Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:

  kernel/workqueue.c: In function ‘get_work_pwq’:
  kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    713 |                 return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
        |                        ^
  [ ... a couple of other cases ... ]

and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.

Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.

The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused.  The mask needs to be 'unsigned long', not some unspecified
enum type.

To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.

That's now how we roll in the kernel.

So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.

Incidentally, this magically makes clang generate better code.  That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from ipsec, bpf, mptcp and netfilter.

  Current release - regressions:

   - netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain

   - eth: mlx5e:
      - fix scheduling of IPsec ASO query while in atomic
      - free IRQ rmap and notifier on kernel shutdown

  Current release - new code bugs:

   - phy: manual remove LEDs to ensure correct ordering

  Previous releases - regressions:

   - mptcp: fix possible divide by zero in recvmsg()

   - dsa: revert "net: phy: dp83867: perform soft reset and retain
     established link"

  Previous releases - always broken:

   - sched: netem: acquire qdisc lock in netem_change()

   - bpf:
      - fix verifier id tracking of scalars on spill
      - fix NULL dereference on exceptions
      - accept function names that contain dots

   - netfilter: disallow element updates of bound anonymous sets

   - mptcp: ensure listener is unhashed before updating the sk status

   - xfrm:
      - add missed call to delete offloaded policies
      - fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets

   - selftests: fixes for FIPS mode

   - dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling

   - eth: sfc: use budget for TX completions

  Misc:

   - wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"

* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
  revert "net: align SO_RCVMARK required privileges with SO_MARK"
  net: wwan: iosm: Convert single instance struct member to flexible array
  sch_netem: acquire qdisc lock in netem_change()
  selftests: forwarding: Fix race condition in mirror installation
  wifi: mac80211: report all unusable beacon frames
  mptcp: ensure listener is unhashed before updating the sk status
  mptcp: drop legacy code around RX EOF
  mptcp: consolidate fallback and non fallback state machine
  mptcp: fix possible list corruption on passive MPJ
  mptcp: fix possible divide by zero in recvmsg()
  mptcp: handle correctly disconnect() failures
  bpf: Force kprobe multi expected_attach_type for kprobe_multi link
  bpf/btf: Accept function names that contain dots
  Revert "net: phy: dp83867: perform soft reset and retain established link"
  net: mdio: fix the wrong parameters
  netfilter: nf_tables: Fix for deleting base chains with payload
  netfilter: nfnetlink_osf: fix module autoload
  netfilter: nf_tables: drop module reference after updating chain
  netfilter: nf_tables: disallow timeout for anonymous sets
  netfilter: nf_tables: disallow updates of anonymous sets
  ...

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Correctly save/restore PMUSERNR_EL0 when host userspace is using
     PMU counters directly

   - Fix GICv2 emulation on GICv3 after the locking rework

   - Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
     document why

  Generic:

   - Avoid setting page table entries pointing to a deleted memslot if a
     host page table entry is changed concurrently with the deletion"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Avoid illegal stage2 mapping on invalid memory slot
  KVM: arm64: Use raw_smp_processor_id() in kvm_pmu_probe_armpmu()
  KVM: arm64: Restore GICv2-on-GICv3 functionality
  KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded
  KVM: arm64: PMU: Restore the host's PMUSERENR_EL0

Pull powerpc fix from Michael Ellerman:

 - Disable IRQs when switching mm in exit_lazy_flush_tlb() called from
   exit_mmap()

Thanks to Nicholas Piggin and Sachin Sant.

* tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled

Pull pci fix from Bjorn Helgaas:

 - Transfer Intel LGM GW PCIe maintenance from Rahul Tanwar to Chuanhua
   Lei (Zhu YiXin)

* tag 'pci-v6.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Chuanhua Lei as Intel LGM GW PCIe maintainer

Pull MMC fixes from Ulf Hansson:

 - Fix support for deferred probing for several host drivers

 - litex_mmc: Use async probe as it's common for all mmc hosts

 - meson-gx: Fix bug when scheduling while atomic

 - mmci_stm32: Fix max busy timeout calculation

 - sdhci-msm: Disable broken 64-bit DMA on MSM8916

* tag 'mmc-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: usdhi60rol0: fix deferred probing
  mmc: sunxi: fix deferred probing
  mmc: sh_mmcif: fix deferred probing
  mmc: sdhci-spear: fix deferred probing
  mmc: sdhci-acpi: fix deferred probing
  mmc: owl: fix deferred probing
  mmc: omap_hsmmc: fix deferred probing
  mmc: omap: fix deferred probing
  mmc: mvsdio: fix deferred probing
  mmc: mtk-sd: fix deferred probing
  mmc: meson-gx: fix deferred probing
  mmc: bcm2835: fix deferred probing
  mmc: litex_mmc: set PROBE_PREFER_ASYNCHRONOUS
  mmc: meson-gx: remove redundant mmc_request_done() call from irq context
  mmc: mmci: stm32: fix max busy timeout calculation
  mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916

Merge tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "One small fix for an AMD PMF driver issue which is causing issues for
  users of just released AMD laptop models"

* tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmf: Register notify handler only if SPS is enabled

Pull io_uring fixes from Jens Axboe:
 "A fix for a race condition with poll removal and linked timeouts, and
  then a few followup fixes/tweaks for the msg_control patch from last
  week.

  Not super important, particularly the sparse fixup, as it was broken
  before that recent commit. But let's get it sorted for real for this
  release, rather than just have it broken a bit differently"

* tag 'io_uring-6.4-2023-06-21' of git://git.kernel.dk/linux:
  io_uring/net: use the correct msghdr union member in io_sendmsg_copy_hdr
  io_uring/net: disable partial retries for recvmsg with cmsg
  io_uring/net: clear msg_controllen on partial sendmsg retry
  io_uring/poll: serialize poll linked timer start with poll removal

Pull cgroup fixes from Tejun Heo:
 "It's late but here are two bug fixes. Both fix problems which can be
  severe but are very confined in scope. The risk to most use cases
  should be minimal.

   - Fix for an old bug which triggers if a cgroup subsystem is
     remounted to a different hierarchy while someone is reading its
     cgroup.procs/tasks file. The risk is pretty low given how seldom
     cgroup subsystems are moved across hierarchies.

   - We moved cpus_read_lock() outside of cgroup internal locks a while
     ago but forgot to update the legacy_freezer leading to lockdep
     triggers. Fixed"

* tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Do not corrupt task iteration when rebinding subsystem
  cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()

Merge tag 'kvmarm-fixes-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.4, take #4

- Correctly save/restore PMUSERNR_EL0 when host userspace is using
  PMU counters directly

- Fix GICv2 emulation on GICv3 after the locking rework

- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
  document why...

We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.

The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().

  CPU-A                    CPU-B
  -----                    -----
                           ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
                           kvm_vm_ioctl_set_memory_region
                           kvm_set_memory_region
                           __kvm_set_memory_region
                           kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
                             kvm_invalidate_memslot
                               kvm_copy_memslot
                               kvm_replace_memslot
                               kvm_swap_active_memslots        (A)
                               kvm_arch_flush_shadow_memslot   (B)
  same page sharing by KSM
  kvm_mmu_notifier_invalidate_range_start
        :
  kvm_mmu_notifier_change_pte
    kvm_handle_hva_range
    __kvm_handle_hva_range
    kvm_set_spte_gfn            (C)
        :
  kvm_mmu_notifier_invalidate_range_end

Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.

We tried a git-bisect and the first problematic commit is cd4c7183 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d
("KVM: ARM: Memory virtualization setup").

Cc: stable@vger.kernel.org # v3.9+
Fixes: d5d8184d ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

This is v3, including a crash fix for patch 01/14.

The following patchset contains Netfilter/IPVS fixes for net:

1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock.

