- 29 Mar, 2015 11 commits
-
-
David S. Miller authored
Ying Xue says: ==================== tipc: fix two corner issues The patch set aims at resolving the following two critical issues: Patch #1: Resolve a deadlock which happens while all links are reset Patch #2: Correct a mistake usage of RCU lock which is used to protect node list ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ying Xue authored
TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericson.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Ying Xue authored
[ 60.988363] ====================================================== [ 60.988754] [ INFO: possible circular locking dependency detected ] [ 60.989152] 3.19.0+ #194 Not tainted [ 60.989377] ------------------------------------------------------- [ 60.989781] swapper/3/0 is trying to acquire lock: [ 60.990079] (&(&n_ptr->lock)->rlock){+.-...}, at: [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.990743] [ 60.990743] but task is already holding lock: [ 60.991106] (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.991738] [ 60.991738] which lock already depends on the new lock. [ 60.991738] [ 60.992174] [ 60.992174] the existing dependency chain (in reverse order) is: [ 60.992174] -> #1 (&(&bclink->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] [<ffffffffa0000f57>] tipc_bclink_add_node+0x97/0xf0 [tipc] [ 60.992174] [<ffffffffa0011815>] tipc_node_link_up+0xf5/0x110 [tipc] [ 60.992174] [<ffffffffa0007783>] link_state_event+0x2b3/0x4f0 [tipc] [ 60.992174] [<ffffffffa00193c0>] tipc_link_proto_rcv+0x24c/0x418 [tipc] [ 60.992174] [<ffffffffa0008857>] tipc_rcv+0x827/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] -> #0 (&(&n_ptr->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a8f7d>] __lock_acquire+0x163d/0x1ca0 [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.992174] [<ffffffffa0001e11>] tipc_bclink_rcv+0x611/0x640 [tipc] [ 60.992174] [<ffffffffa0008646>] tipc_rcv+0x616/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] [ 60.992174] other info that might help us debug this: [ 60.992174] [ 60.992174] Possible unsafe locking scenario: [ 60.992174] [ 60.992174] CPU0 CPU1 [ 60.992174] ---- ---- [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] [ 60.992174] *** DEADLOCK *** [ 60.992174] [ 60.992174] 3 locks held by swapper/3/0: [ 60.992174] #0: (rcu_read_lock){......}, at: [<ffffffff81646791>] __netif_receive_skb_core+0x71/0x980 [ 60.992174] #1: (rcu_read_lock){......}, at: [<ffffffffa0002c35>] tipc_l2_rcv_msg+0x5/0xd0 [tipc] [ 60.992174] #2: (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] The correct the sequence of grabbing n_ptr->lock and bclink->lock should be that the former is first held and the latter is then taken, which exactly happened on CPU1. But especially when the retransmission of broadcast link is failed, bclink->lock is first held in tipc_bclink_rcv(), and n_ptr->lock is taken in link_retransmit_failure() called by tipc_link_retransmit() subsequently, which is demonstrated on CPU0. As a result, deadlock occurs. If the order of holding the two locks happening on CPU0 is reversed, the deadlock risk will be relieved. Therefore, the node lock taken in link_retransmit_failure() originally is moved to tipc_bclink_rcv() so that it's obtained before bclink lock. But the precondition of the adjustment of node lock is that responding to bclink reset event must be moved from tipc_bclink_unlock() to tipc_node_unlock(). Reviewed-by: -
Li RongQing authored
received is 0, no need to minus it and use "+=" to reassign it Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Hi David, this patch set includes 2 feature additions to the be2net driver: Patch 1 sets up cpu affinity hints for be2net irqs using the cpumask_set_cpu_local_first() API that first picks the near numa cores and when they are exhausted, selects the far numa cores. Patch 2 setups up xps queue mapping for be2net's TXQs to avoid, by default, TX lock contention. Patch 3 just bumps up the driver version. Pls consider applying this patch set to the net-next queue. Thanks! ==================== Signed-off-by: -
Sathya Perla authored
Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Sathya Perla authored
This patch sets up xps queue mapping on load, so that TX traffic is steered to the queue whose irqs are being processed by the current cpu. This helps in avoiding TX lock contention. Signed-off-by:
-
Padmanabh Ratnakar authored
This patch provides hints to irqbalance to map be2net IRQs to specific CPU cores. cpumask_set_cpu_local_first() is used, which first maps IRQs to near NUMA cores; when those cores are exhausted, IRQs are mapped to far NUMA cores. Signed-off-by:
Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by:
-
Eric Dumazet authored
