1. 22 Jun, 2019 13 commits
    • John Paul Adrian Glaubitz's avatar
      sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg · aecf98cd
      John Paul Adrian Glaubitz authored
      [ Upstream commit 07a6d63e ]
      
      In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
      to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.
      
      This results in the hypervisor console device to be listed as "ttyHV0" under
      /proc/consoles while the device node is still named "ttyS0":
      
      root@osaka:~# cat /proc/consoles
      ttyHV0               -W- (EC p  )    4:64
      tty0                 -WU (E     )    4:1
      root@osaka:~# readlink /sys/dev/char/4:64
      ../../devices/root/f02836f0/f0285690/tty/ttyS0
      root@osaka:~#
      
      This means that any userland code which tries to determine the name of the
      device file of the hypervisor console device can not rely on the information
      provided by /proc/consoles. In particular, booting current versions of debian-
      installer inside a SPARC LDOM will fail with the installer unable to determine
      the console device.
      
      After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
      the inconsistency is fixed and it is possible again to determine the name
      of the device file of the hypervisor console device by reading the contents
      of /proc/console:
      
      root@osaka:~# cat /proc/consoles
      ttyHV0               -W- (EC p  )    4:64
      tty0                 -WU (E     )    4:1
      root@osaka:~# readlink /sys/dev/char/4:64
      ../../devices/root/f02836f0/f0285690/tty/ttyHV0
      root@osaka:~#
      
      With this change, debian-installer works correctly when installing inside
      a SPARC LDOM.
      Signed-off-by: default avatarJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      aecf98cd
    • Neil Horman's avatar
      sctp: Free cookie before we memdup a new one · 9cb8eddf
      Neil Horman authored
      [ Upstream commit ce950f10 ]
      
      Based on comments from Xin, even after fixes for our recent syzbot
      report of cookie memory leaks, its possible to get a resend of an INIT
      chunk which would lead to us leaking cookie memory.
      
      To ensure that we don't leak cookie memory, free any previously
      allocated cookie first.
      
      Change notes
      v1->v2
      update subsystem tag in subject (davem)
      repeat kfree check for peer_random and peer_hmacs (xin)
      
      v2->v3
      net->sctp
      also free peer_chunks
      
      v3->v4
      fix subject tags
      
      v4->v5
      remove cut line
      Signed-off-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
      CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      CC: Xin Long <lucien.xin@gmail.com>
      CC: "David S. Miller" <davem@davemloft.net>
      CC: netdev@vger.kernel.org
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9cb8eddf
    • Young Xiao's avatar
      nfc: Ensure presence of required attributes in the deactivate_target handler · 4c85012b
      Young Xiao authored
      [ Upstream commit 385097a3 ]
      
      Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to
      NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to
      accessing them. This prevents potential unhandled NULL pointer dereference
      exceptions which can be triggered by malicious user-mode programs,
      if they omit one or both of these attributes.
      Signed-off-by: default avatarYoung Xiao <92siuyang@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4c85012b
    • John Fastabend's avatar
      net: tls, correctly account for copied bytes with multiple sk_msgs · 20d3d270
      John Fastabend authored
      [ Upstream commit 648ee6ce ]
      
      tls_sw_do_sendpage needs to return the total number of bytes sent
      regardless of how many sk_msgs are allocated. Unfortunately, copied
      (the value we return up the stack) is zero'd before each new sk_msg
      is allocated so we only return the copied size of the last sk_msg used.
      
      The caller (splice, etc.) of sendpage will then believe only part
      of its data was sent and send the missing chunks again. However,
      because the data actually was sent the receiver will get multiple
      copies of the same data.
      
      To reproduce this do multiple sendfile calls with a length close to
      the max record size. This will in turn call splice/sendpage, sendpage
      may use multiple sk_msg in this case and then returns the incorrect
      number of bytes. This will cause splice to resend creating duplicate
      data on the receiver. Andre created a C program that can easily
      generate this case so we will push a similar selftest for this to
      bpf-next shortly.
      
      The fix is to _not_ zero the copied field so that the total sent
      bytes is returned.
      Reported-by: default avatarSteinar H. Gunderson <steinar+kernel@gunderson.no>
      Reported-by: default avatarAndre Tomt <andre@tomt.net>
      Tested-by: default avatarAndre Tomt <andre@tomt.net>
      Fixes: d829e9c4 ("tls: convert to generic sk_msg interface")
      Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      20d3d270
    • Taehee Yoo's avatar
      net: openvswitch: do not free vport if register_netdevice() is failed. · 39ea88e3
      Taehee Yoo authored
      [ Upstream commit 309b6697 ]
      
      In order to create an internal vport, internal_dev_create() is used and
      that calls register_netdevice() internally.
      If register_netdevice() fails, it calls dev->priv_destructor() to free
      private data of netdev. actually, a private data of this is a vport.
      