2) Fix chain binding transaction logic, add a bound flag to rule
   transactions. Remove incorrect logic in nft_data_hold() and
   nft_data_release().

3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing
   the set/chain as a follow up to 1240eb93 ("netfilter: nf_tables:
   incorrect error path handling with NFT_MSG_NEWRULE")

4) Drop map element references from preparation phase instead of
   set destroy path, otherwise bogus EBUSY with transactions such as:

        flush chain ip x y
        delete chain ip x w

   where chain ip x y contains jump/goto from set elements.

5) Pipapo set type does not regard generation mask from the walk
   iteration.

6) Fix reference count underflow in set element reference to
   stateful object.

7) Several patches to tighten the nf_tables API:
   - disallow set element updates of bound anonymous set
   - disallow unbound anonymous set/chain at the end of transaction.
   - disallow updates of anonymous set.
   - disallow timeout configuration for anonymous sets.

8) Fix module reference leak in chain updates.

9) Fix nfnetlink_osf module autoload.

10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as
    in iptables-nft.

This Netfilter batch is larger than usual at this stage, I am aware we
are fairly late in the -rc cycle, if you prefer to route them through
net-next, please let me know.

netfilter pull request 23-06-21

* tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Fix for deleting base chains with payload
  netfilter: nfnetlink_osf: fix module autoload
  netfilter: nf_tables: drop module reference after updating chain
  netfilter: nf_tables: disallow timeout for anonymous sets
  netfilter: nf_tables: disallow updates of anonymous sets
  netfilter: nf_tables: reject unbound chain set before commit phase
  netfilter: nf_tables: reject unbound anonymous set before commit phase
  netfilter: nf_tables: disallow element updates of bound anonymous sets
  netfilter: nf_tables: fix underflow in object reference counter
  netfilter: nft_set_pipapo: .walk does not deal with generations
  netfilter: nf_tables: drop map element references from preparation phase
  netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
  netfilter: nf_tables: fix chain binding transaction logic
  ipvs: align inner_mac_header for encapsulation
====================

Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This reverts commit 1f86123b ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
  SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
  it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
  and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
  sets the socket mark and does require privs.

  Additionally incoming skb->mark may already be visible if
  sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.

  Furthermore, it is easier to block the getsockopt via bpf
  (either cgroup setsockopt hook, or via syscall filters)
  then to unblock it if it requires CAP_NET_RAW/ADMIN.

On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to.  Setting it is privileged,
but retrieving it is not.  We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...

An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...

Note: This is a non-trivial revert, due to later merged commit e42c7bee
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.

Fixes: 1f86123b ("net: align SO_RCVMARK required privileges with SO_MARK")
Cc: Larysa Zaremba <larysa.zaremba@intel.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick Rohr <prohr@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

struct mux_adth actually ends with multiple struct mux_adth_dg members.
This is seen both in the comments about the member:

/**
 * struct mux_adth - Structure of the Aggregated Datagram Table Header.
 ...
 * @dg:		datagramm table with variable length
 */

and in the preparation for populating it:

                        adth_dg_size = offsetof(struct mux_adth, dg) +
                                        ul_adb->dg_count[i] * sizeof(*dg);
			...
                        adth_dg_size -= offsetof(struct mux_adth, dg);
                        memcpy(&adth->dg, ul_adb->dg[i], adth_dg_size);

This was reported as a run-time false positive warning:

memcpy: detected field-spanning write (size 16) of single field "&adth->dg" at drivers/net/wwan/iosm/iosm_ipc_mux_codec.c:852 (size 8)

Adjust the struct mux_adth definition and associated sizeof() math; no binary
output differences are observed in the resulting object file.
Reported-by: Florian Klink <flokli@flokli.de>
Closes: https://lore.kernel.org/lkml/dbfa25f5-64c8-5574-4f5d-0151ba95d232@gmail.com/
Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620194234.never.023-kees@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot managed to trigger a divide error [1] in netem.

