Pull ARM SoC DT updates from Arnd Bergmann:
 "This is a rather large update for the ARM devicetree files, after a
  few quieter releases, with 775 total commits and 47 branches pulled
  into this one.

  There are 5 new SoC types plus some minor variations, and a total of
  60 new machines, so I'm limiting the summary to the main noteworthy
  items:

   - Apple M1 gain support for PCI and pinctrl, getting a bit closer to
     a usable system out of the box.

   - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
     SM7225, 11 new smartphones, and three additional Chromebooks, and
     improvements all over the place.

   - Samsung gains support for ExynosAutov9, an automotive version of
     their smartphone SoC, but otherwise no major changes.

   - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
     of improvements for the recently added SAMA7 family. The LAN966 SoC
     that was added in the platform code does not have dts files yet.
     Two board files are added for the older at91sam9g20 SoC

   - Aspeed supports two additional server boards using their AST2600 as
     BMC, and improves support for qemu models

   - Rockchip RK3566/RK3688 gets added, along with six new development
     boards using RK3328/RK3399/RK3566, and one Chromebook tablet.

   - Two NAS boxes are added using the ARMv4 based Gemini platform

   - One new board is added to the Intel Arria SoC FPGA family

   - Marvell adds one network switch based on Armada 381 and the new
     MOCHAbin 7040 development board

   - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
     readers, and three additional development boards, which is notably
     less than their usual additions, but they also gain improvements to
     their many existing boards

   - STmicroelectronics adds their stm32mp13 SoC family along with a
     reference board

   - Renesas adds new versions of their R-Car Gen3 SoCs and many updates
     for their older generations

   - Broadcom adds support for a number of Cisco Meraki wireless
     controllers, along with two new boards and other updates for
     BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards

   - Mediatek improves support for the MT81xx SoCs used in Chromebooks
     as well as the MT76xx networking SoCs

   - NVIDIA adds a number of cleanups and additional support for more
     hardware on the already supported machines

   - TI K3 adds support for three new boards along with cleanups

   - Toshiba adds one board for the Visconti family

   - Xilinx adds five new ZynqMP based machines

   - Amlogic support is added for the Radxa Zero and two Jethub home
     automation controllers, along with changes to other machines

   - Rob Herring continues his work on fixing dtc warnings all over the
     tree.

   - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
     Ux500, Unisoc"

* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
  arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
  arm64: dts: apple: t8103: Add root port interrupt routing
  arm64: dts: apple: t8103: Add PCIe DARTs
  arm64: apple: Add PCIe node
  arm64: apple: Add pinctrl nodes
  ARM: dts: arm: Update ICST clock nodes 'reg' and node names
  ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
  arm64: dts: exynos: add chipid node for exynosautov9 SoC
  ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
  Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
  arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
  arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
  arm64: dts: qcom: sm8350: Add CPU topology and idle-states
  arm64: dts: qcom: Drop unneeded extra device-specific includes
  arm64: dts: qcom: msm8916: Drop standalone smem node
  arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
  arm64: dts: qcom: msm8916-asus-z00l: Add sensors
  arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
  arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
  arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "The SoC updates this time are mainly removing obsolete code from the
  OMAP2 platform, another step in the eternal cleanup of that platform.

  There are two new SoCs getting added: STMicroelectronics stm32mp13 and
  Microchip lan966. Both fit into existing platforms and require minimal
  changes here.

  A couple of MAINTAINER file updates relate to those changes, and
  update some file paths"

* tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  MAINTAINERS: Update BCM7XXX entry with additional patterns
  MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE
  MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE
  ARM: SPEAr: Update MAINTAINERS entries
  ARM: OMAP2+: Drop unused CM defines for am3
  ARM: OMAP2+: Drop unused CM and SCRM defines for omap4
  ARM: OMAP2+: Drop unused CM and SCRM defines for omap5
  ARM: OMAP2+: Drop unused CM defines for dra7
  ARM: OMAP2+: Drop unused PRM defines for am3
  ARM: OMAP2+: Drop unused PRM defines for am4
  ARM: OMAP2+: Drop unused PRM defines for omap4
  ARM: OMAP2+: Drop unused PRM defines for omap5
  ARM: OMAP2+: Drop unused PRM defines for dra7
  ARM: OMAP2+: Fix comment typo
  ARM: OMAP2+: Fix typo in some comments
  ARM: at91: add basic support for new SoC family lan966
  dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards
  ARM: at91: Documentation: add lan966 family
  ARM: at91: Documentation: add sama7g5 family
  MAINTAINERS: add an entry for NXP S32G boards
  ...

Pull virtio updates from Michael Tsirkin:
 "vhost and virtio fixes and features:

   - Hardening work by Jason

   - vdpa driver for Alibaba ENI

   - Performance tweaks for virtio blk

   - virtio rng rework using an internal buffer

   - mac/mtu programming for mlx5 vdpa

   - Misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
  vdpa/mlx5: Forward only packets with allowed MAC address
  vdpa/mlx5: Support configuration of MAC
  vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
  vdpa_sim_net: Enable user to set mac address and mtu
  vdpa: Enable user to set mac and mtu of vdpa device
  vdpa: Use kernel coding style for structure comments
  vdpa: Introduce query of device config layout
  vdpa: Introduce and use vdpa device get, set config helpers
  virtio-scsi: don't let virtio core to validate used buffer length
  virtio-blk: don't let virtio core to validate used length
  virtio-net: don't let virtio core to validate used length
  virtio_ring: validate used buffer length
  virtio_blk: correct types for status handling
  virtio_blk: allow 0 as num_request_queues
  i2c: virtio: Add support for zero-length requests
  virtio-blk: fixup coccinelle warnings
  virtio_ring: fix typos in vring_desc_extra
  virtio-pci: harden INTX interrupts
  virtio_pci: harden MSI-X interrupts
  virtio_config: introduce a new .enable_cbs method
  ...

Pull VFIO updates from Alex Williamson:

 - Cleanup vfio iommu_group creation (Christoph Hellwig)

 - Add individual device reset for vfio/fsl-mc (Diana Craciun)

 - IGD OpRegion 2.0+ support (Colin Xu)

 - Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)

 - Use new mdev API in vfio_ccw (Jason Gunthorpe)

* tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits)
  vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()
  vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions
  vfio/ccw: Use functions for alloc/free of the vfio_ccw_private
  vfio/ccw: Remove unneeded GFP_DMA
  vfio: Use cdev_device_add() instead of device_create()
  vfio: Use a refcount_t instead of a kref in the vfio_group
  vfio: Don't leak a group reference if the group already exists
  vfio: Do not open code the group list search in vfio_create_group()
  vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier()
  vfio/pci: Add OpRegion 2.0+ Extended VBT support.
  vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER
  vfio/iommu_type1: remove the "external" domain
  vfio/iommu_type1: initialize pgsize_bitmap in ->open
  vfio/spapr_tce: reject mediated devices
  vfio: clean up the check for mediated device in vfio_iommu_type1
  vfio: remove the unused mdev iommu hook
  vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h>
  vfio: remove unused method from vfio_iommu_driver_ops
  vfio: simplify iommu group allocation for mediated devices
  vfio: remove the iommudata hack for noiommu groups
  ...

Merge branch 'per_signal_struct_coredumps-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull per signal_struct coredumps from Eric Biederman:
 "Current coredumps are mixed up with the exit code, the signal handling
  code, and the ptrace code making coredumps much more complicated than
  necessary and difficult to follow.

