- 26 Aug, 2022 10 commits
-
-
Hans de Goede authored
Use MODULE_DEVICE_TABLE() instead of manually adding a bunch of MODULE_ALIAS() statements. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220822150818.45765-1-hdegoede@redhat.com
-
Arvid Norlander authored
The toshiba_acpi driver checks for TOS_INPUT_DATA_ERROR and tries a different format. On the Z830 the error returned is TOS_NOT_SUPPORTED though the different format still works. Allow either error. Signed-off-by:
Arvid Norlander <lkml@vorpal.se> Link: https://lore.kernel.org/r/20220821200821.1837460-2-lkml@vorpal.seReviewed-by:
-
Mario Limonciello authored
It was observed that on a Thinkpad T14 Gen1 (AMD) that the platform profile is starting up in 'low-power' mode after refreshing what the firmware had. This is most likely a firmware bug, but as a harmless workaround set the default profile to 'balanced' at thinkpad_acpi startup. Reported-by: madcatx@atlas.cz Link: https://bugzilla.kernel.org/show_bug.cgi?id=216347Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220819180101.6383-1-mario.limonciello@amd.comReviewed-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220818210058.7229-1-wsa+renesas@sang-engineering.comReviewed-by:
-
PaddyKP_Yao authored
According to well-known-leds.txt, we should use "platform::micmute" instead of "asus::micmute" for the name of the mic-mute LED classdev. Signed-off-by:
PaddyKP_Yao <PaddyKP_Yao@asus.com> Reviewed-by:
-
Luke D. Jones authored
Adds support for setting various power states of TUF keyboards. These states are combinations of: - boot, set if a boot animation is shown on keyboard - awake, set if the keyboard LEDs are visible while laptop is on - sleep, set if an animation is displayed while the laptop is suspended - keyboard (unknown effect) Adds two sysfs attributes to asus::kbd_backlight: - kbd_rgb_state - kbd_rgb_state_index Signed-off-by:
Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20220825232251.345893-3-luke@ljones.devReviewed-by:
-
Luke D. Jones authored
Adds support for changing the laptop keyboard LED mode and colour. The modes are visible effects such as static, rainbow, pulsing, colour cycles. These sysfs attributes are added to asus::kbd_backlight: - kbd_rgb_mode - kbd_rgb_mode_index Signed-off-by:
-
Luke D. Jones authored
Add support for TUF laptops which have the ability to control the GPU fan. This will show as a second fan in hwmon, and has the ability to run as boost (fullspeed), or auto. Signed-off-by:
-
Luke D. Jones authored
Some more recent TUF laptops have both fan_boost and thermal_throttle. The key code for Fn+F5 is also different and unmapped. This patch adjusts the asus_wmi_handle_event_code() match to match for both 0x99 and 0xAE, and run both mode switch functions for fan_boost and/or thermal_throttle if either are available. It is required that both are tried, as in some instances the ACPI set-method for one may not have any code body within it even though it was returned as supported by the get method. Signed-off-by:
-
Hans de Goede authored
Document how to select asus_wmi_lid_flip_rog_devid as tablet_switch_mode by adding "3:lid-flip-rog" to the tablet_mode_sw module-param help text. Signed-off-by:
-
- 25 Aug, 2022 25 commits
-
-
Hans de Goede authored
Simplify tablet-mode-switch handling: 1. The code is the same for all variants, the only difference is the dev_id and notify event code. Store the dev_id + code in struct asus_wmi and unify the handling 2. Make the new unified asus_wmi_tablet_mode_get_state() check dev_id has been set and make it a no-op when not set. This allows calling it unconditionally at resume/restore time 3. Simplify the tablet_mode_sw module-param handling, this also allows selecting the new lid-flip-rog type through the module-param. Cc: Luke D. Jones <luke@ljones.dev> Signed-off-by:
-
Hans de Goede authored
The 3 different tablet-mode-switch initialization paths repeat a lot of the same code. Add a helper function for this. This also makes the error-handling for the kbd_dock_devid case consistent with the other 2 cases. Cc: Luke D. Jones <luke@ljones.dev> Signed-off-by:
-
Luke D. Jones authored
Add quirk for ASUS ROG X13 Flow 2-in-1 to enable tablet mode with lid flip (all screen rotations). Signed-off-by:
-
Luke D. Jones authored