It could happen if q->rate changes while netem_enqueue()
is running, since q->rate is read twice.

It turns out netem_change() always lacked proper synchronization.

[1]
divide error: 0000 [#1] SMP KASAN
CPU: 1 PID: 7867 Comm: syz-executor.1 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
RIP: 0010:div64_u64 include/linux/math64.h:69 [inline]
RIP: 0010:packet_time_ns net/sched/sch_netem.c:357 [inline]
RIP: 0010:netem_enqueue+0x2067/0x36d0 net/sched/sch_netem.c:576
Code: 89 e2 48 69 da 00 ca 9a 3b 42 80 3c 28 00 4c 8b a4 24 88 00 00 00 74 0d 4c 89 e7 e8 c3 4f 3b fd 48 8b 4c 24 18 48 89 d8 31 d2 <49> f7 34 24 49 01 c7 4c 8b 64 24 48 4d 01 f7 4c 89 e3 48 c1 eb 03
RSP: 0018:ffffc9000dccea60 EFLAGS: 00010246
RAX: 000001a442624200 RBX: 000001a442624200 RCX: ffff888108a4f000
RDX: 0000000000000000 RSI: 000000000000070d RDI: 000000000000070d
RBP: ffffc9000dcceb90 R08: ffffffff849c5e26 R09: fffffbfff10e1297
R10: 0000000000000000 R11: dffffc0000000001 R12: ffff888108a4f358
R13: dffffc0000000000 R14: 0000001a8cd9a7ec R15: 0000000000000000
FS: 00007fa73fe18700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa73fdf7718 CR3: 000000011d36e000 CR4: 0000000000350ee0
Call Trace:
<TASK>
[<ffffffff84714385>] __dev_xmit_skb net/core/dev.c:3931 [inline]
[<ffffffff84714385>] __dev_queue_xmit+0xcf5/0x3370 net/core/dev.c:4290
[<ffffffff84d22df2>] dev_queue_xmit include/linux/netdevice.h:3030 [inline]
[<ffffffff84d22df2>] neigh_hh_output include/net/neighbour.h:531 [inline]
[<ffffffff84d22df2>] neigh_output include/net/neighbour.h:545 [inline]
[<ffffffff84d22df2>] ip_finish_output2+0xb92/0x10d0 net/ipv4/ip_output.c:235
[<ffffffff84d21e63>] __ip_finish_output+0xc3/0x2b0
[<ffffffff84d10a81>] ip_finish_output+0x31/0x2a0 net/ipv4/ip_output.c:323
[<ffffffff84d10f14>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff84d10f14>] ip_output+0x224/0x2a0 net/ipv4/ip_output.c:437
[<ffffffff84d123b5>] dst_output include/net/dst.h:444 [inline]
[<ffffffff84d123b5>] ip_local_out net/ipv4/ip_output.c:127 [inline]
[<ffffffff84d123b5>] __ip_queue_xmit+0x1425/0x2000 net/ipv4/ip_output.c:542
[<ffffffff84d12fdc>] ip_queue_xmit+0x4c/0x70 net/ipv4/ip_output.c:556

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620184425.1179809-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Power source notify handler is getting registered even when none of the
PMF feature in enabled leading to a crash.

