- 06 Jun, 2014 40 commits
-
-
Catalin Marinas authored
Kmemleak could ignore memory blocks allocated via memblock_alloc() leading to false positives during scanning. This patch adds the corresponding callbacks and removes kmemleak_free_* calls in mm/nobootmem.c to avoid duplication. The kmemleak_alloc() in mm/nobootmem.c is kept since __alloc_memory_core_early() does not use memblock_alloc() directly. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Catalin Marinas authored
When mempool_alloc() returns an existing pool object, kmemleak_alloc() is no longer called and the stack trace corresponds to the original object allocation. This patch updates the kmemleak allocation stack trace for such objects to make it more useful for debugging. Signed-off-by:
-
Catalin Marinas authored
Since radix_tree_preload() stack trace is not always useful for debugging an actual radix tree memory leak, this patch updates the kmemleak allocation stack trace in the radix_tree_node_alloc() function. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Catalin Marinas authored
The memory allocation stack trace is not always useful for debugging a memory leak (e.g. radix_tree_preload). This function, when called, updates the stack trace for an already allocated object. Signed-off-by:
-
Jianpeng Ma authored
Signed-off-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
-
Michal Hocko authored
Memory reclaim always uses swappiness of the reclaim target memcg (origin of the memory pressure) or vm_swappiness for global memory reclaim. This behavior was consistent (except for difference between global and hard limit reclaim) because swappiness was enforced to be consistent within each memcg hierarchy. After "mm: memcontrol: remove hierarchy restrictions for swappiness and oom_control" each memcg can have its own swappiness independent of hierarchical parents, though, so the consistency guarantee is gone. This can lead to an unexpected behavior. Say that a group is explicitly configured to not swapout by memory.swappiness=0 but its memory gets swapped out anyway when the memory pressure comes from its parent with a It is also unexpected that the knob is meaningless without setting the hard limit which would trigger the reclaim and enforce the swappiness. There are setups where the hard limit is configured higher in the hierarchy by an administrator and children groups are under control of somebody else who is interested in the swapout behavior but not necessarily about the memory limit. From a semantic point of view swappiness is an attribute defining anon vs. file proportional scanning of LRU which is memcg specific (unlike charges which are propagated up the hierarchy) so it should be applied to the particular memcg's LRU regardless where the memory pressure comes from. This patch removes vmscan_swappiness() and stores the swappiness into the scan_control structure. mem_cgroup_swappiness is then used to provide the correct value before shrink_lruvec is called. The global vm_swappiness is used for the root memcg. [hughd@google.com: oopses immediately when booted with cgroup_disable=memory] Signed-off-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Rik van Riel authored
Some sysrq handlers can run for a long time, because they dump a lot of data onto a serial console. Having RCU stall warnings pop up in the middle of them only makes the problem worse. This patch temporarily disables RCU stall warnings while a sysrq request is handled. Signed-off-by:
Rik van Riel <riel@redhat.com> Suggested-by:
Paul McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Rik van Riel authored
Echoing values into /proc/sysrq-trigger seems to be a popular way to get information out of the kernel. However, dumping information about thousands of processes, or hundreds of CPUs to serial console can result in IRQs being blocked for minutes, resulting in various kinds of cascade failures. The most common failure is due to interrupts being blocked for a very long time. This can lead to things like failed IO requests, and other things the system cannot easily recover from. This problem is easily fixable by making __handle_sysrq use RCU instead of spin_lock_irqsave. This leaves the warning that RCU grace periods have not elapsed for a long time, but the system will come back from that automatically. It also leaves sysrq-from-irq-context when the sysrq keys are pressed, but that is probably desired since people want that to work in situations where the system is already hosed. The callers of register_sysrq_key and unregister_sysrq_key appear to be capable of sleeping. Signed-off-by:
Madper Xie <cxie@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Fabian Frederick authored
__constant_cpu_to_le32 converted to cpu_to_le32 Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Fabian Frederick authored
-Trivial code clean-up -Fix endif }; (coccinelle warning) Signed-off-by:
-
Davidlohr Bueso authored
Performing vma lookups without taking the mm->mmap_sem is asking for trouble. While doing the search, the vma in question can be modified or even removed before returning to the caller. Take the lock (shared) in order to avoid races while iterating through the vmacache and/or rbtree. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Cc: Steven Miao <realmz6@gmail.com> Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
-
Fabian Frederick authored
+ fix small typo Signed-off-by:
-
Manfred Spraul authored
The actual Linux implementation for semctl(GETNCNT) and semctl(GETZCNT) always (since 0.99.10) reported a thread as sleeping on all semaphores that are listed in the semop() call. The documented behavior (both in the Linux man page and in the Single Unix Specification) is that a task should be reported on exactly one semaphore: The semaphore that caused the thread to got to sleep. This patch adds a pr_info_once() that is triggered if a thread hits the relevant case. The code triggers slightly too often, otherwise it would be necessary to replicate the old code. As there are no known users of GETNCNT or GETZCNT, this is done to prevent unnecessary bloat. The task that triggered is reported with name (tsk->comm) and pid. Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Acked-by:
-
Manfred Spraul authored
SUSv4 clearly defines how semncnt and semzcnt must be calculated: A task waits on exactly one semaphore: The semaphore from the first operation in the sop array that cannot proceed. The Linux implementation never followed the standard, it tried to count all semaphores that might be the reason why a task sleeps. This patch fixes that. Note: a) The implementation assumes that GETNCNT and GETZCNT are rare operations, therefore the code counts them only on demand. (If they wouldn't be rare, then the non-compliance would have been found earlier) b) compared to the initial version of the patch, the BUG_ONs were removed and it was clarified that the new behavior conforms to SUS. Back-compatibility concerns: Manfred: : - there is no application in Fedora that uses GETNCNT or GETZCNT. : : - application that use only single-sop semop() are also safe, the : difference only affects complex apps. : : - portable application are also safe, the new behavior is standard : compliant. : : But that's it. The old behavior existed in Linux from 0.99.something : until now. Michael: : * These operations seem to be very little used. Grepping the public : source that is contained Fedora 20 source DVD, there appear to be no : uses. Of course, this says nothing about uses in private / : non-mainstream FOSS code, but it seems likely that the same pattern : is followed there. : : * The existing behavior is hard enough to understand that I suspect : that no one understood it well enough to rely on it anyway : (especially as that behavior contradicted both man page and POSIX). : : So, there's a chance of breakage, but I estimate that it's minute. Signed-off-by:
-
Manfred Spraul authored
Preparation for the next patch: In the slow-path of perform_atomic_semop(), store a pointer to the operation that caused the operation to block. Signed-off-by:
-
Manfred Spraul authored
Right now, perform_atomic_semop gets the content of sem_queue as individual fields. Changes that, instead pass a pointer to sem_queue. This is a preparation for the next patch: it uses sem_queue to store the reason why a task must sleep. Signed-off-by:
-
Manfred Spraul authored
count_semzcnt and count_semncnt are more of less identical. The patch creates a single function that either counts the number of tasks waiting for zero or waiting due to a decrease operation. Compared to the initial version, the BUG_ONs were removed. Signed-off-by:
-
Manfred Spraul authored
GETZCNT is supposed to return the number of threads that wait until a semaphore value becomes 0. The current implementation overlooks complex operations that contain both wait-for-zero operation and operations that alter at least one semaphore. The patch fixes that. It's intentionally copy&paste, this will be cleaned up in the next patch. Signed-off-by:
-
Davidlohr Bueso authored
The need for volatile is not obvious, document it. Signed-off-by:
-
Davidlohr Bueso authored
Nothing big and no logical changes, just get rid of some redundant function declarations. Move msg_[init/exit]_ns down the end of the file. Signed-off-by:
-
Davidlohr Bueso authored
Call __set_current_state() instead of assigning the new state directly. Signed-off-by:
Manfred Spraul <manfred@colorfullif.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Signed-off-by:
-
Davidlohr Bueso authored
This is useful in the future and allows users to better understand the reasoning behind the changes. Also use UL as we're dealing with it anyways. Signed-off-by:
-
