This reverts commit 2626419a.

It causes regressions for people with IGB cards.  Connection
requests don't complete etc.  The true cause of the issue is
still not known, but we should sort this out in net-next-2.6
not net-2.6
Signed-off-by: David S. Miller <davem@davemloft.net>

For 4965, need to check it is valid qos frame before free, only valid
QoS frame has the tid used to free the packets.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Back in commit 04a0551c
("loopback: Drop obsolete ip_summed setting") we stopped
setting CHECKSUM_UNNECESSARY in the loopback xmit.

This is because such a setting was a lie since it implies that the
checksum field of the packet is properly filled in.

Instead what happens normally is that CHECKSUM_PARTIAL is set and
skb->csum is calculated as needed.

But this was only happening for TCP data packets (via the
skb->ip_summed assignment done in tcp_sendmsg()).  It doesn't
happen for non-data packets like ACKs etc.

Fix this by setting skb->ip_summed in the common non-data packet
constructor.  It already is setting skb->csum to zero.

But this reminds us that we still have things like ip_output.c's
ip_dev_loopback_xmit() which sets skb->ip_summed to the value
CHECKSUM_UNNECESSARY, which Herbert's patch teaches us is not
valid.  So we'll have to address that at some point too.
Signed-off-by: David S. Miller <davem@davemloft.net>

Commits 5051ebd2 and
5051ebd2 ("ipv[46]: udp: optimize unicast RX
path") broke some programs.

	After upgrading a L2TP server to 2.6.33 it started to fail, tunnels going up an
down, after the 10th tunnel came up. My modified rp-l2tp uses a global
unconnected socket bound to (INADDR_ANY, 1701) and one connected socket per
tunnel after parameter negotiation.

	After ten sockets were open and due to mixed parameters to
udp[46]_lib_lookup2() kernel started to drop packets.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix rx_pause management in myri10ge_set_pauseparam().
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current documentation for hardware time stamping does not
correctly specify the available kernel functions since the
implementation was changed later on.
Signed-off-by: Patrick Loschmidt <Patrick.Loschmidt@oeaw.ac.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resource size should be calculated as end - start + 1 because we start
counting at zero.  I changed the code to resource_size() to do the 
calculation.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current X.25 code has some bugs in throughput negotiation:

   1. It does negotiation in all cases, usually there is no need
   2. It incorrectly attempts to negotiate the throughput class in one
      direction only.  There are separate throughput classes for input
      and output and if either is negotiated both mist be negotiates.

This is bug https://bugzilla.kernel.org/show_bug.cgi?id=15681

This bug was first reported by Daniel Ferenci to the linux-x25 mailing
list on 6/8/2004, but is still present.

The current (2.6.34) x.25 code doesn't seem to know that the X.25
throughput facility includes two values, one for the required
throughput outbound, one for inbound.

This causes it to attempt to negotiate throughput 0x0A, which is
throughput 9600 inbound and the illegal value "0" for inbound
throughput.

Because of this some X.25 devices (e.g. Cisco 1600) refuse to connect
to Linux X.25.

The following patch fixes this behaviour.  Unless the user specifies a
required throughput it does not attempt to negotiate.  If the user
does not specify a throughput it accepts the suggestion of the remote
X.25 system.  If the user requests a throughput then it validates both
the input and output throughputs and correctly negotiates them with
the remote end.
Signed-off-by: John Hughes <john@calva.com>
Tested-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Here is a patch to stop X.25 examining fields beyond the end of the packet.