After commit 1fb6f159 ("tcp: add tcp_conn_request"), tcp_syn_flood_action() is no longer used from IPv6. We can make it static, by moving it above tcp_conn_request() Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Octavian Purdila <octavian.purdila@intel.com> Signed-off-by:
-
Wu Fengguang authored
drivers/net/ethernet/chelsio/cxgb4/cxgb4_fcoe.c:49:9-10: WARNING: return of 0/1 in function 'cxgb_fcoe_sof_eof_supported' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci CC: Varun Prakash <varun@chelsio.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
WANG Cong authored
We should not commit the new ops until we finish all the setup, otherwise we have to NULL it on failure. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 27 Mar, 2015 12 commits
-
-
David S. Miller authored
Petri Gynther says: ==================== net: bcmgenet: multiple Rx queues support Final patch set to add support for multiple Rx queues: 1. remove priv->int0_mask and priv->int1_mask 2. modify Tx ring int_enable and int_disable vectors 3. simplify bcmgenet_init_dma() 4. tweak init_umac() 5. rework Tx NAPI code 6. rework Rx NAPI code 7. add support for multiple Rx queues ==================== Signed-off-by: -
Petri Gynther authored
Add support for multiple Rx queues: 1. Add NAPI context per Rx queue 2. Modify Rx interrupt and Rx NAPI code to handle multiple Rx queues Signed-off-by:
Petri Gynther <pgynther@google.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Petri Gynther authored
Introduce new bcmgenet functions to handle the NAPI calls to: netif_napi_add() napi_enable() napi_disable() netif_napi_del() Signed-off-by:
-
Petri Gynther authored
Introduce new bcmgenet functions to handle the NAPI calls to: netif_napi_add() napi_enable() napi_disable() netif_napi_del() Signed-off-by:
-
Petri Gynther authored
Use more meaningful variable names int0_enable and int1_enable when enabling bcmgenet interrupts. For Rx default queue interrupts, use: UMAC_IRQ_RXDMA_BDONE | UMAC_IRQ_RXDMA_PDONE For Tx default queue interrupts, use: UMAC_IRQ_TXDMA_BDONE | UMAC_IRQ_TXDMA_PDONE Signed-off-by:
-
Petri Gynther authored
Do the two kcalloc() calls first, before proceeding into Rx/Tx DMA init. Makes the error case handling much simpler. Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by:
-
Petri Gynther authored
Remove unnecessary function parameter priv. Use ring->priv instead. Signed-off-by:
-
Petri Gynther authored
Remove unused priv->int0_mask and priv->int1_mask. Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Add separate tx completion ring SGMII based 1GbE and 10GbE interfaces support multiple interrupts. Adding separate tx completion descriptor ring and associating a dedicated irq for the TX completion. ==================== Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Keyur Chudgar <kchudgar@apm.com>
-
Iyappan Subramanian authored
- Added wrapper functions around napi_add, napi_del, napi_enable and napi_disable - Moved platform_get_irq function call after reading phy_mode - Associating the new irq to tx completion for the supported ethernet interfaces Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
- 25 Mar, 2015 17 commits
-
-
Hannes Frederic Sowa authored
As namespaces are sometimes used with overlapping ip address ranges, we should also use the namespace as input to the hash to select the ip fragmentation counter bucket. Cc: Eric Dumazet <edumazet@google.com> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
As namespaces are sometimes used with overlapping ip address ranges, we should also use the namespace as input to the hash to select the ip fragmentation counter bucket. Cc: Eric Dumazet <edumazet@google.com> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: some improvements and fixes We introduce a better algorithm for selecting when and which users should be subject to link congestion control, plus clean up some code for that mechanism. Commit #3 fixes another rare race condition during packet reception. ==================== Signed-off-by: -
Jon Paul Maloy authored
Despite recent improvements, the establishment of dual parallel links still has a small glitch where messages can bypass each other. When the second link in a dual-link configuration is established, part of the first link's traffic will be steered over to the new link. Although we do have a mechanism to ensure that packets sent before and after the establishment of the new link arrive in sequence to the destination node, this is not enough. The arriving messages will still be delivered upwards in different threads, something entailing a risk of message disordering during the transition phase. To fix this, we introduce a synchronization mechanism between the two parallel links, so that traffic arriving on the new link cannot be added to its input queue until we are guaranteed that all pre-establishment messages have been delivered on the old, parallel link. This problem seems to always have been around, but its occurrence is so rare that it has not been noticed until recent intensive testing. Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