      Hence internal_dev_create() should not free and use a vport after failure
      of register_netdevice().
      
      Test command
          ovs-dpctl add-dp bonding_masters
      
      Splat looks like:
      [ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access
      [ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
      [ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G    B             5.2.0-rc3+ #240
      [ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch]
      [ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4
      [ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206
      [ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704
      [ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560
      [ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881
      [ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000
      [ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698
      [ 1035.777709] FS:  00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000
      [ 1035.777709] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0
      [ 1035.777709] Call Trace:
      [ 1035.777709]  ovs_vport_add+0x267/0x4f0 [openvswitch]
      [ 1035.777709]  new_vport+0x15/0x1e0 [openvswitch]
      [ 1035.777709]  ovs_vport_cmd_new+0x567/0xd10 [openvswitch]
      [ 1035.777709]  ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch]
      [ 1035.777709]  ? __kmalloc+0x131/0x2e0
      [ 1035.777709]  ? genl_family_rcv_msg+0xa54/0x1030
      [ 1035.777709]  genl_family_rcv_msg+0x63a/0x1030
      [ 1035.777709]  ? genl_unregister_family+0x630/0x630
      [ 1035.841681]  ? debug_show_all_locks+0x2d0/0x2d0
      [ ... ]
      
      Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.")
      Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
      Reviewed-by: default avatarGreg Rose <gvrose8192@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      39ea88e3
    • Linus Walleij's avatar
      net: dsa: rtl8366: Fix up VLAN filtering · 22da034c
      Linus Walleij authored
      [ Upstream commit 760c80b7 ]
      
      We get this regression when using RTL8366RB as part of a bridge
      with OpenWrt:
      
      WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291
      	 switchdev_port_attr_set_now+0x80/0xa4
      lan0: Commit of attribute (id=7) failed.
      (...)
      realtek-smi switch lan0: failed to initialize vlan filtering on this port
      
      This is because it is trying to disable VLAN filtering
      on VLAN0, as we have forgot to add 1 to the port number
      to get the right VLAN in rtl8366_vlan_filtering(): when
      we initialize the VLAN we associate VLAN1 with port 0,
      VLAN2 with port 1 etc, so we need to add 1 to the port
      offset.
      
      Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver")
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      22da034c
    • Eric Dumazet's avatar
      neigh: fix use-after-free read in pneigh_get_next · d97ce9c7
      Eric Dumazet authored
      [ Upstream commit f3e92cb8 ]
      
      Nine years ago, I added RCU handling to neighbours, not pneighbours.
      (pneigh are not commonly used)
      
      Unfortunately I missed that /proc dump operations would use a
      common entry and exit point : neigh_seq_start() and neigh_seq_stop()
      
      We need to read_lock(tbl->lock) or risk use-after-free while
      iterating the pneigh structures.
      
      We might later convert pneigh to RCU and revert this patch.
      
      sysbot reported :
      
      BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
      Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825
      
      CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x172/0x1f0 lib/dump_stack.c:113
       print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
       __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
       kasan_report+0x12/0x20 mm/kasan/common.c:614
       __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
       pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
       neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
       seq_read+0x9cf/0x1110 fs/seq_file.c:258
       proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
       do_loop_readv_writev fs/read_write.c:714 [inline]
       do_loop_readv_writev fs/read_write.c:701 [inline]
       do_iter_read+0x4a4/0x660 fs/read_write.c:935
       vfs_readv+0xf0/0x160 fs/read_write.c:997
       kernel_readv fs/splice.c:359 [inline]
       default_file_splice_read+0x475/0x890 fs/splice.c:414
       do_splice_to+0x127/0x180 fs/splice.c:877
       splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
       do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
       do_sendfile+0x597/0xd00 fs/read_write.c:1464
       __do_sys_sendfile64 fs/read_write.c:1525 [inline]
       __se_sys_sendfile64 fs/read_write.c:1511 [inline]
       __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
       do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x4592c9
      Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
      RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
      RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
      RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
      R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff
      