For example, when a simple CALL ACCEPTED was received:

	10 10 0f

x25_parse_facilities was attempting to decode the FACILITIES field, but this
packet contains no facilities field.
Signed-off-by: John Hughes <john@calva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IGMP3 report parsing is looking at the wrong address for
group records.  This patch fixes it.
Reported-by: Banyeer <banyeer@yahoo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic_service_bnx2x() irq handler can be called during chip reset from
MTU change.  Need to check that the cnic's device state is up before
handling the irq.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If interface is down, mac address request are not sent to fw
but it is getting add in driver mac list.
Driver mac list should be in sync with fw i.e addresses communicated
to fw.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported in <https://bugzilla.kernel.org/show_bug.cgi?id=15355>, r6040_
multicast_list currently crashes. This is due a wrong maximum of multicast
entries. This patch fixes the following issues with multicast:

- number of maximum entries if off-by-one (4 instead of 3)

- the writing of the hash table index is not necessary and leads to invalid
values being written into the MCR1 register, so the MAC is simply put in a non
coherent state

- when we exceed the maximum number of mutlticast address, writing the
broadcast address should be done in registers MID_1{L,M,H} instead of
MID_O{L,M,H}, otherwise we would loose the adapter's MAC address
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

vq_memory_access_ok needs to check whether mem == NULL
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

With the enable_radio being uninitialized, ath_radio_enable() might be
called twice, which can leave some hardware in an undefined state.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The new RCU lockdep support warns about these
in some contexts -- make it aware of the locks
used to protect all this. Different locks are
used in different contexts which unfortunately
means we can't get perfect checking.

Also remove rcu_dereference() from two places
that don't actually dereference the pointers.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This fixes the problem introduced in commit
84040805 which broke mesh peer link establishment.

changes:
v2 	Added missing break (Johannes)
v3 	Broke original patch into two (Johannes)
Signed-off-by: Javier Cardona <javier@cozybit.com>
Cc: stable@kernel.org
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

smc91c92_cs:
 *cvt_ascii_address returns 0, if success.
 *call free_netdev, if we can't find hardware address.
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

We used to free all the Tx queues memory when interface is brought
down and reallocate them again in interface up. This requires
order-4 allocation for txq->cmd[]. In situations like s2ram, this
usually leads to allocation failure in the memory subsystem. The
patch fixed this problem by allocating the Tx queues memory only at
the first time. Later iwl_down/iwl_up only initialize but don't
free and reallocate them. The memory is freed at the device removal
time. BTW, we have already done this for the Rx queue.

This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15551Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

When collecting tx data for non-aggregation packets in rate scaling, if
the tx data matches "other table", it still uses current table to update
the stats and calculate average throughput in function rs_collect_tx_data().
This can mess up the rate scaling data structure and cause a kernel panic
in a BUG_ON statement in rs_rate_scale_perform().

To fix this bug, we pass table pointer instead of window pointer (pointed
to by table pointer) to function rs_collect_tx_data() so that the table
being used is consistent.
Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Henry Zhang <hongx.c.zhang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

Below warning is triggered sometimes at module removal time when
CONFIG_DMA_API_DEBUG is enabled. This should be caused by we didn't
unmap pending commands (enqueued, but no complete notification
received) for the Tx command queue.

