- 11 Aug, 2017 40 commits
-
-
Chun-Hao Lin authored
[ Upstream commit 610c9087 ] This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by:
Chun-Hao Lin <hau@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
[ Upstream commit 0dad3a30 ] If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jarkko Sakkinen authored
commit 13b47cfc upstream. While cleaning up sysfs callback that prints EK we discovered a kernel memory leak. This commit fixes the issue by zeroing the buffer used for TPM command/response. The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or xen-tpmfront. Cc: stable@vger.kernel.org Fixes: 08837438 ("TPM: sysfs functions consolidation") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by:
Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Eric Dumazet authored
commit 6e7bc478 upstream. My recent change missed fact that UFO would perform a complete UDP checksum before segmenting in frags. In this case skb->ip_summed is set to CHECKSUM_NONE. We need to add this valid case to skb_needs_check() Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Kees Cook authored
commit e9a330c4 upstream. The per-prz spinlock should be using the dynamic initializer so that lockdep can correctly track it. Without this, under lockdep, we get a warning at boot that the lock is in non-static memory. Fixes: 10970449 ("pstore: Make spinlock per zone instead of global") Fixes: 76d5692a ("pstore: Correctly initialize spinlock and flags") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
commit 76d5692a upstream. The ram backend wasn't always initializing its spinlock correctly. Since it was coming from kzalloc memory, though, it was harmless on architectures that initialize unlocked spinlocks to 0 (at least x86 and ARM). This also fixes a possibly ignored flag setting too. When running under CONFIG_DEBUG_SPINLOCK, the following Oops was visible: [ 0.760836] persistent_ram: found existing buffer, size 29988, start 29988 [ 0.765112] persistent_ram: found existing buffer, size 30105, start 30105 [ 0.769435] persistent_ram: found existing buffer, size 118542, start 118542 [ 0.785960] persistent_ram: found existing buffer, size 0, start 0 [ 0.786098] persistent_ram: found existing buffer, size 0, start 0 [ 0.786131] pstore: using zlib compression [ 0.790716] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 0.790729] lock: 0xffffffc0d1ca9bb0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 0.790742] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-rc2+ #913 [ 0.790747] Hardware name: Google Kevin (DT) [ 0.790750] Call trace: [ 0.790768] [<ffffff900808ae88>] dump_backtrace+0x0/0x2bc [ 0.790780] [<ffffff900808b164>] show_stack+0x20/0x28 [ 0.790794] [<ffffff9008460ee0>] dump_stack+0xa4/0xcc [ 0.790809] [<ffffff9008113cfc>] spin_dump+0xe0/0xf0 [ 0.790821] [<ffffff9008113d3c>] spin_bug+0x30/0x3c [ 0.790834] [<ffffff9008113e28>] do_raw_spin_lock+0x50/0x1b8 [ 0.790846] [<ffffff9008a2d2ec>] _raw_spin_lock_irqsave+0x54/0x6c [ 0.790862] [<ffffff90083ac3b4>] buffer_size_add+0x48/0xcc [ 0.790875] [<ffffff90083acb34>] persistent_ram_write+0x60/0x11c [ 0.790888] [<ffffff90083aab1c>] ramoops_pstore_write_buf+0xd4/0x2a4 [ 0.790900] [<ffffff90083a9d3c>] pstore_console_write+0xf0/0x134 [ 0.790912] [<ffffff900811c304>] console_unlock+0x48c/0x5e8 [ 0.790923] [<ffffff900811da18>] register_console+0x3b0/0x4d4 [ 0.790935] [<ffffff90083aa7d0>] pstore_register+0x1a8/0x234 [ 0.790947] [<ffffff90083ac250>] ramoops_probe+0x6b8/0x7d4 [ 0.790961] [<ffffff90085ca548>] platform_drv_probe+0x7c/0xd0 [ 0.790972] [<ffffff90085c76ac>] driver_probe_device+0x1b4/0x3bc [ 0.790982] [<ffffff90085c7ac8>] __device_attach_driver+0xc8/0xf4 [ 0.790996] [<ffffff90085c4bfc>] bus_for_each_drv+0xb4/0xe4 [ 0.791006] [<ffffff90085c7414>] __device_attach+0xd0/0x158 [ 0.791016] [<ffffff90085c7b18>] device_initial_probe+0x24/0x30 [ 0.791026] [<ffffff90085c648c>] bus_probe_device+0x50/0xe4 [ 0.791038] [<ffffff90085c35b8>] device_add+0x3a4/0x76c [ 0.791051] [<ffffff90087d0e84>] of_device_add+0x74/0x84 [ 0.791062] [<ffffff90087d19b8>] of_platform_device_create_pdata+0xc0/0x100 [ 0.791073] [<ffffff90087d1a2c>] of_platform_device_create+0x34/0x40 [ 0.791086] [<ffffff900903c910>] of_platform_default_populate_init+0x58/0x78 [ 0.791097] [<ffffff90080831fc>] do_one_initcall+0x88/0x160 [ 0.791109] [<ffffff90090010ac>] kernel_init_freeable+0x264/0x31c [ 0.791123] [<ffffff9008a25bd0>] kernel_init+0x18/0x11c [ 0.791133] [<ffffff9008082ec0>] ret_from_fork+0x10/0x50 [ 0.793717] console [pstore-1] enabled [ 0.797845] pstore: Registered ramoops as persistent store backend [ 0.804647] ramoops: attached 0x100000@0xf7edc000, ecc: 0/0 Fixes: 663deb47 ("pstore: Allow prz to control need for locking") Fixes: 10970449 ("pstore: Make spinlock per zone instead of global") Reported-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Joel Fernandes authored