Due to multiple types of tablet/lidflip, the existing code for handling these events is refactored to use an enum for each type. Signed-off-by:
-
Luke D. Jones authored
Support the hardware GPU MUX switch available on some models. This switch can toggle the MUX between: - 0, Dedicated mode - 1, Optimus mode Optimus mode is the regular iGPU + dGPU available, while dedicated mode switches the system to have only the dGPU available. Signed-off-by:
-
Hans de Goede authored
After the recent cleanup patches, some of the *_check_present() helpers just propagate the result of asus_wmi_dev_is_present(). Replace these with direct asus_wmi_dev_is_present() calls as a further cleanup. Cc: Luke D. Jones <luke@ljones.dev> Signed-off-by:
-
Luke D. Jones authored
The settings for these attributes can be read from the device, this is now done instead of reading a stored value from module. The stored value is also removed. This means the simpler asus_wmi_dev_is_present() can be used in *_check_present() - it is not an error for these methods to be missing. The _write() functions have their bodies shifted in to *_store() which simplifies things further. Signed-off-by:
-
Luke D. Jones authored
The settings for these attributes can be read from the device, this is now done instead of reading a stored value from module. The stored value is also removed. This means the simpler asus_wmi_dev_is_present() can be used in *_check_present() - it is not an error for these methods to be missing. The _write() functions have their bodies shifted in to *_store() which simplifies things further. Signed-off-by:
-
Luke D. Jones authored
The settings for these attributes can be read from the device, this is now done instead of reading a stored value from module. The stored value is also removed. This means the simpler asus_wmi_dev_is_present() can be used in *_check_present() - it is not an error for these methods to be missing. The _write() functions have their bodies shifted in to *_store() which simplifies things further. Signed-off-by:
-
Luke D. Jones authored
The panel_od attribute was not documented, this adds the required documentation. Fixes: ca91ea34 ("asus-wmi: Add panel overdrive functionality") Signed-off-by:
-
Luke D. Jones authored
The egpu_enable attribute was not documented, this adds the required documentation. Fixes: 382b91db ("asus-wmi: Add egpu enable method") Signed-off-by:
-
Luke D. Jones authored
The dgpu_disable attribute was not documented, this adds the required documentation. Fixes: 98829e84 ("asus-wmi: Add dgpu disable method") Signed-off-by:
-
ye xingchen authored
Use kobj_to_dev() instead of open-coding it. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220811013203.16010-1-ye.xingchen@zte.com.cnReviewed-by:
-
Luke D. Jones authored
This changes all *_show attributes in asus-wmi.c to use sysfs_emit() instead of the older method of writing to the output buffer manually. Signed-off-by:
-
Maximilian Luz authored
Add software nodes for the HID sensor collection and the UCM UCSI HID client to the Surface Pro 8. In contrast to the type-cover devices, these devices are directly attached to the SAM controller, without any hub. This enables support for HID-based sensors, including the ones used for automatic screen rotation, on the Surface Pro 8. Signed-off-by:
-
Maximilian Luz authored
On Windows, the HID devices with target ID 1 are grouped as "Surface Hot Plug - SAM". Rename their device nodes in the registry to reflect that and update the comments accordingly. Signed-off-by:
-
Maximilian Luz authored
Rename HID device nodes based on their function. In particular, these are nodes for firmware updates via the CFU mechanism (component firmware update), HID based sensors, and a USB-C UCSI client. Signed-off-by:
-
Maximilian Luz authored
The Surface Laptop Go 2 seems to have the same SAM client devices as the Surface Laptop Go 1, so re-use its node group. Signed-off-by:
-
Hans de Goede authored
