- 10 Nov, 2020 9 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’: drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’: drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable] Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org
-
Lee Jones authored
The API has been updated, but the header was not. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank' Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit' Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob@ti.com> Cc: Andy Gross <andy.gross@ti.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create' drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create' drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset' Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Maxime Ripard authored
Many drivers reference the crtc->pointer in order to get the current CRTC state in their atomic_begin or atomic_flush hooks, which would be the new CRTC state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_crtc_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct tegra_dc_state *crtc_state = e; + struct tegra_dc_state *dc_state = e; <+... - crtc_state + dc_state ...+> } @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct mtk_crtc_state *crtc_state = e; + struct mtk_crtc_state *mtk_crtc_state = e; <+... - crtc_state + mtk_crtc_state ...+> } @ replaces_new_state @ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct drm_crtc_state *crtc_state = crtc->state; + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ adds_new_state @ identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ include depends on adds_new_state || replaces_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_new_state || replaces_new_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Suggested-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105164518.392891-1-maxime@cerno.tech
-
Thomas Zimmermann authored
Fixes a build failure with mediatek. This change was supposed to be part of commit 49a3f51d ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but mediatek was forgotten. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 49a3f51d ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Eric Anholt <eric@anholt.net> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arunpravin <apaneers@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Madhav Chauhan <madhav.chauhan@amd.com> Cc: Nirmoy Das <Nirmoy.Das@amd.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Fixes a build failure with msm. This change was supposed to be part of commit 49a3f51d ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but msm was forgotten. Signed-off-by:
-
Geert Uytterhoeven authored
On arm32: drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_read_screen_base’: include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast ... drivers/gpu/drm/drm_fb_helper.c:2041:22: note: in expansion of macro ‘min’ 2041 | size_t alloc_size = min(count, PAGE_SIZE); | ^~~ drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_write_screen_base’: include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast ... drivers/gpu/drm/drm_fb_helper.c:2115:22: note: in expansion of macro ‘min’ 2115 | size_t alloc_size = min(count, PAGE_SIZE); | ^~~ Indeed, on 32-bit size_t is "unsigned int", not "unsigned long". Fixes: 222ec45f ("drm/fb_helper: Support framebuffers in I/O memory") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
KuoHsiang Chou authored
[New] Support AST2600 Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
- 09 Nov, 2020 17 commits
-
-
Thomas Zimmermann authored
Apparently, the function was never used at all. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106124224.21201-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
As GEM object functions are now mandatory, DRM drivers based on CMA helpers either set them in their implementation of gem_create_object, or use the default via drm_gem_cma_create_object_default_funcs(). Simplify this by setting the default CMA object functions for all objects that don't have any functions of their own. Follows the pattern of similar code in SHMEM and VRAM helpers. The function drm_gem_cma_create_object_default_funcs() is redundant and therefore being removed. Signed-off-by:
-
Thomas Zimmermann authored
At least sparc64 requires I/O-specific access to framebuffers. This patch updates the fbdev console accordingly. For drivers with direct access to the framebuffer memory, the callback functions in struct fb_ops test for the type of memory and call the rsp fb_sys_ of fb_cfb_ functions. Read and write operations are implemented internally by DRM's fbdev helper. For drivers that employ a shadow buffer, fbdev's blit function retrieves the framebuffer address as struct dma_buf_map, and uses dma_buf_map interfaces to access the buffer. The bochs driver on sparc64 uses a workaround to flag the framebuffer as I/O memory and avoid a HW exception. With the introduction of struct dma_buf_map, this is not required any longer. The patch removes the rsp code from both, bochs and fbdev. v7: * use min_t(size_t,) (kernel test robot) * return the number of bytes read/written, if any (fbdev testcase) v5: * implement fb_read/fb_write internally (Daniel, Sam) v4: * move dma_buf_map changes into separate patch (Daniel) * TODO list: comment on fbdev updates (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