  This series of changes starts with ptrace_stop and cleans it up,
  making it easier to follow what is happening in ptrace_stop. Then
  cleans up the exec interactions with coredumps. Then cleans up the
  coredump interactions with exit. Finally the coredump interactions
  with the signal handling code is cleaned up.

  The first and last changes are bug fixes for minor bugs.

  I believe the fact that vfork followed by execve can kill the process
  the called vfork if exec fails is sufficient justification to change
  the userspace visible behavior.

  In previous discussions some of these changes were organized
  differently and individually appeared to make the code base worse. As
  currently written I believe they all stand on their own as cleanups
  and bug fixes.

  Which means that even if the worst should happen and the last change
  needs to be reverted for some unimaginable reason, the code base will
  still be improved.

  If the worst does not happen there are a more cleanups that can be
  made. Signals that generate coredumps can easily become eligible for
  short circuit delivery in complete_signal. The entire rendezvous for
  generating a coredump can move into get_signal. The function
  force_sig_info_to_task be written in a way that does not modify the
  signal handling state of the target task (because coredumps are
  eligible for short circuit delivery). Many of these future cleanups
  can be done another way but nothing so cleanly as if coredumps become
  per signal_struct"

* 'per_signal_struct_coredumps-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  coredump: Limit coredumps to a single thread group
  coredump:  Don't perform any cleanups before dumping core
  exit: Factor coredump_exit_mm out of exit_mm
  exec: Check for a pending fatal signal instead of core_state
  ptrace: Remove the unnecessary arguments from arch_ptrace_stop
  signal: Remove the bogus sigkill_pending in ptrace_stop

When building m68k:allmodconfig, recent versions of gcc generate the
following error if the length of UTS_RELEASE is less than 8 bytes.

  In function 'memcpy_and_pad',
    inlined from 'nvmet_execute_disc_identify' at
      drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 8 bytes from a region of size 7

Discussions around the problem suggest that this only happens if an
architecture does not provide strlen(), if -ffreestanding is provided as
compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case
for m68k. The exact reasons are unknown, but seem to be related to the
ability of the compiler to evaluate the return value of strlen() and
the resulting execution flow in memcpy_and_pad(). It would be possible
to work around the problem by using sizeof(UTS_RELEASE) instead of
strlen(UTS_RELEASE), but that would only postpone the problem until the
function is called in a similar way. Uninline memcpy_and_pad() instead
to solve the problem for good.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull jfs fix from David Kleikamp:
 "Just one JFS patch"

* tag 'jfs-5.16' of git://github.com/kleikamp/linux-shaggy:
  JFS: fix memleak in jfs_mount

Pull more tracing updates from Steven Rostedt:

 - osnoise and timerlat updates that will work with the RTLA tool
   (Real-Time Linux Analysis).

   Specifically it disconnects the work load (threads that look for
   latency) from the tracing instances attached to them, allowing for
   more than one instance to retrieve data from the work load.

 - Optimization on division in the trace histogram trigger code to use
   shift and multiply when possible. Also added documentation.

 - Fix prototype to my_direct_func in direct ftrace trampoline sample
   code.

* tag 'trace-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/samples: Add missing prototype for my_direct_func
  tracing/selftests: Add tests for hist trigger expression parsing
  tracing/histogram: Document hist trigger variables
  tracing/histogram: Update division by 0 documentation
  tracing/histogram: Optimize division by constants
  tracing/osnoise: Remove PREEMPT_RT ifdefs from inside functions
  tracing/osnoise: Remove STACKTRACE ifdefs from inside functions
  tracing/osnoise: Allow multiple instances of the same tracer
  tracing/osnoise: Remove TIMERLAT ifdefs from inside functions
  tracing/osnoise: Support a list of trace_array *tr
  tracing/osnoise: Use start/stop_per_cpu_kthreads() on osnoise_cpus_write()
  tracing/osnoise: Split workload start from the tracer start
  tracing/osnoise: Improve comments about barrier need for NMI callbacks
  tracing/osnoise: Do not follow tracing_cpumask

Broadcom STB systems use the bcm7038 pattern as well as the bcm7120
pattern for some of its drivers, add those to the existing entry.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211028163756.4014059-1-f.fainelli@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull rdma updates from Jason Gunthorpe:
 "A typical collection of patches this cycle, mostly fixing with a few
  new features:

   - Fixes from static tools. clang warnings, dead code, unused
     variable, coccinelle sweeps, etc

   - Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1,
     mlx5, irdma, qedr

   - rtrs ULP bug fixes an improvments

   - Additional counters for bnxt_re

   - Support verbs CQ notifications in EFA

   - Continued reworking and fixing of rxe

   - netlink control to enable/disable optional device counters

   - rxe now can use AH objects for its UD path, fixing various bugs in
     the process

   - Add DMABUF support to EFA"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits)
  RDMA/core: Require the driver to set the IOVA correctly during rereg_mr
  RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback
  RDMA/irdma: optimize rx path by removing unnecessary copy
  RDMA/qed: Use helper function to set GUIDs
  RDMA/hns: Use the core code to manage the fixed mmap entries
  IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks
  IB/qib: Rebranding of qib driver to Cornelis Networks
  IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks
  RDMA/bnxt_re: Use helper function to set GUIDs
  RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs
  RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
  RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
  RDMA/hns: Fix initial arm_st of CQ
  RDMA/rxe: Make rxe_type_info static const
  RDMA/rxe: Use 'bitmap_zalloc()' when applicable
  RDMA/rxe: Save a few bytes from struct rxe_pool
  RDMA/irdma: Remove the unused variable local_qp
  RDMA/core: Fix missed initialization of rdma_hw_stats::lock
  RDMA/efa: Add support for dmabuf memory regions
  RDMA/umem: Allow pinned dmabuf umem usage
  ...

Pull sound updates from Takashi Iwai:
 "Lots of code development have been see in ASoC side as usual, while
  the continued development on memalloc helper and USB-audio low-
  latency support are found in the rest.

  Note that a few changes in the unusual places like arch/sh are
  included, which are a part of ASoC DAI format cleanups.

  ALSA core:

   - Continued memalloc helper updates and cleanups, now supporting
     non-coherent and non-contiguous pages

   - Fixes for races in mixer OSS layer

  ASoC:

   - A new version of the audio graph card which supports a wider range
     of systems

   - Several conversions to YAML DT bindings

   - Continuing cleanups to the SOF and Intel code

   - Move of the Cirrus DSP framework into drivers/firmware to allow for
     future use by non-audio DSPs

   - An overhaul of the cs42l42 driver, correcting many problems

   - DAI format terminology conversions over many drivers for cleanups

   - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
     MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
     Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
     RT5682S, and RT9120 and Rockchip RV1126 and RK3568

  USB-audio:

   - Continued improvements on low-latency playback

   - Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14

  HD-audio:

   - Reduce excessive udelay() calls on Intel platforms; this should
     reduce the CPU load with PulseAudio

   - Quirks for HP and Clevo laptops

  FireWire:

   - Support for meter information on MOTU"

* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
  ALSA: usb-audio: Add quirk for Audient iD14
  ALSA: hda/realtek: Add quirk for Clevo PC70HS
  ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
  ALSA: usb-audio: Add registration quirk for JBL Quantum 400
  ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
  ASoC: tlv320aic3x: Make aic3x_remove() return void
  ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
  ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
  ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
  ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
  ASoC: Intel: sof_rt5682: detect codec variant in probe function
  ASoC: soc-acpi: add comp_ids field for machine driver matching
  ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
  ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
  ASoC: Stop dummy from overriding hwparams
  ASoC: topology: Change topology device to card device
  ASoC: topology: Use correct device for prints
  ASoC: topology: Check for dapm widget completeness
  ASoC: topology: Add header payload_size verification
  ASoC: core: Remove invalid snd_soc_component_set_jack call
  ...

