The rt5616 codec registers itself as an i2c driver, but can
be enabled even when i2c is turned off, which leads to a build
error:

codecs/rt5616.c:1419:1: error: data definition has no type or storage class [-Werror]
 module_i2c_driver(rt5616_i2c_driver);

This adds an explicit Kconfig dependency, like the other codec
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 288bc356 ("ASoC: rt5616: allow to build with CONFIG_SND_SOC_RT5616")
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge remote-tracking branches 'asoc/topic/sunxi', 'asoc/topic/topology' and 'asoc/topic/wm8974' into asoc-next

Merge remote-tracking branches 'asoc/topic/rt5640', 'asoc/topic/rt5659', 'asoc/topic/samsung' and 'asoc/topic/ssm4567' into asoc-next

Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rockchip', 'asoc/topic/rt298', 'asoc/topic/rt5514' and 'asoc/topic/rt5616' into asoc-next

Merge remote-tracking branches 'asoc/topic/max98926', 'asoc/topic/mtk', 'asoc/topic/mxs-saif', 'asoc/topic/nau8825' and 'asoc/topic/omap' into asoc-next

Merge remote-tracking branches 'asoc/topic/fsl-sai', 'asoc/topic/fsl-ssl', 'asoc/topic/hdac' and 'asoc/topic/max9867' into asoc-next

Merge remote-tracking branches 'asoc/topic/davinci', 'asoc/topic/fsl-card' and 'asoc/topic/fsl-mpc5200' into asoc-next

Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/bcm2835' and 'asoc/topic/cs42xx8' into asoc-next

Merge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/adau17x1', 'asoc/topic/ads117x', 'asoc/topic/adsp' and 'asoc/topic/arizona' into asoc-next

ASoC: Fixes for v4.5

This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places.  They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.

The other changes are:
 - A fix for Qualcomm devices to work on big endian systems.  The
   original change is actually correct but triggered a bug in regmap
   which is too invasive to fix for this cycle and can be worked around
   by just letting regmap pick the default.
 - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
   spinlocks when it needed to.
 - A fix for the new Intel Sky Lake driver forgetting that C pointer
   arithmetic takes the type of the pointer into consideration.
 - A revert of a change to the FSL SSI driver that broke some systems.
 - A fix for the cleanup path of the wm9713 driver.
 - A fix for some incorrect register definitions in the ADAU17x1 driver
   that caused misclocking in some configurations.
 - A fix for the tracepoints for jack detection to avoid using an
   internal field of the core jack structure which is no longer present
   in all configurations.
 - A fix for another of the new Intel drivers which tried to write to a
   string literal.

# gpg: Signature made Mon 07 Mar 2016 09:41:48 ICT using RSA key ID 5D5487D0
# gpg: key CD7BEEBC: no public key for trusted key - skipped
# gpg: key CD7BEEBC marked as ultimately trusted
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: key 5C6153AD: no public key for trusted key - skipped
# gpg: key 5C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Renesas sound driver user needs to read its datasheet when create DT.
But it is difficult to understand, because it has many modules
(SRC/CTU/MIX/DVC/SSIU/SSI/AudioDMAC/AudioDMACperiperi),
and many features (Asynchronous/Synchronous mode on SRC, CTU matrix,
DVC volume settings feature, Multi-SSI/TDM-SSI, etc).
This patch adds simplified explanation to help setting/understanding.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Broxton HDMI codec is similar to Skylake so add the device ID
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Broxton is an Intel SoC which sports a DSP and system is quite
like Skylake. So add this ID in Skylake driver
Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The code loading for Skylake and other platforms is different, so
add a dsp_ops and a loader_ops which can be defined for each
platform.

Move the dsp init, cleanup and loader ops (alloc and free dma) to
these ops
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Broxton uses HDA DMA so needs to keep dmab in the driver context
so add it
Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The function skl_dsp_enable_core will be called by other parts of
driver so this can no longer be a static function.
Signed-off-by: Jayachandran B <jayachandran.b@intel.com>
Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Some double whitespaces issues existed in driver, so fix them up.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The module ID defines are common to other platforms so can be
reused if moved to a common driver header so move it
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

DRA7xx family is compatible with the OMAP5 HDMI.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Reduce pop noise in power up and down sequence when playback.
The DAPM widgets graph is reconstructed to ensure the
register write sequence at playback matches exactly to the
v5 clickless sequence provided by Nuvoton.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

While building m32r allmodconfig the build failed with:
ERROR: "bad_dma_ops" [sound/soc/qcom/snd-soc-lpass-platform.ko] undefined!
ERROR: "dma_common_mmap" [sound/soc/qcom/snd-soc-lpass-platform.ko] undefined!

To satisfy the dependency CONFIG_SND_SOC_LPASS_PLATFORM should depend
on HAS_DMA.
Some other configs also needs the dependency on HAS_DMA as they are
directly or indirectly selecting SND_SOC_LPASS_PLATFORM.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>

Instead of depending on individual SoCs make the edma-pcm depend on the eDMA
dmaengine driver (TI_EDMA).
Update the help text and add DRA7xx family since they have eDMA integrated
as well along with sDMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

In case when the dai format is set via the dai_link the format
configuration happens once when the links are probed. If the McASP lose
context after this, the information will be lost and McASP will not going
to work correctly.
To overcome this issue, we save the fmt and set it within hw_params as
well.
Reported-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fixes: 44029e9e1290 ("ASoC: wm_adsp: wm_coeff_{read|write}_control should use passed length")
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Audio infoframe used incorrect buffer, so fix it.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We are getting build warning about:
sound/soc/codecs/rt5640.c:1892:11: warning: unused variable 'dai_sel'

The use of the variable was removed but the variable itself was not
removed.

Fixes: c467fc0e ("ASoC: rt5640: Set PLL src according to source")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>

CMD.out should use same as SRC.out for TIMSEL settings,
but it cares Playback case only. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

SRC has Sync/Async mode, and it can't use Sync mode when Capture
with CMD. In Async mode, it needs to care about in/out SRC rate
for settings, but current driver supporting Playback case only.
This patch supports Capture case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

SRC will convert rate, and then, CMD and SSI want to know its
rate (= SRC.in / SRC.out) for each purpose.
Current driver is supporting only Playback, but SRC+Capture support
needs more flexibility.
This patch adds rsnd_src_get_in/out_rate() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

rsnd_enable_sync_convert() is for checking, not for setting.
In order to avoid confusion, this patch renamed it to
rsnd_src_sync_is_enabled()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

To reduce confusion, SRC uses "mod" instead of "src"
as function parameter
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>