- 04 Mar, 2012 21 commits
-
-
Sarah Sharp authored
commit cab928ee upstream. On some systems with an Intel Panther Point xHCI host controller, the BIOS disables the xHCI PCI device during boot, and switches the xHCI ports over to EHCI. This allows the BIOS to access USB devices without having xHCI support. The downside is that the xHCI BIOS handoff mechanism will fail because memory mapped I/O is not enabled for the disabled PCI device. Jesse Barnes says this is expected behavior. The PCI core will enable BARs before quirks run, but it will leave it in an undefined state, and it may not have memory mapped I/O enabled. Make the generic USB quirk handler call pci_enable_device() to re-enable MMIO, and call pci_disable_device() once the host-specific BIOS handoff is finished. This will balance the ref counts in the PCI core. When the PCI probe function is called, usb_hcd_pci_probe() will call pci_enable_device() again. This should be back ported to kernels as old as 2.6.31. That was the first kernel with xHCI support, and no one has complained about BIOS handoffs failing due to memory mapped I/O being disabled on other hosts (EHCI, UHCI, or OHCI). Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by:
Oliver Neukum <oneukum@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bruno Thomsen authored
commit c6c1e449 upstream. Signed-off-by:
Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by:
-
Rabin Vincent authored
commit 8e43a905 upstream. Bootup with lockdep enabled has been broken on v7 since b46c0f74 ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Stephen Boyd authored
commit b46c0f74 upstream. armv7's flush_cache_all() flushes caches via set/way. To determine the cache attributes (line size, number of sets, etc.) the assembly first writes the CSSELR register to select a cache level and then reads the CCSIDR register. The CSSELR register is banked per-cpu and is used to determine which cache level CCSIDR reads. If the task is migrated between when the CSSELR is written and the CCSIDR is read the CCSIDR value may be for an unexpected cache level (for example L1 instead of L2) and incorrect cache flushing could occur. Disable interrupts across the write and read so that the correct cache attributes are read and used for the cache flushing routine. We disable interrupts instead of disabling preemption because the critical section is only 3 instructions and we want to call v7_dcache_flush_all from __v7_setup which doesn't have a full kernel stack with a struct thread_info. This fixes a problem we see in scm_call() when flush_cache_all() is called from preemptible context and sometimes the L2 cache is not properly flushed out. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
-
adam radford authored
commit 53ca3535 upstream. This small patch fixes a bug in the 3w-9xxx driver where it would load an invalid sgl address in the ioctl path even if request length was zero. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Andy Whitcroft authored
commit 323ef68f upstream. read() calls against a file descriptor connected to a directory are incorrectly returning EINVAL rather than EISDIR: [EISDIR] [XSI] [Option Start] The fildes argument refers to a directory and the implementation does not allow the directory to be read using read() or pread(). The readdir() function should be used instead. [Option End] This occurs because we do not have a .read operation defined for ecryptfs directories. Connect this up to generic_read_dir(). BugLink: http://bugs.launchpad.net/bugs/719691Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Alex Deucher authored
commit b7f5b7de upstream. MSI_REARM_EN register is a write only trigger register. There is no need RMW when re-arming. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=41668Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
commit f2ea0f5f upstream. Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
John Johansen authored
(backported from commit 76435548) Close a TOCTOU race for mounts done via ecryptfs-mount-private. The mount source (device) can be raced when the ownership test is done in userspace. Provide Ecryptfs a means to force the uid check at mount time. BugLink: http://bugs.launchpad.net/bugs/732628Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
Tyler Hicks <tyler.hicks@canonical.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Al Viro authored
(cherry picked from commit 4403158b) This is a seriously simplified patch from Eric Sandeen; copy of rationale follows: === mounting stacked ecryptfs on ecryptfs has been shown to lead to bugs in testing. For crypto info in xattr, there is no mechanism for handling this at all, and for normal file headers, we run into other trouble: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffa015b0b3>] ecryptfs_d_revalidate+0x43/0xa0 [ecryptfs] ... There doesn't seem to be any good usecase for this, so I'd suggest just disallowing the configuration. Based on a patch originally, I believe, from Mike Halcrow. === Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Tyler Hicks authored