      Allocated by task 9827:
       save_stack+0x23/0x90 mm/kasan/common.c:71
       set_track mm/kasan/common.c:79 [inline]
       __kasan_kmalloc mm/kasan/common.c:489 [inline]
       __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
       kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
       __do_kmalloc mm/slab.c:3660 [inline]
       __kmalloc+0x15c/0x740 mm/slab.c:3669
       kmalloc include/linux/slab.h:552 [inline]
       pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
       arp_req_set_public net/ipv4/arp.c:1010 [inline]
       arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
       arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
       inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
       sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
       sock_ioctl+0x3ed/0x780 net/socket.c:1194
       vfs_ioctl fs/ioctl.c:46 [inline]
       file_ioctl fs/ioctl.c:509 [inline]
       do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
       ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
       __do_sys_ioctl fs/ioctl.c:720 [inline]
       __se_sys_ioctl fs/ioctl.c:718 [inline]
       __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
       do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 9824:
       save_stack+0x23/0x90 mm/kasan/common.c:71
       set_track mm/kasan/common.c:79 [inline]
       __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
       kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
       __cache_free mm/slab.c:3432 [inline]
       kfree+0xcf/0x220 mm/slab.c:3755
       pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
       __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
       neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
       arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
       inetdev_destroy net/ipv4/devinet.c:319 [inline]
       inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
       notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
       __raw_notifier_call_chain kernel/notifier.c:396 [inline]
       raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
       call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
       call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
       call_netdevice_notifiers net/core/dev.c:1775 [inline]
       rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
       rollback_registered+0x109/0x1d0 net/core/dev.c:8220
       unregister_netdevice_queue net/core/dev.c:9267 [inline]
       unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
       unregister_netdevice include/linux/netdevice.h:2631 [inline]
       __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
       tun_detach drivers/net/tun.c:741 [inline]
       tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
       __fput+0x2ff/0x890 fs/file_table.c:280
       ____fput+0x16/0x20 fs/file_table.c:313
       task_work_run+0x145/0x1c0 kernel/task_work.c:113
       tracehook_notify_resume include/linux/tracehook.h:185 [inline]
       exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
       prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
       syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
       do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      The buggy address belongs to the object at ffff888097f2a700
       which belongs to the cache kmalloc-64 of size 64
      The buggy address is located 0 bytes inside of
       64-byte region [ffff888097f2a700, ffff888097f2a740)
      The buggy address belongs to the page:
      page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
      flags: 0x1fffc0000000200(slab)
      raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
      raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
      page dumped because: kasan: bad access detected
      
      Memory state around the buggy address:
       ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
       ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
      >ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                         ^
       ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
       ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
      
      Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d97ce9c7
    • Jeremy Sowden's avatar
      lapb: fixed leak of control-blocks. · da930ec9
      Jeremy Sowden authored
      [ Upstream commit 6be8e297 ]
      
      lapb_register calls lapb_create_cb, which initializes the control-
      block's ref-count to one, and __lapb_insert_cb, which increments it when
      adding the new block to the list of blocks.
      
      lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
      when removing control-block from the list of blocks, and calls lapb_put
      itself to decrement the ref-count before returning.
      
      However, lapb_unregister also calls __lapb_devtostruct to look up the
      right control-block for the given net_device, and __lapb_devtostruct
      also bumps the ref-count, which means that when lapb_unregister returns
      the ref-count is still 1 and the control-block is leaked.
      
      Call lapb_put after __lapb_devtostruct to fix leak.
      
      Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
      Signed-off-by: default avatarJeremy Sowden <jeremy@azazel.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      da930ec9
    • Eric Dumazet's avatar
      ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero · a7f938c9
      Eric Dumazet authored
      [ Upstream commit 65a3c497 ]
      
      Before taking a refcount, make sure the object is not already
      scheduled for deletion.
      
      Same fix is needed in ipv6_flowlabel_opt()
      
      Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a7f938c9
    • Haiyang Zhang's avatar
      hv_netvsc: Set probe mode to sync · 3514df79
      Haiyang Zhang authored
      [ Upstream commit 9a33629b ]
      
      For better consistency of synthetic NIC names, we set the probe mode to
      PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus
      channel offer sequence.
      
      Fixes: af0a5646 ("use the new async probing feature for the hyperv drivers")
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3514df79
    • Ivan Vecera's avatar
      be2net: Fix number of Rx queues used for flow hashing · 1a976c6c
      Ivan Vecera authored
      [ Upstream commit 718f4a25 ]
      
      Number of Rx queues used for flow hashing returned by the driver is
      incorrect and this bug prevents user to use the last Rx queue in
      indirection table.
      