[ 1583.107469] ------------[ cut here ]------------
[ 1583.107539] WARNING: at lib/dma-debug.c:688
dma_debug_device_change+0x13c/0x180()
[ 1583.107617] Hardware name: ...
[ 1583.107664] pci 0000:04:00.0: DMA-API: device driver has pending DMA
allocations while released from device [count=1]
[ 1583.107713] Modules linked in: ...
[ 1583.111661] Pid: 16970, comm: modprobe Tainted: G        W
2.6.34-rc1-wl #33
[ 1583.111727] Call Trace:
[ 1583.111779]  [<c02a281c>] ? dma_debug_device_change+0x13c/0x180
[ 1583.111833]  [<c02a281c>] ? dma_debug_device_change+0x13c/0x180
[ 1583.111908]  [<c0138e11>] warn_slowpath_common+0x71/0xd0
[ 1583.111963]  [<c02a281c>] ? dma_debug_device_change+0x13c/0x180
[ 1583.112016]  [<c0138ebb>] warn_slowpath_fmt+0x2b/0x30
[ 1583.112086]  [<c02a281c>] dma_debug_device_change+0x13c/0x180
[ 1583.112142]  [<c03e6c33>] notifier_call_chain+0x53/0x90
[ 1583.112198]  [<c03e1ebe>] ? down_read+0x6e/0x90
[ 1583.112271]  [<c015b229>] __blocking_notifier_call_chain+0x49/0x70
[ 1583.112326]  [<c015b26f>] blocking_notifier_call_chain+0x1f/0x30
[ 1583.112380]  [<c031931c>] __device_release_driver+0x8c/0xa0
[ 1583.112451]  [<c03193bf>] driver_detach+0x8f/0xa0
[ 1583.112538]  [<c0318382>] bus_remove_driver+0x82/0x100
[ 1583.112595]  [<c0319ad9>] driver_unregister+0x49/0x80
[ 1583.112671]  [<c024feb2>] ? sysfs_remove_file+0x12/0x20
[ 1583.112727]  [<c02aa292>] pci_unregister_driver+0x32/0x80
[ 1583.112791]  [<fc13a3c1>] iwl_exit+0x12/0x19 [iwlagn]
[ 1583.112848]  [<c017940a>] sys_delete_module+0x15a/0x210
[ 1583.112870]  [<c015a5db>] ? up_read+0x1b/0x30
[ 1583.112893]  [<c029600c>] ? trace_hardirqs_off_thunk+0xc/0x10
[ 1583.112924]  [<c0295ffc>] ? trace_hardirqs_on_thunk+0xc/0x10
[ 1583.112947]  [<c03e6a1f>] ? do_page_fault+0x1ff/0x3c0
[ 1583.112978]  [<c03e36f6>] ? restore_all_notrace+0x0/0x18
[ 1583.113002]  [<c016aa70>] ? trace_hardirqs_on_caller+0x20/0x190
[ 1583.113025]  [<c0102d58>] sysenter_do_call+0x12/0x38
[ 1583.113054] ---[ end trace fc23e059cc4c2ced ]---
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

Fix formatting on r8169 printk

Brandon Philips noted that I had a spacing issue in my printk for the
last r8169 patch that made it quite ugly.  Fix that up and add the PFX
macro to it as well so it looks like the other r8169 printks
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent changes to add RCU lock verification to rcu_dereference() calls
caught out a problem with netlbl_unlhsh_hash(), see below.

 ===================================================
 [ INFO: suspicious rcu_dereference_check() usage. ]
 ---------------------------------------------------
 net/netlabel/netlabel_unlabeled.c:246 invoked rcu_dereference_check()
 without protection!

This patch fixes this problem as well as others like it in the NetLabel
code.  Also included in this patch is the identification of future work
to eliminate the RCU read lock in netlbl_domhsh_add(), but in the interest
of getting this patch out quickly that work will happen in another patch
to be finished later.

Thanks to Eric Dumazet and Paul McKenney for their help in understanding
the recent RCU changes.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Reported-by: David Howells <dhowells@redhat.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bond_uninit() is invoked with rtnl_lock held, when it does destroy_workqueue()
which will potentially flush all works in this workqueue, if we hold rtnl_lock
again in the work function, it will deadlock.

So move destroy_workqueue() to destructor where rtnl_lock is not held any more,
suggested by Eric.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

check the length of the socket address passed to connect(2).

Check the length of the socket address passed to connect(2). If the
length is invalid, -EINVAL will be returned.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/bluetooth/l2cap.c | 3 ++-
net/bluetooth/rfcomm/sock.c | 3 ++-
net/bluetooth/sco.c | 3 ++-
net/can/bcm.c | 3 +++
net/ieee802154/af_ieee802154.c | 3 +++
net/ipv4/af_inet.c | 5 +++++
net/netlink/af_netlink.c | 3 +++
7 files changed, 20 insertions(+), 3 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Documentation/networking/stmmac.txt for the
stmmac network driver.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac uses crc32 functions so it needs to select CRC32.

Fixes build error:
drivers/built-in.o: In function `dwmac1000_set_filter':
dwmac1000_core.c:(.text+0x3c380): undefined reference to `crc32_le'
dwmac1000_core.c:(.text+0x3c384): undefined reference to `bitrev32'
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vlan traffic on big endian architecture is broken.
Need to swap the vid before giving packet to stack.
This patch fixes it.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flashing is broken on big endian architectures like ppc.
This patch fixes it.

From: Naresh G <nareshg@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>