backported from 38e3eaee Adrian reported that mkfontscale didn't work inside of eCryptfs mounts. Strace revealed the following: open("./", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = 3 fcntl64(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) open("./fonts.scale", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4 getdents(3, /* 80 entries */, 32768) = 2304 open("./.", O_RDONLY) = 5 fcntl64(5, F_SETFD, FD_CLOEXEC) = 0 fstat64(5, {st_mode=S_IFDIR|0755, st_size=16384, ...}) = 0 mmap2(NULL, 16384, PROT_READ, MAP_PRIVATE, 5, 0) = 0xb7fcf000 close(5) = 0 --- SIGBUS (Bus error) @ 0 (0) --- +++ killed by SIGBUS +++ The mmap2() on a directory was successful, resulting in a SIGBUS signal later. This patch removes mmap() from the list of possible ecryptfs_dir_fops so that mmap() isn't possible on eCryptfs directory files. http://bugs.launchpad.net/bugs/400443Reported-by:
Adrian C. <anrxc@sysphere.org> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Herbert Xu authored
commit 3a92d687 upstream. Unfortunately in reducing W from 80 to 16 we ended up unrolling the loop twice. As gcc has issues dealing with 64-bit ops on i386 this means that we end up using even more stack space (>1K). This patch solves the W reduction by moving LOAD_OP/BLEND_OP into the loop itself, thus avoiding the need to duplicate it. While the stack space still isn't great (>0.5K) it is at least in the same ball park as the amount of stack used for our C sha1 implementation. Note that this patch basically reverts to the original code so the diff looks bigger than it really is. Signed-off-by:
-
Herbert Xu authored
commit 58d7d18b upstream. The previous patch used the modulus operator over a power of 2 unnecessarily which may produce suboptimal binary code. This patch changes changes them to binary ands instead. Signed-off-by:
-
Nikolaus Schulz authored
commit 09e87e5c upstream. In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by:
Nikolaus Schulz <mail@microschulz.de> Signed-off-by:
-
OGAWA Hirofumi authored
commit d8521fcc upstream. ratelimit_state initialization of printk_ratelimited() seems broken. This fixes it by using DEFINE_RATELIMIT_STATE() to initialize spinlock properly. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Sven-Haegar Koch <haegar@sdinet.de> Signed-off-by:
-
Yong Zhang authored
commit bb1dc0ba upstream. When __ratelimit() returns 1 this means that we can go ahead. Signed-off-by:
Yong Zhang <yong.zhang@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Eliad Peller authored
commit 07ae2dfc upstream. The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by:
Eliad Peller <eliad@wizery.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Dan Carpenter authored
commit f6302f1b upstream. "subbuf_size" and "n_subbufs" come from the user and they need to be capped to prevent an integer overflow. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wu Fengguang authored
commit 3310225d upstream. PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs in the below lines of bdi_dirty_limit(): bdi_dirty *= numerator; do_div(bdi_dirty, denominator); 1) divide error: do_div() only uses the lower 32 bit of the denominator, which may trimmed to be 0 when PROP_MAX_SHIFT > 32. 2) overflow: (bdi_dirty * numerator) could easily overflow if numerator used up to 48 bits, leaving only 16 bits to bdi_dirty Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by:
Ilya Tumaykin <librarian_rus@yahoo.com> Tested-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Nikolaus Schulz authored
commit eb2f255b upstream. In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Daniel Vetter authored
commit e57b6886 upstream. According to a bug report, it doesn't have one. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
- 13 Feb, 2012 19 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit b1faf566 upstream. Correct sk_forward_alloc handling for error_queue would need to use a backlog of frames that softirq handler could not deliver because socket is owned by user thread. Or extend backlog processing to be able to process normal and error packets. Another possibility is to not use mem charge for error queue, this is what I implemented in this patch. Note: this reverts commit 29030374 (net: fix sk_forward_alloc corruptions), since we dont need to lock socket anymore. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: 单卫 <shanwei88@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 29030374 upstream. As David found out, sock_queue_err_skb() should be called with socket lock hold, or we risk sk_forward_alloc corruption, since we use non atomic operations to update this field. This patch adds bh_lock_sock()/bh_unlock_sock() pair to three spots. (BH already disabled) 1) skb_tstamp_tx() 2) Before calling ip_icmp_error(), in __udp4_lib_err() 3) Before calling ipv6_icmp_error(), in __udp6_lib_err() Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Axel Lin authored
