Skip to content

L
linux
Switch branch/tag
  1. 11 Aug, 2017 15 commits
    • Nicholas Bellinger's avatar
      iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP · ae059833
      Nicholas Bellinger authored 
      commit 105fa2f4 upstream.

This patch fixes a BUG() in iscsit_close_session() that could be
triggered when iscsit_logout_post_handler() execution from within
tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP
(15 seconds), and the TCP connection didn't already close before
then forcing tx thread context to automatically exit.

This would manifest itself during explicit logout as:

[33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179
[33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs
[33209.078643] ------------[ cut here ]------------
[33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346!

Normally when explicit logout attempt fails, the tx thread context
exits and iscsit_close_connection() from rx thread context does the
extra cleanup once it detects conn->conn_logout_remove has not been
cleared by the logout type specific post handlers.

To address this special case, if the logout post handler in tx thread
context detects conn->tx_thread_active has already been cleared, simply
return and exit in order for existing iscsit_close_connection()
logic from rx thread context do failed logout cleanup.
Reported-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
Tested-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Tested-by: default avatarGary Guo <ghg@datera.io>
Tested-by: default avatarChu Yuan Lin <cyl@datera.io>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ae059833
    • Nicholas Bellinger's avatar
      iscsi-target: Fix initial login PDU asynchronous socket close OOPs · bf54cf1e
      Nicholas Bellinger authored 
      commit 25cdda95 upstream.

This patch fixes a OOPs originally introduced by:

   commit bb048357
   Author: Nicholas Bellinger <nab@linux-iscsi.org>
   Date:   Thu Sep 5 14:54:04 2013 -0700

   iscsi-target: Add sk->sk_state_change to cleanup after TCP failure

which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.

To address this issue, this patch makes the following changes.

First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.

Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running.  For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().

The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed.  For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.

Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.
Reported-by: default avatarMike Christie <mchristi@redhat.com>
Reviewed-by: default avatarMike Christie <mchristi@redhat.com>
Tested-by: default avatarMike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Reported-by: default avatarHannes Reinecke <hare@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Varun Prakash <varun@chelsio.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bf54cf1e
    • Nicholas Bellinger's avatar
      iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race · cf4ab9d5
      Nicholas Bellinger authored 
      commit 8f0dfb3d upstream.

There is a iscsi-target/tcp login race in LOGIN_FLAGS_READY
state assignment that can result in frequent errors during
iscsi discovery:

      "iSCSI Login negotiation failed."

To address this bug, move the initial LOGIN_FLAGS_READY
assignment ahead of iscsi_target_do_login() when handling
the initial iscsi_target_start_negotiation() request PDU
during connection login.

As iscsi_target_do_login_rx() work_struct callback is
clearing LOGIN_FLAGS_READ_ACTIVE after subsequent calls
to iscsi_target_do_login(), the early sk_data_ready
ahead of the first iscsi_target_do_login() expects
LOGIN_FLAGS_READY to also be set for the initial
login request PDU.

As reported by Maged, this was first obsered using an
MSFT initiator running across multiple VMWare host
virtual machines with iscsi-target/tcp.
Reported-by: default avatarMaged Mokhtar <mmokhtar@binarykinetics.com>
Tested-by: default avatarMaged Mokhtar <mmokhtar@binarykinetics.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cf4ab9d5
    • Jiang Yi's avatar
      iscsi-target: Always wait for kthread_should_stop() before kthread exit · 119903dc
      Jiang Yi authored 
      commit 5e0cf5e6 upstream.

There are three timing problems in the kthread usages of iscsi_target_mod:

 - np_thread of struct iscsi_np
 - rx_thread and tx_thread of struct iscsi_conn

In iscsit_close_connection(), it calls

 send_sig(SIGINT, conn->tx_thread, 1);
 kthread_stop(conn->tx_thread);

In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().

So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.

This is invalid according to the documentation of kthread_stop().

(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
 early iscsi_target_rx_thread failure case - nab)
Signed-off-by: default avatarJiang Yi <jiangyilism@gmail.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      119903dc
    • Nicholas Bellinger's avatar
      target: Avoid mappedlun symlink creation during lun shutdown · 2bf7791c
      Nicholas Bellinger authored 
      commit 49cb77e2 upstream.

This patch closes a race between se_lun deletion during configfs
unlink in target_fabric_port_unlink() -> core_dev_del_lun()
-> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks
waiting for percpu_ref RCU grace period to finish, but a new
NodeACL mappedlun is added before the RCU grace period has
completed.

This can happen in target_fabric_mappedlun_link() because it
only checks for se_lun->lun_se_dev, which is not cleared until
after transport_clear_lun_ref() percpu_ref RCU grace period
finishes.

This bug originally manifested as NULL pointer dereference
OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on
v4.1.y code, because it dereferences lun->lun_se_dev without
a explicit NULL pointer check.