...
[   22.592162] Call Trace:
[   22.592164]  <TASK>
[   22.592164]  ? rcu_note_context_switch+0x5e0/0x660
[   22.592166]  ? __warn+0x81/0x130
[   22.592171]  ? rcu_note_context_switch+0x5e0/0x660
[   22.592172]  ? report_bug+0x171/0x1a0
[   22.592175]  ? prb_read_valid+0x1b/0x30
[   22.592177]  ? handle_bug+0x3c/0x80
[   22.592178]  ? exc_invalid_op+0x17/0x70
[   22.592179]  ? asm_exc_invalid_op+0x1a/0x20
[   22.592182]  ? rcu_note_context_switch+0x5e0/0x660
[   22.592183]  ? acpi_ut_delete_object_desc+0x86/0xb0
[   22.592186]  ? acpi_ut_update_ref_count.part.0+0x22d/0x930
[   22.592187]  __schedule+0xc0/0x1410
[   22.592189]  ? ktime_get+0x3c/0xa0
[   22.592191]  ? lapic_next_event+0x1d/0x30
[   22.592193]  ? hrtimer_start_range_ns+0x25b/0x350
[   22.592196]  schedule+0x5e/0xd0
[   22.592197]  schedule_hrtimeout_range_clock+0xbe/0x140
[   22.592199]  ? __pfx_hrtimer_wakeup+0x10/0x10
[   22.592200]  usleep_range_state+0x64/0x90
[   22.592203]  amd_pmf_send_cmd+0x106/0x2a0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592207]  amd_pmf_update_slider+0x56/0x1b0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592210]  amd_pmf_set_sps_power_limits+0x72/0x80 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592213]  amd_pmf_pwr_src_notify_call+0x49/0x90 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[   22.592216]  notifier_call_chain+0x5a/0xd0
[   22.592218]  atomic_notifier_call_chain+0x32/0x50
...

Fix this by moving the registration of source change notify handler only
when SPS(Static Slider) is advertised as supported.
Reported-by: Allen Zhong <allen@atr.me>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571
Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Tested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.

Fixes: 35c31d5c ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes: 239e754a ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Properly check for RX_DROP_UNUSABLE now that the new drop reason
infrastructure is used. Without this change, the comparison will always
be false as a more specific reason is given in the lower bits of result.

Fixes: baa951a1 ("mac80211: use the new drop reasons infrastructure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: fixes for 6.4

Patch 1 correctly handles disconnect() failures that can happen in some
specific cases: now the socket state is set as unconnected as expected.
That fixes an issue introduced in v6.2.

Patch 2 fixes a divide by zero bug in mptcp_recvmsg() with a fix similar
to a recent one from Eric Dumazet for TCP introducing sk_wait_pending
flag. It should address an issue present in MPTCP from almost the
beginning, from v5.9.

Patch 3 fixes a possible list corruption on passive MPJ even if the race
seems very unlikely, better be safe than sorry. The possible issue is
present from v5.17.

Patch 4 consolidates fallback and non fallback state machines to avoid
leaking some MPTCP sockets. The fix is likely needed for versions from
v5.11.

Patch 5 drops code that is no longer used after the introduction of
patch 4/6. This is not really a fix but this patch can probably land in
the -net tree as well not to leave unused code.

Patch 6 ensures listeners are unhashed before updating their sk status
to avoid possible deadlocks when diag info are going to be retrieved
with a lock. Even if it should not be visible with the way we are
currently getting diag info, the issue is present from v5.17.
====================

Link: https://lore.kernel.org/r/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The MPTCP protocol access the listener subflow in a lockless
manner in a couple of places (poll, diag). That works only if
the msk itself leaves the listener status only after that the
subflow itself has been closed/disconnected. Otherwise we risk
deadlock in diag, as reported by Christoph.

Address the issue ensuring that the first subflow (the listener
one) is always disconnected before updating the msk socket status.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/407
Fixes: b29fcfb5 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Thanks to the previous patch -- "mptcp: consolidate fallback and non
fallback state machine" -- we can finally drop the "temporary hack"
used to detect rx eof.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

An orphaned msk releases the used resources via the worker,
when the latter first see the msk in CLOSED status.

If the msk status transitions to TCP_CLOSE in the release callback
invoked by the worker's final release_sock(), such instance of the
workqueue will not take any action.

Additionally the MPTCP code prevents scheduling the worker once the
socket reaches the CLOSE status: such msk resources will be leaked.

The only code path that can trigger the above scenario is the
__mptcp_check_send_data_fin() in fallback mode.

