- 26 Jun, 2018 31 commits
-
-
Steve French authored
commit b2adf22f upstream. The server detects reconnect by the (non-zero) value in PreviousSessionId of SMB2/SMB3 SessionSetup request, but this behavior regressed due to commit 166cea4d ("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup") CC: Stable <stable@vger.kernel.org> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
commit cfe89091 upstream. Fix a few cases where we were not freeing the xid which led to active requests being non-zero at unmount time. Signed-off-by:
-
Tony Luck authored
commit 985c78d3 upstream. Each of the strings that we want to put into the buf[MAX_FLAG_OPT_SIZE] in flags_read() is two characters long. But the sprintf() adds a trailing newline and will add a terminating NUL byte. So MAX_FLAG_OPT_SIZE needs to be 4. sprintf() calls vsnprintf() and *that* does return: " * The return value is the number of characters which would * be generated for the given input, excluding the trailing * '\0', as per ISO C99." Note the "excluding". Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180427163707.ktaiysvbk3yhk4wm@agluck-deskSigned-off-by:
-
Dennis Wassenberg authored
commit 7eef32c1 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G4 Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Wassenberg authored
commit 2861751f upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 830 G5 Signed-off-by:
-
Bo Chen authored
commit a3aa60d5 upstream. When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is created without setting its operators via 'snd_pcm_set_ops()'. Following operations on the new pcm instance can trigger kernel null pointer dereferences and cause kernel oops. This bug was found with my work on building a gray-box fault-injection tool for linux-kernel-module binaries. A kernel null pointer dereference was confirmed from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in file 'sound/core/pcm_native.c'. This patch fixes the bug by calling 'snd_device_free()' in the error handling path of 'kzalloc()', which removes the new pcm instance from the snd card before returns with an error code. Signed-off-by:
Bo Chen <chenbo@pdx.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit f16041df upstream. HP Z2 G4 requires the same workaround as other HP machines that have no mic-pin detection. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit 986376b6 upstream. We have several Lenovo AIOs like M810z, M820z and M920z, they have the same design for mic-mute hotkey and led and they use the same codec with the same pin configuration, so use the pin conf table to apply fix to all of them. Fixes: 29693efc ("ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Qu Wenruo authored
commit ac0b4145 upstream. [BUG] Btrfs can create compressed extent without checksum (even though it shouldn't), and if we then try to replace device containing such extent, the result device will contain all the uncompressed data instead of the compressed one. Test case already submitted to fstests: https://patchwork.kernel.org/patch/10442353/ [CAUSE] When handling compressed extent without checksum, device replace will goe into copy_nocow_pages() function. In that function, btrfs will get all inodes referring to this data extents and then use find_or_create_page() to get pages direct from that inode. The problem here is, pages directly from inode are always uncompressed. And for compressed data extent, they mismatch with on-disk data. Thus this leads to corrupted compressed data extent written to replace device. [FIX] In this attempt, we could just remove the "optimization" branch, and let unified scrub_pages() to handle it. Although scrub_pages() won't bother reusing page cache, it will be a little slower, but it does the correct csum checking and won't cause such data corruption caused by "optimization". Note about the fix: this is the minimal fix that can be backported to older stable trees without conflicts. The whole callchain from copy_nocow_pages() can be deleted, and will be in followup patches. Fixes: ff023aac ("Btrfs: add code to scrub to copy read data to another disk") CC: stable@vger.kernel.org # 4.4+ Reported-by:
James Harvey <jamespharvey20@gmail.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> [ remove code removal, add note why ] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Su Yue authored
commit 090a127a upstream. In cow_file_range(), create_io_em() may fail, but its return value is not recorded. Then return value may be 0 even it failed which is a wrong behavior. Let cow_file_range() return PTR_ERR(em) if create_io_em() failed. Fixes: 6f9994db ("Btrfs: create a helper to create em for IO") CC: stable@vger.kernel.org # 4.11+ Signed-off-by:
Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Omar Sandoval authored
commit fd4e994b upstream. If we have invalid flags set, when we error out we must drop our writer counter and free the buffer we allocated for the arguments. This bug is trivially reproduced with the following program on 4.7+: #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/btrfs.h> #include <linux/btrfs_tree.h> int main(int argc, char **argv) { struct btrfs_ioctl_vol_args_v2 vol_args = { .flags = UINT64_MAX, }; int ret; int fd; if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } fd = open(argv[1], O_WRONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args); if (ret == -1) perror("ioctl"); close(fd); return EXIT_SUCCESS; } When unmounting the filesystem, we'll hit the WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the filesystem to be remounted read-only as the writer count will stay lifted. Fixes: 6b526ed7 ("btrfs: introduce device delete by devid") CC: stable@vger.kernel.org # 4.9+ Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Omar Sandoval authored
commit b5c40d59 upstream. In btrfs_clone_files(), we must check the NODATASUM flag while the inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags() will change the flags after we check and we can end up with a party checksummed file. The race window is only a few instructions in size, between the if and the locks which is: 3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) 3835 return -EISDIR; where the setflags must be run and toggle the NODATASUM flag (provided the file size is 0). The clone will block on the inode lock, segflags takes the inode lock, changes flags, releases log and clone continues. Not impossible but still needs a lot of bad luck to hit unintentionally. Fixes: 0e7b824c ("Btrfs: don't make a file partly checksummed through file clone") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Tetsuo Handa authored
commit 84d0c27d upstream. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116fSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
commit 4f2f76f7 upstream. ext4_resize_fs() has an off-by-one bug when checking whether growing of a filesystem will not overflow inode count. As a result it allows a filesystem with 8192 inodes per group to grow to 64TB which overflows inode count to 0 and makes filesystem unusable. Fix it. Cc: stable@vger.kernel.org Fixes: 3f8a6411Reported-by:
Jaco Kroon <jaco@uls.co.za> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Theodore Ts'o authored
commit 8a2b307c upstream. Ext4 will always create ext4 extended attributes which do not have a value (where e_value_size is zero) with e_value_offs set to zero. In most places e_value_offs will not be used in a substantive way if e_value_size is zero. There was one exception to this, which is in ext4_xattr_set_entry(), where if there is a maliciously crafted file system where there is an extended attribute with e_value_offs is non-zero and e_value_size is 0, the attempt to remove this xattr will result in a negative value getting passed to memmove, leading to the following sadness: [ 41.225365] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 44.538641] BUG: unable to handle kernel paging request at ffff9ec9a3000000 [ 44.538733] IP: __memmove+0x81/0x1a0 [ 44.538755] PGD 1249bd067 P4D 1249bd067 PUD 1249c1067 PMD 80000001230000e1 [ 44.538793] Oops: 0003 [#1] SMP PTI [ 44.539074] CPU: 0 PID: 1470 Comm: poc Not tainted 4.16.0-rc1+ #1 ... [ 44.539475] Call Trace: [ 44.539832] ext4_xattr_set_entry+0x9e7/0xf80 ... [ 44.539972] ext4_xattr_block_set+0x212/0xea0 ... [ 44.540041] ext4_xattr_set_handle+0x514/0x610 [ 44.540065] ext4_xattr_set+0x7f/0x120 [ 44.540090] __vfs_removexattr+0x4d/0x60 [ 44.540112] vfs_removexattr+0x75/0xe0 [ 44.540132] removexattr+0x4d/0x80 ... [ 44.540279] path_removexattr+0x91/0xb0 [ 44.540300] SyS_removexattr+0xf/0x20 [ 44.540322] do_syscall_64+0x71/0x120 [ 44.540344] entry_SYSCALL_64_after_hwframe+0x21/0x86 https://bugzilla.kernel.org/show_bug.cgi?id=199347 This addresses CVE-2018-10840. Reported-by:
"Xu, Wen" <wen.xu@gatech.edu> Signed-off-by:
-
Theodore Ts'o authored
commit eb9b5f01 upstream. If ext4_find_inline_data_nolock() returns an error it needs to get reflected up to ext4_iget(). In order to fix this, ext4_iget_extra_inode() needs to return an error (and not return void). This is related to "ext4: do not allow external inodes for inline data" (which fixes CVE-2018-11412) in that in the errors=continue case, it would be useful to for userspace to receive an error indicating that file system is corrupted. Signed-off-by:
-
Theodore Ts'o authored