In post v4.1 code with target-core RCU conversion, the code
in target_stat_scsi_att_intr_port_show_attr_dev() no longer
uses se_lun->lun_se_dev, but the same race still exists.

To address the bug, go ahead and set se_lun>lun_shutdown as
early as possible in core_tpg_remove_lun(), and ensure new
NodeACL mappedlun creation in target_fabric_mappedlun_link()
fails during se_lun shutdown.
Reported-by: default avatarJames Shen <jcs@datera.io>
Cc: James Shen <jcs@datera.io>
Tested-by: default avatarJames Shen <jcs@datera.io>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2bf7791c
    • Prabhakar Lad's avatar
      media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl · fa95dfc7
      Prabhakar Lad authored 
      commit da05d52d upstream.

this patch makes sure VPFE_CMD_S_CCDC_RAW_PARAMS ioctl no longer works
for vpfe_capture driver with a minimal patch suitable for backporting.

- This ioctl was never in public api and was only defined in kernel header.
- The function set_params constantly mixes up pointers and phys_addr_t
  numbers.
- This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is
  described as an 'experimental ioctl that will change in future kernels'.
- The code to allocate the table never gets called after we copy_from_user
  the user input over the kernel settings, and then compare them
  for inequality.
- We then go on to use an address provided by user space as both the
  __user pointer for input and pass it through phys_to_virt to come up
  with a kernel pointer to copy the data to. This looks like a trivially
  exploitable root hole.

Due to these reasons we make sure this ioctl now returns -EINVAL and backport
this patch as far as possible.

Fixes: 5f15fbb6 ("V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver")
Signed-off-by: default avatarLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fa95dfc7
    • Gregory CLEMENT's avatar
      ARM: dts: armada-38x: Fix irq type for pca955 · 3c2bf2bd
      Gregory CLEMENT authored 
      commit 8d451417 upstream.

As written in the datasheet the PCA955 can only handle low level irq and
not edge irq.

Without this fix the interrupt is not usable for pca955: the gpio-pca953x
driver already set the irq type as low level which is incompatible with
edge type, then the kernel prevents using the interrupt:

"irq: type mismatch, failed to map hwirq-18 for
/soc/internal-regs/gpio@18100!"

Fixes: 928413bd ("ARM: mvebu: Add Armada 388 General Purpose
Development Board support")
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3c2bf2bd
    • Jerry Lee's avatar
      ext4: fix overflow caused by missing cast in ext4_resize_fs() · 31cd127c
      Jerry Lee authored 
      commit aec51758 upstream.

On a 32-bit platform, the value of n_blcoks_count may be wrong during
the file system is resized to size larger than 2^32 blocks.  This may
caused the superblock being corrupted with zero blocks count.

Fixes: 1c6bd717Signed-off-by: default avatarJerry Lee <jerrylee@qnap.com>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      31cd127c
    • Jan Kara's avatar
      ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize · bad9f614
      Jan Kara authored 
      commit fcf5ea10 upstream.

ext4_find_unwritten_pgoff() does not properly handle a situation when
starting index is in the middle of a page and blocksize < pagesize. The
following command shows the bug on filesystem with 1k blocksize:

  xfs_io -f -c "falloc 0 4k" \
            -c "pwrite 1k 1k" \
            -c "pwrite 3k 1k" \
            -c "seek -a -r 0" foo

In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048,
SEEK_DATA) will return the correct result.

Fix the problem by neglecting buffers in a page before starting offset.
Reported-by: default avatarAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bad9f614
    • Josh Poimboeuf's avatar
      mm/page_alloc: Remove kernel address exposure in free_reserved_area() · 12f60018
      Josh Poimboeuf authored 
      commit adb1fe9a upstream.

Linus suggested we try to remove some of the low-hanging fruit related
to kernel address exposure in dmesg.  The only leaks I see on my local
system are:

  Freeing SMP alternatives memory: 32K (ffffffff9e309000 - ffffffff9e311000)
  Freeing initrd memory: 10588K (ffffa0b736b42000 - ffffa0b737599000)
  Freeing unused kernel memory: 3592K (ffffffff9df87000 - ffffffff9e309000)
  Freeing unused kernel memory: 1352K (ffffa0b7288ae000 - ffffa0b728a00000)
  Freeing unused kernel memory: 632K (ffffa0b728d62000 - ffffa0b728e00000)

Linus says:

  "I suspect we should just remove [the addresses in the 'Freeing'
   messages]. I'm sure they are useful in theory, but I suspect they
   were more useful back when the whole "free init memory" was
   originally done.

   These days, if we have a use-after-free, I suspect the init-mem
   situation is the easiest situation by far. Compared to all the dynamic
   allocations which are much more likely to show it anyway. So having
   debug output for that case is likely not all that productive."

