- 09 Jun, 2014 40 commits
-
-
Mizuma, Masayoshi authored
commit 7848a4bf upstream. soft lockup in freeing gigantic hugepage fixed in commit 55f67141 "mm: hugetlb: fix softlockup when a large number of hugepages are freed." can happen in return_unused_surplus_pages(), so let's fix it. Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Peter Foley authored
commit 82c04ff8 upstream. The SYSTEM_TRUSTED_KEYRING config option is not in any menu, causing it to show up in the toplevel of the kernel configuration. Fix this by moving it under the General Setup menu. Signed-off-by:
Peter Foley <pefoley2@pefoley.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit bcddee29 upstream. Avoid a possible segfault. Noticed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 8c79bae6 upstream. Avoid a possible segfault. Noticed-by:
-
Quentin Casasnovas authored
commit 74073c9d upstream. On bo reservation failure, we end up leaking fpriv. v2 (chk): rebased and added missing free on vm failure as well Fixes: 5e386b57 ("drm/radeon: fix missing bo reservation") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by:
Christian König <christian.koenig@amd.com> [ kamal: backport to 3.13-stable: omit radeon_vm_init() return check ] Signed-off-by:
-
Alex Deucher authored
commit 7e1858f9 upstream. If the new mc ucode is available. Signed-off-by:
-
Alex Deucher authored
commit 277babc3 upstream. Fixes mclk stability on certain asics. v2: print out mc firmware version used and size bug: https://bugs.freedesktop.org/show_bug.cgi?id=75992Signed-off-by:
-
Alex Deucher authored
commit 1ebe9280 upstream. May fix stability issues with some newer cards. v2: print out mc firmware version used and size Signed-off-by:
-
Alex Deucher authored
commit 90c4cde9 upstream. Don't try and runtime suspend the APU in PX systems. We only want to power down the dGPU. v2: fix harder v3: fix stupid typo v4: consolidate runpm enablement to a single flag bugs: https://bugs.freedesktop.org/show_bug.cgi?id=75127 https://bugzilla.kernel.org/show_bug.cgi?id=72701Signed-off-by:
-
Alex Deucher authored
commit 57700ad1 upstream. Setting higher mclks seems to cause stability issues on some R7 260X boards. Disable it for now for stability until we find a proper fix. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75992Signed-off-by:
-
Tony Lindgren authored
commit d758c9c1 upstream. The lack of pm_runtime_resume handling for the device state leads into device wake-up interrupts not working after a while for runtime PM. Also, serial-omap is confused about the use of device_may_wakeup. The checks for device_may_wakeup should only be done for suspend and resume, not for pm_runtime_suspend and pm_runtime_resume. The wake-up events for PM runtime should always be enabled. The lack of pm_runtime_resume handling leads into device wake-up interrupts not working after a while for runtime PM. Rather than try to patch over the issue of adding complex tests to the pm_runtime_resume, let's fix the issues properly: 1. Make serial_omap_enable_wakeup deal with all internal PM state handling so we don't need to test for up->wakeups_enabled elsewhere. Later on once omap3 boots in device tree only mode we can also remove the up->wakeups_enabled flag and rely on the wake-up interrupt enable/disable state alone. 2. Do the device_may_wakeup checks in suspend and resume only, for runtime PM the wake-up events need to be always enabled. 3. Finally just call serial_omap_enable_wakeup and make sure we call it also in pm_runtime_resume. 4. Note that we also have to use disable_irq_nosync as serial_omap_irq calls pm_runtime_get_sync. Fixes: 2a0b965c (serial: omap: Add support for optional wake-up) Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
K. Y. Srinivasan authored
commit 03367ef5 upstream. Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the VMBUS protocol. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Michael Ulbricht authored
commit 895d240d upstream. By specifying NO_UNION_NORMAL the ACM driver does only use the first two USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA interfaces are left to the USB serial driver. Signed-off-by:
Michael Ulbricht <michael.ulbricht@systec-electronic.com> Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Alan Stern authored
commit a2ff864b upstream. The code in hcd-pci.c that matches up EHCI controllers with their companion UHCI or OHCI controllers assumes that the private drvdata fields don't get set too early. However, it turns out that this field gets set by usb_create_hcd(), before hcd-pci expects it, and this can result in a crash when two controllers are probed in parallel (as can happen when a new controller card is hotplugged). The companions_rwsem lock was supposed to prevent this sort of thing, but usb_create_hcd() is called outside the scope of the rwsem. A simple solution is to check that the root-hub pointer has been initialized as well as the drvdata field. This doesn't happen until usb_add_hcd() is called; that call and the check are both protected by the rwsem. This patch should be applied to stable kernels from 3.10 onward. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Stefani Seibold <stefani@seibold.net> Tested-by:
-
Johan Hovold authored
commit bd73bd88 upstream. Fix regression introduced by commit 8e493ca1 ("USB: usb_wwan: fix bulk-urb allocation") by making sure to require both bulk-in and out endpoints during port probe. The original option driver (which usb_wwan is based on) was written under the assumption that either endpoint could be missing, but evidently this cannot have been tested properly. Specifically, it would handle opening a device without bulk-in (but would blow up during resume which was implemented later), but not a missing bulk-out in write() (although it is handled in some places such as write_room()). Fortunately (?), the driver also got the test for missing endpoints wrong so the urbs were in fact always allocated, although they would be initialised using the wrong endpoint address (0) and any submission of such an urb would fail. The commit mentioned above fixed the test for missing endpoints but thereby exposed the other bugs which would now generate null-pointer exceptions rather than failed urb submissions. The regression was introduced in v3.7, but the offending commit was also marked for stable. Reported-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Tested-by:
-
Aaron Sanders authored
commit b16c02fb upstream. Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays: LD960: 03f0:0B39 LCM220: 03f0:3139 LCM960: 03f0:3239 [ Johan: fix indentation and sort PIDs numerically ] Signed-off-by:
Aaron Sanders <aaron.sanders@hp.com> Signed-off-by:
-
Tristan Bruns authored
commit 72b30079 upstream. Signed-off-by:
Tristan Bruns <tristan@tristanbruns.de> Signed-off-by:
-
Daniele Palmas authored
commit d6de486b upstream. option driver, added VID/PID for Telit UE910v2 modem Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 2e01280d upstream. This reverts commit 1ebca9da. This device was erroneously added to the sierra driver even though it's not a Sierra device and was already handled by the option driver. Cc: Richard Farina <sidhayn@gmail.com> Signed-off-by:
-
Michele Baldessari authored
commit efe26e16 upstream. Custom VID/PIDs for Brainboxes cards as reported in https://bugzilla.redhat.com/show_bug.cgi?id=1071914Signed-off-by:
Michele Baldessari <michele@acksyn.org> Signed-off-by:
-
Larry Finger authored
commit 33c84bc1 upstream. Zero-initializing ether_type masked that the ether type would never be obtained for 8021x packets and the comparison against eapol_type would always fail. Reported-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit f764cd68 upstream. Zero-initializing ether_type masked that the ether type would never be obtained for 8021x packets and the comparison against eapol_type would always fail. Reported-by:
-
Alexander Usyskin authored
commit 34ec4366 upstream. Ignore client writing state during cb completion to fix a memory leak. When moving cbs to the completion list we should not look at writing_state as this state can be already overwritten by next write, the fact that a cb is on the write waiting list means that it was already written to the HW and we can safely complete it. Same pays for wait in poll handler, we do not have to check the state wake is done after completion list processing. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
commit 5e6533a6 upstream. NM and SPS FW types that may run on ME device on server platforms do not have valid MEI/HECI interface and driver should not be bound to it as this might lead to system hung. In practice not all BIOSes effectively hide such devices from the OS and in some cases it is not possible. We determine FW type by examining Host FW status registers in order to unbind the driver. In this patch we are adding check for ME on Cougar Point, Lynx Point Devices Signed-off-by:
Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by:
-
Chris Mason authored
commit c98235cb upstream. The mlx4 driver is triggering schedules while atomic inside mlx4_en_netpoll: spin_lock_irqsave(&cq->lock, flags); napi_synchronize(&cq->napi); ^^^^^ msleep here mlx4_en_process_rx_cq(dev, cq, 0); spin_unlock_irqrestore(&cq->lock, flags); This was part of a patch by Alexander Guller from Mellanox in 2011, but it still isn't upstream. Signed-off-by:
Chris Mason <clm@fb.com> Acked-By:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sachin Prabhu authored
commit c11f1df5 upstream. Problem reported in Red Hat bz 1040329 for strict writes where we cache only when we hold oplock and write direct to the server when we don't. When we receive an oplock break, we first change the oplock value for the inode in cifsInodeInfo->oplock to indicate that we no longer hold the oplock before we enqueue a task to flush changes to the backing device. Once we have completed flushing the changes, we return the oplock to the server. There are 2 ways here where we can have data corruption 1) While we flush changes to the backing device as part of the oplock break, we can have processes write to the file. These writes check for the oplock, find none and attempt to write directly to the server. These direct writes made while we are flushing from cache could be overwritten by data being flushed from the cache causing data corruption. 2) While a thread runs in cifs_strict_writev, the machine could receive and process an oplock break after the thread has checked the oplock and found that it allows us to cache and before we have made changes to the cache. In that case, we end up with a dirty page in cache when we shouldn't have any. This will be flushed later and will overwrite all subsequent writes to the part of the file represented by this page. Before making any writes to the server, we need to confirm that we are not in the process of flushing data to the server and if we are, we should wait until the process is complete before we attempt the write. We should also wait for existing writes to complete before we process an oplock break request which changes oplock values. We add a version specific downgrade_oplock() operation to allow for differences in the oplock values set for the different smb versions. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 9452bf56 upstream. This makes the follow-on check for psta != NULL pointless and makes the whole exercise rather pointless. This is another case of why blindly zero-initializing variables when they are declared is bad. Reported-by:
-
Kailang Yang authored