If the driver returns a new MR during rereg it has to fill it with the
IOVA from the proper source. If IB_MR_REREG_TRANS is set then the IOVA is
cmd.hca_va, otherwise the IOVA comes from the old MR. mlx5 for example has
two calls inside rereg_mr:

		return create_real_mr(new_pd, umem, mr->ibmr.iova,
				      new_access_flags);
and
		return create_real_mr(new_pd, new_umem, iova, new_access_flags);

Unconditionally overwriting the iova in the newly allocated MR will
corrupt the iova if the first path is used.

Remove the redundant initializations from ib_uverbs_rereg_mr().

Fixes: 6e0954b1 ("RDMA/uverbs: Allow drivers to create a new HW object during rereg_mr")
Link: https://lore.kernel.org/r/4b0a31bbc372842613286a10d7a8cbb0ee6069c7.1635400472.git.leonro@nvidia.comSigned-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

There is no need to return always zero for function which is not
supported, especially since 0 is the wrong return code.

Link: https://lore.kernel.org/r/20211102073054.410838-1-kamalheib1@gmail.comSigned-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull devicetree updates from Rob Herring:

 - Convert /reserved-memory bindings to schemas

 - Convert a bunch of NFC bindings to schemas

 - Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
   CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
   and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
   Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
   ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
   boards, and TI sysc

 - New binding schemas for: msi-ranges, Aspeed UART routing controller,
   palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
   memory controller, and Apple M1 PCIe host

 - Run schema checks for %.dtb targets

 - Improve build time when using DT_SCHEMA_FILES

 - Improve error message when dtschema is not found

 - Various doc reference fixes in MAINTAINERS

 - Convert architectures to common CPU h/w ID parsing function
   of_get_cpu_hwid().

 - Allow for empty NUMA node IDs which may be hotplugged

 - Cleanup of __fdt_scan_reserved_mem()

 - Constify device_node parameters

 - Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
   'node_name_vs_property_name' and 'interrupt_map'.

 - Enable dtc 'unit_address_format' warning by default

 - Fix unittest EXPECT text for gpio hog errors

* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
  dt-bindings: net: ti,bluetooth: Document default max-speed
  dt-bindings: pci: rcar-pci-ep: Document r8a7795
  dt-bindings: net: qcom,ipa: IPA does support up to two iommus
  of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
  of: unittest: document intentional interrupt-map provider build warning
  of: unittest: fix EXPECT text for gpio hog errors
  of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
  scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
  dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
  dt-bindings: display: tilcd: Fix endpoint addressing in example
  dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
  dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
  dt-bindings: ufs: exynos-ufs: add io-coherency property
  dt-bindings: mips: convert Ralink SoCs and boards to schema
  dt-bindings: display: xilinx: Fix example with psgtr
  dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
  dt-bindings: Add a help message when dtschema tools are missing
  dt-bindings: bus: ti-sysc: Update to use yaml binding
  dt-bindings: sram: Allow numbers in sram region node name
  dt-bindings: display: Document the Xylon LogiCVC display controller
  ...

Pull documentation updates from Jonathan Corbet:
 "This is a relatively unexciting cycle for documentation.

   - Some small scripts/kerneldoc fixes

   - More Chinese translation work, but at a much reduced rate.

   - The tip-tree maintainer's handbook

  ...plus the usual array of build fixes, typo fixes, etc"

* tag 'docs-5.16' of git://git.lwn.net/linux: (53 commits)
  kernel-doc: support DECLARE_PHY_INTERFACE_MASK()
  docs/zh_CN: add core-api xarray translation
  docs/zh_CN: add core-api assoc_array translation
  speakup: Fix typo in documentation "boo" -> "boot"
  docs: submitting-patches: make section about the Link: tag more explicit
  docs: deprecated.rst: Clarify open-coded arithmetic with literals
  scripts: documentation-file-ref-check: fix bpf selftests path
  scripts: documentation-file-ref-check: ignore hidden files
  coding-style.rst: trivial: fix location of driver model macros
  docs: f2fs: fix text alignment
  docs/zh_CN add PCI pci.rst translation
  docs/zh_CN add PCI index.rst translation
  docs: translations: zh_CN: memory-hotplug.rst: fix a typo
  docs: translations: zn_CN: irq-affinity.rst: add a missing extension
  block: add documentation for inflight
  scripts: kernel-doc: Ignore __alloc_size() attribute
  docs: pdfdocs: Adjust \headheight for fancyhdr
  docs: UML: user_mode_linux_howto_v2 edits
  docs: use the lore redirector everywhere
  docs: proc.rst: mountinfo: align columns
  ...

Merge tag 'linux-kselftest-kunit-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several enhancements and fixes:

   - ability to run each test suite and test separately

   - support for timing test run

   - several fixes and improvements"

* tag 'linux-kselftest-kunit-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: fix typecheck errors about loading qemu configs
  kunit: tool: continue past invalid utf-8 output
  kunit: Reset suite count after running tests
  kunit: tool: improve compatibility of kunit_parser with KTAP specification
  kunit: tool: yield output from run_kernel in real time
  kunit: tool: support running each suite/test separately
  kunit: tool: actually track how long it took to run tests
  kunit: tool: factor exec + parse steps into a function
  kunit: add 'kunit.action' param to allow listing out tests
  kunit: tool: show list of valid --arch options when invalid
  kunit: tool: misc fixes (unused vars, imports, leaked files)
  kunit: fix too small allocation when using suite-only kunit.filter_glob
  kunit: tool: allow filtering test cases via glob
  kunit: drop assumption in kunit-log-test about current suite

Merge tag 'linux-kselftest-next-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "Fixes to compile time errors and warnings"

* tag 'linux-kselftest-next-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/core: fix conflicting types compile error for close_range()
  selftests: x86: fix [-Wstringop-overread] warn in test_process_vm_readv()
  selftests: kvm: fix mismatched fclose() after popen()

Merge tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - AMD-PMC S0ix support fixes and improvements

   - HP-WMI support for Omen laptops

   - New nvidia-wmi-ec-backlight driver

   - New Intel ISH ECLITE driver

   - WMI core cleanups

   - Support for various new Melanox platforms

   - System76 Laptop support improvements

   - Surface Laptop Studio support and initial Surface Pro 8 support

   - Various other small fixes and hardware-id additions"

* tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
  platform/x86: system76_acpi: Fix input device error handling
  platform/x86: touchscreen_dmi: Add info for the Viglen Connect 10 tablet
  platform/surface: aggregator_registry: Add initial support for Surface Pro 8
  platform/x86: mlx-platform: Add support for new system SGN2410
  platform/x86: mlx-platform: Add BIOS attributes for CoffeeLake COMEx based systems
  platform/x86: mlx-platform: Extend FAN and LED configuration to support new MQM97xx systems
  platform/x86: asus-wmi: rename platform_profile_* function symbols
  platform/x86: hp-wmi: rename platform_profile_* function symbols
  platform/x86: amd-pmc: Drop check for valid alarm time
  platform/x86: amd-pmc: Downgrade dev_info message to dev_dbg
  platform/x86: amd-pmc: fix compilation without CONFIG_RTC_SYSTOHC_DEVICE
  platform/x86: system76_acpi: fix Kconfig dependencies
  platform/x86: barco-p50-gpio: use KEY_VENDOR for button instead of KEY_RESTART
  platform/x86: sony-laptop: replace snprintf in show functions with sysfs_emit
  platform/x86: lg-laptop: replace snprintf in show functions with sysfs_emit
  docs: ABI: fix documentation warning in sysfs-driver-mlxreg-io
  platform/x86: wmi: change notification handler type
  HID: surface-hid: Allow driver matching for target ID 1 devices
  HID: surface-hid: Use correct event registry for managing HID events
  platform/surface: aggregator_registry: Add support for Surface Laptop Studio
  ...