To do framebuffer updates, one needs memcpy from system memory and a pointer-increment function. Add both interfaces with documentation. v5: * include <linux/string.h> to build on sparc64 (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Kernel DRM clients now store their framebuffer address in an instance of struct dma_buf_map. Depending on the buffer's location, the address refers to system or I/O memory. Callers of drm_client_buffer_vmap() receive a copy of the value in the call's supplied arguments. It can be accessed and modified with dma_buf_map interfaces. v6: * don't call page_to_phys() on framebuffers in I/O memory; warn instead (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
GEM's vmap and vunmap interfaces now wrap memory pointers in struct dma_buf_map. Signed-off-by:
-
Thomas Zimmermann authored
This patch replaces the vmap/vunmap's use of raw pointers in GEM object functions with instances of struct dma_buf_map. GEM backends are converted as well. For most of them, this simply changes the returned type. TTM-based drivers now return information about the location of the memory, either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap() et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of implementing their own vmap callbacks. v7: * init QXL cursor to mapped BO buffer (kernel test robot) v5: * update vkms after switch to shmem v4: * use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian) * fix a trailing { in drm_gem_vmap() * remove several empty functions instead of converting them (Daniel) * comment uses of raw pointers with a TODO (Daniel) * TODO list: convert more helpers to use struct dma_buf_map Signed-off-by:Christian König <christian.koenig@amd.com> Tested-by:
-
Thomas Zimmermann authored
The new functions ttm_bo_{vmap,vunmap}() map and unmap a TTM BO in kernel address space. The mapping's address is returned as struct dma_buf_map. Each function is a simplified version of TTM's existing kmap code. Both functions respect the memory's location ani/or writecombine flags. On top TTM's functions, GEM TTM helpers got drm_gem_ttm_{vmap,vunmap}(), two helpers that convert a GEM object into the TTM BO and forward the call to TTM's vmap/vunmap. These helpers can be dropped into the rsp GEM object callbacks. v5: * use size_t for storing mapping size (Christian) * ignore premapped memory areas correctly in ttm_bo_vunmap() * rebase onto latest TTM interfaces (Christian) * remove BUG() from ttm_bo_vmap() (Christian) v4: * drop ttm_kmap_obj_to_dma_buf() in favor of vmap helpers (Daniel, Christian) Signed-off-by: -
Thomas Zimmermann authored
The functions exynos_drm_gem_prime_{vmap,vunmap}() are empty. Remove them before changing the interface to use struct drm_buf_map. As a side effect of removing drm_gem_prime_vmap(), the error code changes from ENOMEM to EOPNOTSUPP. Signed-off-by: -
Thomas Zimmermann authored
The function etnaviv_gem_prime_vunmap() is empty. Remove it before changing the interface to use struct drm_buf_map. Signed-off-by:
-
Thomas Zimmermann authored
The function drm_gem_cma_prime_vunmap() is empty. Remove it before changing the interface to use struct drm_buf_map. Signed-off-by:
-
Thomas Zimmermann authored
The parameters map and is_iomem are always of the same value. Removed them to prepares the function for conversion to struct dma_buf_map. v4: * don't check for !kmap->virtual; will always be false Signed-off-by:
-
Thomas Zimmermann authored
Drop the driver's udev field in favor of struct drm_device.dev. No functional changes made. v3: * upcast dev with udl_to_usb_device() v2: * upcast dev with drm_dev_get_usb_device() Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Thomas Zimmermann authored
Drop the driver's udev field in favor of struct drm_device.dev. No functional changes made. v3: * upcast dev with gm12u320_to_usb_device() v2: * upcast dev with drm_dev_get_usb_device() Signed-off-by:
-
KuoHsiang Chou authored
[Bug] Change the vertical synchroous polary of 1920x1080 @60Hz from Negtive to Positive Signed-off-by: -
Alex Shi authored
Couple of variables are actually useless, remove them to save some gcc warning: drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable ‘color_key_enable’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Stephen Boyd authored
Reading the EDID of this panel shows that these flags should be set. Set them so that we match what is in the EDID. Cc: Douglas Anderson <dianders@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: b0c664cc ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 08 Nov, 2020 7 commits