commit 8dc9abb9 upstream. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 67807ce5 upstream. When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x1028067f), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Viresh Kumar authored
commit 27630532 upstream. Since commit d689fe22 (NOHZ: Check for nohz active instead of nohz enabled) the tick_nohz_switch_to_nohz() function returns because it checks for the tick_nohz_active flag. This can't be set, because the function itself sets it. Undo the change in tick_nohz_switch_to_nohz(). Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: fweisbec@gmail.com Cc: Arvind.Chauhan@arm.com Cc: linaro-networking@linaro.org Link: http://lkml.kernel.org/r/40939c05f2d65d781b92b20302b02243d0654224.1397537987.git.viresh.kumar@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Viresh Kumar authored
commit 521c4299 upstream. tick_check_replacement() returns if a replacement of clock_event_device is possible or not. It does this as the first check: if (tick_check_percpu(curdev, newdev, smp_processor_id())) return false; Thats wrong. tick_check_percpu() returns true when the device is useable. Check for false instead. [ tglx: Massaged changelog ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit e0fc17a9 upstream. The git commit a945928e ('xen: Do not enable spinlocks before jump_label_init() has executed') was added to deal with the jump machinery. Earlier the code that turned on the jump label was only called by Xen specific functions. But now that it had been moved to the initcall machinery it gets called on Xen, KVM, and baremetal - ouch!. And the detection machinery to only call it on Xen wasn't remembered in the heat of merge window excitement. This means that the slowpath is enabled on baremetal while it should not be. Reported-by:
Waiman Long <waiman.long@hp.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Kailang Yang authored
commit 7c665932 upstream. Signed-off-by:
-
Sekhar Nori authored
commit 5fc68a6c upstream. The code to handle any length SG lists calls edma_resume() even before edma_start() is called. This is incorrect because edma_resume() enables edma events on the channel after which CPU (in edma_start) cannot clear posted events by writing to ECR (per the EDMA user's guide). Because of this EDMA transfers fail to start if due to some reason there is a pending EDMA event registered even before EDMA transfers are started. This can happen if an EDMA event is a byproduct of device initialization. Fix this by calling edma_resume() only if it is not the first batch of MAX_NR_SG elements. Without this patch, MMC/SD fails to function on DA850 EVM with DMA. The behaviour is triggered by specific IP and this can explain why the issue was not reported before (example with MMC/SD on AM335x). Tested on DA850 EVM and AM335x EVM-SK using MMC/SD card. Cc: Joel Fernandes <joelf@ti.com> Acked-by:
Joel Fernandes <joelf@ti.com> Tested-by:
Jon Ringle <jringle@gridpoint.com> Tested-by:
Alexander Holler <holler@ahsoftware.de> Reported-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Thomas Petazzoni authored
commit cc6ca302 upstream. This reverts commit e3a8786c. While this commit allows to use the mvneta driver as a module on some configurations, it breaks other configurations even if mvneta is used built-in. This breakage is due to the fact that on some RGMII platforms, the PCS bit has to be set, and on some other platforms, it has to be cleared. At the moment, we lack informations to know exactly the significance of this bit (the datasheet only says "enables PCS"), and so we can't produce a patch that will work on all platforms at this point. And since this change is breaking the network completely for many users, it's much better to revert it for now. We'll come back later with a proper fix that takes into account all platforms. Basically: * Armada XP GP is configured as RGMII-ID, and needs the PCS bit to be set. * Armada 370 Mirabox is configured as RGMII-ID, and needs the PCS bit to be cleared. And at the moment, we don't know how to make the distinction between those two cases. One hint is that the Armada XP GP appears in fact to be using a QSGMII connection with the PHY (Quad-SGMII), but configuring it as SGMII doesn't work, while RGMII-ID works. This needs more investigation, but in the mean time, let's unbreak the network for all those users. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reported-by:
Arnaud Ebalard <arno@natisbad.org> Reported-by:
Alexander Reuter <Alexander.Reuter@gmx.net> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=73401Signed-off-by:
-
Emmanuel Grumbach authored
commit 08a732f4 upstream. It was missing. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Helge Deller authored
commit ab3e55b1 upstream. This bug was detected with the libio-epoll-perl debian package where the test case IO-Ppoll-compat.t failed. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Oren Givon authored
commit 80f2679e upstream. Add 2 new HW IDs for the 7265 series. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Felix Fietkau authored
commit 764152ff upstream. Their power value is initialized to zero. This patch fixes an issue where the configured power drops to the minimum value when AP_VLAN interfaces are created/removed. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 115b943a upstream. Jouni reported that when doing off-channel transmissions mixed with on-channel transmissions, the on-channel ones ended up on the off-channel in some cases. The reason for that is that during the refactoring of the off- channel code, I lost the part that stopped all activity and as a consequence the on-channel frames (including data frames) were no longer queued but would be transmitted on the temporary channel. Fix this by simply restoring the lost activity stop call. Fixes: 2eb278e0 ("mac80211: unify SW/offload remain-on-channel") Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
