Skip to content

L
linux
Switch branch/tag
  1. 24 Apr, 2017 18 commits
  3. 23 Apr, 2017 6 commits
  5. 21 Apr, 2017 16 commits
    • Dan Carpenter's avatar
      lightnvm: don't print a warning for ADDR_EMPTY · 659226eb
      Dan Carpenter authored 
      Reading from ADDR_EMPTY is out of bounds.  The current code generates a
static checker warning because we check for out of bounds "lba" before
we check for ADDR_EMPTY, so the second check is always false.  It looks
like we intended ADDR_EMPTY to be a no-op without printing a warning.

Fixes: a4bd217b ("lightnvm: physical block device (pblk) target")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: default avatarJavier González <javier@cnexlabs.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      659226eb
    • Dan Carpenter's avatar
      lightnvm: potential underflow in pblk_read_rq() · 5bf1e1ee
      Dan Carpenter authored 
      This is a static checker fix, and perhaps not a real bug.  The static
checker thinks that nr_secs could be negative.  It would result in
zeroing more memory than intended.  Anyway, even if it's not a bug,
changing this variable to unsigned makes the code easier to audit.

Fixes: a4bd217b ("lightnvm: physical block device (pblk) target")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: default avatarJavier González <javier@cnexlabs.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      5bf1e1ee
    • Ilya Dryomov's avatar
      block: get rid of blk_integrity_revalidate() · 19b7ccf8
      Ilya Dryomov authored 
      Commit 25520d55 ("block: Inline blk_integrity in struct gendisk")
introduced blk_integrity_revalidate(), which seems to assume ownership
of the stable pages flag and unilaterally clears it if no blk_integrity
profile is registered:

    if (bi->profile)
            disk->queue->backing_dev_info->capabilities |=
                    BDI_CAP_STABLE_WRITES;
    else
            disk->queue->backing_dev_info->capabilities &=
                    ~BDI_CAP_STABLE_WRITES;

It's called from revalidate_disk() and rescan_partitions(), making it
impossible to enable stable pages for drivers that support partitions
and don't use blk_integrity: while the call in revalidate_disk() can be
trivially worked around (see zram, which doesn't support partitions and
hence gets away with zram_revalidate_disk()), rescan_partitions() can
be triggered from userspace at any time.  This breaks rbd, where the
ceph messenger is responsible for generating/verifying CRCs.

Since blk_integrity_{un,}register() "must" be used for (un)registering
the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES
setting there.  This way drivers that call blk_integrity_register() and
use integrity infrastructure won't interfere with drivers that don't
but still want stable pages.

Fixes: 25520d55 ("block: Inline blk_integrity in struct gendisk")
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 4.4+, needs backporting
Tested-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarIlya Dryomov <idryomov@gmail.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      19b7ccf8
    • Rakesh Pandit's avatar
      lightnvm: propagate pblk_init return to userspace · 8d77bb82
      Rakesh Pandit authored 
      From userspace calling ioctl(NVM_DEV_CREATE) was returning ENOMEM for
invalid arguments even though pblk (pblk_init) was returning correctly
-EINVAL to nvm_create_tgt inside core.  This patch propagates the
correct return value to userspace.

Because pblk was introduced recently this only needs to go in 4.12.

Fixes: a4bd217b ("lightnvm: physical block device (pblk) target")
Signed-off-by: default avatarRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      8d77bb82
    • Bart Van Assche's avatar
      blk-mq: Fix preempt count imbalance · abc25a69
      Bart Van Assche authored 
      Avoid that the following kernel bug gets triggered:

BUG: sleeping function called from invalid context at ./include/linux/buffer_head.h:349
in_atomic(): 1, irqs_disabled(): 0, pid: 8019, name: find
CPU: 10 PID: 8019 Comm: find Tainted: G        W I     4.11.0-rc4-dbg+ #2
Call Trace:
 dump_stack+0x68/0x93
 ___might_sleep+0x16e/0x230
 __might_sleep+0x4a/0x80
 __ext4_get_inode_loc+0x1e0/0x4e0
 ext4_iget+0x70/0xbc0
 ext4_iget_normal+0x2f/0x40
 ext4_lookup+0xb6/0x1f0
 lookup_slow+0x104/0x1e0
 walk_component+0x19a/0x330
 path_lookupat+0x4b/0x100
 filename_lookup+0x9a/0x110
 user_path_at_empty+0x36/0x40
 vfs_statx+0x67/0xc0
 SYSC_newfstatat+0x20/0x40
 SyS_newfstatat+0xe/0x10
 entry_SYSCALL_64_fastpath+0x18/0xad

This happens since the big if/else in blk_mq_make_request() doesn't
have final else section that also drops the ctx. Add that.

Fixes: b00c53e8 ("blk-mq: fix schedule-while-atomic with scheduler attached")
Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
Cc: Omar Sandoval <osandov@fb.com>

Added a bit more to the commit log.
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      abc25a69
    • Jens Axboe's avatar
      Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-4.12/block · f8a05a1d
      Jens Axboe authored 
      Christoph writes:

This is the current NVMe pile: virtualization extensions, lots of FC
updates and various misc bits.  There are a few more FC bits that didn't
make the cut, but we'd like to get this request out before the merge
window for sure.
      f8a05a1d
    • Jens Axboe's avatar
      mtip32xx: fix dereference of stack garbage · 95c55ff4
      Jens Axboe authored 
      We need to get the command payload from the request before
we attempt to dereference it.