      Let's say we have a NIC with 6 combined queues:
      
      [root@sm-03 ~]# ethtool -l enp4s0f0
      Channel parameters for enp4s0f0:
      Pre-set maximums:
      RX:             5
      TX:             5
      Other:          0
      Combined:       6
      Current hardware settings:
      RX:             0
      TX:             0
      Other:          0
      Combined:       6
      
      Default indirection table maps all (6) queues equally but the driver
      reports only 5 rings available.
      
      [root@sm-03 ~]# ethtool -x enp4s0f0
      RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
          0:      0     1     2     3     4     5     0     1
          8:      2     3     4     5     0     1     2     3
         16:      4     5     0     1     2     3     4     5
         24:      0     1     2     3     4     5     0     1
      ...
      
      Now change indirection table somehow:
      
      [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
      [root@sm-03 ~]# ethtool -x enp4s0f0
      RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
          0:      0     0     0     0     0     0     0     0
      ...
         64:      1     1     1     1     1     1     1     1
      ...
      
      Now it is not possible to change mapping back to equal (default) state:
      
      [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
      Cannot set RX flow hash configuration: Invalid argument
      
      Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options")
      Reported-by: default avatarTianhao <tizhao@redhat.com>
      Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1a976c6c
    • Eric Dumazet's avatar
      ax25: fix inconsistent lock state in ax25_destroy_timer · 5f9c0c15
      Eric Dumazet authored
      [ Upstream commit d4d5d8e8 ]
      
      Before thread in process context uses bh_lock_sock()
      we must disable bh.
      
      sysbot reported :
      
      WARNING: inconsistent lock state
      5.2.0-rc3+ #32 Not tainted
      
      inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
      blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
      00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
      00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
      {SOFTIRQ-ON-W} state was registered at:
        lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
        __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
        _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
        spin_lock include/linux/spinlock.h:338 [inline]
        ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
        ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
        __sys_connect+0x264/0x330 net/socket.c:1834
        __do_sys_connect net/socket.c:1845 [inline]
        __se_sys_connect net/socket.c:1842 [inline]
        __x64_sys_connect+0x73/0xb0 net/socket.c:1842
        do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
        entry_SYSCALL_64_after_hwframe+0x49/0xbe
      irq event stamp: 2272
      hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
      hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
      softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
      softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
      softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414
      
      other info that might help us debug this:
       Possible unsafe locking scenario:
      
             CPU0
             ----
        lock(slock-AF_AX25);
        <Interrupt>
          lock(slock-AF_AX25);
      
       *** DEADLOCK ***
      
      1 lock held by blkid/26581:
       #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
       #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312
      
      stack backtrace:
      CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       <IRQ>
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x172/0x1f0 lib/dump_stack.c:113
       print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
       valid_state kernel/locking/lockdep.c:2948 [inline]
       mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
       mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
       mark_irqflags kernel/locking/lockdep.c:3391 [inline]
       __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
       lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:338 [inline]
       ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
       call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
       expire_timers kernel/time/timer.c:1366 [inline]
       __run_timers kernel/time/timer.c:1685 [inline]
       __run_timers kernel/time/timer.c:1653 [inline]
       run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
       __do_softirq+0x25c/0x94c kernel/softirq.c:293
       invoke_softirq kernel/softirq.c:374 [inline]
       irq_exit+0x180/0x1d0 kernel/softirq.c:414
       exiting_irq arch/x86/include/asm/apic.h:536 [inline]
       smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
       apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
       </IRQ>
      RIP: 0033:0x7f858d5c3232
      Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
      RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
      RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
      RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
      RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
      R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
      R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5f9c0c15
    • Florian Westphal's avatar
      netfilter: nat: fix udp checksum corruption · f51ec54d
      Florian Westphal authored
      commit 6bac76db upstream.
      
      Due to copy&paste error nf_nat_mangle_udp_packet passes IPPROTO_TCP,
      resulting in incorrect udp checksum when payload had to be mangled.
      
      Fixes: dac3fe72 ("netfilter: nat: remove csum_recalc hook")
      Reported-by: default avatarMarc Haber <mh+netdev@zugschlus.de>
      Tested-by: default avatarMarc Haber <mh+netdev@zugschlus.de>
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f51ec54d
  2. 19 Jun, 2019 27 commits