the length of the data and so doesn't take into account that the buffer might be longer due to headers. Hence we need to calculate the data space in the buffer first before calculating the actual byte count of data. Signed-off-by:
-
Dave Chinner authored
When CRCs are enabled, there may be multiple allocations made if the headers cause a length overflow. This, however, does not mean that the number of headers required increases, as the second and subsequent extents may be contiguous with the previous extent. Hence when we map the extents to write the attribute data, we may end up with less extents than allocations made. Hence the assertion that we consume the number of headers we calculated in the allocation loop is incorrect and needs to be removed. Signed-off-by:
-
Dave Chinner authored
When the directory freespace index grows to a second block (2017 4k data blocks in the directory), the initialisation of the second new block header goes wrong. The write verifier fires a corruption error indicating that the block number in the header is zero. This was being tripped by xfs/110. The problem is that the initialisation of the new block is done just fine in xfs_dir3_free_get_buf(), but the caller then users a dirv2 structure to zero on-disk header fields that xfs_dir3_free_get_buf() has already zeroed. These lined up with the block number in the dir v3 header format. While looking at this, I noticed that the struct xfs_dir3_free_hdr() had 4 bytes of padding in it that wasn't defined as padding or being zeroed by the initialisation. Add a pad field declaration and fully zero the on disk and in-core headers in xfs_dir3_free_get_buf() so that this is never an issue in the future. Note that this doesn't change the on-disk layout, just makes the 32 bits of padding in the layout explicit. Signed-off-by:
-
Dave Chinner authored
Currently, swapping extents from one inode to another is a simple act of switching data and attribute forks from one inode to another. This, unfortunately in no longer so simple with CRC enabled filesystems as there is owner information embedded into the BMBT blocks that are swapped between inodes. Hence swapping the forks between inodes results in the inodes having mapping blocks that point to the wrong owner and hence are considered corrupt. To fix this we need an extent tree block or record based swap algorithm so that the BMBT block owner information can be updated atomically in the swap transaction. This is a significant piece of new work, so for the moment simply don't allow swap extent operations to succeed on CRC enabled filesystems. Signed-off-by:
-
Dave Chinner authored
Currently userspace has no way of determining that a filesystem is CRC enabled. Add a flag to the XFS_IOC_FSGEOMETRY ioctl output to indicate that the filesystem has v5 superblock support enabled. This will allow xfs_info to correctly report the state of the filesystem. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Dave Chinner authored
When CRCs are enabled, the number of blocks needed to hold a remote symlink on a 1k block size filesystem may be 2 instead of 1. The transaction reservation for the allocated blocks was not taking this into account and only allocating one block. Hence when trying to read or invalidate such symlinks, we are mapping a hole where there should be a block and things go bad at that point. Fix the reservation to use the correct block count, clean up the block count calculation similar to the remote attribute calculation, and add a debug guard to detect when we don't write the entire symlink to disk. Signed-off-by:
-
Dave Chinner authored
A long time ago in a galaxy far away.... .. the was a commit made to fix some ilinux specific "fragmented buffer" log recovery problem: http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=b29c0bece51da72fb3ff3b61391a391ea54e1603 That problem occurred when a contiguous dirty region of a buffer was split across across two pages of an unmapped buffer. It's been a long time since that has been done in XFS, and the changes to log the entire inode buffers for CRC enabled filesystems has re-introduced that corner case. And, of course, it turns out that the above commit didn't actually fix anything - it just ensured that log recovery is guaranteed to fail when this situation occurs. And now for the gory details. xfstest xfs/085 is failing with this assert: XFS (vdb): bad number of regions (0) in inode log format XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 1583 Largely undocumented factoid #1: Log recovery depends on all log buffer format items starting with this format: struct foo_log_format { __uint16_t type; __uint16_t size; .... As recoery uses the size field and assumptions about 32 bit alignment in decoding format items. So don't pay much attention to the fact log recovery thinks that it decoding an inode log format item - it just uses them to determine what the size of the item is. But why would it see a log format item with a zero size? Well, luckily enough xfs_logprint uses the same code and gives the same error, so with a bit of gdb magic, it turns out that it isn't a log format that is being decoded. What