Pull drm updates from Dave Airlie:
 "Summary below. i915 starts to add support for DG2 GPUs, enables DG1
  and ADL-S support by default, lots of work to enable DisplayPort 2.0
  across drivers. Lots of documentation updates and fixes across the
  board.

  core:
   - improve dma_fence, lease and resv documentation
   - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
   - sched fixes/improvements
   - allow empty drm leases
   - add dma resv iterator
   - add more DP 2.0 headers
   - DP MST helper improvements for DP2.0

  dma-buf:
   - avoid warnings, remove fence trace macros

  bridge:
   - new helper to get rid of panels
   - probe improvements for it66121
   - enable DSI EOTP for anx7625

  fbdev:
   - efifb: release runtime PM on destroy

  ttm:
   - kerneldoc switch
   - helper to clear all DMA mappings
   - pool shrinker optimizaton
   - remove ttm_tt_destroy_common
   - update ttm_move_memcpy for async use

  panel:
   - add new panel-edp driver

  amdgpu:
   - Initial DP 2.0 support
   - Initial USB4 DP tunnelling support
   - Aldebaran MCE support
   - Modifier support for DCC image stores for GFX 10.3
   - Display rework for better FP code handling
   - Yellow Carp/Cyan Skillfish updates
   - Cyan Skillfish display support
   - convert vega/navi to IP discovery asic enumeration
   - validate IP discovery table
   - RAS improvements
   - Lots of fixes

  i915:
   - DG1 PCI IDs + LMEM discovery/placement
   - DG1 GuC submission by default
   - ADL-S PCI IDs updated + enabled by default
   - ADL-P (XE_LPD) fixed and updates
   - DG2 display fixes
   - PXP protected object support for Gen12 integrated
   - expose multi-LRC submission interface for GuC
   - export logical engine instance to user
   - Disable engine bonding on Gen12+
   - PSR cleanup
   - PSR2 selective fetch by default
   - DP 2.0 prep work
   - VESA vendor block + MSO use of it
   - FBC refactor
   - try again to fix fast-narrow vs slow-wide eDP training
   - use THP when IOMMU enabled
   - LMEM backup/restore for suspend/resume
   - locking simplification
   - GuC major reworking
   - async flip VT-D workaround changes
   - DP link training improvements
   - misc display refactorings

  bochs:
   - new PCI ID

  rcar-du:
   - Non-contiguious buffer import support for rcar-du
   - r8a779a0 support prep

  omapdrm:
   - COMPILE_TEST fixes

  sti:
   - COMPILE_TEST fixes

  msm:
   - fence ordering improvements
   - eDP support in DP sub-driver
   - dpu irq handling cleanup
   - CRC support for making igt happy
   - NO_CONNECTOR bridge support
   - dsi: 14nm phy support for msm8953
   - mdp5: msm8x53, sdm450, sdm632 support

  stm:
   - layer alpha + zpo support

  v3d:
   - fix Vulkan CTS failure
   - support multiple sync objects

  gud:
   - add R8/RGB332/RGB888 pixel formats

  vc4:
   - convert to new bridge helpers

  vgem:
   - use shmem helpers

  virtio:
   - support mapping exported vram

  zte:
   - remove obsolete driver

  rockchip:
   - use bridge attach no connector for LVDS/RGB"

* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
  drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
  drm/amd/display: MST support for DPIA
  drm/amdgpu: Fix even more out of bound writes from debugfs
  drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
  drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
  drm/amdgpu/UAPI: rearrange header to better align related items
  drm/amd/display: Enable dpia in dmub only for DCN31 B0
  drm/amd/display: Fix USB4 hot plug crash issue
  drm/amd/display: Fix deadlock when falling back to v2 from v3
  drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
  drm/amd/display: move FPU associated DCN301 code to DML folder
  drm/amd/display: fix link training regression for 1 or 2 lane
  drm/amd/display: add two lane settings training options
  drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
  drm/amd/display: implement decide lane settings
  drm/amd/display: adopt DP2.0 LT SCR revision 8
  drm/amd/display: FEC configuration for dpia links in MST mode
  drm/amd/display: FEC configuration for dpia links
  drm/amd/display: Add workaround flag for EDID read on certain docks
  drm/amd/display: Set phy_mux_sel bit in dmub scratch register
  ...

Pull PNP update from Rafael Wysocki:
 "Fix a comment incorrectly marked as kernel-doc (Randy Dunlap)"

* tag 'pnp-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: system.c: unmark a comment as being kernel-doc

Pull thermal control updates from Rafael Wysocki:
 "These extend the thermal trip point crossing notifications sent via
  netlink to contain the temperature causing the trip point to be
  crossed, deprecate the user space thermal governor, add new DT
  bindings to drivers, move ABI documentation to Documentation/ABI, fix
  assorted issues and clean up code.

  Specifics:

   - Constify a variable in thermal MMIO driver (Rikard Falkeborn).

   - Add the current temperature in the netlink message when crossing a
     trip point in order to prevent useless back and forth reading from
     userspace (Daniel Lezcano).

   - Add support for the 'HC' variant on PM8998 PMIC in order to support
     VADC channels on recent QCom boards (Bjorn Andersson).

   - Add support for calibration values from hardware when they are
     fused (Niklas Söderlund).

   - Fix NULL pointer dereference in the thermal_release callback when
     an error occurs in the thermal_zone_device_register() (Yuanzheng
     Song).

   - Fix use-after-free in __thermal_cooling_device_register() in the
     error path (Ziyang Xuan).

   - Fix compilation of the LMh driver when CONFIG_QCOM_SCM is not set
     (Jackie Liu).

   - Add timeout when reading a register that can block forever in
     certain circumstances in the tsens driver (Ansuel Smith).

   - Add DT binding for the reset lines and use them in the rockchip
     sensor driver (Johan Jonker).

   - Add new uniphier NX1 SoC temperature sensor (Kunihiko Hayashi).

   - Save and restore the TCC value in the int340x driver (Antoine
     Tenart).

   - Deprecate the writability of the cooling device state sysfs file
     and the user space governor (Daniel Lezcano).

   - Delete bogus length check in int340x (Dan Carpenter).

   - Use bitmap_zalloc/bitmap_free when applicable in intel_powerclamp
     (Christophe JAILLET).

   - Move thermal ABI documentation to Documentation/ABI (Mauro Carvalho
     Chehab)"

* tag 'thermal-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (21 commits)
  thermal/core: Deprecate changing cooling device state from userspace
  thermal/core: Make the userspace governor deprecated
  thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume
  thermal/drivers/uniphier: Add compatible string for NX1 SoC
  dt-bindings: thermal: uniphier: Add binding for NX1 SoC
  thermal/drivers/rockchip_thermal: Allow more resets for tsadc node
  dt-bindings: thermal: remove redundant comments from rockchip-thermal.yaml
  dt-bindings: thermal: allow more resets for tsadc node in rockchip-thermal.yaml
  thermal/drivers/tsens: Add timeout to get_temp_tsens_valid
  thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM
  thermal/core: fix a UAF bug in __thermal_cooling_device_register()
  thermal/core: Fix null pointer dereference in thermal_release()
  thermal: rcar_gen3_thermal: Read calibration from hardware
  thermal: rcar_gen3_thermal: Store thcode and ptat in priv data
  thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
  dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings
  thermal: Move ABI documentation to Documentation/ABI
  thermal/drivers/netlink: Add the temperature when crossing a trip point
  thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops
  thermal: int340x: delete bogus length check
  ...

