- 08 Oct, 2018 40 commits
-
-
David Ahern authored
Update inet_netconf_dump_devconf, inet6_netconf_dump_devconf, and mpls_netconf_dump_devconf for strict data checking. If the flag is set, the dump request is expected to have an netconfmsg struct as the header. The struct only has the family member and no attributes can be appended. Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
Christian Brauner <christian@brauner.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Update ip6addrlbl_dump for strict data checking. If the flag is set, the dump request is expected to have an ifaddrlblmsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update fib_nl_dumprule for strict data checking. If the flag is set, the dump request is expected to have fib_rule_hdr struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update rtnl_net_dumpid for strict data checking. If the flag is set, the dump request is expected to have an rtgenmsg struct as the header which has the family as the only element. No data may be appended. Signed-off-by:
-
David Ahern authored
Update neightbl_dump_info for strict data checking. If the flag is set, the dump request is expected to have an ndtmsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update neigh_dump_info for strict data checking. If the flag is set, the dump request is expected to have an ndmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the NDA_IFINDEX and NDA_MASTER attributes are supported. Existing code does not fail the dump if nlmsg_parse fails. That behavior is kept for non-strict checking. Signed-off-by:
-
David Ahern authored
Add helper to check netlink message for route dumps. If the strict flag is set the dump request is expected to have an rtmsg struct as the header. All elements of the struct are expected to be 0 with the exception of rtm_flags (which is used by both ipv4 and ipv6 dumps) and no attributes can be appended. rtm_flags can only have RTM_F_CLONED and RTM_F_PREFIX set. Update inet_dump_fib, inet6_dump_fib, mpls_dump_routes, ipmr_rtm_dumproute, and ip6mr_rtm_dumproute to call this helper if strict data checking is enabled. Signed-off-by:
-
David Ahern authored
Update ipmr_rtm_dumplink for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update inet6_dump_ifinfo for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update rtnl_stats_dump for strict data checking. If the flag is set, the dump request is expected to have an if_stats_msg struct as the header. All elements of the struct are expected to be 0 except filter_mask which must be non-0 (legacy behavior). No attributes are supported. Signed-off-by:
-
David Ahern authored
Update rtnl_bridge_getlink for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFLA_EXT_MASK attribute is supported. Signed-off-by:
-
David Ahern authored
Update rtnl_dump_ifinfo for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID, IFLA_EXT_MASK, IFLA_MASTER, and IFLA_LINKINFO attributes are supported. Existing code does not fail the dump if nlmsg_parse fails. That behavior is kept for non-strict checking. Signed-off-by:
-
David Ahern authored
Update inet6_dump_addr for strict data checking. If the flag is set, the dump request is expected to have an ifaddrmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values suppored by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID attribute is supported. Follow on patches can add support for other fields (e.g., honor ifa_index and only return data for the given device index). Signed-off-by:
-
David Ahern authored
Update inet_dump_ifaddr for strict data checking. If the flag is set, the dump request is expected to have an ifaddrmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID attribute is supported. Follow on patches can support for other fields (e.g., honor ifa_index and only return data for the given device index). Signed-off-by:
-
David Ahern authored
Add a new socket option, NETLINK_DUMP_STRICT_CHK, that userspace can use via setsockopt to request strict checking of headers and attributes on dump requests. To get dump features such as kernel side filtering based on data in the header or attributes appended to the dump request, userspace must call setsockopt() for NETLINK_DUMP_STRICT_CHK and a non-zero value. Since the netlink sock and its flags are private to the af_netlink code, the strict checking flag is passed to dump handlers via a flag in the netlink_callback struct. For old userspace on new kernel there is no impact as all of the data checks in later patches are wrapped in a check on the new strict flag. For new userspace on old kernel, the setsockopt will fail and even if new userspace sets data in the headers and appended attributes the kernel will silently ignore it. Moving forward when the setsockopt succeeds, the new userspace on old kernel means the dump request can pass an attribute the kernel does not understand. The dump will then fail as the older kernel does not understand it. New userspace on new kernel setting the socket option gets the benefit of the improved data dump. Kernel side the NETLINK_DUMP_STRICT_CHK uapi is converted to a generic NETLINK_F_STRICT_CHK flag which can potentially be leveraged for tighter checking on the NEW, DEL, and SET commands. Signed-off-by:
-
David Ahern authored
Pull the inet6_fill_args arg up to in6_dump_addrs and move netnsid into it. Signed-off-by:
-
David Ahern authored
nla_parse is currently lenient on message parsing, allowing type to be 0 or greater than max expected and only logging a message "netlink: %d bytes leftover after parsing attributes in process `%s'." if the netlink message has unknown data at the end after parsing. What this could mean is that the header at the front of the attributes is actually wrong and the parsing is shifted from what is expected. Add a new strict version that actually fails with EINVAL if there are any bytes remaining after the parsing loop completes, if the atttrbitue type is 0 or greater than max expected. Signed-off-by: -
David Ahern authored
Make sure extack is passed to nlmsg_parse where easy to do so. Most of these are dump handlers and leveraging the extack in the netlink_callback. Signed-off-by:
-
David Ahern authored
Give a user a reason why EINVAL is returned in nlmsg_parse. Signed-off-by:
-
David Ahern authored
Declare extack in netlink_dump and pass to dump handlers via netlink_callback. Add any extack message after the dump_done_errno allowing error messages to be returned. This will be useful when strict checking is done on dump requests, returning why the dump fails EINVAL. Signed-off-by:
-
Gustavo A. R. Silva authored
Replace "--v-- fall through --v--" with a proper "fall through" annotation. Also, change "bad cid: fall through" to "fall through - bad cid". This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
David S. Miller authored
Jamal Hadi Salim says: ==================== net: sched: cls_u32 Various improvements Various improvements from Al. Changes from version 1: Add missing commit ==================== Signed-off-by: -
Al Viro authored
Now that we have the knode count, we can instantly check if any hnodes are non-empty. And that kills the check for extra references to root hnode - those could happen only if there was a knode to carry such a link. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Al Viro authored
allows to simplify u32_delete() considerably Signed-off-by:
-
Al Viro authored
Both hnode ->tp_c and tp_c argument of u32_set_parms() the latter is redundant, the former - never read... Signed-off-by:
-
Al Viro authored
It must be tc_u_common associated with that tp (i.e. tp->data). Proof: * both ->ht_up and ->tp_c are assign-once * ->tp_c of anything inserted into tp_c->hlist is tp_c * hnodes never get reinserted into the lists or moved between those, so anything found by u32_lookup_ht(tp->data, ...) will have ->tp_c equal to tp->data. * tp->root->tp_c == tp->data. * ->ht_up of anything inserted into hnode->ht[...] is equal to hnode. * knodes never get reinserted into hash chains or moved between those, so anything returned by u32_lookup_key(ht, ...) will have ->ht_up equal to ht. * any knode returned by u32_get(tp, ...) will have ->ht_up->tp_c point to tp->data Signed-off-by:
-
Al Viro authored
the only thing we used ht for was ht->tp_c and callers can get that without going through ->tp_c at all; start with lifting that into the callers, next commits will massage those, eventually removing ->tp_c altogether. Signed-off-by:
-
Al Viro authored
* calculate key *once*, not for each hash chain element * let tc_u_hash() return the pointer to chain head rather than index - callers are cleaner that way. Signed-off-by:
-
Al Viro authored
unused Signed-off-by:
-
Al Viro authored
not used anymore Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Tested by modifying iproute2 to allow sending a divisor > 255 Tested-by:
-
Al Viro authored
Operation makes no sense. Nothing will actually break if we do so (depth limit in u32_classify() will prevent infinite loops), but according to maintainers it's best prohibited outright. NOTE: doing so guarantees that u32_destroy() will trigger the call of u32_destroy_hnode(); we might want to make that unconditional. Test: tc qdisc add dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip prio 100 u32 \ link 800: offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff should fail with Error: cls_u32: Not linking to root node Signed-off-by:
-
Al Viro authored
