Pull powerpc fixes from Michael Ellerman:

 - Fix oops in 32-bit BPF tail call tests

 - Add missing declaration for machine_check_early_boot()

Thanks to Christophe Leroy and Naveen N. Rao.

* tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Add missing declaration for machine_check_early_boot()
  powerpc/bpf/32: Fix Oops on tail call tests

Pull input fix from Dmitry Torokhov:

 - a fix for Raydium touchscreen driver to stop leaking memory when
   sending commands to the chip

* tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()

Pull i2c fixes from Wolfram Sang:
 "A power state fix in the core for ACPI devices, a regression fix
  regarding bus recovery for the cadence driver, a DMA handling fix for
  the imx driver, and two error path fixes (npcm7xx and qcom-geni)"

* tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set
  i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
  i2c: cadence: Fix regression with bus recovery
  i2c: Restore initial power state if probe fails
  i2c: npcm7xx: Fix error handling in npcm_i2c_init()

Pull dax fixes from Dan Williams:
 "A few bug fixes around the handling of "Soft Reserved" memory and
  memory tiering information.

  Linux is starting to enounter more real world systems that deploy an
  ACPI HMAT to describe different performance classes of memory, as well
  the "special purpose" (Linux "Soft Reserved") designation from EFI.

  These fixes result from that testing.

  It has all appeared in -next for a while with no known issues.

   - Fix duplicate overlapping device-dax instances for HMAT described
     "Soft Reserved" Memory

   - Fix missing node targets in the sysfs representation of memory
     tiers

   - Remove a confusing variable initialization"

* tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: Fix duplicate 'hmem' device registration
  ACPI: HMAT: Fix initiator registration for single-initiator systems
  ACPI: HMAT: remove unnecessary variable initialization

Pull block fixes from Jens Axboe:
 "Just a small NVMe merge for this week, fixing protection of the name
  space list, and a missing clear of a reserved field when unused"

* tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux:
  nvme: fix SRCU protection of nvme_ns_head list
  nvme-pci: clear the prp2 field when not used

Pull pin control fixes from Linus Walleij:
 "Three driver fixes. The Intel fix looks like the most important.

   - Fix a potential divide by zero in pinctrl-singe (OMAP and
     HiSilicon)

   - Disable IRQs on startup in the Mediatek driver. This is a classic,
     we should be looking out for this more.

   - Save and restore pins in 'direct IRQ' mode in the Intel driver,
     this works around firmware bugs"

* tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Save and restore pins in "direct IRQ" mode
  pinctrl: meditatek: Startup with the IRQs disabled
  pinctrl: single: Fix potential division by zero

Pull RISC-V fixes from Palmer Dabbelt:

 - build fix for the NR_CPUS Kconfig SBI version dependency

 - fixes to early memory initialization, to fix page permissions in EFI
   and post-initmem-free

 - build fix for the VDSO, to avoid trying to profile the VDSO functions

 - fixes for kexec crash handling, to fix multi-core and interrupt
   related initialization inside the crash kernel

 - fix for a race condition when handling multiple concurrect kernel
   stack overflows

* tag 'riscv-for-linus-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Fixup crash_smp_send_stop without multi cores
  riscv: kexec: Fixup irq controller broken in kexec crash path
  riscv: mm: Proper page permissions after initmem free
  riscv: vdso: fix section overlapping under some conditions
  riscv: fix race when vmap stack overflow
  riscv: Sync efi page table's kernel mappings before switching
  riscv: Fix NR_CPUS range conditions

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix ambiguous TRIM and DISCARD args
   - Fix removal of debugfs file for mmc_test

  MMC host:
   - mtk-sd: Add missing clk_disable_unprepare() in an error path
   - sdhci: Fix I/O voltage switch delay for UHS-I SD cards
   - sdhci-esdhc-imx: Fix CQHCI exit halt state check
   - sdhci-sprd: Fix voltage switch"