logprint tells us is this: Oper (130): tid: a0375e1a len: 28 clientid: TRANS flags: none BUF: #regs: 2 start blkno: 144 (0x90) len: 16 bmap size: 2 flags: 0x4000 Oper (131): tid: a0375e1a len: 4096 clientid: TRANS flags: none BUF DATA ---------------------------------------------------------------------------- Oper (132): tid: a0375e1a len: 4096 clientid: TRANS flags: none xfs_logprint: unknown log operation type (4e49) ********************************************************************** * ERROR: data block=2 * ********************************************************************** That we've got a buffer format item (oper 130) that has two regions; the format item itself and one dirty region. The subsequent region after the buffer format item and it's data is them what we are tripping over, and the first bytes of it at an inode magic number. Not a log opheader like there is supposed to be. That means there's a problem with the buffer format item. It's dirty data region is 4096 bytes, and it contains - you guessed it - initialised inodes. But inode buffers are 8k, not 4k, and we log them in their entirety. So something is wrong here. The buffer format item contains: (gdb) p /x *(struct xfs_buf_log_format *)in_f $22 = {blf_type = 0x123c, blf_size = 0x2, blf_flags = 0x4000, blf_len = 0x10, blf_blkno = 0x90, blf_map_size = 0x2, blf_data_map = {0xffffffff, 0xffffffff, .... }} Two regions, and a signle dirty contiguous region of 64 bits. 64 * 128 = 8k, so this should be followed by a single 8k region of data. And the blf_flags tell us that the type of buffer is a XFS_BLFT_DINO_BUF. It contains inodes. And because it doesn't have the XFS_BLF_INODE_BUF flag set, that means it's an inode allocation buffer. So, it should be followed by 8k of inode data. But we know that the next region has a header of: (gdb) p /x *ohead $25 = {oh_tid = 0x1a5e37a0, oh_len = 0x100000, oh_clientid = 0x69, oh_flags = 0x0, oh_res2 = 0x0} and so be32_to_cpu(oh_len) = 0x1000 = 4096 bytes. It's simply not long enough to hold all the logged data. There must be another region. There is - there's a following opheader for another 4k of data that contains the other half of the inode cluster data - the one we assert fail on because it's not a log format header. So why is the second part of the data not being accounted to the correct buffer log format structure? It took a little more work with gdb to work out that the buffer log format structure was both expecting it to be there but hadn't accounted for it. It was at that point I went to the kernel code, as clearly this wasn't a bug in xfs_logprint and the kernel was writing bad stuff to the log. First port of call was the buffer item formatting code, and the discontiguous memory/contiguous dirty region handling code immediately stood out. I've wondered for a long time why the code had this comment in it: vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; /* * You would think we need to bump the nvecs here too, but we do not * this number is used by recovery, and it gets confused by the boundary * split here * nvecs++; */ vecp++; And it didn't account for the extra vector pointer. The case being handled here is that a contiguous dirty region lies across a boundary that cannot be memcpy()d across, and so has to be split into two separate operations for xlog_write() to perform. What this code assumes is that what is written to the log is two consecutive blocks of data that are accounted in the buf log format item as the same contiguous dirty region and so will get decoded as such by the log recovery code. The thing is, xlog_write() knows nothing about this, and so just does it's normal thing of adding an opheader for each vector. That means the 8k region gets written to the log as two separate regions of 4k each, but because nvecs has not been incremented, the buf log format item accounts for only one of them. Hence when we come to log recovery, we process the first 4k region and then expect to come across a new item that starts with a log format structure of some kind that tells us whenteh next data is going to be. Instead, we hit raw buffer data and things go bad real quick. So, the commit from 2002 that commented out nvecs++ is just plain wrong. It breaks log recovery completely, and it would seem the only reason this hasn't been since then is that we don't log large contigous regions of multi-page unmapped buffers very often. Never would be a closer estimate, at least until the CRC code came along.... So, lets fix that by restoring the nvecs accounting for the extra region when we hit this case..... .... and there's the problemin log recovery it is apparently working around: XFS: Assertion failed: i == item->ri_total, file: fs/xfs/xfs_log_recover.c, line: 2135 Yup, xlog_recover_do_reg_buffer() doesn't handle contigous dirty regions being broken up into multiple regions by the log formatting code. That's an easy fix, though - if the number of contiguous dirty bits exceeds the length of the region being copied out of the log, only account for the number of dirty bits that region covers, and then loop again and copy more from the next region. It's a 2 line fix. Now xfstests xfs/085 passes, we have one less piece of mystery code, and one more important piece of knowledge about how to structure new log format items.. Signed-off-by:
-
Dave Chinner authored
XFS has failed to kill suid/sgid bits correctly when truncating files of non-zero size since commit c4ed4243 ("xfs: split xfs_setattr") introduced in the 3.1 kernel. Fix it. Fix it. cc: stable kernel <stable@vger.kernel.org> Signed-off-by:
-
Dave Chinner authored
Lockdep reports: ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #3 Not tainted --------------------------------------------- setquota/28368 is trying to acquire lock: (sb_internal){++++.?}, at: [<c11e8846>] xfs_trans_alloc+0x26/0x50 but task is already holding lock: (sb_internal){++++.?}, at: [<c11e8846>] xfs_trans_alloc+0x26/0x50 from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be allocated. xfs_qm_scall_setqlim() is starting a transaction and then not passing it into xfs_qm_dqet() and so it starts it's own transaction when allocating the dquot. Splat! Fix this by not allocating the dquot in xfs_qm_scall_setqlim() inside the setqlim transaction. This requires getting the dquot first (and allocating it if necessary) then dropping and relocking the dquot before joining it to the setqlim transaction. Reported-by:Michael L. Semon <mlsemon35@gmail.com> Signed-off-by:
-
- 24 May, 2013 7 commits
-
-
Dave Chinner authored
When reading a remote attribute, to correctly calculate the length of the data buffer for CRC enable filesystems, we need to know the length of the attribute data. We get this information when we look up the attribute, but we don't store it in the args structure along with the other remote attr information we get from the lookup. Add this information to the args structure so we can use it appropriately. Signed-off-by:
-
Dave Chinner authored
xfstests generic/117 fails with: XFS: Assertion failed: leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC) indicating a function that does not handle the attr3 format correctly. Fix it. Signed-off-by:
-
Dave Chinner authored
Signed-off-by:
-
Dave Chinner authored
There are several places where we use KM_SLEEP allocation contexts and use the fact that they are called from transaction context to add KM_NOFS where appropriate. Unfortunately, there are several places where the code makes this assumption but can be called from outside transaction context but with filesystem locks held. These places need explicit KM_NOFS annotations to avoid lockdep complaining about reclaim contexts. Signed-off-by:
-
Dave Chinner authored
Checking the EFI for whether it is being released from recovery after we've already released the known active reference is a mistake worthy of a brown paper bag. Fix the (now) obvious use after free that it can cause. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Dave Chinner authored
The offset passed into xfs_free_file_space() needs to be rounded down to a certain size, but the rounding mask is built by a 32 bit variable. Hence the mask will always mask off the upper 32 bits of the offset and lead to incorrect writeback and invalidation ranges. This is not actually exposed as a bug because we writeback and invalidate from the rounded offset to the end of the file, and hence the offset we are actually punching a hole out of will always be covered by the code. This needs fixing, however, if we ever want to use exact ranges for writeback/invalidation here... Signed-off-by:
-
Dave Chinner authored
FSX on 512 byte block size filesystems has been failing for some time with corrupted data. The fault dates back to the change in the writeback data integrity algorithm that uses a mark-and-sweep approach to avoid data writeback livelocks. Unfortunately, a side effect of this mark-and-sweep approach is that each page will only be written once for a data integrity sync, and there is a condition in writeback in XFS where a page may require two writeback attempts to be fully written. As a result of the high level change, we now only get a partial page writeback during the integrity sync because the first pass through writeback clears the mark left on the page index to tell writeback that the page needs writeback.... The cause is writing a partial page in the clustering code. This can happen when a mapping boundary falls in the middle of a page - we end up writing back the first part of the page that the mapping covers, but then never revisit the page to have the remainder mapped and written. The fix is simple - if the mapping boundary falls inside a page, then simple abort clustering without touching the page. This means that the next ->writepage entry that write_cache_pages() will make is the page we aborted on, and xfs_vm_writepage() will map all sections of the page correctly. This behaviour is also optimal for non-data integrity writes, as it results in contiguous sequential writeback of the file rather than missing small holes and having to write them a "random" writes in a future pass. With this fix, all the fsx tests in xfstests now pass on a 512 byte block size filesystem on a 4k page machine. Signed-off-by:
-