Address the issue removing the special handling of fallback socket
in __mptcp_check_send_data_fin(), consolidating the state machine
for fallback and non fallback socket.

Since non-fallback sockets do not send and do not receive data_fin,
the mptcp code can update the msk internal status to match the next
step in the SM every time data fin (ack) should be generated or
received.

As a consequence we can remove a bunch of checks for fallback from
the fastpath.

Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At passive MPJ time, if the msk socket lock is held by the user,
the new subflow is appended to the msk->join_list under the msk
data lock.

In mptcp_release_cb()/__mptcp_flush_join_list(), the subflows in
that list are moved from the join_list into the conn_list under the
msk socket lock.

Append and removal could race, possibly corrupting such list.
Address the issue splicing the join list into a temporary one while
still under the msk data lock.

Found by code inspection, the race itself should be almost impossible
to trigger in practice.

Fixes: 3e501490 ("mptcp: cleanup MPJ subflow list handling")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Christoph reported a divide by zero bug in mptcp_recvmsg():

divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018
Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60
RSP: 0018:ffffc90000a07a18 EFLAGS: 00010246
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000040000
RDX: 0000000000000000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 000000000000ffd7 R08: ffffffff820cf297 R09: 0000000000000001
R10: 0000000000000000 R11: ffffffff8103d1a0 R12: 0000000000003f00
R13: 0000000000300000 R14: ffff888101cf3540 R15: 0000000000180000
FS:  00007f9af4c09640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b33824000 CR3: 000000012f241001 CR4: 0000000000170ee0
Call Trace:
 <TASK>
 __tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611
 mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034
 inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861
 ____sys_recvmsg+0x269/0x2b0 net/socket.c:1019
 ___sys_recvmsg+0xe6/0x260 net/socket.c:2764
 do_recvmmsg+0x1a5/0x470 net/socket.c:2858
 __do_sys_recvmmsg net/socket.c:2937 [inline]
 __se_sys_recvmmsg net/socket.c:2953 [inline]
 __x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f9af58fc6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007f9af4c08cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f9af58fc6a9
RDX: 0000000000000001 RSI: 0000000020000140 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000f00 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40
 </TASK>

mptcp_recvmsg is allowed to release the msk socket lock when
blocking, and before re-acquiring it another thread could have
switched the sock to TCP_LISTEN status - with a prior
connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss.

Address the issue preventing the disconnect if some other process is
concurrently performing a blocking syscall on the same socket, alike
commit 4faeee0c ("tcp: deny tcp_disconnect() when threads are waiting").

Fixes: a6b118fe ("mptcp: add receive buffer auto-tuning")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/404Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the mptcp code has assumes that disconnect() can fail only
at mptcp_sendmsg_fastopen() time - to avoid a deadlock scenario - and
don't even bother returning an error code.

Soon mptcp_disconnect() will handle more error conditions: let's track
them explicitly.

As a bonus, explicitly annotate TCP-level disconnect as not failing:
the mptcp code never blocks for event on the subflows.

Fixes: 7d803344 ("mptcp: fix deadlock in fastopen error path")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-06-21

We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).

The main changes are:

1) Fix a verifier id tracking issue with scalars upon spill,
   from Maxim Mikityanskiy.

2) Fix NULL dereference if an exception is generated while a BPF
   subprogram is running, from Krister Johansen.

3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
   from Florent Revest.

4) Fix expected_attach_type enforcement for kprobe_multi link,
   from Jiri Olsa.

5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
   from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Force kprobe multi expected_attach_type for kprobe_multi link
  bpf/btf: Accept function names that contain dots
  selftests/bpf: add a test for subprogram extables
  bpf: ensure main program has an extable
  bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
  selftests/bpf: Add test cases to assert proper ID tracking on spill
  bpf: Fix verifier id tracking of scalars on spill
====================

Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull timer fix from Thomas Gleixner:
 "A single regression fix for a regression fix:

  For a long time the tick was aligned to clock MONOTONIC so that the
  tick event happened at a multiple of nanoseconds per tick starting
  from clock MONOTONIC = 0.