commit 117166ef upstream. The inline data feature was implemented before we added support for external inodes for xattrs. It makes no sense to support that combination, but the problem is that there are a number of extended attribute checks that are skipped if e_value_inum is non-zero. Unfortunately, the inline data code is completely e_value_inum unaware, and attempts to interpret the xattr fields as if it were an inline xattr --- at which point, Hilarty Ensues. This addresses CVE-2018-11412. https://bugzilla.kernel.org/show_bug.cgi?id=199803Reported-by:
Jann Horn <jannh@google.com> Reviewed-by:
-
Lukas Czerner authored
commit eee597ac upstream. Currently in ext4_punch_hole we're going to skip the mtime update if there are no actual blocks to release. However we've actually modified the file by zeroing the partial block so the mtime should be updated. Moreover the sync and datasync handling is skipped as well, which is also wrong. Fix it. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Joe Habermann <joe.habermann@quantum.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
commit 2ee3ee06 upstream. When ext4_ind_map_blocks() computes a length of a hole, it doesn't count with the fact that mapped offset may be somewhere in the middle of the completely empty subtree. In such case it will return too large length of the hole which then results in lseek(SEEK_DATA) to end up returning an incorrect offset beyond the end of the hole. Fix the problem by correctly taking offset within a subtree into account when computing a length of a hole. Fixes: facab4d9 CC: stable@vger.kernel.org Reported-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Trond Myklebust authored
commit 3be0f80b upstream. If the previous request on a slot was interrupted before it was processed by the server, then our slot sequence number may be out of whack, and so we try the next operation using the old sequence number. The problem with this, is that not all servers check to see that the client is replaying the same operations as previously when they decide to go to the replay cache, and so instead of the expected error of NFS4ERR_SEQ_FALSE_RETRY, we get a replay of the old reply, which could (if the operations match up) be mistaken by the client for a new reply. To fix this, we attempt to send a COMPOUND containing only the SEQUENCE op in order to resync our slot sequence number. Cc: Olga Kornievskaia <olga.kornievskaia@gmail.com> [olga.kornievskaia@gmail.com: fix an Oops] Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit a447da7d ] syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559 ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit 52acf73b ] Recently people reported the NIC stops working after "ifdown eth0; ifup eth0". It turns out in this case the TX queues are not enabled, after the refactoring of the common detach logic: when the NIC has sub-channels, usually we enable all the TX queues after all sub-channels are set up: see rndis_set_subchannel() -> netif_device_attach(), but in the case of "ifdown eth0; ifup eth0" where the number of channels doesn't change, we also must make sure the TX queues are enabled. The patch fixes the regression. Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit fd3a8862 ] Tun, tap, virtio, packet and uml vector all use struct virtio_net_hdr to communicate packet metadata to userspace. For skbuffs with vlan, the first two return the packet as it may have existed on the wire, inserting the VLAN tag in the user buffer. Then virtio_net_hdr.csum_start needs to be adjusted by VLAN_HLEN bytes. Commit f09e2249 ("macvtap: restore vlan header on user read") added this feature to macvtap. Commit 3ce9b20f ("macvtap: Fix csum_start when VLAN tags are present") then fixed up csum_start. Virtio, packet and uml do not insert the vlan header in the user buffer. When introducing virtio_net_hdr_from_skb to deduplicate filling in the virtio_net_hdr, the variant from macvtap which adds VLAN_HLEN was applied uniformly, breaking csum offset for packets with vlan on virtio and packet. Make insertion of VLAN_HLEN optional. Convert the callers to pass it when needed. Fixes: e858fae2 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Fixes: 1276f24e ("packet: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 6c206b20 ] After commit 6b229cf7 ("udp: add batching to udp_rmem_release()") the sk_rmem_alloc field does not measure exactly anymore the receive queue length, because we batch the rmem release. The issue is really apparent only after commit 0d4a6608 ("udp: do rmem bulk free even if the rx sk queue is empty"): the user space can easily check for an empty socket with not-0 queue