- 12 May, 2013 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing/kprobes update from Steven Rostedt: "The majority of these changes are from Masami Hiramatsu bringing kprobes up to par with the latest changes to ftrace (multi buffering and the new function probes). He also discovered and fixed some bugs in doing so. When pulling in his patches, I also found a few minor bugs as well and fixed them. This also includes a compile fix for some archs that select the ring buffer but not tracing. I based this off of the last patch you took from me that fixed the merge conflict error, as that was the commit that had all the changes I needed for this set of changes." * tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Support soft-mode disabling tracing/kprobes: Support ftrace_event_file base multibuffer tracing/kprobes: Pass trace_probe directly from dispatcher tracing/kprobes: Increment probe hit-count even if it is used by perf tracing/kprobes: Use bool for retprobe checker ftrace: Fix function probe when more than one probe is added ftrace: Fix the output of enabled_functions debug file ftrace: Fix locking in register_ftrace_function_probe() tracing: Add helper function trace_create_new_event() to remove duplicate code tracing: Modify soft-mode only if there's no other referrer tracing: Indicate enabled soft-mode in enable file tracing/kprobes: Fix to increment return event probe hit-count ftrace: Cleanup regex_lock and ftrace_lock around hash updating ftrace, kprobes: Fix a deadlock on ftrace_regex_lock ftrace: Have ftrace_regex_write() return either read or error tracing: Return error if register_ftrace_function_probe() fails for event_enable_func() tracing: Don't succeed if event_enable_func did not register anything ring-buffer: Select IRQ_WORK
-
- 11 May, 2013 4 commits
-
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull second SCSI update from James "Jaj B" Bottomley: "This is the final round of SCSI patches for the merge window. It consists mostly of driver updates (bnx2fc, ibmfc, fnic, lpfc, be2iscsi, pm80xx, qla4x and ipr). There's also the power management updates that complete the patches in Jens' tree, an iscsi refcounting problem fix from the last pull, some dif handling in scsi_debug fixes, a few nice code cleanups and an error handling busy bug fix." * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (92 commits) [SCSI] qla2xxx: Update firmware link in Kconfig file. [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type [SCSI] pm80xx: thermal, sas controller config and error handling update [SCSI] pm80xx: NCQ error handling changes [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers [SCSI] pm80xx: Changed module name and debug messages update [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files [SCSI] pm80xx: MSI-X implementation for using 64 interrupts [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve [SCSI] pm80xx: Multiple inbound/outbound queue configuration [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC [SCSI] lpfc: fix up Kconfig dependencies [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd [SCSI] sd: change to auto suspend mode [SCSI] sd: use REQ_PM in sd's runtime suspend operation [SCSI] qla4xxx: Fix iocb_cnt calculation in qla4xxx_send_mbox_iocb() [SCSI] ufs: Correct the expected data transfersize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull idle update from Len Brown: "Add support for new Haswell-ULT CPU idle power states" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: initial C8, C9, C10 support tools/power turbostat: display C8, C9, C10 residency
-
git://git.infradead.org/users/eparis/auditLinus Torvalds authored
Pull audit changes from Eric Paris: "Al used to send pull requests every couple of years but he told me to just start pushing them to you directly. Our touching outside of core audit code is pretty straight forward. A couple of interface changes which hit net/. A simple argument bug calling audit functions in namei.c and the removal of some assembly branch prediction code on ppc" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: fix message spacing printing auid Revert "audit: move kaudit thread start from auditd registration to kaudit init" audit: vfs: fix audit_inode call in O_CREAT case of do_last audit: Make testing for a valid loginuid explicit. audit: fix event coverage of AUDIT_ANOM_LINK audit: use spin_lock in audit_receive_msg to process tty logging audit: do not needlessly take a lock in tty_audit_exit audit: do not needlessly take a spinlock in copy_signal audit: add an option to control logging of passwords with pam_tty_audit audit: use spin_lock_irqsave/restore in audit tty code helper for some session id stuff audit: use a consistent audit helper to log lsm information audit: push loginuid and sessionid processing down audit: stop pushing loginid, uid, sessionid as arguments audit: remove the old depricated kernel interface audit: make validity checking generic audit: allow checking the type of audit message in the user filter audit: fix build break when AUDIT_DEBUG == 2 audit: remove duplicate export of audit_enabled Audit: do not print error when LSMs disabled ...