commit 663deb47 upstream. In preparation of not locking at all for certain buffers depending on if there's contention, make locking optional depending on the initialization of the prz. Signed-off-by:
Joel Fernandes <joelaf@google.com> [kees: moved locking flag into prz instead of via caller arguments] Signed-off-by:
-
Andrzej Hajda authored
commit a2370ba2 upstream. Bool values should be negated using logical operators. Using bitwise operators results in unexpected and possibly incorrect results. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Al Viro authored
commit 49d31c2f upstream. take_dentry_name_snapshot() takes a safe snapshot of dentry name; if the name is a short one, it gets copied into caller-supplied structure, otherwise an extra reference to external name is grabbed (those are never modified). In either case the pointer to stable string is stored into the same structure. dentry must be held by the caller of take_dentry_name_snapshot(), but may be freely dropped afterwards - the snapshot will stay until destroyed by release_dentry_name_snapshot(). Intended use: struct name_snapshot s; take_dentry_name_snapshot(&s, dentry); ... access s.name ... release_dentry_name_snapshot(&s); Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name to pass down with event. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Vidic authored
commit 860f01e9 upstream. systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Daniel Borkmann authored
commit 628185cf upstream. Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by:
Shahar Klein <shahark@mellanox.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Ben Hutchings authored
commit 4f9dce23 upstream. The driver connects and disconnects the PHY device whenever the net device is brought up and down. The ethtool get_settings, set_settings and nway_reset operations will dereference a null or dangling pointer if called while it is down. I think it would be preferable to keep the PHY connected, but there may be good reasons not to. As an immediate fix for this bug: - Set the phydev pointer to NULL after disconnecting the PHY - Change those three operations to return -ENODEV while the PHY is not connected Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Daniel Borkmann authored
commit 2061dcd6 upstream. I.e. one-to-many sockets in SCTP are not required to explicitly call into connect(2) or sctp_connectx(2) prior to data exchange. Instead, they can directly invoke sendmsg(2) and the SCTP stack will automatically trigger connection establishment through 4WHS via sctp_primitive_ASSOCIATE(). However, this in its current implementation is racy: INIT is being sent out immediately (as it cannot be bundled anyway) and the rest of the DATA chunks are queued up for later xmit when connection is established, meaning sendmsg(2) will return successfully. This behaviour can result in an undesired side-effect that the kernel made the application think the data has already been transmitted, although none of it has actually left the machine, worst case even after close(2)'ing the socket. Instead, when the association from client side has been shut down e.g. first gracefully through SCTP_EOF and then close(2), the client could afterwards still receive the server's INIT_ACK due to a connection with higher latency. This INIT_ACK is then considered out of the blue and hence responded with ABORT as there was no alive assoc found anymore. This can be easily reproduced f.e. with sctp_test application from lksctp. One way to fix this race is to wait for the handshake to actually complete. The fix defers waiting after sctp_primitive_ASSOCIATE() and sctp_primitive_SEND() succeeded, so that DATA chunks cooked up from sctp_sendmsg() have already been placed into the output queue through the side-effect interpreter, and therefore can then be bundeled together with COOKIE_ECHO control chunks. strace from example application (shortened): socket(PF_INET, SOCK_SEQPACKET, IPPROTO_SCTP) = 3 sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")}, msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5 sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")}, msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5 sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")}, msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5 sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")}, msg_iov(1)=[{"hello", 5}], msg_controllen=0, msg_flags=0}, 0) = 5 sendmsg(3, {msg_name(28)={sa_family=AF_INET, sin_port=htons(8888), sin_addr=inet_addr("192.168.1.115")}, msg_iov(0)=[], msg_controllen=48, {cmsg_len=48, cmsg_level=0x84 /* SOL_??? */, cmsg_type=, ...}, msg_flags=0}, 0) = 0 // graceful shutdown for SOCK_SEQPACKET via SCTP_EOF close(3) = 0 tcpdump before patch (fooling the application): 22:33:36.306142 IP 192.168.1.114.41462 > 192.168.1.115.8888: sctp (1) [INIT] [init tag: 3879023686] [rwnd: 106496] [OS: 10] [MIS: 65535] [init TSN: 3139201684] 22:33:36.316619 IP 192.168.1.115.8888 > 192.168.1.114.41462: sctp (1) [INIT ACK] [init tag: 3345394793] [rwnd: 106496] [OS: 10] [MIS: 10] [init TSN: 3380109591] 22:33:36.317600 IP 192.168.1.114.41462 > 192.168.1.115.8888: sctp (1) [ABORT] tcpdump after patch: 14:28:58.884116 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [INIT] [init tag: 438593213] [rwnd: 106496] [OS: 10] [MIS: 65535] [init TSN: 3092969729] 14:28:58.888414 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [INIT ACK] [init tag: 381429855] [rwnd: 106496] [OS: 10] [MIS: 10] [init TSN: 2141904492] 14:28:58.888638 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [COOKIE ECHO] , (2) [DATA] (B)(E) [TSN: 3092969729] [...] 14:28:58.893278 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [COOKIE ACK] , (2) [SACK] [cum ack 3092969729] [a_rwnd 106491] [#gap acks 0] [#dup tsns 0] 14:28:58.893591 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [DATA] (B)(E) [TSN: 3092969730] [...] 14:28:59.096963 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [SACK] [cum ack 3092969730] [a_rwnd 106496] [#gap acks 0] [#dup tsns 0] 14:28:59.097086 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [DATA] (B)(E) [TSN: 3092969731] [...] , (2) [DATA] (B)(E) [TSN: 3092969732] [...] 14:28:59.103218 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [SACK] [cum ack 3092969732] [a_rwnd 106486] [#gap acks 0] [#dup tsns 0] 14:28:59.103330 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [SHUTDOWN] 14:28:59.107793 IP 192.168.1.115.8888 > 192.168.1.114.35846: sctp (1) [SHUTDOWN ACK] 14:28:59.107890 IP 192.168.1.114.35846 > 192.168.1.115.8888: sctp (1) [SHUTDOWN COMPLETE] Looks like this bug is from the pre-git history museum. ;) Fixes: 08707d54 ("lksctp-2_5_31-0_5_1.patch") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Jan Stancek authored
commit 4762fb98 upstream. Use spin_lock_bh in ip6_fl_purge() to prevent following potentially deadlock scenario between ip6_fl_purge() and ip6_fl_gc() timer. ================================= [ INFO: inconsistent lock state ] 3.19.0 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/5/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ip6_fl_lock){+.?...}, at: [<ffffffff8171155d>] ip6_fl_gc+0x2d/0x180 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810ee9a0>] __lock_acquire+0x4a0/0x10b0 [<ffffffff810efd54>] lock_acquire+0xc4/0x2b0 [<ffffffff81751d2d>] _raw_spin_lock+0x3d/0x80 [<ffffffff81711798>] ip6_flowlabel_net_exit+0x28/0x110 [<ffffffff815f9759>] ops_exit_list.isra.1+0x39/0x60 [<ffffffff815fa320>] cleanup_net+0x100/0x1e0 [<ffffffff810ad80a>] process_one_work+0x20a/0x830 [<ffffffff810adf4b>] worker_thread+0x11b/0x460 [<ffffffff810b42f4>] kthread+0x104/0x120 [<ffffffff81752bfc>] ret_from_fork+0x7c/0xb0 irq event stamp: 84640 hardirqs last enabled at (84640): [<ffffffff81752080>] _raw_spin_unlock_irq+0x30/0x50 hardirqs last disabled at (84639): [<ffffffff81751eff>] _raw_spin_lock_irq+0x1f/0x80 softirqs last enabled at (84628): [<ffffffff81091ad1>] _local_bh_enable+0x21/0x50 softirqs last disabled at (84629): [<ffffffff81093b7d>] irq_exit+0x12d/0x150 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(ip6_fl_lock); <Interrupt> lock(ip6_fl_lock); *** DEADLOCK *** Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
-
Oliver Neukum authored
commit 575ced7f upstream. Just return an error upon failure. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