-
-
Tom Rix authored
A break is not needed if it is preceded by a return or break Signed-off-by:
Tom Rix <trix@redhat.com> Acked-by:
-
Biju Das authored
dev_err_probe function simplifies error handling. So use the same in probe function wherever possible. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Biju Das authored
Fix the warning message "missing connector type" by adding connector_type for EDT ETM0700G0DH6 panel. Signed-off-by:
-
Alexandru Gagniuc authored
On the SII9022, the IOVCC and CVCC12 supplies must reach the correct voltage before the reset sequence is initiated. On most boards, this assumption is true at boot-up, so initialization succeeds. However, when we try to initialize the chip with incorrect supply voltages, it will not respond to I2C requests. sii902x_probe() fails with -ENXIO. To resolve this, look for the "iovcc" and "cvcc12" regulators, and make sure they are enabled before starting the reset sequence. If these supplies are not available in devicetree, then they will default to dummy-regulator. In that case everything will work like before. This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode. On this board, the supplies would be set by the second stage bootloader, which does not run in falcon mode. Signed-off-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
-
Alexandru Gagniuc authored
The sii902x chip family requires IO and core voltages to reach the correct voltage before chip initialization. Add binding for describing the two supplies. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexandru Gagniuc authored
Separate the hardware initialization code from setting up the data structures and parsing the device tree. The purpose of this change is to provide a single exit point and avoid a waterfall of 'goto's in the subsequent patch. Signed-off-by:
-
Qinglang Miao authored
Add the missing platform_driver_unregister() before return from panel_simple_init in the error handling case when failed to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI enabled. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
- 07 Nov, 2020 7 commits
-
-
Michael Tretter authored
In commit 05193dc3 ("drm/bridge: Make the bridge chain a double-linked list") the bridge has been removed and replaced by a private field. Remove the leftover documentation of the removed field. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Reviewed-by:
-
Stephen Boyd authored
We should be setting the drm_dp_aux_msg::reply field if a NACK or a SHORT reply happens. Update the error bit handling logic in ti_sn_aux_transfer() to handle these cases and notify upper layers that such errors have happened. This helps the retry logic understand that a timeout has happened, or to shorten the read length if the panel isn't able to handle the longest read possible. Note: I don't have any hardware that exhibits these code paths so this is written based on reading the datasheet for this bridge and inspecting the code and how this is called. Changes in v2: - Move WRITE_STATUS_UPDATE check from case to assignment Changes in v2: - Handle WRITE_STATUS_UPDATE properly Reviewed-by:
-
Stephen Boyd authored
Use the DDC connection to read the EDID from the eDP panel instead of relying on the panel to tell us the modes. Reviewed-by:
-
Stephen Boyd authored
There's no reason we need to wait here to poll a register over i2c. The i2c bus is inherently slow and delays are practically part of the protocol because we have to wait for the device to respond to any request for a register. Let's rely on the sleeping of the i2c controller instead of adding any sort of delay here in the bridge driver. Reviewed-by:
-
Stephen Boyd authored
These register reads and writes are sometimes directly next to each other in the register address space. Let's use regmap bulk read/write APIs to get the data with one transfer instead of multiple i2c transfers. This helps cut down on the number of transfers in the case of something like reading an EDID where we read in blocks of 16 bytes at a time and the last for loop here is sending an i2c transfer for each of those 16 bytes, one at a time. Ouch! Changes in v3: - Undid changes in v2 Changes in v2: - Combined AUX_CMD register write Reviewed-by:
-
Dmitry Baryshkov authored
Add support for Lontium LT9611UXC HDMI bridge. Lontium LT9611UXC is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output. Despite name being similar to LT9611, these devices are different enough to warrant separate driver. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports and I2S port as input and one HDMI port as output. The LT9611UXC chip is handled by a separate driver, but the bindings used are fully compatible with the LT9611 chip, so let's reuse the lt9611.yaml schema. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