commit b5266ea6 upstream. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Milan Kocian authored
commit 90451e69 upstream. Signed-off-by:
Milan Kocian <milon@wq.cz> Signed-off-by:
-
Jayachandran C authored
commit e4436a7c upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by:
Jayachandran C <jayachandranc@netlogicmicro.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Timo Juhani Lindfors authored
commit 683da59d upstream. ab943a2e (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Signed-off-by:
Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Arve Hjønnevåg authored
commit bd1eff97 upstream. Opening the binder driver and sharing the file returned with other processes (e.g. by calling fork) can crash the kernel. Prevent these crashes with the following changes: - Add a mutex to protect against two processes mmapping the same binder_proc. - After locking mmap_sem, check that the vma we want to access (still) points to the same mm_struct. - Use proc->tsk instead of current to get the files struct since this is where we get the rlimit from. Signed-off-by:
Arve Hjønnevåg <arve@android.com> Signed-off-by:
-
Arve Hjønnevåg authored
commit 3c1b86f1 upstream. If user-space partially unmaps the driver, binder_vma_open would dump the kernel stack. This is not a kernel bug however and will be treated as if the whole area was unmapped once binder_vma_close gets called. Signed-off-by:
-
Pekka Paalanen authored
commit 635032cb upstream. Programming an image was broken, because odev->buf_offs was not advanced for val == 0 in append_values(). This regression was introduced in: commit 1ff12a4a Author: Kevin A. Granade <kevin.granade@gmail.com> Date: Sat Sep 5 01:03:39 2009 -0500 Staging: asus_oled: Cleaned up checkpatch issues. Fix the image processing by special-casing val == 0. I have tested this change on an Asus G50V laptop only. Cc: Jakub Schmidtke <sjakub@gmail.com> Cc: Kevin A. Granade <kevin.granade@gmail.com> Signed-off-by:
Pekka Paalanen <pq@iki.fi> Signed-off-by:
-
Hubert Feurstein authored
commit 9f106503 upstream. An error was existing in the saving of CONTRAST_CTR register across suspend/resume. Signed-off-by:
Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Li Wang authored
commit 684a3ff7 upstream. ecryptfs_write() can enter an infinite loop when truncating a file to a size larger than 4G. This only happens on architectures where size_t is represented by 32 bits. This was caused by a size_t overflow due to it incorrectly being used to store the result of a calculation which uses potentially large values of type loff_t. [tyhicks@canonical.com: rewrite subject and commit message] Signed-off-by:
Li Wang <liwang@nudt.edu.cn> Signed-off-by:
Yunchuan Wen <wenyunchuan@kylinos.com.cn> Reviewed-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Rodrigo Vivi authored
commit 23bd15ec upstream. TV Out refresh rate was half of the specification for almost all modes. Due to this reason pixel clock was so low for some modes causing flickering screen. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
-
Jan Kara authored
commit 853a0c25 upstream. When we hit EIO while writing LVID, the buffer uptodate bit is cleared. This then results in an anoying warning from mark_buffer_dirty() when we write the buffer again. So just set uptodate flag unconditionally. Reviewed-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
-
Bian Naimeng authored
commit 5fe46e9d upstream. If NFSv4 client send a request before connect, or the old connection was broken because a ETIMEOUT error catched by call_status, ->send_request will return ENOSOCK, but rpc layer can not deal with it, so make sure ->send_request can translate ENOSOCK into ENOCONN. Signed-off-by:
Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Trond Myklebust authored
commit b0ed9dbc upstream. NFSv4 open recovery is currently broken: since we do not clear the state->flags states before attempting recovery, we end up with the 'can_open_cached()' function triggering. This again leads to no OPEN call being put on the wire. Reported-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit a9ed2e25 upstream. If our lease expires, and the server reboots while we're recovering, we need to be able to wait until the grace period is over. Signed-off-by:
-
Trond Myklebust authored
commit c8b7ae3d upstream. Signed-off-by:
-
Trond Myklebust authored
commit 4f7cdf18 upstream. nfs4_recovery_handle_error() will correctly handle errors such as NFS4ERR_CB_PATH_DOWN, however because they are still passed back to the main loop in nfs4_state_manager(), they can cause the latter to exit prematurely. Fix this by letting nfs4_recovery_handle_error() change the error value in cases where there is no action required by the caller. Signed-off-by:
-