commit 60bcabd0 upstream. This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by:
-
Calvin Owens authored
commit 5ec8a175 upstream. In _base_make_ioc_operational(), we walk ioc->reply_queue_list and pull a pointer out of successive elements of ioc->reply_post[] for each entry in that list if RDPQ is enabled. Since the code pulls the pointer for the next iteration at the bottom of the loop, it triggers the a KASAN dump on the final iteration: BUG: KASAN: slab-out-of-bounds in _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] at addr ffff880754816ab0 Read of size 8 by task modprobe/305 <snip> Call Trace: [<ffffffff81dfc591>] dump_stack+0x4d/0x6c [<ffffffff814c9689>] print_trailer+0xf9/0x150 [<ffffffff814ceda4>] object_err+0x34/0x40 [<ffffffff814d1231>] kasan_report_error+0x221/0x530 [<ffffffff814d1673>] __asan_report_load8_noabort+0x43/0x50 [<ffffffffa0043637>] _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] [<ffffffffa0049a51>] mpt3sas_base_attach+0x1991/0x2120 [mpt3sas] [<ffffffffa0053c93>] _scsih_probe+0xeb3/0x16b0 [mpt3sas] [<ffffffff81ebd047>] local_pci_probe+0xc7/0x170 [<ffffffff81ebf2cf>] pci_device_probe+0x20f/0x290 [<ffffffff820d50cd>] really_probe+0x17d/0x600 [<ffffffff820d56a3>] __driver_attach+0x153/0x190 [<ffffffff820cffac>] bus_for_each_dev+0x11c/0x1a0 [<ffffffff820d421d>] driver_attach+0x3d/0x50 [<ffffffff820d378a>] bus_add_driver+0x44a/0x5f0 [<ffffffff820d666c>] driver_register+0x18c/0x3b0 [<ffffffff81ebcb76>] __pci_register_driver+0x156/0x200 [<ffffffffa00c8135>] _mpt3sas_init+0x135/0x1000 [mpt3sas] [<ffffffff81000423>] do_one_initcall+0x113/0x2b0 [<ffffffff813caa5a>] do_init_module+0x1d0/0x4d8 [<ffffffff81273909>] load_module+0x6729/0x8dc0 [<ffffffff81276123>] SYSC_init_module+0x183/0x1a0 [<ffffffff8127625e>] SyS_init_module+0xe/0x10 [<ffffffff828fe7d7>] entry_SYSCALL_64_fastpath+0x12/0x6a Fix this by pulling the value at the beginning of the loop. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jens Axboe <axboe@fb.com> Acked-by:
Chaitra Basappa <chaitra.basappa@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Sudeep Holla authored
commit cb710ab1 upstream. We already check if the message is empty before calling the client tx_done callback. Calling completion on a wait event is also invalid if the message is empty. This patch moves the existing empty message check earlier. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Sudeep Holla authored
commit cc6eeaa3 upstream. If a wait_for_completion_timeout() call returns due to a timeout, complete() can get called after returning from the wait which is incorrect and can cause subsequent transmissions on a channel to fail. Since the wait_for_completion_timeout() sees the completion variable is non-zero caused by the erroneous/spurious complete() call, and it immediately returns without waiting for the time as expected by the client. This patch fixes the issue by skipping complete() call for the timer expiry. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Reported-by:
Alexey Klimov <alexey.klimov@arm.com> Signed-off-by:
-
Sudeep Holla authored
commit c61b781e upstream. There exists a race when msg_submit return immediately as there was an active request being processed which may have completed just before it's checked again in mbox_send_message. This will result in return to the caller without waiting in mbox_send_message even when it's blocking Tx. This patch fixes the issue by waiting for the completion always if Tx is in blocking mode. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Reported-by:
-
Lior David authored
commit dfb5b098 upstream. When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by:
Lior David <qca_liord@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Annie Cherkaev authored
commit 9f5af546 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by:
Jiten Thakkar <jitenmt@gmail.com> Signed-off-by:
Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Chris Metcalf authored
commit 990486c8 upstream. It's possible that the destination can be shadowed in userspace (as, for example, the perf buffers are now). So we should take care not to leak data that could be inspected by userspace. Signed-off-by:
Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by:
-
Chris Metcalf authored