... and produce consistent error on attempt to delete such. Existing check in u32_delete() is inconsistent - after tc qdisc add dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip prio 100 handle 1: u32 \ divisor 1 tc filter add dev eth0 parent ffff: protocol ip prio 200 handle 2: u32 \ divisor 1 both tc filter delete dev eth0 parent ffff: protocol ip prio 100 handle 801: u32 and tc filter delete dev eth0 parent ffff: protocol ip prio 100 handle 800: u32 will fail (at least with refcounting fixes), but the former will complain about an attempt to remove a busy table, while the latter will recognize it as root and yield "Not allowed to delete root node" instead. The problem with the existing check is that several tcf_proto instances might share the same tp->data and handle-to-hnode lookup will be the same for all of them. So comparing an hnode to be deleted with tp->root won't catch the case when one tp is used to try deleting the root of another. Solution is trivial - mark the root hnodes explicitly upon allocation and check for that. Signed-off-by:
-
David S. Miller authored
Quentin Schulz says: ==================== net: phy: mscc: add support for VSC8584 and VSC8574 Microsemi quad-port PHYs RESEND: rebased on top of latest net-next and on top of latest version of "net: phy: mscc: various improvements to Microsemi PHY driver" patch series. Both PHYs are 4-port PHY that are 10/100/1000BASE-T, 100BASE-FX, 1000BASE-X and triple-speed copper SFP capable, can communicate with the MAC via SGMII, QSGMII or 1000BASE-X, supports downshifting and can set the blinking pattern of each of its 4 LEDs, supports SyncE as well as HP Auto-MDIX detection. VSC8574 supports WOL and VSC8584 supports hardware offloading of MACsec. This patch series add support for 10/100/1000BASE-T, SGMII/QSGMII link with the MAC, downshifting, HP Auto-MDIX detection and blinking pattern for their 4 LEDs. They have also an internal Intel 8051 microcontroller whose firmware needs to be patched when the PHY is reset. If the 8051's firmware has the expected CRC, its patching can be skipped. The microcontroller can be accessed from any port of the PHY, though the CRC function can only be done through the PHY that is the base PHY of the package (internal address 0) due to a limitation of the firmware. The GPIO register bank is a set of registers that are common to all PHYs in the package. So any modification in any register of this bank affects all PHYs of the package. If the PHYs haven't been reset before booting the Linux kernel and were configured to use interrupts for e.g. link status updates, it is required to clear the interrupts mask register of all PHYs before being able to use interrupts with any PHY. The first PHY of the package that will be init will take care of clearing all PHYs interrupts mask registers. Thus, we need to keep track of the init sequence in the package, if it's already been done or if it's to be done. Most of the init sequence of a PHY of the package is common to all PHYs in the package, thus we use the SMI broadcast feature which enables us to propagate a write in one register of one PHY to all PHYs in the same package. We also introduce a new development board called PCB120 which exists in variants for VSC8584 and VSC8574 (and that's the only difference to the best of my knowledge). I suggest patches 1 to 3 go through net tree and patches 4 and 5 go through MIPS tree. Patches going through net tree and those going through MIPS tree do not depend on one another. This patch series depends on this patch series: (https://lore.kernel.org/lkml/20181008100728.24959-1-quentin.schulz@bootlin.com/) ==================== Signed-off-by:
-
Quentin Schulz authored
The VSC8574 PHY is a 4-ports PHY that is 10/100/1000BASE-T, 100BASE-FX, 1000BASE-X and triple-speed copper SFP capable, can communicate with the MAC via SGMII, QSGMII or 1000BASE-X, supports WOL, downshifting and can set the blinking pattern of each of its 4 LEDs, supports SyncE as well as HP Auto-MDIX detection. This adds support for 10/100/1000BASE-T, SGMII/QSGMII link with the MAC, WOL, downshifting, HP Auto-MDIX detection and blinking pattern for its 4 LEDs. The VSC8574 has also an internal Intel 8051 microcontroller whose firmware needs to be patched when the PHY is reset. If the 8051's firmware has the expected CRC, its patching can be skipped. The microcontroller can be accessed from any port of the PHY, though the CRC function can only be done through the PHY that is the base PHY of the package (internal address 0) due to a limitation of the firmware. The GPIO register bank is a set of registers that are common to all PHYs in the package. So any modification in any register of this bank affects all PHYs of the package. If the PHYs haven't been reset before booting the Linux kernel and were configured to use interrupts for e.g. link status updates, it is required to clear the interrupts mask register of all PHYs before being able to use interrupts with any PHY. The first PHY of the package that will be init will take care of clearing all PHYs interrupts mask registers. Thus, we need to keep track of the init sequence in the package, if it's already been done or if it's to be done. Most of the init sequence of a PHY of the package is common to all PHYs in the package, thus we use the SMI broadcast feature which enables us to propagate a write in one register of one PHY to all PHYs in the same package. Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by:
-
Quentin Schulz authored
The VSC8584 PHY is a 4-ports PHY that is 10/100/1000BASE-T, 100BASE-FX, 1000BASE-X and triple-speed copper SFP capable, can communicate with the MAC via SGMII, QSGMII or 1000BASE-X, supports downshifting and can set the blinking pattern of each of its 4 LEDs, supports hardware offloading of MACsec and supports SyncE as well as HP Auto-MDIX detection. This adds support for 10/100/1000BASE-T, SGMII/QSGMII link with the MAC, downshifting, HP Auto-MDIX detection and blinking pattern for its 4 LEDs. The VSC8584 has also an internal Intel 8051 microcontroller whose firmware needs to be patched when the PHY is reset. If the 8051's firmware has the expected CRC, its patching can be skipped. The microcontroller can be accessed from any port of the PHY, though the CRC function can only be done through the PHY that is the base PHY of the package (internal address 0) due to a limitation of the firmware. The GPIO register bank is a set of registers that are common to all PHYs in the package. So any modification in any register of this bank affects all PHYs of the package. If the PHYs haven't been reset before booting the Linux kernel and were configured to use interrupts for e.g. link status updates, it is required to clear the interrupts mask register of all PHYs before being able to use interrupts with any PHY. The first PHY of the package that will be init will take care of clearing all PHYs interrupts mask registers. Thus, we need to keep track of the init sequence in the package, if it's already been done or if it's to be done. Most of the init sequence of a PHY of the package is common to all PHYs in the package, thus we use the SMI broadcast feature which enables us to propagate a write in one register of one PHY to all PHYs in the same package. The revA of the VSC8584 PHY (which is not and will not be publicly released) should NOT patch the firmware of the microcontroller or it'll make things worse, the easiest way is just to not support it. Signed-off-by:
-
Quentin Schulz authored
The VSC8584 (and most likely other PHYs in the same generation) has two additional LED modes that can be picked, so let's add them. Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Quentin Schulz says: ==================== net: phy: mscc: various improvements to Microsemi PHY driver The Microsemi PHYs have multiple banks of registers (called pages). Registers can only be accessed from one page, if we need a register from another page, we need to switch the page and the registers of all other pages are not accessible anymore. Basically, to read register 5 from page 0, 1, 2, etc., you do the same phy_read(phydev, 5); but you need to set the desired page beforehand. In order to guarantee that two concurrent functions do not change the page, we need to do some locking per page. This can be achieved with the use of phy_select_page and phy_restore_page functions but phy_write/read calls in-between those two functions shall be replaced by their lock-free alternative __phy_write/read. The Microsemi PHYs have several counters so let's make them available as PHY statistics. The VSC 8530/31/40/41 also need to update their EEE init sequence in order to avoid packet losses and improve performance. This patch series also makes some minor cosmetic changes to the driver. v3: - add reviewed-by, - use phy_read/write/modify_paged whenever possible instead of the combo phy_select_page, __phy_read/write/modify, phy_restore_page when only one __phy_read/write/modify was executed, v2: - add patch to migrate MSCC driver to use phy_restore/select_page, - migrate all patches from v1 to use those two functions, - put the multiple lines of constants writes in an array and iterate over it to write the values, - add reviewed-bys, ==================== Signed-off-by: -
Quentin Schulz authored
Here, the rc variable is either used only for the condition right after the assignment or right before being used as the return value of the function it's being used in. So let's remove this unneeded temporary variable whenever possible. Reviewed-by:
-