* tag 'mmc-v6.1-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix no reset data and command after voltage switch
  mmc: sdhci: Fix voltage switch delay
  mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()
  mmc: mmc_test: Fix removal of debugfs file
  mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check
  mmc: core: Fix ambiguous TRIM and DISCARD arg

Pull iommu fixes from Joerg Roedel:
 "Intel VT-d fixes:

   - IO/TLB flush fix

   - Various pci_dev refcount fixes"

* tag 'iommu-fixes-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init()
  iommu/vt-d: Fix PCI device refcount leak in has_external_pci()
  iommu/vt-d: Fix PCI device refcount leak in prq_event_thread()
  iommu/vt-d: Add a fix for devices need extra dtlb flush

The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.

This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.

When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.

Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.

  [ bp: Rework a bit. ]

Fixes: caa0ff24 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a kmemleak when test the raydium_i2c_ts with bpf mock device:

  unreferenced object 0xffff88812d3675a0 (size 8):
    comm "python3", pid 349, jiffies 4294741067 (age 95.695s)
    hex dump (first 8 bytes):
      11 0e 10 c0 01 00 04 00                          ........
    backtrace:
      [<0000000068427125>] __kmalloc+0x46/0x1b0
      [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
      [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts]
      [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
      [<00000000a310de16>] i2c_device_probe+0x651/0x680
      [<00000000f5a96bf3>] really_probe+0x17c/0x3f0
      [<00000000096ba499>] __driver_probe_device+0xe3/0x170
      [<00000000c5acb4d9>] driver_probe_device+0x49/0x120
      [<00000000264fe082>] __device_attach_driver+0xf7/0x150
      [<00000000f919423c>] bus_for_each_drv+0x114/0x180
      [<00000000e067feca>] __device_attach+0x1e5/0x2d0
      [<0000000054301fc2>] bus_probe_device+0x126/0x140
      [<00000000aad93b22>] device_add+0x810/0x1130
      [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
      [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
      [<00000000ffec4177>] of_i2c_notify+0x100/0x160
  unreferenced object 0xffff88812d3675c8 (size 8):
    comm "python3", pid 349, jiffies 4294741070 (age 95.692s)
    hex dump (first 8 bytes):
      22 00 36 2d 81 88 ff ff                          ".6-....
    backtrace:
      [<0000000068427125>] __kmalloc+0x46/0x1b0
      [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
      [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts]
      [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
      [<00000000a310de16>] i2c_device_probe+0x651/0x680
      [<00000000f5a96bf3>] really_probe+0x17c/0x3f0
      [<00000000096ba499>] __driver_probe_device+0xe3/0x170
      [<00000000c5acb4d9>] driver_probe_device+0x49/0x120
      [<00000000264fe082>] __device_attach_driver+0xf7/0x150
      [<00000000f919423c>] bus_for_each_drv+0x114/0x180
      [<00000000e067feca>] __device_attach+0x1e5/0x2d0
      [<0000000054301fc2>] bus_probe_device+0x126/0x140
      [<00000000aad93b22>] device_add+0x810/0x1130
      [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
      [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
      [<00000000ffec4177>] of_i2c_notify+0x100/0x160

After BANK_SWITCH command from i2c BUS, no matter success or error
happened, the tx_buf should be freed.

Fixes: 3b384bd6 ("Input: raydium_ts_i2c - do not split tx transactions")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull sound fixes from Takashi Iwai:
 "Likely the last piece for 6.1; the only significant fixes are ASoC
  core ops fixes, while others are device-specific (rather minor) fixes
  in ASoC and FireWire drivers.