Pull power management updates from Rafael Wysocki:
 "These make the power management of PCI devices with ACPI companions
  more straightforwad, add support for inefficient operating performance
  points to the Energy model and make cpufreq handle them as
  appropriate, rearrange the handling of cpuidle during system PM
  transitions, update a few cpufreq drivers and intel_idle, fix assorded
  issues and clean up code in multiple places.

  Specifics:

   - Add support for inefficient operating performance points to the
     Energy Model and modify cpufreq to use them properly (Vincent
     Donnefort).

   - Rearrange the DTPM framework code to simplify it and make it easier
     to follow (Daniel Lezcano).

   - Fix power intialization in DTPM (Daniel Lezcano).

   - Add CPU load consideration when estimating the instaneous power
     consumption in DTPM (Daniel Lezcano).

   - Fix cpu->pstate.turbo_freq initialization in intel_pstate (Zhang
     Rui).

   - Make intel_pstate process HWP Guaranteed change notifications from
     the processor (Srinivas Pandruvada).

   - Fix typo in cpufreq.h (Rafael Wysocki).

   - Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).

   - Fix the parameter usage of the newly added perf-domain API (Hector
     Yuan).

   - Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
     Guenter Roeck, and Arnd Bergmann).

   - Fix kobject memory leaks in cpuidle error paths (Anel
     Orazgaliyeva).

   - Make intel_idle enable interrupts before entering C1 on some Xeon
     processor models (Artem Bityutskiy).

   - Clean up hib_wait_io() (Falla Coulibaly).

   - Fix sparse warnings in hibernation-related code (Anders Roxell).

   - Use vzalloc() and kzalloc() instead of their open-coded equivalents
     in hibernation-related code (Cai Huoqing).

   - Prevent user space from crashing the kernel by attempting to
     restore the system state from a swap partition in use (Ye Bin).

   - Do not let "syscore" devices runtime-suspend during system PM
     transitions (Rafael Wysocki).

   - Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki).

   - Pause cpuidle later and resume it earlier during system PM
     transitions (Rafael Wysocki).

   - Make system suspend code use valid_state() consistently (Rafael
     Wysocki).

   - Add support for enabling wakeup IRQs after invoking the
     ->runtime_suspend() callback and make two drivers use it (Chunfeng
     Yun).

   - Make the association of ACPI device objects with PCI devices more
     straightforward and simplify the code doing that for all devices in
     general (Rafael Wysocki).

   - Eliminate struct pci_platform_pm_ops and handle the both of its
     users (PCI and Intel MID) directly in the PCI bus code (Rafael
     Wysocki).

   - Simplify and clarify ACPI PCI device PM helpers (Rafael Wysocki).

   - Fix ordering of operations in pci_back_from_sleep() (Rafael
     Wysocki).

   - Make exynos-ppmu use hyphens in DT properties (Krzysztof
     Kozlowski).

   - Simplify parsing event-type from DT in exynos-ppmu (Krzysztof
     Kozlowski).

   - Strengthen check for freq_table in devfreq (Samuel Holland)"

* tag 'pm-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (49 commits)
  cpufreq: Fix parameter in parse_perf_domain()
  usb: mtu3: enable wake-up interrupt after runtime_suspend called
  usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called
  PM / wakeirq: support enabling wake-up irq after runtime_suspend called
  PM / devfreq: Strengthen check for freq_table
  devfreq: exynos-ppmu: simplify parsing event-type from DT
  devfreq: exynos-ppmu: use node names with hyphens
  cpufreq: intel_pstate: Fix cpu->pstate.turbo_freq initialization
  PM: suspend: Use valid_state() consistently
  PM: sleep: Pause cpuidle later and resume it earlier during system transitions
  PM: suspend: Do not pause cpuidle in the suspend-to-idle path
  PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions
  PM: hibernate: Get block device exclusively in swsusp_check()
  powercap/drivers/dtpm: Fix power limit initialization
  powercap/drivers/dtpm: Scale the power with the load
  powercap/drivers/dtpm: Use container_of instead of a private data field
  powercap/drivers/dtpm: Simplify the dtpm table
  powercap/drivers/dtpm: Encapsulate even more the code
  PM: hibernate: swap: Use vzalloc() and kzalloc()
  PM: hibernate: fix sparse warnings
  ...

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision, address some issues related to the ACPI power resources
  management, simplify the enumeration of PCI devices having ACPI
  companions, add new quirks, fix assorted problems, update the
  ACPI-related information in maintainers and clean up code in several
  places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20210930
     including the following changes:

        - Fix system-wide resume issue caused by evaluating control
          methods too early in the resume path (Rafael Wysocki).

        - Add support for Windows 2020 _OSI string (Mario Limonciello).

        - Add Generic Port Affinity type for SRAT (Alison Schofield).

        - Add disassembly support for the NHLT ACPI table (Bob Moore).

   - Avoid flushing caches before entering C3 type of idle states on AMD
     processors (Deepak Sharma).

   - Avoid enumerating CPUs that are not present and not online-capable
     according to the platform firmware (Mario Limonciello).

   - Add DMI-based mechanism to quirk IRQ overrides and use it for two
     platforms (Hui Wang).

   - Change the configuration of unused ACPI device objects to reflect
     the D3cold power state after enumerating devices (Rafael Wysocki).

   - Update MAINTAINERS information regarding ACPI (Rafael Wysocki).

   - Fix typo in ACPI Kconfig (Masanari Iid).

   - Use sysfs_emit() instead of snprintf() in some places (Qing Wang).

   - Make the association of ACPI device objects with PCI devices more
     straightforward and simplify the code doing that for all devices in
     general (Rafael Wysocki).

   - Use acpi_device_adr() in acpi_find_child_device() instead of
     evaluating _ADR (Rafael Wysocki).

   - Drop duplicate device IDs from PNP device IDs list (Krzysztof
     Kozlowski).

   - Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
     Gong).

   - Use ACPI_COMPANION() to simplify code in some drivers (Rafael
     Wysocki).

   - Check the states of all ACPI power resources during initialization
     to avoid dealing with power resources in unknown states (Rafael
     Wysocki).

   - Fix ACPI power resource issues related to sharing wakeup power
     resources (Rafael Wysocki).

   - Avoid registering redundant suspend_ops (Rafael Wysocki).

   - Report battery charging state as "full" if it appears to be over
     the design capacity (André Almeida).

   - Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
     Schaeckeler).

   - Mark apei_hest_parse() static (Christoph Hellwig).

   - Relax platform response timeout to 1 second after instructing it to
     inject an error (Shuai Xue).

   - Make the PRM code handle memory allocation and remapping failures
     more gracefully and drop some unnecessary blank lines from that
     code (Aubrey Li).