-
- 10 May, 2013 9 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Small fixes for two bugs and two warnings" * 'for-3.10' of git://linux-nfs.org/~bfields/linux: nfsd: fix oops when legacy_recdir_name_error is passed a -ENOENT error SUNRPC: fix decoding of optional gss-proxy xdr fields SUNRPC: Refactor gssx_dec_option_array() to kill uninitialized warning nfsd4: don't allow owner override on 4.1 CLAIM_FH opens
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform drivers from Matthew Garrett: "Small set of updates, mainly trivial bugfixes and some small updates to deal with newer hardware. There's also a new driver that allows qemu guests to notify the hypervisor that they've just paniced, which seems useful." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: Add support for fan button on Ideapad Z580 pvpanic: pvpanic device driver asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. X75A drivers: platform: x86: Use PTR_RET function sony-laptop: SVS151290S kbd backlight and gfx switch support hp-wmi: add more definitions for new event_id's dell-laptop: Fix krealloc() misuse in parse_da_table() hp_accel: Ignore the error from lis3lv02d_poweron() at resume dell: add new dell WMI format for the AIO machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signalLinus Torvalds authored
Pull stray syscall bits from Al Viro: "Several syscall-related commits that were missing from the original" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE unicore32: just use mmap_pgoff()... unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.10-rc1-ablkcipher' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs update from Tyler Hicks: "Improve performance when AES-NI (and most likely other crypto accelerators) is available by moving to the ablkcipher crypto API. The improvement is more apparent on faster storage devices. There's no noticeable change when hardware crypto is not available" * tag 'ecryptfs-3.10-rc1-ablkcipher' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Use the ablkcipher crypto API
-
git://git.infradead.org/~dwmw2/random-2.6Linus Torvalds authored
Pull misc fixes from David Woodhouse: "This is some miscellaneous cleanups that don't really belong anywhere else (or were ignored), that have been sitting in linux-next for some time. Two of them are fixes resulting from my audit of krealloc() usage that don't seem to have elicited any response when I posted them, and the other three are patches from Artem removing dead code." * tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6: pcmcia: remove RPX board stuff m68k: remove rpxlite stuff pcmcia: remove Motorola MBX860 support params: Fix potential memory leak in add_sysfs_param() dell-laptop: Fix krealloc() misuse in parse_da_table()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Gleb Natapov: "Most of the fixes are in the emulator since now we emulate more than we did before for correctness sake we see more bugs there, but there is also an OOPS fixed and corruption of xcr0 register." * tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: emulator: emulate SALC KVM: emulator: emulate XLAT KVM: emulator: emulate AAM KVM: VMX: fix halt emulation while emulating invalid guest sate KVM: Fix kvm_irqfd_init initialization KVM: x86: fix maintenance of guest/host xcr0 state
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper updates from Alasdair Kergon: "Allow devices that hold metadata for the device-mapper thin provisioning target to be extended easily; allow WRITE SAME on multipath devices; an assortment of little fixes and clean-ups." * tag 'dm-3.10-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (21 commits) dm cache: set config value dm cache: move config fns dm thin: generate event when metadata threshold passed dm persistent metadata: add space map threshold callback dm persistent data: add threshold callback to space map dm thin: detect metadata device resizing dm persistent data: support space map resizing dm thin: open dev read only when possible dm thin: refactor data dev resize dm cache: replace memcpy with struct assignment dm cache: fix typos in comments dm cache policy: fix description of lookup fn dm: document iterate_devices dm persistent data: fix error message typos dm cache: tune migration throttling dm mpath: enable WRITE SAME support dm table: fix write same support dm bufio: avoid a possible __vmalloc deadlock dm snapshot: fix error return code in snapshot_ctr dm cache: fix error return code in cache_create ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - fix usage of sleeping lock in atomic context from Jiri Kosina - build fix for hid-steelseries under certain .config setups by Simon Wood - simple mismerge fix from Fernando Luis Vázquez Cao * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: debug: fix RCU preemption issue HID: hid-steelseries fix led class build issue HID: reintroduce fix-up for certain Sony RF receivers
-
James Bottomley authored
Signed-off-by:James Bottomley <JBottomley@Parallels.com>
-