  All appear safe enough to take as a late stage material"

* tag 'sound-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: dice: fix regression for Lexicon I-ONIX FW810S
  ASoC: cs42l51: Correct PGA Volume minimum value
  ASoC: ops: Correct bounds check for second channel on SX controls
  ASoC: tlv320adc3xxx: Fix build error for implicit function declaration
  ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()
  ASoC: ops: Fix bounds check for _sx controls
  ASoC: fsl_micfil: explicitly clear CHnF flags
  ASoC: fsl_micfil: explicitly clear software reset bit

Pull drm fixes from Dave Airlie:
 "Things do seem to have finally settled down, just four i915 and one
  amdgpu this week. Probably won't have much for next week if you do
  push rc8 out.

  i915:
   - Fix dram info readout
   - Remove non-existent pipes from bigjoiner pipe mask
   - Fix negative value passed as remaining time
   - Never return 0 if not all requests retired

  amdgpu:
   - VCN fix for vangogh"

* tag 'drm-fixes-2022-12-02' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: enable Vangogh VCN indirect sram mode
  drm/i915: Never return 0 if not all requests retired
  drm/i915: Fix negative value passed as remaining time
  drm/i915: Remove non-existent pipes from bigjoiner pipe mask
  drm/i915/mtl: Fix dram info readout

Pull misc hotfixes from Andrew Morton:
 "15 hotfixes,  11 marked cc:stable.

  Only three or four of the latter address post-6.0 issues, which is
  hopefully a sign that things are converging"

* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
  Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
  drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
  mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
  mm/khugepaged: fix GUP-fast interaction by sending IPI
  mm/khugepaged: take the right locks for page table retraction
  mm: migrate: fix THP's mapcount on isolation
  mm: introduce arch_has_hw_nonleaf_pmd_young()
  mm: add dummy pmd_young() for architectures not having it
  mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
  tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
  nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
  hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
  madvise: use zap_page_range_single for madvise dontneed
  mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE

The V4L2_MEMORY_USERPTR interface is long deprecated and shouldn't be
used (and is discouraged for any modern v4l drivers).  And Seth Jenkins
points out that the fallback to VM_PFNMAP/VM_IO is fundamentally racy
and dangerous.

Note that it's not even a case that should trigger, since any normal
user pointer logic ends up just using the pin_user_pages_fast() call
that does the proper page reference counting.  That's not the problem
case, only if you try to use special device mappings do you have any
issues.

Normally I'd just remove this during the merge window, but since Seth
pointed out the problem cases, we really want to know as soon as
possible if there are actually any users of this odd special case of a
legacy interface.  Neither Hans nor Mauro seem to think that such
mis-uses of the old legacy interface should exist.  As Mauro says:

 "See, V4L2 has actually 4 streaming APIs:
        - Kernel-allocated mmap (usually referred simply as just mmap);
        - USERPTR mmap;
        - read();
        - dmabuf;

  The USERPTR is one of the oldest way to use it, coming from V4L
  version 1 times, and by far the least used one"

And Hans chimed in on the USERPTR interface:

 "To be honest, I wouldn't mind if it goes away completely, but that's a
  bit of a pipe dream right now"

but while removing this legacy interface entirely may be a pipe dream we
can at least try to remove the unlikely (and actively broken) case of
using special device mappings for USERPTR accesses.

This replaces it with a WARN_ONCE() that we can remove once we've
hopefully confirmed that no actual users exist.

NOTE! Longer term, this means that a 'struct frame_vector' only ever
contains proper page pointers, and all the games we have with converting
them to pages can go away (grep for 'frame_vector_to_pages()' and the
uses of 'vec->is_pfns').  But this is just the first step, to verify
that this code really is all dead, and do so as quickly as possible.
Reported-by: Seth Jenkins <sethjenkins@google.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.1

 - fix SRCU protection of nvme_ns_head list (Caleb Sander)
 - clear the prp2 field when not used (Lei Rao)"

* tag 'nvme-6.1-2022-01-02' of git://git.infradead.org/nvme:
  nvme: fix SRCU protection of nvme_ns_head list
  nvme-pci: clear the prp2 field when not used

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the error path to avoid reference count leak.

Fixes: 2e455289 ("iommu/vt-d: Unify the way to process DMAR device scope array")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-3-wangxiongfeng2@huawei.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() before 'return true' to avoid reference count leak.