  At some point this changed as the refined jiffies clocksource which is
  used during boot before the TSC or other clocksources becomes usable,
  was adjusted with a boot offset, so that time 0 is closer to the point
  where the kernel starts.

  This broke the assumption in the tick code that when the tick setup
  happens early on ktime_get() will return a multiple of nanoseconds per
  tick. As a consequence applications which aligned their periodic
  execution so that it does not collide with the tick were not longer
  guaranteed that the tick period starts from time 0.

  The fix for this regression was to realign the tick when it is
  initially set up to a multiple of tick periods. That works as long as
  the underlying tick device supports periodic mode, but breaks under
  certain conditions when the tick device supports only one shot mode.

  Depending on the offset, the alignment delta to clock MONOTONIC can
  get in a range where the minimal programming delta of the underlying
  clock event device is larger than the calculated delta to the next
  tick. This results in a boot hang as the tick code tries to play catch
  up, but as the tick never fires jiffies are not advanced so it keeps
  trying for ever.

  Solve this by moving the tick alignement into the NOHZ / HIGHRES
  enablement code because at that point it is guaranteed that the
  underlying clocksource is high resolution capable and not longer
  depending on the tick.

  This is far before user space starts, so at the point where
  applications try to align their timers, the old behaviour of the tick
  happening at a multiple of nanoseconds per tick starting from clock
  MONOTONIC = 0 is restored"

* tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/common: Align tick period during sched_timer setup

Pull virtio fix from Michael Tsirkin:
 "A last minute revert to fix a regression"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  Revert "virtio-blk: support completion batching for the IRQ path"

This reverts commit e7b813b3 (and the
subsequent fix for it: 41a15855 "efi: random: fix NULL-deref when
refreshing seed").

It turns otu to cause non-deterministic boot stalls on at least a HP
6730b laptop.
Reported-and-bisected-by: Sami Korkalainen <sami.korkalainen@proton.me>
Link: https://lore.kernel.org/all/GQUnKz2al3yke5mB2i1kp3SzNHjK8vi6KJEh7rnLrOQ24OrlljeCyeWveLW9pICEmB9Qc8PKdNt3w1t_g3-Uvxq1l8Wj67PpoMeWDoH8PKk=@proton.me/
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fix from Mark Brown:
 "One last fix for SPI, just a simple fix for incorrect handling of
  probe deferral for DMA in the Qualcomm GENI driver"

* tag 'spi-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()

Merge tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple fix for v6.4, some incorrectly specified bitfield masks in
  the PCA9450 driver"

* tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK

Pull regmap fix from Mark Brown:
 "One more fix for v6.4

  The earlier fix to take account of the register data size when
  limiting raw register writes exposed the fact that the Intel AVMM bus
  was incorrectly specifying too low a limit on the maximum data
  transfer, it is only capable of transmitting one register so had set a
  transfer size limit that couldn't fit both the value and the the
  register address into a single message"

* tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: spi-avmm: Fix regmap_bus max_raw_write

Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/
Fixes: cac9e441 ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.

Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.

Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.

Cc: stable@vger.kernel.org # 5.10+
Fixes: cac9e441 ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently allow to create perf link for program with
expected_attach_type == BPF_TRACE_KPROBE_MULTI.

This will cause crash when we call helpers like get_attach_cookie or
get_func_ip in such program, because it will call the kprobe_multi's
version (current->bpf_ctx context setup) of those helpers while it
expects perf_link's current->bpf_ctx context setup.

Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type
only for programs attaching through kprobe_multi link.

Fixes: ca74823c ("bpf: Add cookie support to programs attached with kprobe multi link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org

When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.

In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.

Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:

  - > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
    but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue

  - <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
    which case GNU as will be used

Fixes: 1dc92851 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org

This reverts commit 07b679f7.

