err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: "David Täht" <d@teklibre.com>
CC: Hitoshi Nakamori <hitoshi.nakamori@gmail.com>
CC: "Ken O'Brien" <kernel@kenobrien.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Jakub Schmidtke <sjakub@gmail.com>
CC: Pekka Paalanen <pq@iki.fi>
CC: Peter Huewe <peterhuewe@gmx.de>
CC: "Ken O'Brien" <kernel@kenobrien.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to initialize a static array to NULL at startup, so we
can use the module_usb_driver() call for the go7007 module.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that our module_init/exit path is just registering and unregistering
the usb driver, we can use module_usb_driver() instead.  This also has
the nice side affect of removing the unneeded printk for the module
version number.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These pcm values should all be stopped properly when the device is
removed from the system (i.e. when disconnect is called), so there's no
need to duplicate this when the module is unloaded as well.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only allocate the version request buffer if it is needed, not when the
module starts up.  This will let us make the module_init path much
smaller.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Static variables are initialized to NULL, no need to do it again in the
module_init function.

CC: Markus Grabner <grabner@icg.tugraz.at>
CC: Stefan Hajnoczi <stefanha@gmail.com>
CC: Julia Lawall <julia@diku.dk>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The n_boardtypes macros are simply open-coded versions of the kernels
ARRAY_SIZE macro. Use the kernel provided macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Routine rtllib_MlmeDisassociateRequest() has a comparison of memcpy()
with NULL, which makes no sense. Analysis of the code suggests that
memcmp() was intended.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that alarm-dev.c uses the upstreamed alarmtimer interfaces,
we can remove the otherwise unused in-kernel android alarm api.

CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reworks the alarm-dev.c to use the upstreamed alarmtimers
interface.

CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Android alarm interface provides a settime call that sets both
the alarmtimer RTC device and CLOCK_REALTIME to the same value.

Since there may be multiple rtc devices, provide a hook to access the
one the alarmtimer infrastructure is using.

CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ALARM_ELAPSED_REALTIME clock domain in Android pointed
to the need for something similar in linux system-wide
(instead of limited to just the alarm interface).

Thus CLOCK_BOOTTIME was introduced into the upstream kernel
in 2.6.39.

This patch attempts to convert the android alarm timer to utilize
the kernel's CLOCK_BOOTTIME clockid for ALARM_ELAPSED_REALTIME,
instead of managing it itself.

CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the user passes an invalid command, then we don't drop the lock
before returning.  The check for invalid commands doesn't need to be
done under lock so I moved it forward a couple lines.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The need for wl_device_dealloc is motivated by the error-handling code for
the failure of wl_adapter_insert.  The need for wl_remove in the third case
is motivated by the code in the definition of wl_pci_remove.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using tab inplace of multiple spaces for indenting.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* No braces for single statement blocks.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of "make versioncheck" told us that:

drivers/staging/rtl8712/osdep_service.h: 32 linux/version.h not needed.
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: 46 linux/version.h not needed.

If we take a look at these files, we will agree to remove it.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Count is used to cap "req->bssindex.data" which is used as an offset
into the hw->scanresults->info.hscanresult.result[] array.  The array
has only HFA384x_SCANRESULT_MAX (31) elements so the 32 is off by one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of "make versioncheck" told us that:

drivers/staging/media/as102/as102_fe.c: 20 linux/version.h not needed.

If we take a look at the code, we can agree to remove this include.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-media@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of "make versioncheck" told us that:

drivers/staging/media/as102/as102_usb_drv.h: 20 linux/version.h not
needed.

If we take a look at the code, we can agree to remove it.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-media@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org >
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of "make versioncheck" told us that:

drivers/staging/media/easycap/easycap_ioctl.c: 2442: need
linux/version.h

If we take a look at the code, we will see the macro KERNEL_VERSION be
used. So, we need this include.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-media@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org >
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of "make versioncheck" told us that:

drivers/staging/vme/devices/vme_pio2_core.c: 13 linux/version.h not needed.
drivers/staging/vme/devices/vme_pio2_gpio.c: 13 linux/version.h not needed.

If we take a look at these files, we will agree to remove it.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The original code had some confusion about the dimensions of the array.
It should have been an array of 2 element arrays but it was declared as
an array of 50 element arrays.

The limitter on the outside array should have been
ARRAY_SIZE(chan_freq_list) or 26 but instead 50 was used.  It meant that
we read past the end.  It's probably harmless but it's obviously worth
fixing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a code style issue.
Signed-off-by: Benedikt Bergenthal <benedikt@kdrennert.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is possible to misconfigure a kernel by selecting the rtllib crypto
routines without enabling the underlying support from the crypto library.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We don't use the rxcmdpkt[] counters at all and we can remove them.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When we received a command we incremented a stat counter depending on
the type of message.  The problem is there were 8 types of commands but
there were only 4 counters allocated so it corrupted memory past the
end of the rxcmdpkt[] array.

The fix is just to remove the counters because they aren't used.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix printk format warnings by using 't' modifier for ptrdiff_t.

drivers/staging/android/alarm.c:344:2: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
drivers/staging/android/alarm.c:367:3: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix spelling typo in comments within android drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no longer any need for this as we have separate
info_mask elements for raw and processed value reads.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Until now all channels have had read/write attributes. This patch
allows for channels where we can't actually read the value (or for
output devices, write it!)

v2 introduces separate elements for processed and raw thus removing
some special case code from the core.  Thanks to Lars-Peter for an
excellent suggestion!
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
This one stands along as it merged just before the series
doing all the other drivers.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in resolvers at the moment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
No processed values in resolvers at the moment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Precursor to making value read / write attribute optional.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>