Fixes: 4dda4735 ("mtip32xx: add a status field to struct mtip_cmd")
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      95c55ff4
    • Junxiong Guan's avatar
      nvme: let dm-mpath distinguish nvme error codes · e02ab023
      Junxiong Guan authored 
      Currently most IOs which return the nvme error codes are retried on
the other path if those IOs returns EIO from NVMe driver. This
patch let Multipath distinguish nvme media error codes and some
generic or cmd-specific nvme error codes so that multipath will
not retry those kinds of IO, to save bandwidth.
Signed-off-by: default avatarJunxiong Guan <guanjunxiong@huawei.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      e02ab023
    • Keith Busch's avatar
      nvme/pci: Poll CQ on timeout · 7776db1c
      Keith Busch authored 
      If an IO timeout occurs, it's helpful to know if the controller did not
post a completion or the driver missed an interrupt. While we never expect
the latter, this patch will make it possible to tell the difference so
we don't have to guess.
Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Tested-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      7776db1c
    • James Smart's avatar
      nvmet_fc: Change traddr field separator to a colon · 43631357
      James Smart authored 
      The FC-NVME spec revised syntax to avoid comma separators.
Sync with the change in the parser for traddr on port attachments.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      43631357
    • James Smart's avatar
      nvme_fc: Add ls aborts on remote port teardown · 8d64daf7
      James Smart authored 
      remoteport teardown never aborted the LS opertions. Add support.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      8d64daf7
    • James Smart's avatar
      nvme_fc: Move LS's to rport · c913a8b0
      James Smart authored 
      Link LS's on the remoteport rather than the controller. LS's are
between nport's. Makes more sense, especially on async teardown where
the controller is torn down regardless of the LS (LS is more of a notifier
to the target of the teardown), to have them on the remoteport.

While revising ls send/done routines, issues were seen relative to
refcounting and cleanup, especially in async path. Reworked these code
paths.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      c913a8b0
    • James Smart's avatar
      nvmet_fc: add missing reference in add_port · 568ad51e
      James Smart authored 
      Add missing reference in add_port
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      568ad51e
    • James Smart's avatar
      nvmet_fc: Rework target side abort handling · a97ec51b
      James Smart authored 
      target transport:
----------------------
There are cases when there is a need to abort in-progress target
operations (writedata) so that controller termination or errors can
clean up. That can't happen currently as the abort is another target
op type, so it can't be used till the running one finishes (and it may
not).  Solve by removing the abort op type and creating a separate
downcall from the transport to the lldd to request an io to be aborted.

The transport will abort ios on queue teardown or io errors. In general
the transport tries to call the lldd abort only when the io state is
idle. Meaning: ops that transmit data (readdata or rsp) will always
finish their transmit (or the lldd will see a state on the
link or initiator port that fails the transmit) and the done call for
the operation will occur. The transport will wait for the op done
upcall before calling the abort function, and as the io is idle, the
io can be cleaned up immediately after the abort call; Similarly, ios
that are not waiting for data or transmitting data must be in the nvmet
layer being processed. The transport will wait for the nvmet layer
completion before calling the abort function, and as the io is idle,
the io can be cleaned up immediately after the abort call; As for ops
that are waiting for data (writedata), they may be outstanding
indefinitely if the lldd doesn't see a condition where the initiatior
port or link is bad. In those cases, the transport will call the abort
function and wait for the lldd's op done upcall for the operation, where
it will then clean up the io.

Additionally, if a lldd receives an ABTS and matches it to an outstanding
request in the transport, A new new transport upcall was created to abort
the outstanding request in the transport. The transport expects any
outstanding op call (readdata or writedata) will completed by the lldd and
the operation upcall made. The transport doesn't act on the reported
abort (e.g. clean up the io) until an op done upcall occurs, a new op is
attempted, or the nvmet layer completes the io processing.

fcloop:
----------------------
Updated to support the new target apis.
On fcp io aborts from the initiator, the loopback context is updated to
NULL out the half that has completed. The initiator side is immediately
called after the abort request with an io completion (abort status).
On fcp io aborts from the target, the io is stopped and the initiator side
sees it as an aborted io. Target side ops, perhaps in progress while the
initiator side is done, continue but noop the data movement as there's no
structure on the initiator side to reference.

patch also contains:
----------------------
Revised lpfc to support the new abort api

commonized rsp buffer syncing and nulling of private data based on
calling paths.

errors in op done calls don't take action on the fod. They're bad
operations which implies the fod may be bad.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      a97ec51b
    • James Smart's avatar
      nvme_fcloop: split job struct from transport for req_release · ce79bfc2
      James Smart authored 
      Current design has the fcloop job struct, used for both initiator and
target processing, allocated as part of the initiator request structure.
On aborts, the initiator side (based on the request) may terminate, yet
the target side wants to continue processing. the target side can't do
that if the initiator side goes away.
Revise fcloop to allocate an independent target side structure when it
starts an io from the initiator.

Added a lock to the request struct as well to synchronize pointer updates
on abort calls.

Modified target downcalls to recognize conditions where initiator has
aborted the io (thus nulled the pointer between job structs), thus
avoid referencing sgl lists which are gone and no longer making upcalls
to the initiator.

In conditions where the targetport is no longer connected, have the
initiator return an access failure rather than simulating a command
completion.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      ce79bfc2
    • James Smart's avatar
      nvmet_fc: add req_release to lldd api · 19b58d94
      James Smart authored 
      With the advent of the opdone calls changing context, the lldd can no
longer assume that once the op->done call returns for RSP operations
that the request struct is no longer being accessed.

As such, revise the lldd api for a req_release callback that the
transport will call when the job is complete. This will also be used
with abort cases.

Fixed text in api header for change in io complete semantics.

Revised lpfc to support the new req_release api.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      19b58d94
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7