commit 30035e45 upstream. The strscpy() API is intended to be used instead of strlcpy(), and instead of most uses of strncpy(). - Unlike strlcpy(), it doesn't read from memory beyond (src + size). - Unlike strlcpy() or strncpy(), the API provides an easy way to check for destination buffer overflow: an -E2BIG error return value. - The provided implementation is robust in the face of the source buffer being asynchronously changed during the copy, unlike the current implementation of strlcpy(). - Unlike strncpy(), the destination buffer will be NUL-terminated if the string in the source buffer is too long. - Also unlike strncpy(), the destination buffer will not be updated beyond the NUL termination, avoiding strncpy's behavior of zeroing the entire tail end of the destination buffer. (A memset() after the strscpy() can be used if this behavior is desired.) - The implementation should be reasonably performant on all platforms since it uses the asm/word-at-a-time.h API rather than simple byte copy. Kernel-to-kernel string copy is not considered to be performance critical in any case. Signed-off-by:
-
Jia-Ju Bai authored
commit e8f4ae85 upstream. The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Florian Fainelli authored
commit 0878fff1 upstream. The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by:
Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Al Viro authored
commit 96c26653 upstream. ... rather than relying on ciptool(8) never passing it anything else. Give it e.g. an AF_UNIX connected socket (from socketpair(2)) and it'll oops, trying to evaluate &l2cap_pi(sock->sk)->chan->dst... Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hedberg authored
commit 88d9077c upstream. The bnep_get_device function may be triggered by an ioctl just after a connection has gone down. In such a case the respective L2CAP chan->conn pointer will get set to NULL (by l2cap_chan_del). This patch adds a missing NULL check for this case in the bnep_get_device() function. Reported-by:
Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Al Viro authored
commit 71bb99a0 upstream. same story as cmtp Signed-off-by:
-
Cheah Kok Cheong authored
commit bf279ece upstream. Move comedi_proc_init to the end to avoid orphaned proc entry if module loading failed. Signed-off-by:
Cheah Kok Cheong <thrust73@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 138bb148 which is commit ba4a648f upstream. Michal Hocko writes: JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/20170724134240.GL25221@dhcp22.suse.cz It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here. We have reverted this patch from our 4.4 based kernel. Newer kernels do not have enlarged vmalloc space yet AFAIK so they won't work properly eiter. This bug is quite rare though because you need a specific HW configuration to trigger the issue - namely NUMA nodes have to be far away from each other in the physical memory space. Cc: Michal Hocko <mhocko@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Paul Mackerras authored
commit 7ceaa6dc upstream. At present, HV KVM on POWER8 and POWER9 machines loses any instruction or data breakpoint set in the host whenever a guest is run. Instruction breakpoints are currently only used by xmon, but ptrace and the perf_event subsystem can set data breakpoints as well as xmon. To fix this, we save the host values of the debug registers (CIABR, DAWR and DAWRX) before entering the guest and restore them on exit. To provide space to save them in the stack frame, we expand the stack frame allocated by kvmppc_hv_entry() from 112 to 144 bytes. [paulus@ozlabs.org - Adjusted stack offsets since we aren't saving POWER9-specific registers.] Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
Commit 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly", 2017-06-15) added code which assumes that the kernel is able to handle a TM (transactional memory) unavailable interrupt from userspace by reloading the TM-related registers and enabling TM for the process. That ability was added in the 4.9 kernel; earlier kernel versions simply panic on getting the TM unavailable interrupt. Since commit 46a704f8 has been backported to the 3.18 stable tree as commit 0b423dab, 3.18.59 and subsequent versions are vulnerable to a userspace-triggerable panic. This patch fixes the problem by explicitly reloading the TM-related registers before returning to userspace, rather than disabling TM for the process. Commit 46a704f8 also failed to enable TM for the kernel, leading to a TM unavailable interrupt in the kernel, causing an oops. This fixes that problem too, by enabling TM before accessing the TM registers. That problem is fixed upstream by the patch "KVM: PPC: Book3S HV: Enable TM before accessing TM registers". Fixes: 0b423dab ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly") Signed-off-by:
-
Paul Mackerras authored
commit 4c3bb4cc upstream. This restores several special-purpose registers (SPRs) to sane values on guest exit that were missed before. TAR and VRSAVE are readable and writable by userspace, and we need to save and restore them to prevent the guest from potentially affecting userspace execution (not that TAR or VRSAVE are used by any known program that run uses the KVM_RUN ioctl). We save/restore these in kvmppc_vcpu_run_hv() rather than on every guest entry/exit. FSCR affects userspace execution in that it can prohibit access to certain facilities by userspace. We restore it to the normal value for the task on exit from the KVM_RUN ioctl. IAMR is normally 0, and is restored to 0 on guest exit. However, with a radix host on POWER9, it is set to a value that prevents the kernel from executing user-accessible memory. On POWER9, we save IAMR on guest entry and restore it on guest exit to the saved value rather than 0. On POWER8 we continue to set it to 0 on guest exit. PSPB is normally 0. We restore it to 0 on guest exit to prevent userspace taking advantage of the guest having set it non-zero (which would allow userspace to set its SMT priority to high). UAMOR is normally 0. We restore it to 0 on guest exit to prevent the AMR from being used as a covert channel between userspace processes, since the AMR is not context-switched at present. [paulus@ozlabs.org - removed IAMR bits that are only needed on POWER9; adjusted FSCR save/restore for lack of fscr field in thread_struct.] Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by:
-
Sinclair Yeh authored
commit fcfffdd8 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Ofer Heifetz authored
commit 7e96d559 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Laurent Vivier authored
commit 4fd1bd44 upstream. As for commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"), the call to of_node_put() must be removed from pSeries_reconfig_remove_node(). dlpar_detach_node() and pSeries_reconfig_remove_node() both call of_detach_node(), and thus the node should not be released in both cases. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Eric Dumazet authored
commit b2504a5d upstream. Dmitry reported warnings occurring in __skb_gso_segment() [1] All SKB_GSO_DODGY producers can allow user space to feed packets that trigger the current check. We could prevent them from doing so, rejecting packets, but this might add regressions to existing programs. It turns out our SKB_GSO_DODGY handlers properly set up checksum information that is needed anyway when packets needs to be segmented. By checking again skb_needs_check() after skb_mac_gso_segment(), we should remove these pesky warnings, at a very minor cost. With help from Willem de Bruijn [1] WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20 Call Trace: [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline] [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline] [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline] [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline] [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Joel Fernandes authored
commit 10970449 upstream. Currently pstore has a global spinlock for all zones. Since the zones are independent and modify different areas of memory, there's no need to have a global lock, so we should use a per-zone lock as introduced here. Also, when ramoops's ftrace use-case has a FTRACE_PER_CPU flag introduced later, which splits the ftrace memory area into a single zone per CPU, it will eliminate the need for locking. In preparation for this, make the locking optional. Signed-off-by:
-
Yuejie Shi authored
commit 89e357d8 upstream. A dump may come in the middle of another dump, modifying its dump structure members. This race condition will result in NULL pointer dereference in kernel. So add a lock to prevent that race. Fixes: 83321d6b ("[AF_KEY]: Dump SA/SP entries non-atomically") Signed-off-by:
Yuejie Shi <syjcnss@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