   - Fix spelling mistake in the ACPI documentation (Colin Ian King)"

* tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (36 commits)
  ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()
  perf: qcom_l2_pmu: ACPI: Use ACPI_COMPANION() directly
  ACPI: APEI: mark apei_hest_parse() static
  ACPI: APEI: EINJ: Relax platform response timeout to 1 second
  gpio-amdpt: ACPI: Use the ACPI_COMPANION() macro directly
  nouveau: ACPI: Use the ACPI_COMPANION() macro directly
  ACPI: resources: Add one more Medion model in IRQ override quirk
  ACPI: AC: Quirk GK45 to skip reading _PSR
  ACPI: PM: sleep: Do not set suspend_ops unnecessarily
  ACPI: PRM: Handle memory allocation and memory remap failure
  ACPI: PRM: Remove unnecessary blank lines
  ACPI: PM: Turn off wakeup power resources on _DSW/_PSW errors
  ACPI: PM: Fix sharing of wakeup power resources
  ACPI: PM: Turn off unused wakeup power resources
  ACPI: PM: Check states of power resources during initialization
  ACPI: replace snprintf() in "show" functions with sysfs_emit()
  ACPI: LPSS: Use ACPI_COMPANION() directly
  ACPI: scan: Release PM resources blocked by unused objects
  ACPI: battery: Accept charges over the design capacity as full
  ACPICA: Update version to 20210930
  ...

Merge branch 'ucount-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucount cleanups from Eric Biederman:
 "While working on the ucount fixes a for v5.15 a number of cleanups
  suggested themselves.

  Little things like not testing for NULL when a pointer can not be NULL
  and wrapping atomic_add_negative with a more descriptive name, so that
  people reading the code can more quickly understand what is going on"

* 'ucount-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Use atomic_long_sub_return for clarity
  ucounts: Add get_ucounts_or_wrap for clarity
  ucounts: Remove unnecessary test for NULL ucount in get_ucounts
  ucounts: In set_cred_ucounts assume new->ucounts is non-NULL

Pull cgroup updates from Tejun Heo:

 - The misc controller now reports allocation rejections through
   misc.events instead of printking

 - cgroup_mutex usage is reduced to improve scalability of some
   operations

 - vhost helper threads are now assigned to the right cgroup on cgroup2

 - Bug fixes

* 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: bpf: Move wrapper for __cgroup_bpf_*() to kernel/bpf/cgroup.c
  cgroup: Fix rootcg cpu.stat guest double counting
  cgroup: no need for cgroup_mutex for /proc/cgroups
  cgroup: remove cgroup_mutex from cgroupstats_build
  cgroup: reduce dependency on cgroup_mutex
  cgroup: cgroup-v1: do not exclude cgrp_dfl_root
  cgroup: Make rebind_subsystems() disable v2 controllers all at once
  docs/cgroup: add entry for misc.events
  misc_cgroup: remove error log to avoid log flood
  misc_cgroup: introduce misc.events to count failures

Pull workqueue updates from Tejun Heo:
 "Nothing too interesting. An optimization to short-circuit noop cpumask
  updates, debug dump code reorg, and doc update"

* 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: doc: Call out the non-reentrance conditions
  workqueue: Introduce show_one_worker_pool and show_one_workqueue.
  workqueue: make sysfs of unbound kworker cpumask more clever

Pull xfs updates from Darrick Wong:
 "This cycle we've worked on fixing bugs and improving XFS' memory
  footprint.

  The most notable fixes include: fixing a corruption warning (and free
  space accounting skew) if copy on write fails; fixing slab cache
  misuse if SLOB is enabled, which apparently was broken for years
  without anybody noticing; and fixing a potential race with online
  shrinkfs.

  Otherwise, the bulk of the changes here involve setting up separate
  slab caches for frequently used items such as btree cursors and log
  intent items, and compacting the structures to reduce memory usage of
  those items substantially. This also sets us up to support larger
  btrees in future kernels. We also switch parts of online fsck to
  allocate scrub context information from the heap instead of using
  stack space.

  Summary:

   - Bug fixes and cleanups for kernel memory allocation usage, this
     time without touching the mm code.

   - Refactor the log recovery mechanism that preserves held resources
     across a transaction roll so that it uses the exact same mechanism
     that we use for that during regular runtime.

   - Fix bugs and tighten checking around btree heights.

   - Remove more old typedefs.

   - Fix perag reference leaks when racing with growfs.

   - Remove unused fields from xfs_btree_cur.

   - Allocate various scrub structures on the heap to reduce stack
     usage.

   - Pack xfs_btree_cur fields and rearrange to support arbitrary
     heights.

   - Compute maximum possible heights for each btree height, and use
     that to set up slab caches for each btree type.

   - Finally remove kmem_zone_t, since these have always been struct
     kmem_cache on Linux.

   - Compact the structures used to coordinate work intent items.

   - Set up slab caches for each work intent item type.

   - Rename the "bmap_add_free" function to "free_extent_later", which
     more accurately describes what it does.

   - Fix corruption warning on unmount when a CoW preallocation covers a
     data fork delalloc reservation but then the CoW fails.

   - Add some more minor code improvements"

* tag 'xfs-5.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (45 commits)
  xfs: use swap() to make code cleaner
  xfs: Remove duplicated include in xfs_super
  xfs: punch out data fork delalloc blocks on COW writeback failure
  xfs: remove unused parameter from refcount code
  xfs: reduce the size of struct xfs_extent_free_item
  xfs: rename xfs_bmap_add_free to xfs_free_extent_later
  xfs: create slab caches for frequently-used deferred items
  xfs: compact deferred intent item structures
  xfs: rename _zone variables to _cache
  xfs: remove kmem_zone typedef
  xfs: use separate btree cursor cache for each btree type
  xfs: compute absolute maximum nlevels for each btree type
  xfs: kill XFS_BTREE_MAXLEVELS
  xfs: compute the maximum height of the rmap btree when reflink enabled
  xfs: clean up xfs_btree_{calc_size,compute_maxlevels}
  xfs: compute maximum AG btree height for critical reservation calculation
  xfs: rename m_ag_maxlevels to m_allocbt_maxlevels
  xfs: dynamically allocate cursors based on maxlevels
  xfs: encode the max btree height in the cursor
  xfs: refactor btree cursor allocation function
  ...

Pull AFS updates from David Howells:

 - Split the readpage handler for symlinks from the one for files. The
   symlink readpage isn't given a file pointer, so the handling has to
   be special-cased.

   This has been posted as part of a patchset to foliate netfs, afs,
   etc.[1] but I've moved it to this one as it's not actually doing
   foliation but is more of a pre-cleanup.

 - Fix file creation to set the mtime from the client's clock to keep
   make happy if the server's clock isn't quite in sync.[2]

Link: https://lore.kernel.org/r/163005742570.2472992.7800423440314043178.stgit@warthog.procyon.org.uk/ [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-October/004395.html [2]

* tag 'afs-next-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Set mtime from the client for yfs create operations
  afs: Sort out symlink reading

Pull gfs2 updates from Andreas Gruenbacher:

 - Fix a locking order inversion between the inode and iopen glocks in
   gfs2_inode_lookup.

 - Implement proper queuing of glock holders for glocks that require
   instantiation (like reading an inode or bitmap blocks from disk).
   Before, multiple glock holders could race with each other and
   half-initialized objects could be exposed; the GL_SKIP flag further
   exacerbated this problem.

 - Fix a rare deadlock between inode lookup / creation and remote delete
   work.

 - Fix a rare scheduling-while-atomic bug in dlm during glock hash table
   walks.

 - Various other minor fixes and cleanups.