length reported by the 'ss' tool or the procfs interface. We need to use a custom UDP helper to report the correct queue length, taking into account the forward allocation deficit. Reported-by: trevor.francis@46labs.com Fixes: 6b229cf7 ("UDP: add batching to udp_rmem_release()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 6d8c50dc ] fchownat() doesn't even hold refcnt of fd until it figures out fd is really needed (otherwise is ignored) and releases it after it resolves the path. This means sock_close() could race with sockfs_setattr(), which leads to a NULL pointer dereference since typically we set sock->sk to NULL in ->release(). As pointed out by Al, this is unique to sockfs. So we can fix this in socket layer by acquiring inode_lock in sock_close() and checking against NULL in sockfs_setattr(). sock_release() is called in many places, only the sock_close() path matters here. And fortunately, this should not affect normal sock_close() as it is only called when the last fd refcnt is gone. It only affects sock_close() with a parallel sockfs_setattr() in progress, which is not common. Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Reported-by:
shankarapailoor <shankarapailoor@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Frank van der Linden authored
[ Upstream commit 4fd44a98 ] commit 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
-
Davide Caratti authored
[ Upstream commit 8d499533 ] use nla_strlcpy() to avoid copying data beyond the length of TCA_DEF_DATA netlink attribute, in case it is less than SIMP_MAX_DATA and it does not end with '\0' character. v2: fix errors in the commit message, thanks Hangbin Liu Fixes: fa1b1cff ("net_cls_act: Make act_simple use of netlink policy.") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 349b71d6 ] When pskb_trim_rcsum fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pskb_trim_rcsum. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 09757646 ] IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by:
Martin KaFai Lau <kafai@fb.com> Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff31 ("ipv6: Don't create clones of host routes.") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
David Ahern <dsahern@gmail.com> Acked-by:
-
Bjørn Mork authored
[ Upstream commit 49c2c3f2 ] Commit 4a0e3e98 ("cdc_ncm: Add support for moving NDP to end of NCM frame") added logic to reserve space for the NDP at the end of the NTB/skb. This reservation did not take the final alignment of the NDP into account, causing us to reserve too little space. Additionally the padding prior to NDP addition did not ensure there was enough space for the NDP. The NTB/skb with the NDP appended would then exceed the configured max size. This caused the final padding of the NTB to use a negative count, padding to almost INT_MAX, and resulting in: [60103.825970] BUG: unable to handle kernel paging request at ffff9641f2004000 [60103.825998] IP: __memset+0x24/0x30 [60103.826001] PGD a6a06067 P4D a6a06067 PUD 4f65a063 PMD 72003063 PTE 0 [60103.826013] Oops: 0002 [#1] SMP NOPTI [60103.826018] Modules linked in: (removed( [60103.826158] CPU: 0 PID: 5990 Comm: Chrome_DevTools Tainted: G O 4.14.0-3-amd64 #1 Debian 4.14.17-1 [60103.826162] Hardware name: LENOVO 20081 BIOS 41CN28WW(V2.04) 05/03/2012 [60103.826166] task: ffff964193484fc0 task.stack: ffffb2890137c000 [60103.826171] RIP: 0010:__memset+0x24/0x30 [60103.826174] RSP: 0000:ffff964316c03b68 EFLAGS: 00010216 [60103.826178] RAX: 0000000000000000 RBX: 00000000fffffffd RCX: 000000001ffa5000 [60103.826181] RDX: 0000000000000005 RSI: 0000000000000000 RDI: ffff9641f2003ffc [60103.826184] RBP: ffff964192f6c800 R08: 00000000304d434e R09: ffff9641f1d2c004 [60103.826187] R10: 0000000000000002 R11: 00000000000005ae R12: ffff9642e6957a80 [60103.826190] R13: ffff964282ff2ee8 R14: 000000000000000d R15: ffff9642e4843900 [60103.826194] FS: 00007f395aaf6700(0000) GS:ffff964316c00000(0000) knlGS:0000000000000000 [60103.826197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60103.826200] CR2: ffff9641f2004000 CR3: 0000000013b0c000 CR4: 00000000000006f0 [60103.826204] Call Trace: [60103.826212] <IRQ> [60103.826225] cdc_ncm_fill_tx_frame+0x5e3/0x740 [cdc_ncm] [60103.826236] cdc_ncm_tx_fixup+0x57/0x70 [cdc_ncm] [60103.826246] usbnet_start_xmit+0x5d/0x710 [usbnet] [60103.826254] ? netif_skb_features+0x119/0x250 [60103.826259] dev_hard_start_xmit+0xa1/0x200 [60103.826267] sch_direct_xmit+0xf2/0x1b0 [60103.826273] __dev_queue_xmit+0x5e3/0x7c0 [60103.826280] ? ip_finish_output2+0x263/0x3c0 [60103.826284] ip_finish_output2+0x263/0x3c0 [60103.826289] ? ip_output+0x6c/0xe0 [60103.826293] ip_output+0x6c/0xe0 [60103.826298] ? ip_forward_options+0x1a0/0x1a0 [60103.826303] tcp_transmit_skb+0x516/0x9b0 [60103.826309] tcp_write_xmit+0x1aa/0xee0 [60103.826313] ? sch_direct_xmit+0x71/0x1b0 [60103.826318] tcp_tasklet_func+0x177/0x180 [60103.826325] tasklet_action+0x5f/0x110 [60103.826332] __do_softirq+0xde/0x2b3 [60103.826337] irq_exit+0xae/0xb0 [60103.826342] do_IRQ+0x81/0xd0 [60103.826347] common_interrupt+0x98/0x98 [60103.826351] </IRQ> [60103.826355] RIP: 0033:0x7f397bdf2282 [60103.826358] RSP: 002b:00007f395aaf57d8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff6e [60103.826362] RAX: 0000000000000000 RBX: 00002f07bc6d0900 RCX: 00007f39752d7fe7 [60103.826365] RDX: 0000000000000022 RSI: 0000000000000147 RDI: 00002f07baea02c0 [60103.826368] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [60103.826371] R10: 00000000ffffffff R11: 0000000000000000 R12: 00002f07baea02c0 [60103.826373] R13: 00002f07bba227a0 R14: 00002f07bc6d090c R15: 0000000000000000 [60103.826377] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 [60103.826442] RIP: __memset+0x24/0x30 RSP: ffff964316c03b68 [60103.826444] CR2: ffff9641f2004000 Commit e1069bbf ("net: cdc_ncm: Reduce memory use when kernel memory low") made this bug much more likely to trigger by reducing the NTB size under memory pressure. Link: https://bugs.debian.org/893393Reported-by:
Горбешко Богдан <bodqhrohro@gmail.com> Reported-and-tested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Xiangning Yu authored
[ Upstream commit eb55bbf8 ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by:
Xiangning Yu <yuxiangning@gmail.com> Signed-off-by:
-
- 20 Jun, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit 02db5571 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 8810f751 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 762221f0 ] The raid6 corruption is that, suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content. We've fixed normal reads to rebuild raid6 correctly with more retries in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix scrub to do the exactly same rebuild process. [1]: https://patchwork.kernel.org/patch/10091755/Signed-off-by:
-
Sasha Levin authored
This reverts commit d91bb7c6. This commit used an incorrect log message. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Russell King authored
[ Upstream commit 2d7b3c64 ] When a panic() occurs, the kexec code uses smp_send_stop() to stop the other CPUs, but this results in the CPU register state not being saved, and gdb is unable to inspect the state of other CPUs. Commit 0ee59413 ("x86/panic: replace smp_send_stop() with kdump friendly version in panic path") addressed the issue on x86, but ignored other architectures. Address the issue on ARM by splitting out the crash stop implementation to crash_smp_send_stop() and adding the necessary protection. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Łukasz Stelmach authored
[ Upstream commit f2ae9de0 ] The hypervisor setup before __enter_kernel destroys the value sotred in r1. The value needs to be restored just before the jump. Fixes: 6b52f7bd ("ARM: hyp-stub: Use r1 for the soft-restart address") Signed-off-by:
Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Łukasz Stelmach authored
[ Upstream commit e07e3c33 ] In commit 639da5ee ("ARM: add an extra temp register to the low level debugging addruart macro") an additional temporary register was added to the addruart macro, but the decompressor code wasn't updated. Fixes: 639da5ee ("ARM: add an extra temp register to the low level debugging addruart macro") Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 4f74d72a ] When CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET is an arbitrary multiple of PAGE_SIZE in the interval [0, 2MB). The EFI stub does not account for the potential misalignment of TEXT_OFFSET relative to EFI_KIMG_ALIGN, and produces a randomized physical offset which is always a round multiple of EFI_KIMG_ALIGN. This may result in statically allocated objects whose alignment exceeds PAGE_SIZE to appear misaligned in memory. This has been observed to result in spurious stack overflow reports and failure to make use of the IRQ stacks, and theoretically could result in a number of other issues. We can OR in the low bits of TEXT_OFFSET to ensure that we have the necessary offset (and hence preserve the misalignment of TEXT_OFFSET relative to EFI_KIMG_ALIGN), so let's do that. Reported-by:
Kim Phillips <kim.phillips@arm.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 6f26b367 ("arm64: kaslr: increase randomization granularity") Link: http://lkml.kernel.org/r/20180518140841.9731-2-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