Fixes: 89a6079d ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-2-wangxiongfeng2@huawei.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

As comment of pci_get_domain_bus_and_slot() says, it returns a pci device
with refcount increment, when finish using it, the caller must decrease
the reference count by calling pci_dev_put(). So call pci_dev_put() after
using the 'pdev' to avoid refcount leak.

Besides, if the 'pdev' is null or intel_svm_prq_report() returns error,
there is no need to trace this fault.

Fixes: 06f4b8d0 ("iommu/vt-d: Remove unnecessary SVA data accesses in page fault path")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221119144028.2452731-1-yangyingliang@huawei.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

QAT devices on Intel Sapphire Rapids and Emerald Rapids have a defect in
address translation service (ATS). These devices may inadvertently issue
ATS invalidation completion before posted writes initiated with
translated address that utilized translations matching the invalidation
address range, violating the invalidation completion ordering.

This patch adds an extra device TLB invalidation for the affected devices,
it is needed to ensure no more posted writes with translated address
following the invalidation completion. Therefore, the ordering is
preserved and data-corruption is prevented.

Device TLBs are invalidated under the following six conditions:
1. Device driver does DMA API unmap IOVA
2. Device driver unbind a PASID from a process, sva_unbind_device()
3. PASID is torn down, after PASID cache is flushed. e.g. process
exit_mmap() due to crash
4. Under SVA usage, called by mmu_notifier.invalidate_range() where
VM has to free pages that were unmapped
5. userspace driver unmaps a DMA buffer
6. Cache invalidation in vSVA usage (upcoming)

For #1 and #2, device drivers are responsible for stopping DMA traffic
before unmap/unbind. For #3, iommu driver gets mmu_notifier to
invalidate TLB the same way as normal user unmap which will do an extra
invalidation. The dTLB invalidation after PASID cache flush does not
need an extra invalidation.

Therefore, we only need to deal with #4 and #5 in this patch. #1 is also
covered by this patch due to common code path with #5.
Tested-by: Yuzhang Luo <yuzhang.luo@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20221130062449.1360063-1-jacob.jun.pan@linux.intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Merge tag 'amd-drm-fixes-6.1-2022-12-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-12-01:

amdgpu:
- VCN fix for vangogh
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201202015.5931-1-alexander.deucher@amd.com

Recent changes to the DMA code has resulting in the IMX driver failing
I2C transfers when the buffer has been vmalloc. Only perform DMA
transfers if the message has the I2C_M_DMA_SAFE flag set, indicating
the client is providing a buffer which is DMA safe.

This is a minimal fix for stable. The I2C core provides helpers to
allocate a bounce buffer. For a fuller fix the master should make use
of these helpers.

Fixes: 4544b9f2 ("dma-mapping: Add vmap checks to dma_map_single()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Fix to return a negative error code from the gi2c->err instead of
0.

Fixes: d8703554 ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c
devices that have no pinctrl defined. There is no requirement for this
to exist in the DT. This has worked perfectly well without this before in
at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to
talk to a tda99xx phy). Adding the requirement to have pinctrl set up in
the device tree (or otherwise be found) is a regression where the whole
i2c device is lost entirely (in this case dropping entire devices which
then leads to the drm display stack unable to find the phy for display
output, thus having no drm display device and so on down the chain).

This converts the above commit to an enhancement if pinctrl can be found
for the i2c device, providing a timeout on read with recovery, but if not,
do what used to be done rather than a fatal loss of a device.

This restores the mentioned display devices to their working state again.

Fixes: 58b92424 ("i2c: cadence: Add standard bus recovery support")
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: added braces to else-branch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'drm-intel-fixes-2022-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix dram info readout (Radhakrishna Sripada)
- Remove non-existent pipes from bigjoiner pipe mask (Ville Syrjälä)
- Fix negative value passed as remaining time (Janusz Krzysztofik)
- Never return 0 if not all requests retired (Janusz Krzysztofik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y4hp+a3TJ13t2ZA1@tursulin-desk

The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled.  But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.