* tag 'gfs2-v5.15-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (21 commits)
  gfs2: Fix unused value warning in do_gfs2_set_flags()
  gfs2: check context in gfs2_glock_put
  gfs2: Fix glock_hash_walk bugs
  gfs2: Cancel remote delete work asynchronously
  gfs2: set glock object after nq
  gfs2: remove RDF_UPTODATE flag
  gfs2: Eliminate GIF_INVALID flag
  gfs2: fix GL_SKIP node_scope problems
  gfs2: split glock instantiation off from do_promote
  gfs2: further simplify do_promote
  gfs2: re-factor function do_promote
  gfs2: Remove 'first' trace_gfs2_promote argument
  gfs2: change go_lock to go_instantiate
  gfs2: dump glocks from gfs2_consist_OBJ_i
  gfs2: dequeue iopen holder in gfs2_inode_lookup error
  gfs2: Save ip from gfs2_glock_nq_init
  gfs2: Allow append and immutable bits to coexist
  gfs2: Switch some BUG_ON to GLOCK_BUG_ON for debug
  gfs2: move GL_SKIP check from glops to do_promote
  gfs2: Add GL_SKIP holder flag to dump_holder
  ...

Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
 "Functions gfs2_file_read_iter and gfs2_file_write_iter are both
  accessing the user buffer to write to or read from while holding the
  inode glock.

  In the most basic deadlock scenario, that buffer will not be resident
  and it will be mapped to the same file. Accessing the buffer will
  trigger a page fault, and gfs2 will deadlock trying to take the same
  inode glock again while trying to handle that fault.

  Fix that and similar, more complex scenarios by disabling page faults
  while accessing user buffers. To make this work, introduce a small
  amount of new infrastructure and fix some bugs that didn't trigger so
  far, with page faults enabled"

* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix mmap + page fault deadlocks for direct I/O
  iov_iter: Introduce nofault flag to disable page faults
  gup: Introduce FOLL_NOFAULT flag to disable page faults
  iomap: Add done_before argument to iomap_dio_rw
  iomap: Support partial direct I/O on user copy failures
  iomap: Fix iomap_dio_rw return value for user copies
  gfs2: Fix mmap + page fault deadlocks for buffered I/O
  gfs2: Eliminate ip->i_gh
  gfs2: Move the inode glock locking to gfs2_file_buffered_write
  gfs2: Introduce flag for glock holder auto-demotion
  gfs2: Clean up function may_grant
  gfs2: Add wrapper for iomap_file_buffered_write
  iov_iter: Introduce fault_in_iov_iter_writeable
  iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
  gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
  powerpc/kvm: Fix kvm_use_magic_page
  iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value

Pull ARM updates from Russell King:

 - Rejig task/thread info to place thread info in task struct

 - Amba bus cleanups (removing unused functions)

 - Handle Amba device probe without IRQ domains

 - Parse linux,usable-memory-range in decompressor

 - Mark OCRAM as read-only after initialisation

 - Refactor page fault handling

 - Fix PXN handling with LPAE kernels

 - Warning and build fixes from Arnd

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on Clang
  ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=y
  ARM: 9147/1: add printf format attribute to early_print()
  ARM: 9146/1: RiscPC needs older gcc version
  ARM: 9145/1: patch: fix BE32 compilation
  ARM: 9144/1: forbid ftrace with clang and thumb2_kernel
  ARM: 9143/1: add CONFIG_PHYS_OFFSET default values
  ARM: 9142/1: kasan: work around LPAE build warning
  ARM: 9140/1: allow compile-testing without machine record
  ARM: 9137/1: disallow CONFIG_THUMB with ARMv4
  ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
  ARM: 9135/1: kprobes: address gcc -Wempty-body warning
  ARM: 9101/1: sa1100/assabet: convert LEDs to gpiod APIs
  ARM: 9131/1: mm: Fix PXN process with LPAE feature
  ARM: 9130/1: mm: Provide die_kernel_fault() helper
  ARM: 9126/1: mm: Kill page table base print in show_pte()
  ARM: 9127/1: mm: Cleanup access_error()
  ARM: 9129/1: mm: Kill task_struct argument for __do_page_fault()
  ARM: 9128/1: mm: Refactor the __do_page_fault()
  ARM: imx6: mark OCRAM mapping read-only
  ...

Merge Energy Model and power capping updates for 5.16-rc1:

 - Add support for inefficient operating performance points to the
   Energy Model and modify cpufreq to use them properly (Vincent
   Donnefort).

 - Rearrange the DTPM framework code to simplify it and make it easier
   to follow (Daniel Lezcano).

 - Fix power intialization in DTPM (Daniel Lezcano).

 - Add CPU load consideration when estimating the instaneous power
   consumption in DTPM (Daniel Lezcano).

* pm-em:
  cpufreq: mediatek-hw: Fix cpufreq_table_find_index_dl() call
  PM: EM: Mark inefficiencies in CPUFreq
  cpufreq: Use CPUFREQ_RELATION_E in DVFS governors
  cpufreq: Introducing CPUFREQ_RELATION_E
  cpufreq: Add an interface to mark inefficient frequencies
  cpufreq: Make policy min/max hard requirements
  PM: EM: Allow skipping inefficient states
  PM: EM: Extend em_perf_domain with a flag field
  PM: EM: Mark inefficient states
  PM: EM: Fix inefficient states detection

* powercap:
  powercap/drivers/dtpm: Fix power limit initialization
  powercap/drivers/dtpm: Scale the power with the load
  powercap/drivers/dtpm: Use container_of instead of a private data field
  powercap/drivers/dtpm: Simplify the dtpm table
  powercap/drivers/dtpm: Encapsulate even more the code

Pull KVM updates from Paolo Bonzini:
 "ARM:

   - More progress on the protected VM front, now with the full fixed
     feature set as well as the limitation of some hypercalls after
     initialisation.

   - Cleanup of the RAZ/WI sysreg handling, which was pointlessly
     complicated

   - Fixes for the vgic placement in the IPA space, together with a
     bunch of selftests

   - More memcg accounting of the memory allocated on behalf of a guest

   - Timer and vgic selftests

   - Workarounds for the Apple M1 broken vgic implementation

   - KConfig cleanups

   - New kvmarm.mode=none option, for those who really dislike us

  RISC-V:

   - New KVM port.

  x86:

   - New API to control TSC offset from userspace

   - TSC scaling for nested hypervisors on SVM

   - Switch masterclock protection from raw_spin_lock to seqcount

   - Clean up function prototypes in the page fault code and avoid
     repeated memslot lookups

   - Convey the exit reason to userspace on emulation failure

   - Configure time between NX page recovery iterations

   - Expose Predictive Store Forwarding Disable CPUID leaf

   - Allocate page tracking data structures lazily (if the i915 KVM-GT
     functionality is not compiled in)

   - Cleanups, fixes and optimizations for the shadow MMU code

  s390:

   - SIGP Fixes

   - initial preparations for lazy destroy of secure VMs

   - storage key improvements/fixes

   - Log the guest CPNC

  Starting from this release, KVM-PPC patches will come from Michael
  Ellerman's PPC tree"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
  RISC-V: KVM: fix boolreturn.cocci warnings
  RISC-V: KVM: remove unneeded semicolon
  RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
  RISC-V: KVM: Factor-out FP virtualization into separate sources
  KVM: s390: add debug statement for diag 318 CPNC data
  KVM: s390: pv: properly handle page flags for protected guests
  KVM: s390: Fix handle_sske page fault handling
  KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
  KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
  KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
  KVM: x86: Clarify the kvm_run.emulation_failure structure layout
  KVM: s390: Add a routine for setting userspace CPU state
  KVM: s390: Simplify SIGP Set Arch handling
  KVM: s390: pv: avoid stalls when making pages secure
  KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
  KVM: s390: pv: avoid double free of sida page
  KVM: s390: pv: add macros for UVC CC values
  s390/mm: optimize reset_guest_reference_bit()
  s390/mm: optimize set_guest_storage_key()
  s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
  ...

Merge cpufreq and cpuidle updates for 5.16-rc1:

 - Fix cpu->pstate.turbo_freq initialization in intel_pstate (Zhang
   Rui).