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with the Android BIOS and it is causing problems with the Windows BIOS version. Specifically when trying to register the already present touchscreen x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks the working of the touchscreen and also leads to an oops: [ 14.248946] ------------[ cut here ]------------ [ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00' [ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry ... [ 14.249293] unregister_irq_proc+0xe0/0x100 [ 14.249305] free_desc+0x29/0x70 [ 14.249312] irq_free_descs+0x4b/0x80 [ 14.249320] mp_unmap_irq+0x5c/0x60 [ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40 [ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets] [ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets] Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS is in use and exits with -ENODEV in that case, fixing this. Fixes: 84c2dcdd ("platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info") Signed-off-by:
-
Andy Shevchenko authored
The style of the comments is not uniform, make it so and fix a few grammar issues. While at it, update Copyright years. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220801113734.36131-4-andriy.shevchenko@linux.intel.comReviewed-by:
-
Andy Shevchenko authored
Make terminator entry uniform by dropping: - trailing commas - anything inside curly braces Signed-off-by:
-
Andy Shevchenko authored
Not everyone can get what "critclks" means in the message, improve it to make less cryptic. Signed-off-by:
-
Andy Shevchenko authored
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by:
-
Greg Kroah-Hartman authored
The driver core supports the ability to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting this driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Cc: Perry Yuan <Perry.Yuan@dell.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: Dell.Client.Kernel@dell.com Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220729115302.2258296-1-gregkh@linuxfoundation.orgReviewed-by:
-
Hans de Goede authored
-
- 24 Aug, 2022 2 commits
-
-
Shyam Sundar S K authored
variable 'mode' is used uninitialized whenever switch default is taken in sps.c which leads to the following clang warning. drivers/platform/x86/amd/pmf/sps.c:96:2: error: variable 'mode' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized] default: ^~~~~~~ drivers/platform/x86/amd/pmf/sps.c:101:9: note: uninitialized use occurs here return mode; ^~~~ drivers/platform/x86/amd/pmf/sps.c:84:9: note: initialize the variable 'mode' to silence this warning u8 mode; ^ = '\0' 1 error generated. Fix it by returning -EOPNOTSUPP in default case and also change the return type of the function amd_pmf_get_pprof_modes() to keep it similar like other drivers which implement platform_profile. Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature") Reported-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20220822062917.4061503-1-Shyam-sundar.S-k@amd.comReviewed-by:
-
Shyam Sundar S K authored
Its reported that amd-pmf driver when built with config which does not have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to symbols used. ld: vmlinux.o: in function `amd_pmf_init_sps': drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register' ld: vmlinux.o: in function `amd_pmf_deinit_sps': drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove' Fix it by adding a "select" to the Kconfig. Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 15 Aug, 2022 3 commits
-
-
Shyam Sundar S K authored
Update the MAINTAINERS file with AMD PMF driver details. Reviewed-by:
-
Shyam Sundar S K authored
Some of the older platforms with _HID "AMDI0100" PMF driver can be force loaded by interested users but only for experimental purposes. Reviewed-by:
-
Shyam Sundar S K authored
The transition to auto-mode happens when the PMF driver receives AMT (Auto Mode transition) event. transition logic will reside in the PMF driver but the events would come from other supported drivers[1]. The thermal parameters would vary between when a performance "on-lap" mode is detected and versus when not. The CQL event would get triggered from other drivers, so that PMF driver would adjust the system thermal config based on the ACPI inputs. OEMs can control whether or not to enable AMT or CQL via other supported drivers[1] but the actual transition logic resides in the AMD PMF driver. When an AMT event is received the automatic mode transition RAPL algorithm will run. When a CQL event is received an performance "on-lap" mode will be enabled and thermal parameters will be adjusted accordingly. [1] Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Mark Pearson <markpearson@lenovo.com> Signed-off-by:
-