This change appears to have broken things...
We now see applications hanging during disk accesses.
e.g.
multi-port virtio-blk device running in h/w (FPGA)
Host running a simple 'fio' test.
[global]
thread=1
direct=1
ioengine=libaio
norandommap=1
group_reporting=1
bs=4K
rw=read
iodepth=128
runtime=1
numjobs=4
time_based
[job0]
filename=/dev/vda
[job1]
filename=/dev/vdb
[job2]
filename=/dev/vdc
...
[job15]
filename=/dev/vdp

i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads
This is repeatedly run in a loop.

After a few, normally <10 seconds, fio hangs.
With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging.
Last message:
fio-3.19
Starting 8 threads
Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s]
I think this means at the end of the run 1 queue was left incomplete.

'diskstats' (run while fio is hung) shows no outstanding transactions.
e.g.
$ cat /proc/diskstats
...
252       0 vda 1843140071 0 14745120568 712568645 0 0 0 0 0 3117947 712568645 0 0 0 0 0 0
252      16 vdb 1816291511 0 14530332088 704905623 0 0 0 0 0 3117711 704905623 0 0 0 0 0 0
...

Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called.
e.g.
PF= 0                         vq=0           1           2           3
[a]request_count     -   839416590   813148916   105586179    84988123
[b]completion1_count -   839416590   813148916   105586179    84988123
[c]completion2_count -           0           0           0           0

PF= 1                         vq=0           1           2           3
[a]request_count     -   823335887   812516140   104582672    75856549
[b]completion1_count -   823335887   812516140   104582672    75856549
[c]completion2_count -           0           0           0           0

i.e. the issue is after the virtio-blk driver.

This change was introduced in kernel 6.3.0.
I am seeing this using 6.3.3.
If I run with an earlier kernel (5.15), it does not occur.
If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail.
e.g.
kernel 5.15 - this is OK
virtio_blk.c,virtblk_done() [irq handler]
                 if (likely(!blk_should_fake_timeout(req->q))) {
                          blk_mq_complete_request(req);
                 }

kernel 6.3.3 - this fails
virtio_blk.c,virtblk_handle_req() [irq handler]
                 if (likely(!blk_should_fake_timeout(req->q))) {
                          if (!blk_mq_complete_request_remote(req)) {
                                  if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
                                           virtblk_request_done(req);    //this never gets called... so blk_mq_add_to_batch() must always succeed
                                   }
                          }
                 }

If I do, kernel 6.3.3 - this is OK
virtio_blk.c,virtblk_handle_req() [irq handler]
                 if (likely(!blk_should_fake_timeout(req->q))) {
                          if (!blk_mq_complete_request_remote(req)) {
                                   virtblk_request_done(req); //force this here...
                                  if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
                                           virtblk_request_done(req);    //this never gets called... so blk_mq_add_to_batch() must always succeed
                                   }
                          }
                 }

Perhaps you might like to fix/test/revert this change...
Martin
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306090826.C1fZmdMe-lkp@intel.com/
Cc: Suwan Kim <suwan.kim027@gmail.com>
Tested-by: edliaw@google.com
Reported-by: "Roberts, Martin" <martin.roberts@intel.com>
Message-Id: <336455b4f630f329380a8f53ee8cad3868764d5c.1686295549.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This reverts commit da9ef50f.

This fixes a regression in which the link would come up, but no
communication was possible.

The reverted commit was also removing a comment about
DP83867_PHYCR_FORCE_LINK_GOOD, this is not added back in this commits
since it seems that this is unrelated to the original code change.

Closes: https://lore.kernel.org/all/ZGuDJos8D7N0J6Z2@francesco-nb.int.toradex.com/
Fixes: da9ef50f ("net: phy: dp83867: perform soft reset and retain established link")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20230619154435.355485-1-francesco@dolcini.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>

PHY address and device address are passed in the wrong order.

Cc: stable@vger.kernel.org
Fixes: 4e4aafcd ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230619094948.84452-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>