- 26 Sep, 2013 25 commits
-
-
Libo Chen authored
Use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
Libo Chen <libo.chen@huawei.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Senna Tschudin authored
The variable execute_shutdown is only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Elad Wexler authored
This change improves code readability & is less error-prone. For example: case adding more error paths one should remember to call 'mutex_unlock' Signed-off-by:
Elad Wexler <elad.wexler@gmail.com> Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Michal Simek authored
Using devres functions simplify driver error path. - Use devm_kzalloc - Use devm_request_irq Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Fengguang Wu authored
Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Rostislav Lisovy <lisovy@gmail.com> Signed-off-by:
-
Tomas Winkler authored
fixmem32 is assigned to address of res->data member so the address is always valid Actually since we are not checking for res != NULL static analyzing is complaining about referencing the pointer and consequent check for null. The code snippet looks confusing also for human eyes. Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Chen Gang authored
bmp085_get_of_properties() is called by bmp085_init_client() which is called by bmp085_probe() which is an EXPORT_SYMBOL_GPL function. bmp085_probe() is really used as a probe function by another modules (e.g. bmp085-i2c.c, bmp085-spi.c). Except bmp085_get_of_properties(), all functions have no '__init', so need remove '__init' from bmp085_get_of_properties() too, or at least, it will report related warning: WARNING: vmlinux.o(.text+0x4c8a07): Section mismatch in reference from the variable .LM171 to the variable .init.text:_bmp085_get_of_properties The function .LM171() references the variable __init _bmp085_get_of_properties. This is often because .LM171 lacks a __init annotation or the annotation of _bmp085_get_of_properties is wrong. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Tomas Winkler authored
we can call list_del_init regardless the client is linked or not it is always properly initialized Signed-off-by:
-
Tomas Winkler authored
this eventually allows as use a single write queue both for control and data messages and removing possible race Signed-off-by:
-
Tomas Winkler authored
ENODEV will cause application to try to reconnect since it assumes that device went through the reset write errors are not always fatal it can happen due to resource contention Signed-off-by:
-
Alexander Usyskin authored
Fix calling function names in debug prints. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Alexander Usyskin authored
define cl_dbg and cl_err macros that add me and host id prefix for debug and error log messages so we can track for the client context of the flow. Signed-off-by:
-
Tomas Winkler authored
mei_io_cb_free follows kfree design and check for NULL internally Signed-off-by:
-
Tomas Winkler authored
1. Return zero on zero length read and writes 2. For a too large write return -EFBIG as defined in man write(2) EFBIG An attempt was made to write a file that exceeds the implementation-defined maximum file size or the process's file size limit, or to write at a position past the maximum allowed offset. Signed-off-by: -
Tomas Winkler authored
hbm.c: In function mei_hbm_me_cl_allocate: hbm.c:52:212: warning: format %zd expects argument of type signed size_t but argument 4 has type long unsigned Signed-off-by:
-
Alexander Usyskin authored
1. return -EFUALT when copy_from_user fails 2. display error message on failure in error level Signed-off-by:
-
Tomas Winkler authored
To make static analyzers happy validated that sizeof me_clients_map is larger than sizeof valid_addresses from the enumeration response before memcpy We can use BUILD_ON macro as both arrays are defined statically Signed-off-by:
-
Tomas Winkler authored
mei_cl_link is called both from mei_open and also from in-kernel drivers so we need to protect open_handle_count from overflow Signed-off-by:
-
- 23 Sep, 2013 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are a number of small staging tree and iio driver fixes. Nothing major, just lots of little things" * tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:buffer_cb: Add missing iio_buffer_init() iio: Prevent race between IIO chardev opening and IIO device free iio: fix: Keep a reference to the IIO device for open file descriptors iio: Stop sampling when the device is removed iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume iio: iio_device_add_event_sysfs() bugfix staging: iio: ade7854-spi: Fix return value staging:iio:hmc5843: Fix measurement conversion iio: isl29018: Fix uninitialized value staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver. iio: at91: fix adc_clk overflow staging: line6: add bounds check in snd_toneport_source_put() Staging: comedi: Fix dependencies for drivers misclassified as PCI staging: r8188eu: Adjust RX gain staging: r8188eu: Fix smatch warning in core/rtw_ieee80211. staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 3.12-rc2. One is a revert of a EHCI change that isn't quite ready for 3.12. Others are minor things, gadget fixes, Kconfig fixes, and some quirks and documentation updates. All have been in linux-next for a bit" * tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: pl2303: distinguish between original and cloned HX chips USB: Faraday fotg210: fix email addresses USB: fix typo in usb serial simple driver Kconfig Revert "USB: EHCI: support running URB giveback in tasklet context" usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr usb: s3c-hsotg: fix unregistration function usb: gadget: f_mass_storage: reset endpoint driver data when disabled usb: host: fsl-mph-dr-of: Staticize local symbols usb: gadget: f_eem: Staticize eem_alloc usb: gadget: f_ecm: Staticize ecm_alloc usb: phy: omap-usb3: Fix return value usb: dwc3: gadget: avoid memory leak when failing to allocate all eps usb: dwc3: remove extcon dependency usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register() usb: dwc3: pci: add support for BayTrail usb: gadget: cdc2: fix conversion to new interface of f_ecm usb: gadget: fix a bug and a WARN_ON in dummy-hcd usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: - some small fixes for msm and exynos - a regression revert affecting nouveau users with old userspace - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) Revert "drm: mark context support as a legacy subsystem" drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency drm/msm: drop unnecessary set_need_resched() drm/i915: kill set_need_resched drm/msm: fix potential NULL pointer dereference drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints ...