As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments.  But error injection should
be avoided.  Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".

This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.

Cc: stable@vger.kernel.org
Fixes: 540adea3 ("error-injection: Separate error-injection from kprobe")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

So that uses PSP to initialize HW.

Fixes: 0c2c02b6 ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This fixes a concrete bug but is also the basis for some cleanup work,
so I'm merging it based on the offending commit in order to minimize
future conflicts.

* commit '7e186433':
  riscv: fix race when vmap stack overflow

Pull EFI fix from Ard Biesheuvel:
 "A single revert for some code that I added during this cycle. The code
  is not wrong, but it should be a bit more careful about how to handle
  the shadow call stack pointer, so it is better to revert it for now
  and bring it back later in improved form.

  Summary:

   - Revert runtime service sync exception recovery on arm64"

* tag 'efi-fixes-for-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  arm64: efi: Revert "Recover from synchronous exceptions ..."

Merge tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix refcount leak and NULL pointer access in coretemp driver

 - Fix UAF in ibmpex driver

 - Add missing pci_disable_device() to i5500_temp driver

 - Fix calculation in ina3221 driver

 - Fix temperature scaling in ltc2947 driver

 - Check result of devm_kcalloc call in asus-ec-sensors driver

* tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus-ec-sensors) Add checks for devm_kcalloc
  hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()
  hwmon: (coretemp) Check for null before removing sysfs attrs
  hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails
  hwmon: (i5500_temp) fix missing pci_disable_device()
  hwmon: (ina3221) Fix shunt sum critical calculation
  hwmon: (ltc2947) fix temperature scaling

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: d0ddfd24 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.

Fixes: 14513ee6 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

If coretemp_add_core() gets an error then pdata->core_data[indx]
is already NULL and has been kfreed. Don't pass that to
sysfs_remove_group() as that will crash in sysfs_remove_group().

[Shortened for readability]
[91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label'
<cpu offline>
[91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188
[91855.165103] #PF: supervisor read access in kernel mode
[91855.194506] #PF: error_code(0x0000) - not-present page
[91855.224445] PGD 0 P4D 0
[91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI
...
[91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80
...
[91855.796571] Call Trace:
[91855.810524]  coretemp_cpu_offline+0x12b/0x1dd [coretemp]
[91855.841738]  ? coretemp_cpu_online+0x180/0x180 [coretemp]
[91855.871107]  cpuhp_invoke_callback+0x105/0x4b0
[91855.893432]  cpuhp_thread_fun+0x8e/0x150
...

Fix this by checking for NULL first.
Signed-off-by: Phil Auld <pauld@redhat.com>
Cc: linux-hwmon@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com
Fixes: 199e0de7 ("hwmon: (coretemp) Merge pkgtemp with coretemp")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This reverts commit 23715a26, which introduced some code in
assembler that manipulates both the ordinary and the shadow call stack
pointer in a way that could potentially be taken advantage of. So let's
revert it, and do a better job the next time around.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

After switching the voltage, no reset data and command will cause
CMD2 timeout.

Fixes: 29ca763f ("mmc: sdhci-sprd: Add pin control support for voltage switch")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221130121328.25553-1-wenchao.chen@unisoc.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull clk fixes from Stephen Boyd:
 "A set of clk driver fixes that resolve issues for various SoCs.

  Most of these are incorrect clk data, like bad parent descriptions.
  When the clk tree is improperly described things don't work, like USB
  and UFS controllers, because clk frequencies are wonky. Here are the
  extra details:

   - Fix the parent of UFS reference clks on Qualcomm SC8280XP so that
     UFS works properly

   - Fix the clk ID for USB on AT91 RM9200 so the USB driver continues
     to probe

   - Stop using of_device_get_match_data() on the wrong device for a
     Samsung Exynos driver so it gets the proper clk data

   - Fix ExynosAutov9 binding

   - Fix the parent of the div4 clk on Exynos7885

   - Stop calling runtime PM APIs from the Qualcomm GDSC driver directly
     as it leads to a lockdep splat and is just plain wrong because it
     violates runtime PM semantics by calling runtime PM APIs when the
     device has been runtime PM disabled"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks
  ARM: at91: rm9200: fix usb device clock id
  clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"
  dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1
  clk: qcom: gdsc: Remove direct runtime PM calls
  clk: samsung: exynos7885: Correct "div4" clock parents

It causes build failures with unusual CC/HOSTCC combinations.