 - Make intel_pstate process HWP Guaranteed change notifications from
   the processor (Srinivas Pandruvada).

 - Fix typo in cpufreq.h (Rafael Wysocki).

 - Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).

 - Fix the parameter usage of the newly added perf-domain API (Hector
   Yuan).

 - Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
   Guenter Roeck, and Arnd Bergmann).

 - Fix kobject memory leaks in cpuidle error paths (Anel Orazgaliyeva).

 - Make intel_idle enable interrupts before entering C1 on some Xeon
   processor models (Artem Bityutskiy).

* pm-cpufreq:
  cpufreq: Fix parameter in parse_perf_domain()
  cpufreq: intel_pstate: Fix cpu->pstate.turbo_freq initialization
  cpufreq: Fix typo in cpufreq.h
  cpufreq: intel_pstate: Process HWP Guaranteed change notification
  cpufreq: tegra186/tegra194: Handle errors in BPMP response
  cpufreq: remove useless INIT_LIST_HEAD()
  cpufreq: s3c244x: add fallthrough comments for switch
  cpufreq: vexpress: Drop unused variable

* pm-cpuidle:
  cpuidle: Fix kobject memory leaks in error paths
  intel_idle: enable interrupts before C1 on Xeons

Merge updates related to system sleep for 5.16-rc1:

 - Clean up hib_wait_io() (Falla Coulibaly).

 - Fix sparse warnings in hibernation-related code (Anders Roxell).

 - Use vzalloc() and kzalloc() instead of their open-coded
   equivalents in hibernation-related code (Cai Huoqing).

 - Prevent user space from crashing the kernel by attempting to
   restore the system state from a swap partition in use (Ye Bin).

 - Do not let "syscore" devices runtime-suspend during system PM
   transitions (Rafael Wysocki).

 - Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki).

 - Pause cpuidle later and resume it earlier during system PM
   transitions (Rafael Wysocki).

 - Make system suspend code use valid_state() consistently (Rafael
   Wysocki).

 - Add support for enabling wakeup IRQs after invoking the
   ->runtime_suspend() callback and make two drivers use it (Chunfeng
   Yun).

* pm-sleep:
  usb: mtu3: enable wake-up interrupt after runtime_suspend called
  usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called
  PM / wakeirq: support enabling wake-up irq after runtime_suspend called
  PM: suspend: Use valid_state() consistently
  PM: sleep: Pause cpuidle later and resume it earlier during system transitions
  PM: suspend: Do not pause cpuidle in the suspend-to-idle path
  PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions
  PM: hibernate: Get block device exclusively in swsusp_check()
  PM: hibernate: swap: Use vzalloc() and kzalloc()
  PM: hibernate: fix sparse warnings
  Revert "PM: sleep: Do not assume that "mem" is always present"
  PM: hibernate: Remove blk_status_to_errno in hib_wait_io
  PM: sleep: Do not assume that "mem" is always present

Merge PCI device power management updates for 5.16-rc1:

 - Make the association of ACPI device objects with PCI devices more
   straightforward and simplify the code doing that for all devices
   in general (Rafael Wysocki).

 - Eliminate struct pci_platform_pm_ops and handle the both of its
   users (PCI and Intel MID) directly in the PCI bus code (Rafael
   Wysocki).

 - Simplify and clarify ACPI PCI device PM helpers (Rafael Wysocki).

 - Fix ordering of operations in pci_back_from_sleep() (Rafael
   Wysocki).

* pm-pci:
  PCI: PM: Fix ordering of operations in pci_back_from_sleep()
  PCI: PM: Do not call platform_pci_power_manageable() unnecessarily
  PCI: PM: Make pci_choose_state() call pci_target_state()
  PCI: PM: Rearrange pci_target_state()
  PCI: PM: Simplify acpi_pci_power_manageable()
  PCI: PM: Drop struct pci_platform_pm_ops
  PCI: ACPI: PM: Do not use pci_platform_pm_ops for ACPI
  PCI: PM: Do not use pci_platform_pm_ops for Intel MID PM
  ACPI: glue: Look for ACPI bus type only if ACPI companion is not known
  ACPI: glue: Drop cleanup callback from struct acpi_bus_type
  PCI: ACPI: Drop acpi_pci_bus

Merge APEI, PRM and documentation udpates for 5.16-rc1:

 - Mark apei_hest_parse() static (Christoph Hellwig).

 - Relax platform response timeout to 1 second after instructing it
   to inject an error (Shuai Xue).

 - Make the PRM code handle memory allocation and remapping failures
   more gracefully and drop some unnecessary blank lines from that
   code (Aubrey Li).

 - Fix spelling mistake in the ACPI documentation (Colin Ian King).

* acpi-apei:
  ACPI: APEI: mark apei_hest_parse() static
  ACPI: APEI: EINJ: Relax platform response timeout to 1 second

* acpi-prm:
  ACPI: PRM: Handle memory allocation and memory remap failure
  ACPI: PRM: Remove unnecessary blank lines

* acpi-docs:
  Documentation: ACPI: Fix spelling mistake "Millenium" -> "Millennium"

Merge tag 'hyperv-next-signed-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - Initial patch set for Hyper-V isolation VM support (Tianyu Lan)

 - Fix a warning on preemption (Vitaly Kuznetsov)

 - A bunch of misc cleanup patches

* tag 'hyperv-next-signed-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Protect set_hv_tscchange_cb() against getting preempted
  Drivers: hv : vmbus: Adding NULL pointer check
  x86/hyperv: Remove duplicate include
  x86/hyperv: Remove duplicated include in hv_init
  Drivers: hv: vmbus: Remove unused code to check for subchannels
  Drivers: hv: vmbus: Initialize VMbus ring buffer for Isolation VM
  Drivers: hv: vmbus: Add SNP support for VMbus channel initiate message
  x86/hyperv: Add ghcb hvcall support for SNP VM
  x86/hyperv: Add Write/Read MSR registers via ghcb page
  Drivers: hv: vmbus: Mark vmbus ring buffer visible to host in Isolation VM
  x86/hyperv: Add new hvcall guest address host visibility support
  x86/hyperv: Initialize shared memory boundary in the Isolation VM.
  x86/hyperv: Initialize GHCB page in Isolation VM

Pull printk updates from Petr Mladek:

 - Extend %pGp print format to print hex value of the page flags

 - Use kvmalloc instead of kmalloc to allocate devkmsg buffers

 - Misc cleanup and warning fixes

* tag 'printk-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  vsprintf: Update %pGp documentation about that it prints hex value
  lib/vsprintf.c: Amend static asserts for format specifier flags
  vsprintf: Make %pGp print the hex value
  test_printf: Append strings more efficiently
  test_printf: Remove custom appending of '|'
  test_printf: Remove separate page_flags variable
  test_printf: Make pft array const
  ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
  printk: use gnu_printf format attribute for printk_sprint()
  printk: avoid -Wsometimes-uninitialized warning
  printk: use kvmalloc instead of kmalloc for devkmsg_user

Pull integrity subsystem updates from Mimi Zohar:
 "Other than the new gid IMA policy rule support and the RCU locking
  fix, the couple of remaining changes are minor/trivial (e.g.
  __ro_after_init, replacing strscpy)"

* tag 'integrity-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  evm: mark evm_fixmode as __ro_after_init
  ima: Use strscpy instead of strlcpy
  ima_policy: Remove duplicate 'the' in docs comment
  ima: add gid support
  ima: fix uid code style problems
  ima: fix deadlock when traversing "ima_default_rules".