-
- 22 Sep, 2013 3 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block IO fixes from Jens Axboe: "After merge window, no new stuff this time only a collection of neatly confined and simple fixes" * 'for-3.12/core' of git://git.kernel.dk/linux-block: cfq: explicitly use 64bit divide operation for 64bit arguments block: Add nr_bios to block_rq_remap tracepoint If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up. bio-integrity: Fix use of bs->bio_integrity_pool after free blkcg: relocate root_blkg setting and clearing block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) block: trace all devices plug operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are mostly bug fixes and a two small performance fixes. The most important of the bunch are Josef's fix for a snapshotting regression and Mark's update to fix compile problems on arm" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged Btrfs: actually log directory we are fsync()'ing Btrfs: actually limit the size of delalloc range Btrfs: allocate the free space by the existed max extent size when ENOSPC ...
-
Anatol Pomozov authored
'samples' is 64bit operant, but do_div() second parameter is 32. do_div silently truncates high 32 bits and calculated result is invalid. In case if low 32bit of 'samples' are zeros then do_div() produces kernel crash. Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 21 Sep, 2013 8 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-3.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for 3.12 A series of wrong 'struct dev' assumptions in suspend/resume callbacks following on from this issue being identified in a new driver review. One to watch out for in future. A number of driver specific fixes 1) at91 - fix a overflow in clock rate computation 2) dummy - Kconfig dependency issue 3) isl29018 - uninitialized value 4) hmc5843 - measurement conversion bug introduced by recent cleanup. 5) ade7854-spi - wrong return value. Some IIO core fixes 1) Wrong value picked up for event code creation for a modified channel 2) A null dereference on failure to initialize a buffer after no buffer has been in use, when using the available_scan_masks approach. 3) Sampling not stopped when a device is removed. Effects forced removal such as hot unplugging. 4) Prevent device going away if a chrdev is still open in userspace. 5) Prevent race on chardev opening and device being freed. 6) Add a missing iio_buffer_init in the call back buffer. These last few are the first part of a set from Lars-Peter Clausen who has been taking a closer look at our removal paths and buffer handling than anyone has for quite some time.
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfix from Trond Myklebust: "Fix a regression due to incorrect sharing of gss auth caches" * tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: RPCSEC_GSS: fix crash on destroying gss auth
-
Jun'ichi Nomura authored
Adding the number of bios in a remapped request to 'block_rq_remap' tracepoint. Request remapper clones bios in a request to track the completion status of each bio. So the number of bios can be useful information for investigation. Related discussions: http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html http://www.redhat.com/archives/dm-devel/2013-September/msg00024.htmlSigned-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Josef Bacik authored
Users have been complaining of the uuid tree stuff warning that there is no uuid root when trying to do snapshot operations. This is because if you mount -o ro we will not create the uuid tree. But then if you mount -o rw,remount we will still not create it and then any subsequent snapshot/subvol operations you try to do will fail gloriously. Fix this by creating the uuid_root on remount rw if it was not already there. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Mark Fasheh authored
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data back to it's argument struct. Unfortunately, not all architectures provide __put_user_unaligned(), so compiles break on them if btrfs is selected. Instead, just copy the whole struct in / out at the start and end of operations, respectively. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Guangyu Sun authored
Commit 2bc55652 (Btrfs: don't update atime on RO subvolumes) ensures that the access time of an inode is not updated when the inode lives in a read-only subvolume. However, if a directory on a read-only subvolume is accessed, the atime is updated. This results in a write operation to a read-only subvolume. I believe that access times should never be updated on read-only subvolumes. To reproduce: # mkfs.btrfs -f /dev/dm-3 (...) # mount /dev/dm-3 /mnt # btrfs subvol create /mnt/sub Create subvolume '/mnt/sub' # mkdir /mnt/sub/dir # echo "abc" > /mnt/sub/dir/file # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap' # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:21:49.389157126 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 # ls /mnt/rosnap/dir file # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:22:56.797151670 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 Reported-by:
Koen De Wit <koen.de.wit@oracle.com> Signed-off-by:
Guangyu Sun <guangyu.sun@oracle.com> Signed-off-by:
-
Frank Holton authored
The kernel log entries for device label %s and device fsid %pU are missing the btrfs: prefix. Add those here. Signed-off-by:
Frank Holton <fholton@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
It's still possible to flip the filesystem into RW mode after it's remounted RO due to an abort. There are lots of places that check for the superblock error bit and will not write data, but we should not let the filesystem appear read-write. Signed-off-by:
-