With this patch the freeing messages now look like this:

  Freeing SMP alternatives memory: 32K
  Freeing initrd memory: 10588K
  Freeing unused kernel memory: 3592K
  Freeing unused kernel memory: 1352K
  Freeing unused kernel memory: 632K
Suggested-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/6836ff90c45b71d38e5d4405aec56fa9e5d1d4b2.1477405374.git.jpoimboe@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@google.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      12f60018
    • Wanpeng Li's avatar
      KVM: async_pf: make rcu irq exit if not triggered from idle task · bbccdb1e
      Wanpeng Li authored 
      commit 337c017c upstream.

 WARNING: CPU: 5 PID: 1242 at kernel/rcu/tree_plugin.h:323 rcu_note_context_switch+0x207/0x6b0
 CPU: 5 PID: 1242 Comm: unity-settings- Not tainted 4.13.0-rc2+ #1
 RIP: 0010:rcu_note_context_switch+0x207/0x6b0
 Call Trace:
  __schedule+0xda/0xba0
  ? kvm_async_pf_task_wait+0x1b2/0x270
  schedule+0x40/0x90
  kvm_async_pf_task_wait+0x1cc/0x270
  ? prepare_to_swait+0x22/0x70
  do_async_page_fault+0x77/0xb0
  ? do_async_page_fault+0x77/0xb0
  async_page_fault+0x28/0x30
 RIP: 0010:__d_lookup_rcu+0x90/0x1e0

I encounter this when trying to stress the async page fault in L1 guest w/
L2 guests running.

Commit 9b132fbe (Add rcu user eqs exception hooks for async page
fault) adds rcu_irq_enter/exit() to kvm_async_pf_task_wait() to exit cpu
idle eqs when needed, to protect the code that needs use rcu.  However,
we need to call the pair even if the function calls schedule(), as seen
from the above backtrace.

This patch fixes it by informing the RCU subsystem exit/enter the irq
towards/away from idle for both n.halted and !n.halted.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bbccdb1e
    • Banajit Goswami's avatar
      ASoC: do not close shared backend dailink · 7de8d0c0
      Banajit Goswami authored 
      commit b1cd2e34 upstream.

Multiple frontend dailinks may be connected to a backend
dailink at the same time. When one of frontend dailinks is
closed, the associated backend dailink should not be closed
if it is connected to other active frontend dailinks. Change
ensures that backend dailink is closed only after all
connected frontend dailinks are closed.
Signed-off-by: default avatarGopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: default avatarBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: default avatarPatrick Lai <plai@codeaurora.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7de8d0c0
    • Sergei A. Trusov's avatar
      ALSA: hda - Fix speaker output from VAIO VPCL14M1R · 458c8be4
      Sergei A. Trusov authored 
      commit 3f3c3714 upstream.

Sony VAIO VPCL14M1R needs the quirk to make the speaker working properly.
Tested-by: default avatarDmitriy <mexx400@yandex.ru>
Signed-off-by: default avatarSergei A. Trusov <sergei.a.trusov@ya.ru>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      458c8be4
    • Tejun Heo's avatar
      workqueue: restore WQ_UNBOUND/max_active==1 to be ordered · c59eec4d
      Tejun Heo authored 
      commit 5c0338c6 upstream.

The combination of WQ_UNBOUND and max_active == 1 used to imply
ordered execution.  After NUMA affinity 4c16bd32 ("workqueue:
implement NUMA affinity for unbound workqueues"), this is no longer
true due to per-node worker pools.

While the right way to create an ordered workqueue is
alloc_ordered_workqueue(), the documentation has been misleading for a
long time and people do use WQ_UNBOUND and max_active == 1 for ordered
workqueues which can lead to subtle bugs which are very difficult to
trigger.

It's unlikely that we'd see noticeable performance impact by enforcing
ordering on WQ_UNBOUND / max_active == 1 workqueues.  Let's
automatically set __WQ_ORDERED for those workqueues.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reported-by: default avatarChristoph Hellwig <hch@infradead.org>
Reported-by: default avatarAlexei Potashnik <alexei@purestorage.com>
Fixes: 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues")
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c59eec4d
    • Dan Carpenter's avatar
      libata: array underflow in ata_find_dev() · 8ecd8cff
      Dan Carpenter authored 
      commit 59a5e266 upstream.

My static checker complains that "devno" can be negative, meaning that
we read before the start of the loop.  I've looked at the code, and I
think the warning is right.  This come from /proc so it's root only or
it would be quite a quite a serious bug.  The call tree looks like this:

proc_scsi_write() <- gets id and channel from simple_strtoul()
-> scsi_add_single_device() <- calls shost->transportt->user_scan()
   -> ata_scsi_user_scan()
      -> ata_find_dev()
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8ecd8cff
  3. 07 Aug, 2017 25 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7