After the recent changes in message importance handling it becomes possible to simplify handling of messages and sockets when we encounter link congestion. We merge the function tipc_link_cong() into link_schedule_user(), and simplify the code of the latter. The code should now be easier to follow, especially regarding return codes and handling of the message that caused the situation. In case the scheduling function is unable to pre-allocate a wakeup message buffer, it now returns -ENOBUFS, which is a more correct code than the previously used -EHOSTUNREACH. Reviewed-by:
-
Jon Paul Maloy authored
Currently, we only use a single counter; the length of the backlog queue, to determine whether a message should be accepted to the queue or not. Each time a message is being sent, the queue length is compared to a threshold value for the message's importance priority. If the queue length is beyond this threshold, the message is rejected. This algorithm implies a risk of starvation of low importance senders during very high load, because it may take a long time before the backlog queue has decreased enough to accept a lower level message. We now eliminate this risk by introducing a counter for each importance priority. When a message is sent, we check only the queue level for that particular message's priority. If that is ok, the message can be added to the backlog, irrespective of the queue level for other priorities. This way, each level is guaranteed a certain portion of the total bandwidth, and any risk of starvation is eliminated. Reviewed-by:
-
Guenter Roeck authored
Master change notifications may occur other than when joining or leaving a bridge, for example when being added to or removed from a bond or Open vSwitch. In that case, do nothing instead of asking the switch driver to remove a port from a bridge that it didn't join. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
tadeusz.struk@intel.com authored
Change type from unsigned long to int to fix an issue reported by kbuild robot: crypto/algif_skcipher.c:596 skcipher_recvmsg_async() warn: unsigned 'used' is never less than zero. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Ying Xue authored
When a node joins a cluster while we are transmitting a fragment stream over the broadcast link, it's missing the preceding fragments needed to build a meaningful message. As a result, the node has to drop it. However, as the fragment message is not acknowledged to its sender before it's dropped, it accidentally causes link reset of retransmission failure on the node. Reported-by:
-
Sebastian Ott authored
The irqclass_sub_desc array and enum interruption_class are out of sync thus /proc/interrupts is broken. Remove IRQIO_CLW. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Ying Xue authored
Move the declaration for external variables to sctp.h file avoiding to repeatedly declare them with extern keyword. Signed-off-by:
-
Eric Dumazet authored
ss should display ipv4 mapped request sockets like this : tcp SYN-RECV 0 0 ::ffff:192.168.0.1:8080 ::ffff:192.0.2.1:35261 and not like this : tcp SYN-RECV 0 0 192.168.0.1:8080 192.0.2.1:35261 We should init ireq->ireq_family based on listener sk_family, not the actual protocol carried by SYN packet. This means we can set ireq_family in inet_reqsk_alloc() Fixes: 3f66b083 ("inet: introduce ireq_family") Signed-off-by:
-
stephen hemminger authored
The original comment was not really informative or funny as well as sexist. Replace it with a better explanation of why the driver does stop and what the impacts are. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Daniel Borkmann authored
We now have K_VLANT, K_VLANP and K_VLANTPID. Clean them up into more descriptive token, namely K_VLAN_TCI, K_VLAN_AVAIL and K_VLAN_TPID. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: listener refactor part 16 A CONFIG_PROVE_RCU=y build revealed an RCU splat I had to fix. I added const qualifiers to various md5 methods, as I expect to call them on behalf of request sock traffic even if the listener socket is not locked. This seems ok, but adding const makes the contract clearer. Note a good reduction of code size thanks to request/establish sockets convergence. ==================== Signed-off-by: -
Eric Dumazet authored
With request socks convergence, we no longer need different lookup methods. A request socket can use generic lookup function. Add const qualifier to 2nd tcp_v[46]_md5_lookup() parameter. Signed-off-by:
-
Eric Dumazet authored
Since request and established sockets now have same base, there is no need to pass two pointers to tcp_v4_md5_hash_skb() or tcp_v6_md5_hash_skb() Also add a const qualifier to their struct tcp_md5sig_key argument. Signed-off-by:
-