Quoting
https://lkml.kernel.org/r/A222B1E6-69B8-4085-AD1B-27BDB72CA971@goldelico.com:

  HOSTCC  scripts/mod/modpost.o - due to target missing
In file included from include/linux/string.h:5,
                 from scripts/mod/../../include/linux/license.h:5,
                 from scripts/mod/modpost.c:24:
include/linux/compiler.h:246:10: fatal error: asm/rwonce.h: No such file or directory
  246 | #include <asm/rwonce.h>
      |          ^~~~~~~~~~~~~~
compilation terminated.

...

The problem is that HOSTCC is not necessarily the same compiler or even
architecture as CC and pulling in <linux/compiler.h> or <asm/rwonce.h>
files indirectly isn't a good idea then.

My toolchain is providing HOSTCC = gcc (MacPorts) and CC = arm-linux-gnueabihf
(built from gcc source) and all running on Darwin.

If I change the include to <string.h> I can then "HOSTCC scripts/mod/modpost.c"
but then it fails for "CC kernel/module/main.c" not finding <string.h>:

  CC      kernel/module/main.o - due to target missing
In file included from kernel/module/main.c:43:0:
./include/linux/license.h:5:20: fatal error: string.h: No such file or directory
 #include <string.h>
                    ^
compilation terminated.
Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Sam James <sam@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When enabled, KASAN enlarges function's stack-frames.  Pushing quite a few
over the current threshold.  This can mainly be seen on 32-bit
architectures where the present limit (when !GCC) is a lowly 1024-Bytes.

Link: https://lkml.kernel.org/r/20221125120750.3537134-3-lee@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Fix a bunch of allmodconfig errors", v2.

Since b339ec9c ("kbuild: Only default to -Werror if COMPILE_TEST")
WERROR now defaults to COMPILE_TEST meaning that it's enabled for
allmodconfig builds.  This leads to some interesting build failures when
using Clang, each resolved in this set.

With this set applied, I am able to obtain a successful allmodconfig Arm
build.


This patch (of 2):

calculate_bandwidth() is presently broken on all !(X86_64 || SPARC64 ||
ARM64) architectures built with Clang (all released versions), whereby the
stack frame gets blown up to well over 5k.  This would cause an immediate
kernel panic on most architectures.  We'll revert this when the following
bug report has been resolved:
https://github.com/llvm/llvm-project/issues/41896.

Link: https://lkml.kernel.org/r/20221125120750.3537134-1-lee@kernel.org
Link: https://lkml.kernel.org/r/20221125120750.3537134-2-lee@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Any codepath that zaps page table entries must invoke MMU notifiers to
ensure that secondary MMUs (like KVM) don't keep accessing pages which
aren't mapped anymore.  Secondary MMUs don't hold their own references to
pages that are mirrored over, so failing to notify them can lead to page
use-after-free.

I'm marking this as addressing an issue introduced in commit f3f0e1d2
("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of
the security impact of this only came in commit 27e1f827 ("khugepaged:
enable collapse pmd for pte-mapped THP"), which actually omitted flushes
for the removal of present PTEs, not just for the removal of empty page
tables.

Link: https://lkml.kernel.org/r/20221129154730.2274278-3-jannh@google.com
Link: https://lkml.kernel.org/r/20221128180252.1684965-3-jannh@google.com
Link: https://lkml.kernel.org/r/20221125213714.4115729-3-jannh@google.com
Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>